Cannot import photos to iPad -- "missing file"

When I sync my iPad, everything seems to be going well, but at the end I get the message "iPad cannot be synced. The required file cannot be found." Everything syncs fine except the photos. My photos are in iPhoto, and are stored in the default file on the computer. All the categories show up on the iPad, but the photos themselves are blank. The iPad gives the message, "iTunes sync needed. High Resolution images synced via iTunes are missing." It then tells me to connect to the computer and sync with iTunes. There is no problem syncing them to my iPhone, so the file seems to be missing from the iPad, not iTunes.
I would reinstall Photos on the iPad, but I don't know how. Any thoughts? Thanks.

I'm having intermittent problems with 3rd Gen iPad, Canon EOS 60D and iOS 6. Never had a single upload problem with iOS5, but version 6 is very hit and miss on uploading. It's very frustrating to spend a few minutes ticking the photos you want to upload, only to have them fail with red exclamation marks. The only solution appears to be disconnect and power off everthing (including the iPad), turn iPad on, wait until booted, then reconnect cable, then power up the camera. Import usually works after this, but it's a bit of a pain. No sign of a fix from iOS 6.01.

Similar Messages

  • Cannot import photos to iPad

    Using iPad camera connection kit. I select a photo, choose import selected then get a ! On the selected photo. Photo is not imported.

    I'm having intermittent problems with 3rd Gen iPad, Canon EOS 60D and iOS 6. Never had a single upload problem with iOS5, but version 6 is very hit and miss on uploading. It's very frustrating to spend a few minutes ticking the photos you want to upload, only to have them fail with red exclamation marks. The only solution appears to be disconnect and power off everthing (including the iPad), turn iPad on, wait until booted, then reconnect cable, then power up the camera. Import usually works after this, but it's a bit of a pain. No sign of a fix from iOS 6.01.

  • I've just upgraded to Iphoto v9.4.1 and cannot import photos from my hard drive

    I've just upgraded to Iphoto v9.4.1 and cannot import photos from my hard drive. no matter what method I use, either click and drag or through the File menu. All I get is a message 'Preparing to import' - file size is less than 300 kb

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • I can't import photos from a card, file or anything.  I get "could not copy a file to the requested location"..  This has never happened before.

    I can't import photos from a card, file or anything.  I get "could not copy a file to the requested location".  I have never had this happen before.  I use a MacBook Pro

    I also have the exact same issue.  New IMac, installed LR, imported approximately 900 photos no problem, across the network from a Windows PC.   The import stopped when the network connection was lost.   Now I cannot import for the same reason "could not copy a file to the requested location".  I have plenty of disk space and i have permission to the needed folders.   I cannot even import from a folder already on the IMac.   

  • I cannot import photos from my camera card into light room 5 or photoshop

    I cannot import photos from my camera card into light room 5 or photoshop

    There is no "into". LR and PS just reference your photos on the hard drive.
    When you import your photos "into" the LR catalog, LR can copy the images off your memory cards to the hard drive if you have not already copied them, but the photos are referenced by the LR catalog by the path and filename for the files.
    If you are having problems getting the images off the cards, what steps are you using and what error messages are you getting?

  • I cannot import photos from iPhone to iPhoto 11

    I cannot import photos from iPhone to iPhoto 11, I have delete all the pictures I captute on the iPhone yet iPhoto show me 10 picture squares that are grayed out. I tried to import these and I'm shown a message that says undeadable files 10 : The following files could not be imported. the files are in an unrecognized format.
    IMG_0192.JPG
    IMG_0193.JPG
    IMG_0194.JPG
    IMG_0195.JPG
    IMG_0196.JPG
    IMG_0197.JPG
    IMG_0198.JPG
    IMG_0199.JPG
    IMG_0200.JPG
    IMG_0201.JPG
    IMG_0202.JPG
    IMG_0203.JPG
    I have detele the iPhoto cache from user/library/caches/com.apple.iPhoto but it made no difference.
    Any advice is welcome.

    Yes, I did solved the problem. It was not with iPhoto but with the iTunes. Once I delete my phone profile all worked. I did not write the steps down but if you do it please post it here.
    Cheers

  • I cannot import photos from my Cannon PowerShot A80

    I cannot import photos frpm my Cannon PowerShot A80. I have imported many photos from this camera in the past. I get an unrecognized fromat error message.

    Welcome to Apple Support Communities.
    Sounds like the camera memory card (CompactFlash) contains one or more corrupted image files.
    If the images are not important, you may be able to correct the problem by reformatting the memory card with the camera setup menu. Of course that will destroy any images currently on the card.
    If you choose to do that, quickly do a few test images and try importing them to verify that the card was successfully reformatted and that the test images can correctly be imported.
    There are utility programs designed to recover images from flash memory.
    One of my flash cards came with a free one (for Windows) that I use.
    Of course there are also paid programs and data recovery services.
    A quick search revealed this link. I downloaded, installed it, and recovered a deleted file, but I have not used the free version extensively, so I cannot vouch for it, or the paid upgrade.
    http://www.easeus.com/mac/mac-photo-recovery-free/
    Message was edited by: kostby

  • I cannot import photos from any device to my iphoto program- the error message statesphotos cannot import because there was a problem downloading an image.  I cannot identify the image that is the problem.

    I cannot import photos to my iphoto from any of my devices.  The error message reads - iphoto cannot import your photos because there was a problem downloading an image.  I have deleted the last images- this did not help.  any suggestions?

    Details please
    What version of iPhoto? Of the OS? what devices are you haveing problems with? can you download teh photos to a desktop folder using image capture (in your applications folder) and import from there - or open with priview from there?
    LN

  • Can i import photos from ipad to windows based computer.

    my ipad is losing charge very quickly and I have been told by apple genius bar support that the battery is working fine. They say I need to back up the ipad and then reload from scratch. But they say that if I simply use the back up I am likely to have the same problem, so what I really need to do is make sure that my photos are safe and then can choose what to reload. But I have a windows pc not a mac and I cant see how to transfer the photos on the ipad to the computer. Apple say they know nothing about windows computers. Any easy, non technical ideas please?

    First of all, you can use iTunes or iCloud to backup your data on iPad. If you have no idea on how to make a backup, you can go to :http://support.apple.com/en-us/HT203977
    Then, to import photos from iPad to computer,  there are two ways:
    Way 1: If you have enable iCloud, you can see and copy the photos you took in the last 30 days on Windows iCloud panel which you have installed on your computer. However, there is an advantage that you can not import all photos.
    Way 2: You can use iTunes to copy the photos on iPad to your computer. Install the latest iTunes and connect iPad to the computer. Then, you'll see your device on the "Computer (disk)" list , click it, you can see all your pictures on the iPad and import or copy it to the computer.

  • I cannot import photos from my camera card into light room 5v or photoshop

    i cannot import photos from my camera card into light room 5 or photoshop

    Launch Lightroom and from the menu go to:
    Lightroom >> Preferences >> general (tab)
    Ensure there is a checkmark in the box “show import dialog when a memory card is detected”
    Then quit Lightroom and insert the card again. Does LR launch ready for import?
    If not, check that your card is mounted. You should see an icon on the desktop.
    Launch Lightroom and click the import button (bottom left)
    Expand the tree in the left-hand column of the import dialog e.g. from Mac HD >> Users….down to desktop.
    Highlight your card.
    Choose “Copy” at the top and either a named folder on the right or automatic dated folders.
    Then start the import.

  • I am trying to import aperture library from macbook to new imac the import window sees the external harddrive but does nt see library.  I can open library as a refernce library but cannot import onto hardrive as managable files  Tried to do as a backeup t

    I am trying to import aperture library from macbook to new imac the import window sees the external harddrive but does nt see library.  I can open library as a refernce library but cannot import onto hardrive as managable files 

    I may be misreading what you are trying to do but you don't import libraries via the import window. You use File->Import->Library..
    If this doesn't resolve your problem post back with more detail of what you are doing and what is happening.
    regards

  • Suddenly I cannot get photos from iPad onto my Mac.

    From the beginning, I simply connected the iPad2 to my Mac with the USB, and all photos were uploaded onto my Mac. I've followed all the directions to get updates for both Mac and iPad2. Now none of my new photos upload onto the Mac. Can you help?

    I'm not sure how you were importing the photos on your Mac but the two ways that I know of are with iPhoto and Image Capture.
    Open iPhoto and go to Preferences>General>Connecting Camera Opens - and you can select iPhoto or Image Capture.
    Connect your iPad to your Mac and Open Image Capture. Click on devices and then at the bottom of the left side you can select - Connecting this iPad Opens - and choose the app of your choice from there. These are copied and pasted from Help in the two applications.
    When you connect the iPad now, one of the chosen applications will open and let you import the images.
    To import photos from iPad:
    Connect your iPad to your computer using the Dock Connector to USB cable that came with your iPad.If iPhoto wasn’t already open, it opens for you (unless you changed this preference in iPhoto or your iPad is locked).After your iPad is connected and turned on, iPhoto opens in import view and your iPad appears in the Source list.
    By default, iPhoto divides photos into separate Events during the import process.You can optionally enter a description in the Event Name field.If you don’t want iPhoto to automatically create events, deselect the Split Events checkbox at the bottom of the window.If you want to change the time frame used to sort your photos into Events, you can change it in iPhoto preferences.
    If you don’t want to see photos that you’ve already imported into iPhoto, select the Hide Photos Already Imported checkbox at the bottom of the window.
    Do one of the following:
    To import all the photos shown in the iPhoto window, click Import All.
    To import a selection of photos, press the Command key while clicking photo thumbnails, or drag to select a group of photos, and then click Import Selected.
    To cancel photo transfer at any time during your import, click Stop Import. Then, in the dialog that appears, choose to continue importing the photos, keep the photos that have been imported and stop importing the remaining photos, or delete the photos that have been imported.
    After the import process is finished, drag the device icon to the iPhoto Trash, and then disconnect your iPad from your computer by unplugging the Dock Connector to USB cable.Important:  Before you disconnect your iPad, wait until all photos have been imported into iPhoto (or until you click Stop Import).
    This is from Image Capture. I'm assuming you used Image Capture.
    Transferring items automatically
    You can automatically transfer items from your camera to your computer whenever you connect the camera to your computer.
    To transfer items whenever you connect your camera:
    Connect your camera to your computer, and turn the camera on.
    Select the camera in the Devices list at the left of the Image Capture window.
    From the “Connecting this [device] opens” pop-up menu, choose AutoImporter.If you don’t see that pop-up menu, click the “Show device settings” button in the lower-left corner.
    The next time you connect your camera, Image Capture transfers images from the camera to the AutoImporter folder in your Pictures folder (in your home folder).

  • Cannot import photos or video into fcp x

    I have the newest version of FCP X and cannot import photos from iphoto or video...anyone, anyone?

    By clicking on the Photo Browser I assume that you mean the highlighted button in the screeen shot below:
    As you can see, on my system a view of the iPhoto collection does appear. If/when you find the photo(s) you want, drag them into the the event.
    So why doesn't this happen for you? Don't know. Where is your iPhoto library? Some location that Final Cut isn't expecting? Maybe searching for other posts re iPhoto in this community?
    dick glendon

  • Is there a way to recover missing imported photos to IPad 3??

    I imported 1500 photos to my I Pad today, now they are gone, They were saved in my imported folder and now they are gone. Is there any way to recover these missing photos? IPad 3

    You can restore from your iTunes or iCloud Backup if you have one.

  • Cannot import photos.. "can't create directory where file exists"

    Hi,
    I am unable to import photos into Lightroom... every time I try to a message pops up that reads
    I have no idea what this means or how to solve this issue. Lightroom is housed on my external hard drive... Recently, my old external HD conked out and I had to ship it off to the tech wizards who successfully removed and placed the data on a new HD. The problem importing started to occur after I began using the new external HD.
    Please help! Thanks in advance

    This could be a permissions issue. Check to see that you have write permissions for that destination folder. Don't just check your general permissions, check for that specific folder.

Maybe you are looking for

  • Ref cursor and dynamic sql

    Hi.. I'm using a ref cursor query to fetch data for a report and works just fine. However i need to use dynamic sql in the query because the columns used in the where condition and for some calculations may change dynamically according to user input

  • Confusion with PI 7.1 with integration scenario

    Hi, expert, I read a lot of documents before I have physically logged on to PI 7.1, I thought I had a very good idea about the new version. However when I am physically in PI 7.1, I found I get a little confused. I know ES is a big thing in 7.1, but

  • Problem in Visual Composer Installation

    Hi, I am trying to install the VC Server on my system. I have installed the required components like 1.     MS SQL Server 2000 DE 2.     IIS 3.     MS Internet Explorer 6.0 SP1 or higher 4.     Microsoft XML Parser 4.0 5.     Adobe SVG Viewer 3.0 Now

  • Regarding Posting Date

    HI Gurus I have a biling document which is configured in copy control as billing document date is the posting date my client is regularly changing the billing late to past date and they are doing the posting how to stop that as billing date should no

  • What is the best way to install client sccm 2012for all computer in my company

    in my company(25000 users) we have alot of branch(100-150 small Branch (every branch 50-100 users)) & 20 branch (100-100 users) . now only 11000 client in sccm2012 What is the best way to install client for all computer Note that sccm 2012(1 primary