Cannot import swf/air file from flash catalyst

Cannot import swf/air file from flash catalyst, states error in code, there is nothing in the properties panel.

Hi Kristen
Have you tried using ActionScript 2? You might give that a go
and see if things improve.
Just a thought... Rick

Similar Messages

  • IWeb on macbook pro with mavericks cannot import old iWeb files from time machine back up

    Hi! The apple store completely wiped my macbook and installed mavericks. I made a time machine back up before bringing it in to be completely wiped. Computer had bad software so they recommended me to handpick items and bring them over to new operating system without completly putting the entire time machine back up on it.
    So I did but my only concern is Iweb. Now I got Iweb back installed in mavericks I cannot seem to import any files from my back up to my application in my renewed computer with mavericks. I searched for .domains, sites and sites2 but I cannot extract anything and I still have some old websites stored with Iweb and use the application quite a bit...
    Can anyone help?
    Thanks a million....

    Not sure what you mean by extract but this might help;
    If you're running Lion or later the Home/Library folder is invisible and that's where the domian files are located.  That folder will be invisible in the TM backups also.  Therefore  you can extract Domain files one at a time out of the TM backups for import into iPhoto.  You would do it as follows:
    1 - download and run Find Any File to search for a file named ".site".
    FAF can search areas that Spotlight can't like invisible folders, system folders and packages.
    2 - the search can take a while due to the structure of the TM backups.
    3 - select the backup from which you want to recover the Domain file.
    4 - drag the file from the search results window to the Desktop.
    If you recover more than one Domain file be sure to rename them after dragging to the Desktop so that you don't overwrite one with the next.
    5 - you can put the Domain file(s) in your Home/LIbrary/Application Support/iWeb folder but will have to make the library visible as follows:
    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible in Lion or Mt. Lion enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    For Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Optionsmenu to bring the this window:
    To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • Importing a custom component from Flash Catalyst with Assets

    I am experimenting with Flash Catalyst to see if it would work well for us to create components for Flash Builder to use. As a test I created a very simple component with a Pie Chart and a button and exported it as a fxpl file. In Flash Builder I created a Flex library project and imported the component to it. When I tried to use the component in a trivial test app it gave me an error, saying 'Could not resolve <graphics:fc_pie> to a component implementation', presumably because it had not put the component files in the right place of the library tree - by default they were put in a folder at the same level as components but with the name of the component, below which it had a components folder and an assets folder. If I move the files in these folders to the corresponding folders under src then it works fine.
    The question is, how do I get Flash Builder to do this correctly? I assume I'm missing something obvious but I am a real Flash Builder Novice and this process is about evaluating which tools to use. Sorry if I'm being a numpty. I'm using Flash builder 4.5 and Flash Catalyst CS5.5.
    Any help much appreciated.

    If you look in the library panel, there should be an entry for your custom component - probably something like CustomComponent1.mxml. Drag this out onto the artboard to create a new instance of the component.
    In the case of a custom component, you can't change much on the second instance. If you have something like a text input skin though, you can change the text it is displaying for each instance.
    We are working on making this sort of thing easier in the future, so stay tuned

  • How to import SQLite .db file from AIR project

    hi friends..
    how to import SQLite.db file from AIR project. and i want use this in my application.
    after importing can i update and delete the recordS?

    There's no import needed. You just open it using the AIR SQL APIs. If this database file was created outside AIR, it's not necessarily compatible, though. There are SQLite features and extensions that aren't supported in AIR.

  • I cannot import a Quicktime file (.mov) which I generated from a slide show out of iPhoto8 in iMovie8 (filename is grey); what did I wrong?

    I cannot import a Quicktime file (.mov) which I generated from a slide show out of iPhoto8 in iMovie8 (filename is grey); what did I wrong?

    iMovie 08 will only import files that contain codecs that it can edit. It will generally import audio and video codecs that iPhoto generates. However, if your iPhoto slideshow contains a manual advance track, iMovie cannot edit this and therefore will not import. In iPhoto, check to see if you can do a timed advance rather than a manual advance. Then it should import.

  • I cannot import music I bought from another site into iTunes.  The files are there but they won't import into Itunes.  How can I fix this?  Thanks!

    I cannot import music I bought from another site into iTunes.  The files are there but they won't import into Itunes.  How can I fix this?  Thanks

    What format are they in?
    What happens when you try?
    Have you tried placing a copy in the Automatically add to iTunes folder?
    tt2

  • Export version 10 SWF file from Flash CC

    Hello,
    I am trying to work out how to export a version 10 SWF file from Flash CC. Every media agency I am supplying files to requires version 10 but I can only export a Flash Player 10.3 file which creates a version 12 SWF.
    Does anyone have any advice other than buying an odler version of Flash....
    Thanks for your time.
    Keith

    you can use flash cs 6.  it's part of your cc subscription.
    or you can add fp 10 to flash cc.  here's a walk-through using fp 9: http://forums.adobe.com/message/5511080#5511080

  • FAQ: How can I make a SWF from Flash Catalyst scalable?

    The SWF files that Flash Catalyst publishes are fixed in size. Even if you set the size of the SWF manually when embedding it, the content created in Catalyst will remain the same size. However, with a small amount of work in Flash Builder, you can make your SWF scale to fit the width and height you want.
    Follow the instructions in this tip on FlashCats.
    Answered by: Bear Travis.
    Read original discussion.

    Welcome to our community
    Please take a look at the links below. Not only do they answer your question, they are there to help you get the best forum experience.
    Forum Participation Suggestions
    Frequently Encountered issues
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Cannot copy and paste files from laptop to ipad

    i cannot copy files from my windows laptop to ipad air. may someone tell me what to do
    i have also tried to sync my laptop with ipad but in vain
    jared

    1. Copy photos from computer to flash drive (wireless type)
    2. Transfer file from flash drive to iPad wirelessly
    http://www.sandisk.com/products/wireless/flash-drive/

  • So I updated to lightroom 3.6-now i cannot import any .nef files?

    so I updated to lightroom 3.6-now i cannot import any .nef files? is that what you call progress?

    Hi,
    I'm not sure why you think Lightroom 3 will support the D610 as it was only announced on October 8, 2013. Support for the D610 was released in the Lightroom 5.3 RC, see Lightroom 5.3 RC now available on Adobe Labs
    If you wish to use you D610 files in Lightroom 3.6 you will need to download the Adobe DNG Converter, convert your NEF to DNG and then import into Lightroom 3.6. The DNG Converter can be downloaded from http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
    Or, better option is to upgrade to the current version of Lightroom  

  • Import an FLV file from Adobe Connect into Premiere Elements 12?

    The Adobe Connect support staff recommended that we use Adobe Premiere Elements to edit the FLV file that we exported out of their software.  We purchased Adobe Premiere Elements 12 based on that advice.  Now we see that FLV files are not on the list of supported import files. 
    How can I import an FLV file from Adobe Connect into Adobe Premiere Elements 12 for editing?

    Welcome to the forum.
    Over the years, I have used Moyea's Flash Importer plug-in for PrPro, and it has worked perfectly. With about PrPro CS 4, IIRC, Adobe did add an FLV Importer, so Moyea began to suspend development of that plug-in. Then, with the release of the CC version of PrPro, they dropped FLV completely.
    Now, Moyea does have other programs, but I do not know if any of them are plug-ins for PrE. However, many of their programs can create, edit and output FLV.
    There is also a (free, if memory serves) FLV converter, FLV to AVI, which I used to convert FLV files, before I discovered the Moyea plug-in for my PrPro.
    I would look into Moyea, to see if there is anything, that will work as a plug-in to PrE, http://www.video-to-flash.com/products/, and if not, explore a program, such as FLV to AVI: http://www.pazera-software.com/products/flv-to-avi-converter/
    Good luck,
    Hunt

  • Cannot import any pic file type already on my "hard disk" to LR 4.4 library on macbook pro retina.

    Cannot import any pic file type already on my "hard disk" to LR 4.4 library on macbook pro retina. I am able to it on my pc win7-64 with LR 4.3. Any solution? Import from sd card works ok.

    Just found out I can open the pics in LR 4.4 and they go into the library. I just cannot import from LR4.4.  They are greyed out.

  • Can 9.3.1 ImportExport utility import an exported file from 9.2.0.0 ?

    Hi,
    Can 9.3.1 ImportExport utility import an exported file from 9.2.0.0 ?
    When I ran 9.3.1’s ImportExport utility to import 9.2’s export.csv, it gave me the following error messages:
    D:\Hyperion\common\utilities\CSSImportExportUtility\importexport>CSSImport.bat i
    mportexport2.properties
    Trace...
    2009-04-07 01:05:18,025 Attempting a import operation
    2009-04-07 01:05:20,728 Import : Attempting to create user admin
    2009-04-07 01:05:20,728 Import : Password not specified for user admin
    2009-04-07 01:05:20,744 Import : Unable to create user admin
    2009-04-07 01:05:20,744 Import : Create user admin failed. Attempting up
    date.
    2009-04-07 01:05:20,744 Import : Attempting to update user admin
    2009-04-07 01:05:20,775 Import : User updated : admin
    2009-04-07 01:05:20,790 Import : Attempting to create user essadmin
    2009-04-07 01:05:20,790 Import : Password not specified for user essadmi
    n
    2009-04-07 01:05:20,790 Import : Unable to create user essadmin
    2009-04-07 01:05:20,790 Import : Create user essadmin failed. Attempting
    update.
    2009-04-07 01:05:20,790 Import : Attempting to update user essadmin
    2009-04-07 01:05:20,806 Import : Unable to locate user essadmin
    The number of errors detected during the import operation exceeded the n
    umber of allowable errors. Please correct the errors and then rerun the program
    or increase the value of the import.maxerrors property.
    Aborting program...
    ====================
    We have a user essadmin in 9.2.0.0 but not in 9.3.1.
    Since we already have a user called admin in 9.3.1, I deleted user admin in export.csv file and tried to import again.
    The 9.3.1 ImportExport utility did not like the newly updated export.csv file

    Hello John,
    I'm exporting from 9.2.0.0.
    I'll try updating my 9.2's export file with password and resubmitting it.
    In the meantime, I was told 9.3.1 ImportExport will run in 9.2.0.0. However, everytime I tried that, it gives me the error
    When I run 9.3.1's cssexport.bat importexport.properties in 9.2.0's HSharedServices server, I get the error message:
    The system cannot find the path specified.
    I attach the importexport.properties file for your examination. All the paths are correct, such as:
    C:/Hyperion/SharedServices/9.2/AppServer/InstalledApps/WebLogic/8.1/CSS.xml
    C:/Hyperion/common/utilities/importexport931/trace.log
    What am I doing wrong?
    my css.xml file was found in /C:/Hyperion/SharedServices/9.2/AppServer/InstalledApps/WebLogic/8.1/CSS.xml.
    We are using weblogic. Is that the correct location?
    I don't get the above messages when I run 9.3.1's cssexport.bat importexport.properties in 9.3.1
    importexport.css=file:/c:/Hyperion/SharedServices/9.2/AppServer/InstalledApps/WebLogic/8.1/CSS.xml
    importexport.cmshost=localhost
    importexport.cmsport=58080
    importexport.username=admin
    importexport.password={CSS}MRcYv323uzxGr8rFdvQLcA==
    importexport.enable.console.traces=true
    importexport.trace.events.file=d:/Hyperion/common/utilities/CSSImportExportUtility/importexport/trace.log
    importexport.errors.log.file=d:/Hyperion/common/utilities/CSSImportExportUtility/importexport/errors.log
    importexport.locale=en
    importexport.ssl_enabled=false
    export.fileformat=csv
    export.file=d:/Hyperion/common/utilities/CSSImportExportUtility/importexport/exportHSS.csv
    export.internal.identities=true
    export.native.user.passwords=true
    export.provisioning.all=true
    export.delegated.lists=false
    export.user.filter=*
    export.group.filter=*
    export.role.filter=*
    export.producttype=*
    export.provisioning.apps=*

  • I can't get Premier Elements 10 to import an AVI file from my computer.

    I just bought Adobe Premier 10 two days ago, and I'm trying to import an AVI file from my computer.  It says Add Media Failure.  This type of file is not supported or the required codec is not installed.  The program installed all right, so I don't know what to do since I bought this software to create movies with the video from my camera, which is in AVI format.

    Hi Bill, thanks for replying so quickly.
    In review of your suggestions, I cannot see where these would be the answer. While I do use 2 computers, both have identical OS, APE-10, and Quicktime versions as well as camera software/drivers. I have not updated the camera firmware in some time, so I do not think this can be the issue, besides I have used both computers in the past few weeks, with no issues, until just recently. Perhaps it was a Win7 update that messed it up?
    However, while waiting for a forum response, I did some further research and found a codec pack (windows.7.codec.pack v.4.03) on CNET. The description sounded exactly like the issues I am having so I downloaded and installed it. (I also converted the original AVI files to MPEG-2, just in case).
    After the codec pack install, the AVI files loaded into APE and showed with no issues.
    I have not yet tried the MOV files as they were not mentioned in the codec pack info, other than; 'and many more'. (one issue at a time!) I did download and installed the latest QT app (but it was the same version I had) so maybe there was something corrupt in the original. We shall see!
    I cannot try it now as I am presently rendering the video, but if I still cannot load the full video MOV files, other than audio only, as old Arnie would say, "I'll be back!" (according to the APE estimate, about 1:12.
    Thanks again for the assist. If it helps you in any way, I will check the box that says the reply fixed the problem! ('Was this Helpful?')
    Doug

  • I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red (!) and says that its no data. I have tried with different cards and different cardreaders, but it

    I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red and says that its no data. I have tried with different cards and different cardreaders, but it is still the same. Why?!

    Please give us more specific information -
    What make/model camcorder are you using?
    Are you absolutely certain this is AVCHD video?  Tell us more about the video settings you used in the camcorder (eg, frame size, frame rate, quality level)
    Why are you attempting Log & Transfer from a card reader instead of from your camcorder?  Have you tried doing Log & Transfer from your camcorder?
    Are the SD cards straight from the camcorder, unaltered, or are you just using the cards as storage?
    Are you using FCE 4.0 or FCE 4.0.1?

Maybe you are looking for