Cannot image more than one computer simulteneously

When I try to image more than one computer simulteneously, the computer
freezes. I have Zenworks for desktops Ver 6.5 and netware 6.5.
Please help!
Thanks,
Mike

Jared,
The workstation freezes. The imaging process freezes as soon as I start
imaging another workstation.
Thanks,
Mike
> mmbugi,
>
> > When I try to image more than one computer simultaneously, the
computer
> > freezes. I have Zenworks for desktops Ver 6.5 and netware 6.5.
>
> The server freezes or the workstation? Multicast or just simple image
pull.
>
> --
> Jared Jennings
> Data Technique, Inc.
> Novell Support Forums Sysop
> http://wiki.novell.com
>

Similar Messages

Airport extreme cannot connect more than one computer

Hi,
I just got a new cable internet connection but have major problems with my airport extreme. I can be online via airport but I can not connect any other devices wirelessly (including other laptops).
The connection works only when 'distribute a range of IP addresses' is selected in airport utility. Choosing 'share a public IP address' results in no internet access whatsoever. I tried soft- and hardresetting the base station with no luck.
Any ideas?

It sounds like your cable modem needs to be reset.
Most cable modems require that you power them off/on whenever you switch the Ethernet connection from one device to another. When the cable modem is powered on, it finds the new device and talks to it.
Some cable modems have a button on the back to do the reset. Some cable modems have an internal battery which must be removed to do the reset. Some cable modems must be off overnight (or at least several hours) so that equipment back at the ISP can be reset.
"Share a public IP address" is the setting that you want to use.

Cannot run more than one instance of a remote app in remote desktop services Server 2012

All,
I installed "Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style" using the instructions here http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
I need to set up an image viewing program (Olyvia) to allow students using Macs and iPads access to this windows only application in order for them to get their work done. We may have 12 or more students accessing and trying to run the Olyvia application
at any one time.
All works good, except that I cannot run the Olyvia application (setup as a remoteapp program) more than one instance at a time. That is, when I start up "olyvia" on a Mac, it works great. If I leave it up and running, and then try
and start up "olyvia" on an iPad (using different accounts), I get the following error message:
"Cannot run more than one instance of this program simultaneously. Either the program is already running, or it has not been terminated completely."
I need to understand the root issue.
1. Is this a licensing issue? So, I need to add some CALs to the RDS server?
2. Is this a application issue with "olyvia"? So, no matter what I do, it is not going to be able to be used by more than one person at a time when configured as a remoteapp?
3. Did I not "publish" the application correctly?
4. Is this happening because I followed the "quick start" guide?
Appreciate any help I can get on this. We have no problem getting CALs, I just need some help with the root issue.
Thanks,
Geoff Weatherford
CVMBS, CSU

Hi Geoff,
Each application uses different techniques for determining if multiple instances are running. If you can determine what method it is using then perhaps you could use App-V or other virtualization software.
In the best case you really should direct your question to the maker of Olyvia. The reason I said that is they specifically designed their software to prevent multiple instances, so the first question is, why? Is it related to Licensing?
Compatibility? If you knew the specific reason(s) why they are doing it and the technique used then at the point using a virtualization technique may be the best option.
-TP

Can't use the iPod on more than one computer!!!!!!!

Ok, This has got me so frustrated! We got an iPod and installed iTunes. We thought we had it figured out - we purchased music from iTunes, played it on the iPod and everything was great. Then plugged the iPod into my other computer to listen to our music and it won't freakin' play! says the computer is "Not Authorized" and suggests that by 'authorizing' the 2nd computer, it will overwrite the songs that are already on the iPod. This is NOT desirable. We've downloaded and installed iTunes onto the 2nd computer and used the same login account that we used on the first computer.
What gives!?!?! I thought this was supposed to be easy, but it's not! I was hoping for a quick and simple "plug it in and start listening to music." This is definately not quick and simple. Albeit, I'm new to this iPod craze, but this shouldn't be so difficult. I've poked around on the website and cannot seem to find an answer to this.
HELP!!!!
Thanks
oh btw, Is anyone else getting annoyed by Apple's rediculous attempt at monopolizing this market by forcing us to use thier own proprietary software?!?!

First of all, any computer that plays purchased content must be authorized. This can be accomplished by opening iTunes, then store>authorize computer. If you wish to use your iPod on more than one computer & not have your iPod content erased, you will have to have your iPod preferences set on "manually manage". See the following link.
http://docs.info.apple.com/article.html?artnum=61675
Also, it's not only Apple that uses proprietary software. How about Zune players, & several others?
Message was edited by: StarDeb55
Message was edited by: StarDeb55

Can I use my lightroom 5 CD on more than one computer? Toshiba to my new Mac Book Pro?

I have Lightroom 5 CD that I've used for 2 years in my Toshiba laptop. I have a new Mac Book Pro and was wondering if I purchase an external CD for it, can I use my software on my new computer. I wasn't sure if it can be used on more than one computer...It doesn't say on the software box.
Thank you so much!

There are normally three options: License, buy or try. See image below.
Did you double click on the package in downloads to start the installation?

Can I run my creative cloud for teams on more than one computer?

Can I run my creative cloud for teams on more than one computer?

Hi Nick,
We would like to inform you that you can install and activate the subscription on 2 machines, however, you cannot use both of them at the same time.
Kindly check the point 1.1 from the below mentioned link.
http://wwwimages.adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-2015 0407_2200.pdf
Thanks,
Atul Saini

How can I synchronize safely from more than one computer?

First, I have set up my iPod to work with two computers: my primary computer, which is my desktop at home. Later, I also "authorized" my laptop (as a secondary source) to also be able sync to my iPod.
My question is that when I go to synchronize some podcasts I just downloaded to my secondary computer (my laptop), I get the following prompt: "Are you sure you want to sync podcasts? All existing podcsts on the iPod '<my iPod's name>' will be replaced with podcasts from your iTunes library."
From this message, since my iPod is plugged into my laptop, I assume it's referring to my iTunes library on my laptop (which only has the few podcasts I just downloaded). And it sounds like it's going to delete the podcasts that are already on my iPod.
I definitely don't want it to "replace" the ones I already have sync'd from my home computer; +_I just want to add the ones I have downloaded to my laptop._+ How can I make it so I can safely add the new ones without disturbing those I already have sync'd and want to keep? I'm a bit confused about how syncing works when you have more than one computer to sync to the iPod.

You cannot do what you want.
The ipod touch can sync with ONE computer/library at a time.
When you sync to a different computer/library, the ipod touch will first delete the current itunes content form the iphone, then it will sync the content from the new computer.
This is the way it is designed.

Can you install logic express on more than one computer

can you install logic express on more than one computer ?

Be sure to read the End User Licensing Agreement for questions of this nature. You are allowed to install Logic on two computers that you own, for example an iMac and a MacBook Pro. You cannot, however, use the two computers at the same time if they are on the same network. You can use one computer as a Logic Node to shift some of the processing load (which you would likely do with an ethernet cable) but you don't need to have a full installation of Logic on the Node machine, just the Logic Node installation. The idea of allowing two installations is so that you might take advantage of a portable computer in the field for on-site recording then later transfer those files to a desktop studio set up for further editing.

More Than One Computer Trying to Access Web = Very Slow Download Speeds?

We have Verizon DSL with a basic Westell modem, which supposedly is only a modem with no router capabilities. We have an Airport Extreme Snow Base Station that acts as a WDS Main, with one other AEB Snow as a WDS Remote. All computers have unique ip addresses in the 10.0.1.X range as provided by the WDS Main's DHCP.
When only one computer connects to the internet to download web pages, software updates, etc., there seems to be no problem at all. When I do a speed check I get results that seem to be in the correct range, and it doesn't matter which computer I use for the test.
However, if we try to access the internet with more than one computer at the same time, everything slows to a crawl. Such as, if one computer is downloading software updates, the other CPUs have super slow web page downloads, slow to the point of connection time-outs at times. Or if two of the computers are simply trying to download web pages at the same time, one or the other has super slow downloads.
I feel like there is some kind of routing problem with the Base Station but for the life of me I cannot figure it out.
What could the problem be? Where could it originate, and what, if any, advice could someone give me to help trace the problem?
Thanks in advance.

... the one computer I am looking at right now shows DNS servers as 10.0.1.1, which is the internal ip address of the AEB. Could this be part of the problem?
That is normal and shouldn't cause a problem. Essentially it tells the computer to ask the snow AirPort base station (ABS) for DNS information. The ABS will then provide the DNS information which it currently received from the ISP.
Would it help if I manually entered the DNS numbers that appear on the AEB on each machine's Network Preferences?
Probably not. A busy DNS server or faulty DNS info won't affect download speeds. That only affects browsing since that requires the computer to convert human readable addresses to numbers that the computer can use.
Remember that the snow ABS only operates at 802.11b (11 Mbps) speeds. Then when you use WDS it cuts your available wireless bandwidth in half.

Can Final Cut Pro 7 be installed on more than one computer?

I am looking to purchase a Final Cut product, maybe Final Cut Pro 7, and wondering how many computers I can install the software on. I'm doing some basic video editing stuff for a sketch comedy team and we use more than one computer at times for editing.
Thanks

You can install on (1) Tower and (1) Laptop, as long as they are both used by you, and NOT at the same time. This is for when you edit on your tower, but then need to edit at home, or on the road. You cannot use one copy of FCP on multiple machines at the same time. You need one copy for each machine you intend to use at the same time.

Can't use more than one computer

It appears to be impossible to use more than one computer with the shuffle.
Connecting to another computer results in choosing between erasing the library and linking to the second computer's library or not mounting the iPod.
I did not expect this behavior and it is very deceptive.
Tech support seems unable to figure it out. If it can't do it then the techs should say so and the literature should so indicate it
Very unlike what I expect from Apple

Apple cannot aid in the ability to load entire music
libraries from different computers onto one pod as it
would be prone to copyright infringement abuse. That
is why what you are requesting to be done is not
automatic through iTunes.
I understand that. My daughter downloaded purchased music using her sister's computer and the gift card from her sister whom she was visiting on their shared birthdays .
I agree that tech support should just told you
directly what you wanted to know but you are equally
at fault for assuming this ability ever existed
without doing 5 minutes of research.
A simple google of the terms would have yielded the
answer you wanted.
When she got home she wanted some help putting some more music on her shuffle (a gift from us) from a cd of a friend's local band to use during her last chemo treatment the next day. Her Mac is running 8.6 so she asked me to do it for her.
I dragged the files and dropped them on the ipod icon for her thinking that would be the simple Apple way.
Couldn't play them, though I could see them. Couldn't see the purchased music (when double clicking the icon) but could hear the music. That started the search.
I do appreciate the copyright issue but Apple tech should have known the answer right away, not after the fourth tech contact. No where does it state simply that one cannot do this and I don't agree that I am at fault to assume that I could.
Subject closed.
TiBook 15 1 gHz

Photoshop on more than one computer with my one subscription price?

I have a monthly subscription for Photoshop CS6. Am I able to download and use Photoshop on more than one computer with my one subscription price?

Also, I have no registered products. I thought my CS6 would have shown up s a registered product. Is this why I cannot find a serial number? I apologize for dragging this on but I simply can't figure this one out.
Also, I read that adobe is no longer updating CS6. And on the Creative Cloud app it doesn't even give the option to download CS6 as a trial. It only offers CC to trial. Should I be doing that?
Thank you again.

Using photoshop on more than one computer

I purchased Photoshop CS6 for my home Mac several months ago. I am about to buy my daughter a Mac. Will I be able to install photoshop on her computer, too? Can I use it on more than one computer in the same household?

You can "install" it on two computers, but the End User License Agreement stipulates that you cannot run it on both at the same time.

Licensing on more than one computer

I have Final Cut Pro studio installed on my desktop mac. Can I also install in on my laptop?
Also, does anyone know how well Final Cut studio will run on a MacBook 2.0GHz Intel Core 2 Duo.
Thanks!

You can find all Apple SLA's here: http://images.apple.com/legal/sla/
http://images.apple.com/legal/sla/finalcutstudio51.pdf
2. Permitted License Uses and Restrictions.
A. Apple Software (Bundle)
This License allows you to install and use one copy of the Apple Software on one Apple-labeled desktop computer and one Apple-labeled laptop
computer so long as both computers are owned and used by you. The Apple Software may be used to reproduce materials so long as such use is limited
to reproduction of non-copyrighted materials, materials in which you own the copyright, or materials you are authorized or legally permitted to
reproduce. This License does not allow the Apple Software to exist on more than one computer at a time, and you may not make the Apple Software
available over a network where it could be used by multiple computers at the same time. You may make one copy of the Apple Software in machine-
readable form for backup purposes only; provided that the backup copy must include all copyright or other proprietary notices contained on the original.

How do i have more than one computer to apple tv

how do i have more than one computer to apple tv

My answer is based on guessing what your question is since it seems a little incomplete.
When enabling home sharing with an Apple ID on your Apple TV, this can be done with one Apple ID only. Now when enabling home sharing on your iTunes device you need to use the same Apple ID. You can do this with several devices, however the Apple TV will always only find the first device that comes online since it cannot differentiate between different home sharing devices with the same Apple ID.
When using AirPlay you just need to be on the same network with your device. For example I can go to my best friend and watch my movie there on his Apple TV and vice-versa unrelated from the fact that we use different Apple IDs of course.
I hope this answers your question.

Cannot image more than one computer simulteneously

Similar Messages

Maybe you are looking for