Cannot import sequences from Adobe Premier Pro CC

The import of a PP CC project does not work. I cannot import sequences from Premiere Pro CC : the dynamic link start but nothing occurs.
I hope that I shall have not to rebuilt my project with Premiere Pro CS 6.
Thanks in advance for your assistance.

Hi,
Many thanks for your very quick reply.
My english is not very good, but if I understood, I must :
- import sequences within AME CS6,
- encode or convert the sequences inside AME,
- import the result inside AE,
- transcode within AE then finish the disc or the job.
Am I right ?
Le 29/11/2013 20:01, John T Smith a écrit :
>
Re: Cannot import sequences from Adobe Premier Pro CC
created by John T Smith <http://forums.adobe.com/people/JohnTSmith>
in /Encore/ - View the full discussion
<http://forums.adobe.com/message/5885675#5885675

Similar Messages

Cannot import .fcpxml from Final Cut Pro X to Premier Pro 6 ...'file format not supported'?

I've exported a project from FCPX into a .fcpxml. Upon trying to import it in Premier Pro 6, an error appears 'file format not supported'. I have searched for possible solutions, but everything I've found is related to FCP 7. Any assistance is greatly appreciated.

jessikeen wrote:
Hi Kevin!
Thanks for your response.
The codec is actually MPEG-2 -- so it's not a ProRes codec.
Other information:
HDV1080i60; 29.97 fps; 48Hz, 1440x1080 resolution
Any ideas for us?
Thanks for responding so quickly ~
Jessica
Hi Jessica,
That is a stickier case.
You can purchase the Calibrated {Q} plug-in to fill that gap. It might be wise to contact them and see if you can get an educational or volume discount.
The no-cost solution is a bit more labor intensive: transcode the footage to a friendlier codec prior via the FCP Media Manager prior to the students leaving the program.

Cannot import mpg files into Premier Pro CS3

I've read the wiki and looked through the FAQs and did not find this issue, so here goes.
The file began life as an mp4 from a GoPro HD camera. It plays correctly in Apple's software, but will not import into Premier. Found the KB on
Error message "Unsupported format or damaged file" when you import MP4 clips into Premiere Pro CS3 and changed the extension to MPG. This got me audio, but no video. The MPG plays correctly (audio and video) in Windows Media Player as well as in Bridge CS4.
Windows Vista 64-bit, 8 Gig RAM, Intel Q9300 Quad Core Processor, GeForce 9600 GT video card w/1Gig DDR3 RAM.
Any ideas?
John

PrPro is pretty well centered on pro formats. Many find that other NLE's, designed for consumer cameras and formats, work better and some natively. It's a tough call. I love the interface and workflow of PrPro, and use it 99% of the time. However, with heavily-compressed, delivery-only formats/CODEC's, some other NLE's work better - to start. I use those as converters, or do batch conversions with DigitalMedia converter, but it's shareware, and not freeware.
Some users want PrPro to embrace every possible CODEC and variation on each, with hourly updates, as mfgrs make changes, and others want it to only perform 100% with pro-formats and leave the consumer stuff totally alone - there is PrElements for that. Me? I just roll with the punches, and convert from X to Y, and edit in my chosen NLE. Kinda' the "Jimmy Buffett" of video editing.
Good luck,
Hunt

I cannot print a PDF from Adobe Acrobat Pro or Adobe Reader with Mavericks!

I cannot print a PDF from Adobe Acrobat Pro or Adobe Reader. I tried on both MacBook Pros we have here, both now with Mavericks. Error message says "Opening printer connection failed. Unable to open printer connection . . . " This is after it says sending data, printing, shows the percentages etc., but then at the end I get the error message above. I can print a PDF (same one) from Preview, but not from Acrobat! What's going on? Never had this issue before Mavericks . . . Please help.

This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

I cannot import .mov files to Premiere Pro or Adobe Media Encoder.

I cannot import .mov files to Premiere Pro or Adobe Media Encoder.
How do I around this problem?

We need to know a lot more if we're going to help you.
What happens when you try? Do you get an error message? If so, exactly what does it say?
What version of Premiere Pro? Have you installed the recent updates? What operating system?
Does this happen for all .mov files or just some? Has this ever worked before? What version of QuickTime do you have installed?
Here's a page written for After Effects, but the information is relevant to Premiere Pro and AME, too:
http://blogs.adobe.com/toddkopriva/2011/02/troubleshooting-quicktime-errors-with-after-eff ects.html

Blending mode in Adobe Premier Pro CS4 not working???

in Adobe Premier Pro CS4, the "multiply" blending feature is not working properly. When there's no video underneath the "blending" layer, it SHOULD not show anything, but instead the clip instead just shows up.

Well, the problem is that you're assuming that the "nothing" in the gaps in your PPro sequence is "something," when really, it actually IS "nothing"...
OK, existentialism aside, when you see black in the Program Monitor that results from a gap between two clips, from a digital standpoint, there really is nothing there. Empty spaces in a PPro sequence are actually a fully transparent layer, created by an alpha channel that encompasses the entire frame. Since the Multiply mode is expecting RGB values to operate on, when it doesn't encounter any (due to the alpha channel) the effect is just ignored--that's why you see the clip with the Multiply mode when it crosses those gaps.
You can correct this by filling your gaps with "real" black, either from an imported graphic or from the black video generator in PPro. Simply edit a bit of it into the gap so that there are no holes, and your multiplied clips will disappear.
And for that matter, it's never a good idea to leave empty holes in a Premiere sequence; it's often the cause of rendering and exporting headaches.

Adobe premier pro cc - timeline doesn't work.

I've just downloaded Adobe premier pro cc from the creative cloud app, but the timeline doesnt work. i can open the program, import footage to the source window but it wont let me drag the clip onto the timeline? is this usual with the trail version?

Hi there,
It sounds like you don't have a sequence created yet. Try
Peter Garaway
Adobe
Premiere Pro

Error Message: Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down.

Hi. I'm having another serious problem with CS4 (the version that comes with CS5 when you don't have 64 bit capability. I just finished a project, had saved it, and then had switched over to Adobe Encoder to create a finished flash video (which worked perfectly). I shut down CS4, went home, tried to restart the main project to create a video from the same project (wanted to make an mpeg version as well) and got the following error message:
Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down. We will attempt to save your current project. Then the system shuts down.
Not only can I not open the project I was working on, I cannot open any of my prior projects without receiving the same error.
Does anyone have any idea what may be causing this issue and how to resolve it?
Thanks in advance for any suggestions.
By the way, is everyone else having the same amount of problems with this software? I've never had any software that has had so many problems from the beginning. My opinion of this software and Adobe in general has gone down substantially.

Not enough information for anyone to even make a guess
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link

Adobe Premier Pro CS6 editing system and mov files

We have just installed a new Adobe Premier Pro CS6 editing system with a HP 820Z (running windows 7) 18 core multi drive system. Our production company has used many mov. files from Ponds. We were a FCP 7.0 studio (still have the system) but the mov files won't import to our new CS6 System... Not trying to import from the mac...have them stored on another PC. We depend on this stock footage for production. Do I need to download a converter? I just had to produce two spots with a still background because I could not get any of our stock mov files to work...
Thanks much for any help!

PP does support direct import of Quicktime files that can be played back on the system.
What is the correct error message after import?
Can you playback the files with the Quicktime Player?
For some codecs like DNXHD you have to install the quicktime codec first...

Adobe Premier Pro CS4_MPEGS PENDING

QUESTION:
The MPEGS in my timeline are pending. They will not show up in my timeline or in the source monitor. They have finished indexing! All my.mov files and graphics are working as usual. I have not moved them or changed their names since I imported them into the bin from my external drive.
The source monitor was jumbled a couple of times (not normal) tried restarting, etc. and still the same problem. Do I need to reinstall Adobe Premier Pro CS4? If so HOW do I de-install it first and how do I know which DVD in the master collection it is on?
Finding technical help from adobe is impossible. What happened to my MPEGS?
Please help.
Jill

Hi - I've JUST had the same problem - that's why I'm here - BUT ..
I found an incompatability between 25 fps of the timline and the 29 fps of the video footage.
I was experimenting with moving the project around between hard drives. I don't know how it changed or even what changed, though I'm sure something did. So I re-captured my footage making sure it was at 25fps and used the "replace file" on the FIle menu and it (almost) replaced all of the occurances of the bits of the original file with my new one and it almost all works.
I hope this helps.

I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks. I am unable to find where and how to do this without losing the project I have been working on. Please help?

I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks. I am unable to find where and how to do this without losing the project I have been working on. Please help?

Vere Clarke
Premiere Elements 9.0/9.0.1 and Premiere Elements 13 are standalone products.
So, you can have both on the same computer, but only open one for your work.
The classical recommendation is to finish a project in the version in which it was created since there
is no guarantee that a project from an earlier version will open in the later version. Probably will, but
no guarantees. And, when you do explore this, do it from a copy of the earlier version project. Once you
take the earlier version project into a later version one, you cannot go back to edit the later version edited
project in the earlier version program.
If you have both versions (9 and 13) on the same computer and you have not moved, deleted, renamed any of the version 9's files/folders,
right click the saved closed Premiere Elements 9.0/9.0.1 project file, select Open With, and then Adobe Premiere Elements 13.
(Your 9.0/9.0.1 saved closed project file should be found in Libraries/Documents/Adobe/Premiere Elements/9.0.)
Please review and consider. If any questions or need clarification, please do not hesitate to let me know.
Thank you.
ATR

Poor quality of AVI files playback in Adobe Premier Pro CS6

I tried to play back AVI files loaded from Canon GL2 camera by Premier Pro 2.0. In Adobe Premier Pro CS6 playback I got jitters and poor quality - what is the problem?

1st - More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
2nd - Exactly what is inside the AVI file?
Codec & Format information, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Adobe Premier Pro CC doesn't start

Today my Adobe Premier Pro CC stopped working. It won't work anymore after i opened an excersizing data sequence, or however its called in english. I need some help here since the sxstrace.exe didnt help at all.

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840

I go through the process of burning a DVD from a Premier Pro Project and at the end of the process I get an encoding error and the dvd does not start burning. How do I fix this?

I go through the process of burning a DVD from a Premier Pro Project and at the end of the process I get an encoding error and the dvd does not start burning. How do I fix this?

adam@honestmusky wrote:
Yes I am using encore. I used to have no problem doing this, but I had to get a new computer and now something isn't working right.
How about some DETAILS?
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Also describe the EXACT steps you take to go from Premiere Pro to Encore

How to blur the face of the person in the video using Adobe Premier Pro CS5

Hi
I have a video captured from a flipcam. I have Adobe Premier Pro CS5 and I don't have any knowledge of Adobe Premier Pro CS5 . Please can some one post a tutorial as how to blur the face of the person in the video using Adobe Master Collection CS5
Any help will be grateful .
Thanks

You are not really in the right place. I don't think you can edit video with Photoshop CS5, but Premier Pro CS5 can definitely do it. Off the top of my head, copy the video track on the timeline, (hold down the Alt/Opt key and drag).
Then Effects > Video Effects > Stylize > Mosaic.
Adjust number of blocks in Effects controls.
Then add Video effects > Keying > Four point matte
Adjust position of matte in effects controls.
If you want the matte to track with the video, move to start point on time line and adjust position. Move to end point and edit position. Matte will now move from one point to the other.
If you want more and better help, go to the Prem Pro forum.

Cannot import sequences from Adobe Premier Pro CC

Similar Messages

Maybe you are looking for