Cannot import all photos onto PC

When I connect my phone to my laptop it is not showing all the photos on my phone to allow me to import them all.
I have approx. 2000 photos on my phone, but when I connect and browse my phone on my PC I can only see approximately 50 photos.
I can see the following iPhone>DCIM>Foldername xxxxxx and that is all?
Why can't I see more?
Please help - they have all my baby photos!

Did you follow the steps mentioned in this article to import the photos inside the camera roll? Photos that have not been taken with the phone or located inside the camera roll can't be imported.
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

Similar Messages

  • TS4253 iPhone 6 cannot import edited photos onto Macbook

    I have iOS 8 as well as the new Yosemite and latest iPhoto, as the Apple support recommends. However, I can still only import originals into iPhoto from my iPhone. It's maddening. What should I do?

    Hi MusicLiz,
    Welcome to the Apple Support Communities!
    I know that it can be frustrating when your edited pictures revert back to originals after importing them to your computer. This can happen if your photo-management application cannot read XMP format. The following article describes the situation and names several applications that support XMP format. 
    iOS: Edited photos show original photo after import or in other apps
    Cheers,
    Joe

  • Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash, if possible.
    Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) 2>&- | wc -l | pbcopy
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
    The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • I have imported all photos and videos from my iPhone 5S into Aperture ver.3.4.5 and now cannot find them. I thought I could open a panel showing all imports and merely list them chronologically, but I don't see how to do this.

    I have imported all photos and videos from my iPhone 5S into Aperture ver.3.4.5 and now cannot find them. I thought I could open a panel showing all imports and merely list them chronologically, but I don't see how to do this.  There are over 1800 photos and about 100 videos, any help to locate where they've gone would be appreciated.

    Try to search with a Smart Album for photos and videos taken with an iPhone:
         File > New > Smart Album:
    Add an EXIF rule fro the "Add Rule" drop down menu: EXIF
    and set it to "Camera Model includes iPhone".
    Set the scope of the search to "Library"
    If there are any iPhone images or videos in your library at all, this search should find them.  Then ctrl-click any of the items and select "Show in Project" from the contextual menu.
    Generally, Aperture should be showing your last import in the "Last Import" smart album in the "recent" section". And the "projects" view can be sorted by date, so you should see your recent imports.
    You may want to check all search fields, if searches are active.

  • I am unable to download all photos to computer.  At a certain photo I get the following message:  IPhoto cannot import your photos because there was a problem downloading an image.  How can I go around this  image

    I am unable to import all photos to IPhoto on computer.  At a certain photo the following message appears:  IPhoto cannot import your photos
    because there was a problem downloading an image.  How can I circumvent this particular image and import all other photos?

    I'm having the same issue.  i have imported everything but the offending photo from my iPhone.  problem is, with over 5000 pics, i have no idea how to find THAT ONE pic that won't import (bc I just get a greyed out pic image - with no data in iPhoto)
    any idea how to get "date taken" info of THAT ONE pic out of iPhoto (or any metadata) so I don't have to search 3 years of pictures?
    and I do apologize for hijacking.

  • IPhoto says it cannot import my photos because there was a problem downloading an image, how do I fix this?

    Hello! So I have a Sandisk class 10 memory card and whenever I try to import photos onto iPhoto from the memory card it says "IPhoto cannot import your photos because there was a problem downloading an image". I have a Macbook Air and IPhoto 9.5.1.. I've tried a lot of what other people say on other questions like this and it still won't work! I've tried using image capture, creating a new library, and creating a new user to see if it worked there. I have enough space for the photos, so I'm not sure what the problem is. Please help, Thanks! 

    I had that happen a couple of times because even though the camera displayed the  picture there was a problem with the way it was saved to the chip - and that caused problems with all pictures after it.
    My version of IPhoto (ILIFE09) does show where the error occurs on direct import from the camera -- on the camera deleting the first picture where the error occurred allowed import of the others.   Once it was the first picture, once in the middle.
    Problem happened when I took a second picture before the first one was 100% finished saving.

  • HT1386 When trying to down load photos I get this message: iPhoto cannot import your photos because there was a problem downloading an image. What should I do to restore syncing my phone?

    I can't sync my iPhone 4 photos with my deck top. It all just stoped working. When trying to sync photos I get the following message:
    iPhoto cannot import your photos because there was a problem downloading an image.
    What do I need to do to get the syncing process back to normal?

    Hi there obywon!
    I have an article for you that can help you find some other ways to import those pictures from your iPhone onto your computer. You should try a couple of different programs that would import the photos into your computer. This first article can tell you the different programs that you will want to try when attempting to import photos:
    iOS: Importing personal photos and videos from iOS devices to your computer
    http://support.apple.com/kb/ht4083
    If you are still having issues with importing those photos, you will want to see this article for next steps on resolving this issue:
    iOS: Unable to import photos to computer
    http://support.apple.com/kb/ts3195
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • I cannot load more photos onto my iPad as I'm being told there is not enough storage. I have bought an extra 20 GB storage plan from iCloud so how can I now load more photos onto my iPad. Surely there is enough space!  Do I need to delete previous photos?

    I cannot load more photos onto my iPad even though I have bought an extra 20 GB storage plan from iCloud. As I am on holidays and taking loads of photos I thought  a good plan was to load them onto my iPad and then regularly back them up to iCloud. If I do this, do I then delete those photos from the iPad that I have backed up to iCloud and if I delete them from the iPad are they gone forever or can I somehow get them back from iCloud? I'm only new at all of this so I hope someone can assist me. I'd hate to lose all of my photos(I know they are still on my memory stick) but I would like to have them safe and secure and able to retrieved whenever I wish.

    Chris CA wrote:
    You cannot backup photos to iCloud.
    You can enable Photo Stream (in Settings > iCloud) but only for 30 days and only a max of 1000 photos.
    Then what does this mean? It was copied from the kb article that I posted above.
    Reducing the size of your Camera Roll backup
    If you take lots of photos and videos with your iOS device, you may notice your Camera Roll takes up most of your iCloud Storage backup. To check the size of the Camera Roll backup on your device:
    On your Home Screen, tap Settings.
    Tap iCloud.
    Tap Storage & Backup.
    Tap Manage Storage.
    In the Backups section, tap your device.
    In the Backup Options section, the backup size is displayed under Camera Roll.
    To reduce the size of your Camera Roll backup, save your photos and videos locally to your computer with iTunes, and then manually back up your iOS device. If you want to keep your photos and videos on your iOS device, you can turn off Camera Roll in Backup (see the "Deleting backups and turning off Backup for your Device" section above) orpurchase additional storage.

  • Cannot import all JPGs

    Hi
    I've been using Lightroom 3 for about 6 months and had no problems at all. Recently I took a bunch of photos in JPG format with my Sony Alpha A350, when I went to import them half of the images were darkened and I can't select them for import. I've always used the same camera and not used any advanced features as I'm still a novice.
    Any suggestions?
    Thanks in advance!
    Paul

    Thanks Hal
    I'm not sure what you mean by reformatting. Could you clarify please?
    On the card was 85 photos (30 of those are darkened). I selected new photos as you suggested and imported. But still there are only 55 photos in the library and not the full 85
    Any other suggestions?
    Cheers,
    Paul
    Date: Wed, 8 Feb 2012 04:58:55 -0700
    From: [email protected]
    To: [email protected]
    Subject: Cannot import all JPGs
        Re: Cannot import all JPGs
        created by Hal P Anderson in Photoshop Lightroom - View the full discussion
    Paul, Darkened images in the Import grid mean that Lightroom figures those photos are already in the library. Did you shoot more images on the card without reformatting it? What happens if you choose "New Photos"?  http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-4193178-155633/450-102/Lightro om_2012-02-08_07-56-13.jpg Hal
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4193178#4193178
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4193178#4193178. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • HT2498 iPhoto cannot import your photos because there was a problem downloading an image. This keeps happening I need hlep

    iPhoto cannot import your photos because there was a problem downloading an image. This keeps popping up and its really titting me off. I use a Canon Rebel and I shot a video with it and I am trying to put it up on a website but I cant get it to import onto anytihng please FIX THIS!!!!

    Try using Image capture (in your applications folder) to move the video to the desktop and then import to iPhoto from there
    LN

  • Why am i getting this warning? iPhoto cannot import your photos because there is not enough free space on the volume containing your iPhoto library.

    I can no longer import photos from my PC because I get this message:  iPhoto cannot import your photos because there is not enough free space on the volume containing your iPhoto library.  How can I fix this problem?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • HT3680 I get the message 'your startup disc us full' at random time point I'm trying to import photos to iPhoto and get'iPhoto cannot import your photos because there is not enough free space on the volume containing your iPhoto library'.

    I get the message 'your startup disc us full' at random time points. I'm trying to import photos to iPhoto and get'iPhoto cannot import your photos because there is not enough free space on the volume containing your iPhoto library'. This is a new Macbook Pro and all my files were transferred from my old Macbook.

    What size internal drive do you have and how much of it is used?

  • I have IPhoto version 9.5.1. I cannot export pictures, the following message appears: "iPhoto cannot import your photos because there is not enough free space on the volume containing your iPhoto library." What am I suppose to do? I have a Mac mini.

    I have IPhoto version 9.5.1. I cannot export pictures since the following message appears: "iPhoto cannot import your photos because there is not enough free space on the volume containing your iPhoto library." What am I suppose to do? I have a Mac mini which properly used can perform any reasonable task, the problem is I do not know what to do.
    Any help will be appreciated.

    Hmm... that was labelled:
    As a Test:
    In bold and all
    Try repair the main Library:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • IPad doesn't import all photos

    My ipad won't import all photos to iphoto. The photos from photostream wonÄt get imported at all. Any ideas what the problem could be?

    How did the photos get onto the iPad originally ? Your Mac won't see photos that were originally synced from a computer, if you want to copy those photos back to a computer then you will need a third-party app on your iPad such as Simple Transfer which can copy them off via your wifi-network.
    If they are not synced photos then have you tried Image Capture or Aperture to see if they see them ?

  • I have lightroom 5.7. Now I have apple TV to connect my Mac to the TV scree. I wish to do a slide show on the TV. However, on the Mac, using ITunes to share photos with the TV, I cannot locate all photo files. What is the best way to save the slide show a

    I have lightroom 5.7. Now I have apple TV to connect my Mac to the TV scree. I wish to do a slide show on the TV. However, on the Mac, using ITunes to share photos with the TV, I cannot locate all photo files. What is the best way to save the slide show and put it where the Mac sharing can find it? So far, I made on one folder in Lightroom, put some photos there and I found them easily. Can this be done with a slide show? Please help quickly! Also worried that the photos I put on the new folder are hard to find afterwards, when the show is done. Where do they go when I delete from from the new folder?I am not alone

    Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

Maybe you are looking for

  • Calling a stored procedure with argument as column name

    hi i am calling a stored procedure mapping_audit_errors_inserts whose definition is as follows PROCEDURE mapping_audit_errors_inserts ( in_ma_seq_id IN ETL_MAPPING_AUDIT_ERRORS.ma_seq_id%TYPE, in_etl_stage IN ETL_MAPPING_AUDIT_ERRORS.etl_stage%TYPE,

  • (10.1.2.0)Duplicate index value for ViewLinkAccessor in EO

    Hi, I did some major re-work on the model/data tier EO/VO/ViewLinks. The EO's used to be synchronised with the DB with PK/FK assoc etc. We have been struggling with accessor naming on FK associations in the BC4J for some time now and decided to remov

  • How do I get rid of an overlay on the Galaxy s5 phone

    All of a sudden an overlay appeared on my phone and I cannot figure out how to get rid of it. Any help would be appreciated.                   Thanks,                      Mike Lane

  • Trigger an ABAP program through a Process Chain

    Hi, I have an ABAP program as part of my Process Chain that updates the BW Hierarchy OREGH.  However I can't get the program to execute through the chain, even the though chains goes all green. without any REDS anywhere along the chain.  When I check

  • Any Idoc for "storage location for a material" ?

    Hi Everyone, Does anybody know if there is an IDoc type to insert storage location for a material (Table MARD). BDC is also an option but IDoc should be a better choice. Thanks & Regards, Ankur