Cannot impersonate user for data source 'SMSDB'. --- Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Log on failed. ---

After Upgrading from SCCM 2012 Sp1 to SCCM 2012 R2 we are getting following error:
System.Web.Services.Protocols.SoapException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException:
Cannot impersonate user for data source 'SMSDB'. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Log on failed. ---> System.Runtime.InteraopServices.COMException: The referenced account is currently locked out and may not
be logged on to. (Exception from HRESULT: 0x80070775)
   at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
   at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Microsoft.ConfigurationManagement.ManagementProvider.SmsException
An error has occurred during report processing.
Stack Trace:
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
System.Web.Services.Protocols.SoapException
System.Web.Services.Protocols.SoapException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException:
Cannot impersonate user for data source 'SMSDB'. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Log on failed. ---> System.Runtime.InteropServices.COMException: The referenced account is currently locked out and may not
be logged on to. (Exception from HRESULT: 0x80070775)
   at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
   at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Stack Trace:
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)

HI,
Check the SQL Reporting services account that is used, the one that you supplied when setting up the SQL Reporting Services point in the Configuration Manager 2012 console, it seems to be locked out.
I believe it has been asked once before on the forums as well.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Similar Messages

Lync monitoring Details reports are not getting opened, Getting SQL error like "Cannot impersonate user for data source 'CDRDB"

Hi,
Two month before, We have deployed Lync 13 set up with lync monitoring and archiving service enabled. After configuring we have the Lync monitoring and archiving services are working fine... few weeks back I have changed the Admin Password
of the Lync Setup. After that Lync Monitoring and Archiving services are not working.
when I try open Lync monitoring service from web UI,
http://localhost/ReportServer_LyncMonitoring/
Web UI is opening but Reports home page is not Accessible , Getting error Like
"An error has occurred during report processing. (rsProcessingAborted)
Cannot impersonate user for data source 'CDRDB'. (rsErrorImpersonatingUser)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect"
Please help me to trouble shoot this problem.
Thanks,
Rajarajan.D

Hi Rajarajan.D
You probably need to update the password against the CDRDB datasource in SSRS Report manager, take a look at this article: http://lyncme.co.uk/microsoft-lync-server-2013/cannot-impersonate-user-for-data-source-cdrdb-rserrorimpersonatinguser-error/
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerStorageException

hello all,
Actually , i had raised this quetion in past but had not satisfied with the answers.
explaining in brief this time so , can get actual cause of this.
I have two reports subscriptions on same time ..
subscriptions executed fine on some day and throws error sometimes ..
have a look at log files..
---events started .... imporatant events status as per my understanding
library!WindowsService_1!8d0!02/07/2015-10:30:04:: i INFO: RenderForNewSession('/EDP_Reports/HR And Admin/HR_yesterday_Missing_Punch_Report_005')
library!WindowsService_1!ab0!02/07/2015-10:30:04:: i INFO: RenderForNewSession('/EDP_Reports/Sales/SA_Stagewise_Completed_Files_Report-002')
setting default values Configuarions..
---library!WindowsService_1!ab0!02/07/2015-10:30:05:: i INFO: Initializing ChunkSegmentSize to default value of '32320' Bytes because it was not specified in Server system properties.
library!WindowsService_1!8d0!02/07/2015-10:30:06:: i INFO: Initializing ResponseBufferSizeKb to default value of '64' KB because it was not specified in Server system properties.
library!WindowsService_1!ab0!02/07/2015-10:30:09:: i INFO: Initializing SessionTimeout to '600' second(s) as specified in Server system properties.
library!WindowsService_1!8d0!02/07/2015-10:30:12:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerStorageException: , An error occurred within the report server database. This may be due to a connection failure,
timeout or low disk condition within the database.;
emailextension!WindowsService_1!8d0!02/07/2015-10:30:12:: e ERROR: Error sending email. Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerStorageException: An error occurred within the report server database. This may be due to a connection
failure, timeout or low disk condition within the database.
---> System.Data.SqlClient.SqlException: Transaction (Process ID 59) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
notification!WindowsService_1!8d0!02/07/2015-10:30:12:: e ERROR: Error occured processing subscription 2dc49fc1-f7e2-4bd6-a0b9-5ee846db6906: Failure sending mail: An error occurred within the report server database. This may be due to a connection
failure, timeout or low disk condition within the database.Mail will not be resent.
please, explain me the cause why this is happening is it deadlock or what??
and are my default value stated above are effiecient to perform tasks ..
i.e. SessionTimeout to '600' second(s) etc.
help must appreciated ..
Dilip Patil..

Hi Dilip,
The error message "An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database", the issue can be caused by many factors, usually occurs due to large size
or bad rows of some tables in the ReportServerTempDB database.
If we view the script of the CleanExpiredSessions stored procedure of the ReportServer database, we can see that it first grabs 20 records from the ReportServerTempDB.dbo.SessionData table and then removes those from the ReportServerTempDB.dbo.SessionLock
table. If there are bad rows in the SessionData table, the CleanExpiredSessions functionality may encounter an issue. Here, I suggest that you clean the SessionData table as well as the SessionLock table, and check the issue again.
Please also try to apply the latest service pack according to your SQL Server Reporting Services version.
Did the subscription failed many times? If possible, please also try to recreate the subscription.
Similar thread for your reference:
SSRS 2008: connection failure, timeout or low disk
condition within the database. (rsReportServerDatabaseError)
Inconsistent EMail Subscription
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Failed to close connection for data source "EntityDataSource"

Hi All,
I have deployed some PowerView reports on SharePoint 2013.
I have open it on sharepoint, wait for 5 mins & then I try to change any filter then I am getting following error as
Failed to close connection for data source "EntityDataSource"
Error Text:
<detail>
<ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsErrorClosingConnection</ErrorCode>
<HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus>
<Message xmlns="http://www.microsoft.com/sql/reportingservices">Failed to close connection for data source 'EntityDataSource'.</Message>
<HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorClosingConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink>
<ProductName xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName>
<ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion>
<ProductLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</ProductLocaleId>
<OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem>
<CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId>
<MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices">
<Source>Microsoft.ReportingServices.ProcessingCore</Source>
<Message msrs:ErrorCode="rsErrorClosingConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorClosingConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Failed to close connection for data source 'EntityDataSource'.</Message>
<MoreInformation><Source></Source><Message>For more information about this error navigate to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation><Warnings
xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Is it because of Session Timeout?or may be something else
Thanks in advance.

Hi Rameshwar,
Pleaese help to collect SharePoint ULS Log related to this issue for further investigation, please see:
Configure and View SharePoint Log Files and Diagnostic Logging (PowerPivot for SharePoint):
http://technet.microsoft.com/en-us/library/ee210652.aspx
In addition, could you please elaborate this issue with more deail how this issue happened? Are you encountered this issue while you view the Power View report on SharePoint site?
Regards,
Elvis Long
TechNet Community Support

Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

When opening a form in SharePoint 12013 that was created from Infopath 2013, I get the following error.
You do not have permissions to access a database that contains data required for this form to function correctly.
An entry has been added to the Windows event log of the server.
Log ID:5566
When I go to the log files on the SharePoint server. I see the following error.
Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
I am guessing this has something to do with the UDCX connection and the database.
Can anyone help me get this fixed?

Hi Jim,
Please check the following kb article when it occurs 5566errro with the UDCX conection file, try the method of using the Secure Store Service to store alternate credentials for the data connection method, or the method of stating the credentials
in the UDC file explicitly.
Also check if it could help with setting sql server as "SQL Server and Windows Authentication mode".
http://support.microsoft.com/kb/981684
Thanks
Daniel Yang
TechNet Community Support

REG:USER EXIT FOR DATA SOURCE 0HR_LSO_1

Hi ,
I have to write the enhancement ABAP code for data source 0HR_LSO_1 which is related to module " training and event management "(also known as LMS or LSO) in ECC 6.0 .
So how can I find out appropriate user exit for the same .I have to concentrate on the field "kostl (cost centre)" in that data source .
Please provide some suggestions .
Thanking You ,
Tarun Brijwani .

Hi Tarun...
I this might help you.
In the HR System:
1) T-CODE: CMOD
2) Choose an existing project (vg: Z12345)
3) Modify
4) Press Components button
5) Look for the enhance: RSAP0001 (the BW extracting enhancement)
6) The you have one of the following option:
a- If the Data Source is "transaction data": The exit is "EXIT_SAPLRSAP_001"
b- If the Data Source is "master data": The exit is "EXIT_SAPLRSAP_002"
7) double-click in the appropriate one
8) You'll see an INCLUDE sentence. Could be this ZXRSAU01 or this ZXRSAU02 (depending on the previous step). Double-click and you'll be redirected to the SE38
9) some code:
CASE i_datasource
WHEN '0HR_LSO_1'.
    LOOP i_t_data INTO my_struct
       my_struct-KOSTL           "Here you'll must have your Cost Center
       ...etc...etc...etc
    ENDLOOP.
WHEN OTHERS.
ENDCASE
Hope it helps.
gdmon

User exit for data source 0HR_LSO_1

Hi ,
I have to write the enhancement ABAP code for data source 0HR_LSO_1 which is related to module " training and event management "(also known as LMS or LSO) in ECC 6.0 .
So how can I find out appropriate user exit for the same .I have to concentrate on the field "kostl (cost centre)" in that data source .
Please provide some suggestions .
Thanking You ,
Tarun Brijwani .

Hi Tarun...
I this might help you.
In the HR System:
1) T-CODE: CMOD
2) Choose an existing project (vg: Z12345)
3) Modify
4) Press Components button
5) Look for the enhance: RSAP0001 (the BW extracting enhancement)
6) The you have one of the following option:
a- If the Data Source is "transaction data": The exit is "EXIT_SAPLRSAP_001"
b- If the Data Source is "master data": The exit is "EXIT_SAPLRSAP_002"
7) double-click in the appropriate one
8) You'll see an INCLUDE sentence. Could be this ZXRSAU01 or this ZXRSAU02 (depending on the previous step). Double-click and you'll be redirected to the SE38
9) some code:
CASE i_datasource
WHEN '0HR_LSO_1'.
    LOOP i_t_data INTO my_struct
       my_struct-KOSTL           "Here you'll must have your Cost Center
       ...etc...etc...etc
    ENDLOOP.
WHEN OTHERS.
ENDCASE
Hope it helps.
gdmon

Issue with table ROOSPRMSF entries for data source 0FI_AP_4

Hi Experts,
I am facing with an issue where we found incosistencies with table ROOSPRMSF in R/3 system.
In BW , we have done initializations based on fiscal period selections (none of the selections overlap) for data source 0FI_AP_4.
We have done in total 7 initializations. So in BW system in table RSSDLINITSEL we have 7 initialization requests.
But in R/3 system we have 49 records for data source 0FI_AP_4 in ROOSPRMSF table out of which 42 are invalid records.
I suspect that these 42 invalid records are created due to the execution of program RSSM_OLTP_INIT_DELTA_UPDATE when the tables ROOSPRMSF are actually holding the 7 initialization request entries. Due to this each and every initialization request is linked to rest of the other intialization requests and ended with 49 records in table ROOSPRMSF table.
Now our data loads are running fine but daily a short dump is raised . In the daily loads, BW init records in RSSDLINITSEL are compared with ROOSPRMSF entries and all the other 42 records which are invalid are written into system log and a short dump is raised.
In order to fix these inconsistencies i checked for OSS note 852443. (Point 3 in OSS note)
But it is specified to delete the delta queue for data source 0FI_AP_4 in RSA7 and instructed to execute the program RSSM_OLTP_INIT_DELTA_UPDATE so that the ROOSPRMSF table will be reconstructed with valid records available in RSSDLINITSEL.
From OSS note 852443 point 3
"3. If the RSSDLINIT table in the BW system already contains entries, check the requests listed there in the RNR column in the monitor (transaction RSRQ). Compare these entries with the entries in the ROOSPRMSF and ROOSPRMSC tables with the INITRNR field. If, in the ROOSPRMSF and ROOSPRMSC tables for your DataSource source system combination, there are more entries with different INITRNR numbers, use transaction RSA7 in an OLTP source system to delete all entries and then use the RSSM_OLTP_INIT_DELTA_UPDATE report mentioned in the next section. For a DataMart source system, delete the entries that you cannot find in the RSSDLINIT table using the procedure described above."
My question is if we delete the delta queue in RSA7 then all the tables in R/3 (ROOSPRMSF, ROOSPRMSC, Time stamp table) and BW (RSSDLINITSEL, initialization requests will be deleted) will be cleared. Then how will the program RSSM_OLTP_INIT_DELTA_UPDATE copy entries into ROOSPRMSF table in R/3 ?
Could any one please clarify this ?
Thanks
Regards,
Jeswanth

Hi Amarnath,
Did you unhide the new field in RSA6 and regenerated the DataSource?
Often SAP will populate newly added fields (belonging to the same (set) of table(s) used for extraction) automatically (e.g. SAP uses 'move-corresponding' in it's extractor-code, or, in this case, reading all fields from the DD, FM BWFIU_TRANSFORM_FIELDLIST).
If the DataSource looks fine to you and the field is still not populated in RSA3 you can't go without a user-exit.
Grtx,
Marco

GRC 10 - Legacy connector as user detail data source

Hello,
I'm trying to use a legacy connector (with a text file as input) as a user data-source.
Repository user sync for this legacy connector works : checked GRACUSER table, it is populated with all the user details from the input file (id,firstname,lastname,mail,department,phone
I got it working for user search data source : when creating an access request for "other" user, searching for a user ID/name works : data are displayed in search result, however when I select the user from the serach result the user details are not populated in an access-request form.
Any clue about this ? Any one already got this working ?
GRC 10.0 SP13.
Checked SP14 and SP15 release notes, and found no relevant notes yet.
repository-related notes applied :
-1864423
-1950231
Regards,
Emmanuel.

Hi Pedro,
You only have confirmed that 2 accounts are maintained in HCM and in SU01 as well, so you would be able to see these accounts' details both ways.
Yes, you are right about user account maintenance first in HCM at the time of new hire, then you can manually raise the access request to grant them access to various SAP systems. Or in order to automate this process as Prasahant suggested, you can take help from HR Triggers.
You can refer: GRC 10.0 - HR Trigger configuration - Governance, Risk and Compliance - SCN Wiki
But responding to your original discussion, whatever user accounts are maintained in HCM you would see those details provided you define HR for the "user search data source" AND from SU01 for "user detail data source"
In your case you have 2 accounts which have been maintained in HCM as well as SU01, so that is what creating confusion for you.
Let us know if you need any more clarifications.
Regards,
Ameet

ODBC call SQLDriverConnect for data source Server name failed: [ . Notify Customer Support.

Need help !
While running DS job through designer we are getting below error:
ODBC call <SQLDriverConnect> for data source <SErver name> failed: <[>. Notify Customer Support.
Additional notes:
1. Source and Target datastore are getting connected properly as i have imported table's definition using it.
2. Source and target data store pointing to SQL server 2008 R2 express edition DB (64 bit).
3. It seems like server machine has both 32bit and 64bit drivers installed on it. Please refer attached driverdetails.jpg file for more details.
Thanks

Hi did you referred this :
ODBC call <SQLDriverConnect> for data source <MyComputer\SQLServer2008R2> failed: <[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.>. Notify Customer Support.

User Details Data Source

Hello all,
I´m working to configure the user search data source and also user details data source from our GRC AC environment. Bellow my doubt:
Can I configure GRC AC to automatically fill the Manager field in the access request screen? Obviously the User Details Data Source must be configured. Is it possible using SU01? HR? LDAP? All of them? Some examples would be really appreciated.
In other words:
When an Access Request is made, I want all User Details filled automatically, including the Manager.
Regards,
SAP Legend

Hi,
Yes you can configure the manager look up functionality by configuring the detail data source in the IMG and make sure you do all the configurations respective to what data source you are using.
If you are using LDAP then make sure you have done the mapping for your AC field name and target system field name and all the LDAP related configurations.
If you are using HR system as the data source please check the below link.
Configure Manager Look-Up in ARM for GRC 10
Regards,
Neeraj

OWB 10g -- Can't Create Database Links for Data Source and Target

We installed OWB 10g server components on a Unix box running Oracle 10g (R2) database. The Designer Repository is in one instance. The Runtime Repository and the Target are in another instance. The OWB client component was installed on Windows XP. We create a data source module and a target module in OWB. The data source is on another Unix box running Oracle 9i (R2) database. We try to create database links for data source module and target module, respective. But when we created and tested the DB links, the DB links were failed.
For the database link of data source, we got the following error message:
Testing...
Failed.
SQL Exception
Repository Error:SQL Exception..
Class Name: CacheMediator.
Method Name: getDDEntryFromDB.
Repository Error Message: ORA-12170: TNS:Connect timeout occurred
For the database link of target , we got the following error message:
Testing...
Failed.
API2215: Cannot create database link. Please contact Oracle Support with the stack trace and the details on how to reproduce it.
Repository Error:SQL Exception..
Class Name: oracle.wh.ui.integrator.common.RepositoryUtils.
Method Name: createDBLink(String, String, String, String).
Method Name: -1.
Repository Error Message: java.sql.SQLException: ORA-00933: SQL command not properly ended.
However, we could connect to the two databases (data source and target) using the OWBs utility SQL Plus.
Please help us to solve this problem. Thank you.

As I said prior the database link creation should work from within the OWB client (also in 10).
Regarding your issue when deploying, have you registered your target locations in the deployment manager and did you first deployed your target location's connector which points out to your source?
I myself had some problems with database link creations in the past and I can't remember exactly what they were but it had something to do with
- the use of abnormal characters in the database link name
- long domain name used in as names.default_domain in my sqlnet.ora file
What you can do is check the actual script created when deploying the database link so see if there's something strange and check if executing the created script manually works or not.

User Details Data Source in CUP 5.3

Dear GRC Gurus,
Iam configuring CUP 5.3., in the User data source (which is used to fetch users,approvers,managers from backend) there is User Details Data Source -> i select SAP and i get the system name -> There is a Field Function Template -> there are two options, standard and Custom.
What is the use of Function Template ?
What is standard and Custom?
If we select Custom, what should we enter in Function Template Name?
Can you please clarify
Thanks a lot...
Regards
Selva

Hi,
The user data source only reads the user details for use in defaulting the information into request forms / workflow.
I believe that the function template just tells the system whether to use standard fields within the SAP user master or whether you have requirements to use alternative field mappings.
I don't think that the custom template name matters as it is identified.
I must admit that I haven't used it so I may be wrong but that is my current understanding!
Regards, Simon
Edited by: Simon P Persin on Oct 26, 2009 4:40 PM

GRC AC - HCM as user search data source

Hello all,
I´ve configured GRC AC to user HCM as user search data source and also user details data source. During my user change tests through the "Access Request" function, I noticed that only existent users at SU01 and HCM (checked through PA30) appear in the access request User Selection. Existent users at HCM but not at SU01 doesn´t appear.
Someone can tell me why? I mean, if I configured the user search to use HCM as data source, shoudn´t it bring all HCM users regardless of his existence at SU01?
Thanks in advance,
Pedro

Hi Pedro,
You only have confirmed that 2 accounts are maintained in HCM and in SU01 as well, so you would be able to see these accounts' details both ways.
Yes, you are right about user account maintenance first in HCM at the time of new hire, then you can manually raise the access request to grant them access to various SAP systems. Or in order to automate this process as Prasahant suggested, you can take help from HR Triggers.
You can refer: GRC 10.0 - HR Trigger configuration - Governance, Risk and Compliance - SCN Wiki
But responding to your original discussion, whatever user accounts are maintained in HCM you would see those details provided you define HR for the "user search data source" AND from SU01 for "user detail data source"
In your case you have 2 accounts which have been maintained in HCM as well as SU01, so that is what creating confusion for you.
Let us know if you need any more clarifications.
Regards,
Ameet

Cannot connect to JDBC data source

We are trying to configure Visual Composer to connect to the backend BI-ABAP
BI database which is DB2, from the Visual Admin on the windows box.
Downloaded the driver for DB2 JDBC from IBM website
(ibm_data_server_driver_package_win64_ALL_LANG_v97.exe) Not sure if this is the correct driver, because we are unable to connect to the BI
Landscape information
BI- ABAP: NW 701 SP4 AIX 6100-3/DB2 v9.5.0.4,FIXPACK 4
BI-JAVA: NW 701 SP4 WIN2003 X64/SQL2005 SP3
When i run this url http://servername:port/TestJDBC_Web/test2 i i get the following error
Exception Details:
com.sap.ip.bi.sdk.exception.BIConnectionFailedException: Cannot open the connection
     at com.sap.ip.bi.sdk.dac.connector.jdbc.JdbcConnectionFactory.getConnectionEx(JdbcConnectionFactory.java:238)
     at com.sap.ip.bi.sdk.trialarea.connector.servlet.model.JDBCModel.getConnection(JDBCModel.java:796)
     at com.sap.ip.bi.sdk.trialarea.connector.servlet.model.JDBCModel.getTables(JDBCModel.java:132)
     at com.sap.ip.bi.sdk.trialarea.connector.servlet.controller.Control2.doPost(Control2.java:25)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.ip.bi.sdk.exception.BIResourceException: Cannot open the connection
     at com.sap.ip.bi.sdk.dac.connector.jdbc.JdbcManagedConnection.(JdbcManagedConnection.java:123)
     at com.sap.ip.bi.sdk.dac.connector.jdbc.JdbcManagedConnectionFactory.createManagedConnection(JdbcManagedConnectionFactory.java:112)
     at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:338)
     at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:262)
     at com.sap.ip.bi.sdk.dac.connector.jdbc.JdbcConnectionFactory.getConnectionEx(JdbcConnectionFactory.java:233)
     ... 19 more
Caused by: com.sap.ip.bi.sdk.exception.BIResourceException: Cannot connect to JDBC data source
     at com.sap.ip.bi.sdk.dac.connector.jdbc.impl.Connection.connectDB(Connection.java:336)
     at com.sap.ip.bi.sdk.dac.connector.jdbc.impl.Connection.connect(Connection.java:99)
     at com.sap.ip.bi.sdk.dac.connector.jdbc.JdbcManagedConnection.(JdbcManagedConnection.java:118)
     ... 23 more
Caused by: java.sql.SQLException: No suitable driver
     at java.sql.DriverManager.getConnection(DriverManager.java:532)
     at java.sql.DriverManager.getConnection(DriverManager.java:140)
     at com.sap.ip.bi.sdk.dac.connector.jdbc.impl.Connection.connectDB(Connection.java:320)
     ... 25 more

Hi,
you can check the configuration:
http://help.sap.com/saphelp_scm50/helpdata/en/43/e35b3315bb2d57e10000000a422035/content.htm
Regards, Mayur

Cannot impersonate user for data source 'SMSDB'. --- Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Log on failed. ---

Similar Messages

Maybe you are looking for