Cannot implement/deimplement notes; upgrade running

Hello Experts,
We have applied the support packs in SOLMAN system using SUM tool and it was completed successfully without any issue.
Due to some issue we have restore the backup which was taken after the completion of downtime phase i.e. Phase 5.6(Execution).
Now the system is up and running and we are applying the SAP note using SNOTE and it is giving this message "Cannot implement/deimplement notes; upgrade running".
Can you please suggest which steps I need to execute again which was performed by SUM tool itself to make the system productive.
Regards,
Shubham

Hello Deepak,
In my case solman upgrade was completed successfully after executing all the phases of SUM.
Now the scenario is
1. After two days I face some issue due to which I have to restored the backup taken during execution phase of SUM (i.e. Phase 5.6) just before post processing phase where SUM prompt to take the database backup and enable the archive logs.
2. This DB backup is restored successfully and now Solman system is up and running.
3. Now if I try to apply SAP note it using snote it gives message "Cannot implement/deimplement notes; upgrade running".
But in the SUM guide SAP has not provided the steps which we need to execute if we restore that backup. I am trying to find out which steps I need to execute manually which were performed by SUM tool itself.
Regards,
Shubham

Similar Messages

Implement SAP note while upgrade is running

Hello Folks,
In our upgrade, during our downtime phase, we are running into an issue that requires an SAP Note implementation. We started our main instance, but when we go into SNOTE transaction, it is not allowing us to implement any notes. It gives the message "cannot implement/deimplement SAP notes; upgrade is running"
We already tried commands tp unlocksys, tp unlock_eu, but nothing works. We are already past shadow instance switch, so unlocking shadow instance is no good.
Can anyone provide any inputs on how to overcome this issue?
Thanks!

Hi Fahad,
I think you have to implement the correction included in sap notes manually during upgrade.
You can refer to note 1369430. In this note, it is said that:
3. Now use a modification to change the source code for the function
    module ENH_MASS_ACTIVATION and the method
    CL_ENH_TOOL_HOOK_DEF->IF_ENH_OBJECT~AFTER_IMPORT as described in the
    attached correction instructions. You cannot currently use the Note
     Assistant SNOTE to do this. Activate this change.
So you see that it is not possible to use SNOTE during upgrade even after using unlocksys
and unlock_EU command.
Regards
Julia

Re-implement a note that has been reset?

Hello,
Can you re-implement a note that has been reset? I am trying to but am getting error message "not all required corrections were implemented".
I deimplemented the note instead of trying to upload the new version of the note. Now I am stuck without any code correction, and cannot implement the note.
Thanks for any help!

Hi Fabienne
Are you trying with the SNOTE transaction. if yes then try to apply the note manually
Best Regards
Naresh

HT5622 After restored factory setting, I cannot download apps if I do not upgrade the ios of my 4s. However, many people saying that upgrading to ios7 in 4s will make it run very slow. What can I do?

After restored factory setting, I cannot download apps if I do not upgrade the ios of my 4s. However, many people saying that upgrading to ios7 in 4s will make it run very slow. What can I do?

After restored factory setting, I cannot download apps if I do not upgrade the ios of my 4s. However, many people saying that upgrading to ios7 in 4s will make it run very slow. What can I do?

Error while upgrading OBIEE10g RPD to 11g Cannot release MBean - not locked

Hi,, I have successfully installed OBIEE 11g and now truing to upgrade 10g RPD to 11g RPD using Upgrade Assistant. The process gets failed with following error in the LOG file;
*[2013-02-19T00:54:53.367+05:30] [bi] [NOTIFICATION] [oracle.bi.security] Adding member 'REPORTING_USER' to role 'REPORTING_USER'*
[Comment] The above line is last line without any WARNING or ERROR, the WARNING and ERROR starts brom next line (below)
*[2013-02-19T00:56:55.375+05:30] [BIEE] [WARNING] [upgrade.BIEE] Cannot release MBean - not locked*
*[2013-02-19T00:56:55.376+05:30] [BIEE] [ERROR] [upgrade.BIEE] javax.management.OperationsException: WARNING: Element Type: DOMAIN[[*
Element Id: null
Operation Result: FAILED_TO_APPLY_CHANGES
Detail Message: Timeout; Waiting for all managed servers to push configuration changes; [120 secs]; AdminServer
Please help.
Edited by: 923934 on Feb 25, 2013 2:41 AM

while upgrading the RPD make sure that user weblogic server must be up and running including the all the BI Services.
first look into these servers and run the upgrade utility.
let me know is there any issues.
Regards,
Yogi.

I am using a Palm Pilot still for several purposes, and the desktop version can run om my Mac OS X 10.6.8, but I cannot find a version that runs on OS X Mavericks, which prevents me from upgrading as my PalmPilot is storage for vital info.

I am using a Palm Pilot still for several purposes, and the desktop version can run om my Mac OS X 10.6.8, but I cannot find a version thjat runs on OS X Mavericks, which prevents me from upgrading as my PalmPilot is storage for vital info. Any solution?

Thank for for your suggestions. Unfortunately they are of little help. I am running on Snow Leopard and the PalmDesktop works fine. However, I do not want to quit my PalmTungsten unit as it is my backup for all my important access information. If it cannot run on Mavericks and no other solution is at hand, I simply will not update my OS X, but work on my Snow Leopard as it is.
I do not know how on earth I can migrate the information from my Palm into another system, and then quit the PalmPilot. If you have any intelligent solutions to this I would appreciate an input. A manual copy and paste solution is not acceptable. I may however run it on Windows via Parallel Desktop, but it is a lousy solution, and demonstrates (again) the weakness of Apple's OS and lack of compatibility. I am not impressed by the OS X performance.
Thank your for your attention.

Unable to connect to companies in current server as algorithm is not update; run common upgrade security algorithm

Dear,
I've had problems with the installation of version 9.0 PL04 (base) when trying to enter the base DemoUS, this system message I get: Unable to connect to companies in current server as algorithm is not update; run common upgrade security algorithm.
Please someone has an idea how to fix (attached image of the message).

Try this:
1. Check if the SBO-Common database exist. If you cannot find SBO-Common database you must re-install SBO system on the server.
2. If the SBO-Common database exists, then SAP Business One application version is higher than the SBO-Common database version. Perform version upgrade.
Regards,
JC.

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

I cannot find my iPhoto upgrader in Finder...I was told to go to the Go menu and click on Utilities...this is not an offered option...and nothing comes up in the search box...

I cannot find my iPhoto upgrader in Finder...I was told to go to the Go menu and click on Utilities...this is not an offered option...and nothing comes up in the search box...I have upgraded to OS X Yosemite, downloaded the iPhoto app to go with it, and the iPhoto upgrader...just can't find the upgrader...

In the finder applications folder ==> Utilities -- double click the iphoto library upgrader and then launch iphoto 9.6.1
iPhoto '11 or later: About the Library Upgrader - Apple Support

How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion? I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8)

How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion? I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8) since November until now. Mail will no longer download on the MacBook Pro and keeps asking for my password.

Mail should still be usable with your machine - but you'll need to update the settings to conform to the requirements of your system. Check with your ISP (like ATT, etc.) for the settings that will work with your Mail. Once you've updated this, you should be able to email like before.
For example, my ISP required that I go to Mail Preferences/Accounts and make sure the details conform to your email settings.
I have no idea of what your ISP is or what the settings might be, but this is likely the source of the problem.

Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up

Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up or crash with the older version. Is this problem being looked into and or being corrected. I use Firefox with Google and my system is XP Pro 32 bit. THIS IS REALLY making me MAD. My email is [email protected] and would appreciate a response to this ASAP. I have tried a couple of items from your help section and nothing works.

'''Anonymous'''
Please post a separate question. Thank you. https://support.mozilla.com/tiki-ask_a_question.php?locale=en-US&forumId=1
'''chris'''
'''''Crashing'''''
See:
http://support.mozilla.com/en-US/kb/Firefox+crashes
http://kb.mozillazine.org/Firefox_crashes
http://support.mozilla.com/en-US/kb/Firefox+crashes+when+loading+certain+pages
http://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it
http://support.mozilla.com/en-US/kb/Firefox+will+not+start
http://kb.mozillazine.org/Browser_will_not_start_up
'''''Hanging'''''
See: http://support.mozilla.com/en-US/kb/Firefox+hangs
'''''Hanging at exit'''''
'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''''Safe Mode'''''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
'''chris'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.~~red:17~~; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)''': your ver. 10.0 r~~red:45~~; current ver. 10.1 r53 ('''important security update 2010-06-10'''; see: http://www.adobe.com/support/security/bulletins/apsb10-14.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-''In Windows,'' check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-''In Windows,'' double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
'''Update Shockwave for Director (aka Shockwave Player)''': your ver. ~~red:10.1 (very old)~~; current ver. 11.5.7.609 (important security update released 2010-05-11; see http://www.adobe.com/support/security/bulletins/apsb10-12.html)
NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
SAVE the installer to your hard drive (Desktop is a good place so you can find it). When the download is complete, exit Firefox (File > Exit), locate and double-click in the installer you just downloaded, let the install complete.
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox#_Installing_Shockwave Installing Shockwave]'''
'''You '''~~red:'''MAY'''~~''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates.
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

I have a Power Mac G5 Dual 2.3 running 10.5.8, I understand that I can not upgrade to Lion, so what will happen to my Mobile me, which I can not live with out?

I have a Power Mac G5 Dual 2.3 running 10.5.8, I understand that I can not upgrade to Lion, so what will happen to my Mobile me, which I can not live with out? Also will I be able to get Icloud to work?

Hi Mary, the other so called "Features" of iClound will not work for like Syncing, but eMail will.
MobileMe & dot Mac will still work last I heard.
iCloud Mail setup, even in 10.4/10.5…
Don't delete your old account yet. Just setup a new one in Mail>Preferences>Accounts, little plus icon. Choose IMAP as account type, not ,mac or MobileMe.
IMAP (Incoming Mail Server) information:
          ▪          Server name: imap.mail.me.com
          ▪          SSL Required: Yes
          ▪          Port: 993
          ▪          Username: [email protected] (use your @me.com address from your iCloud account)
          ▪          Password: Your iCloud password
SMTP (outgoing mail server) information:
          ▪          Server name: smtp.mail.me.com
          ▪          SSL Required: Yes
          ▪          Port: 587
          ▪          SMTP Authentication Required: Yes
          ▪          Username: [email protected] (use your @me.com address from your iCloud account)
          ▪          Password: Your iCloud password

Error message Plug-ins not upgraded, cannot open

A client sent me a CS3 InDesign that won't open. It says my plug-ins are not upgraded. It lists all the plug-ins and they
are features that already exist in InDesign such as preflight and collect. How can I get the file to open?

I cannot insert the screenshot .jpg's into my e-mail. So here are the messages:
Error message 1.)
CONDITIONALTEXT.RPLN
WORDREADY.RPLN
The "file.indd" uses one or more plug-ins which are not currently available on your system. Do you want to open anyway?
Error message 2.)
List of 21 plug-ins (many in this list are standard items in my CS3 InDesign such as preflight)
Cannot open "document.indd" please upgrade your plug-ins to their latest versions or upgrade to the latest version of Adobe InDesign.
InCopy is listed as one of the plug-ins. Does that tell you something? Let me know if you need additional information.
Thanks,
WZ
WZ DESIGN | 135 PROSPECT ST. | PROVIDENCE, RI 02906 | 401.323.4975
WWW.CREATIVESHAKE.COM/WZDESIGN

I want to sync my ipod with itunes but it says the ipod cannot be used because the required software is not installed. run the itunes installer to remove itunes, the reinstall itunes again. i have done as instructed few times but still persists.

i want to sync my ipod with itunes but it says the ipod cannot be used because the required software is not installed. run the itunes installer to remove itunes, the reinstall itunes again. i have done as instructed few times but still persists.

Success!
By completely removing all reference to apple or iTunes/iPod/ Safari etc from my computer, it has at last installed.

Snow Leopard 10.6.3 upgrade issues.. I run the full install and my computer restarts to complete the installation, but when it restarts the software has not upgraded. Any suggestions?

I've tried to upgrade to Snow Leopard 10.6.3. I run the full install and my computer restarts to complete the installation, but when it restarts the software has not upgraded. Any suggestions?

Are you booting from the retail disc to do the installation, or running it while booted from Macintosh HD?
It should work either way, but it doesn't always work when booted from Macintosh HD. The system files are supposed to be moved into place during the restart (while the HD is unmounted) making for a long restart time which sometimes causes people to think somethings wrong and abort it. Which is a bad move.
If you're booting from the retail disc it's less obvious what the problem may be; however if you've tried it from booted from the HD and it's failed, then tried booting from the disc, it will fail again because the system components are already on the HD in a disc image waiting to be moved into place.
Whichever way you were tryig, I'd try downloading OmnDiskSweeper (it's free) and using it to see if there's a large package (around 7-10 GB) lurking somewhere that may contain the installer files. If you do, you'll need to trash that before the installer will see a 'clean' system again.
It's also worth asking how much free space you have on your HD - if there's not enough for the installer to use for the temporary package or dmg, it'll fail.
Was there no warning dialogue after the unsuccessful install?
Message was edited by: noondaywitch ; link added

Cannot implement/deimplement notes; upgrade running

Similar Messages

Maybe you are looking for