Cannot import templates into DVDSP.....

Hello everybody...
Got a little trouble with DVD SP. I can see that all templates are no offered when I open the program so I try to import a new one from the corresponding folder... but nothing happens. DVDsp just doesn´t do it. Any hint about this ?
Thanks a lot

In the Destination Panel, make sure you've an available drive selected, and that there's enough room on it.

Similar Messages

  • Cannot import CDs into iTunes, disc is corrupted and unreadable error.

    Cannot import CDs into iTunes, keep getting disc is corrupted and unreadable error. Advice would be much appreciated. Thanks in advance!

    Thanks for the reply!
    I downloaded the program and ran it, got to the point where it says I have errors that need to be fixed... but it appears I have to pay for the rest of the program to actually repair these errors. Is this incorrect?
    If I do have to pay, then I'd like to look for an alternative... the program is $40; of course, that's cheaper than buying a new iPod, but I want to avoid that too.

  • I cannot import files into Muse.

    I cannot import files into the library in Muse.

    Hello,
    What are you trying to import in library folder ?
    Are you getting any error ?
    Which version of muse are you using and the operating system is 32 bit or 64 bit ?
    Regards
    Vivek

  • Cannot import clips into iMovie 08

    I have a few clips that were spliced together with QTPro and now I cannot import them into iMovie08. I have checked the movies themselves and I do not see any specific info that would cause a problem.
    I cannot drag and drop the clips into iMovie nor can I use the import function, as the .mov files are greyed out.
    This didn't happen before I upgraded to QT Pro.

    AAC, MPEG-4
    For the moment will assume you mean QT MPEG-4 here and not something like Microsoft's non-standard variation. (If not QT then please advise.) In the case that it is QT MPEG-4, did any of the source files contain extraneous tracks like an iPhoto slideshow with its "Tween" track. Such extraneous tracks are not understood by iMovie '08 and it will reject their import. If so, then use QT Pro to delete the extraneous track(s)

  • I have upgraded to Mavericks and I now cannot import DV into FCP through the capture presets.

    Since upgrading to Mavericks, I cannot import DV vision through my Sony FX-1E. I have tried various connections - DV to Firewire 400 + 800 with no success. I now have to get the vision ingested at another facility and exported to a hard drive in order to edit.
    Is there a way I can get vision into FCP?

    FCP (not FCPX) is legacy software, now EOL and not designed or guaranteed to work with Mavericks, some people report no problems others do, it depends on your setup. I'd suggest using iMovie to capture your footage then transfer to FCP to save using (or paying) another facility. An alternative (and my own solution) is a second boot drive with 10.8.5 and FCP 7 which still works OK.  

  • Cannot import audio into idvd 6

    Ok so, what is the deal:
    I am in idvd 6 and i try to import audio into my themes for drop box and only certain audio files work. The thing is it doesn't make a difference what kind of file for example aac or whatever.
    Does anyone know what i am even asking? What is the problem here?

    Cathy:
    This may or may not help...
    iMovie may not import protected AAC content correctly
    http://docs.info.apple.com/article.html?artnum=300456
    Cannot Hear/Use iTunes Package I Purchased
    http://www.danslagle.com/mac/iMovie/audio/1003.shtml

  • Cannot import files into iPhoto

    I have home movie files on an external hard drive that were downloaded there from my old Windows XP computer.  They are ".mov", ".mpg", and ".avi" file extensions.  When I try to import them into iPhotos on my iMac, running OS X Mavericks, I get a dialog box stating that they cannot be imported.  How do I get these movies onto my iMac.  Thank you for your help!

    There must be compatible with Quicktime formats:
    Media formats supported by QuickTime Player
    If you can open the movies with Quicktime, save or export within the app to a compatible format. Otherwise you'll have to use another 3r party software to convert those movies, or use another player to view the movies without converting them, but does will not fix your issue with iPhoto.

  • Cannot import .mxf into PPCC2014, but can into CS6 on same laptop.......huh?

    Just bought a new Asus laptop.
    i7-4710HQ CPU @ 2.50GHz
    16 GB ram
    64 bit Operation
    Nvidia Geforce GTX860m
    I installed PPCC2014. I cannot import .mxf files from a Canon XF300. I CAN import them into CS6 on the same laptop.
    I've been editing .mxf files on my desktop for years in PP, and for the last year on CC2014
    I tried taking the .mxf file out of the folder, (which contains .cif, .xml and .sif file) and importing alone and it doesn't work.
    The message I get is "unsupported or damaged file."
    I've tried importing by dragging and by using import in premiere.
    Anyone know what might be going on?
    Thanks for your help.
    Jessic

    Hi,
    I have come across this before. Seems Premiere Pro isn't properly activated. I would suggest the following steps:
    Sign out from the Creative Cloud app and Quit it (Quit option will be available after a few seconds).
    Now move the following folders to desktop:
    1) SLCache
    Windows: OS Drive\Program Files (x86)\Common Files\Adobe
    Mac: Library/Application Support/Adobe
    2) SLStore
    Windows: OS drive\ProgramData\Adobe
    Mac: Library/Application Support/Adobe
    3) OOBE
    Windows: OS Drive\Users\<username>\AppData\Local\Adobe
    Mac: /User/Library/Application Support/Adobe
    Launch Premiere Pro and sign in with your Adobe ID.
    NOTE: Make sure your Anti Virus/Firewall is not blocking any Adobe activation servers. Alternately, you can also check your 'hosts' file for any changes.
    If that doesn't help, i would suggest running the CC cleaner tool to uninstall Adobe apps and then reinstall:  Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Thanks,
    Rameez

  • Cannot Import Graphics Into Project

    I am experiencing some very odd behavior in RoboHelp 9 project. When I attempt to import/insert a graphic into a topic, I receive the message:
    Unable to rename file, "image.gif".
    The file contains illegal characters.
    First of all, I am NOT trying to rename the graphic. Secondly, the file name image.gif does not contain illegal characters. This happens for any graphic I attempt to import/insert into the project. Any ideas? Thanks in advance.

    Hi there
    If you click File > Rename Project (don't worry, we aren't really going to rename the project) what do you see at the bottom of the dialog where it shows the path?
    Just click Cancel to dismiss the dialog.
    Cheers... Rick

  • I cannot import music into itunes

    I use the request "add folder to itunes" but the files do not appear in my library. Neither does the request "add files to itunes". I am using windows and have the newest available version of Itunes. What can I do to successfully import multiple folders into itunes?

    You don't import files into the iTunes Media Folder. You import into iTunes. Post your iTunes issues in the iTunes forum:
    https://discussions.apple.com/community/itunes

  • Cannot Import Back into LR4 from PS

    I've been working on my macbook pro for years now exporting files from LR into PS, doing my edits, then saving and having the file automatically import back into LR.
    I just upgraded to an iMac and have everything set up, but, now, when I do the EXACT same process, I recieve the error "Could not save as "IMG_1445.tif" because write access was not granted." when trying to save my file in Photoshop.
    I have never had this problem before...Any help would be greatly appreciated! It seems pointless to have a workflow that doesn't work!!!
    If it has anything to do with it...I also get an error before exporting from LR: "This version of Lightroom may require the Photoshop Camera Raw Plug-in version 7.4 for full compatibility"
    I checked my software and it is up to date. Why would I receive this error when exporting?
    Thanks for any insight!!!

    Thanks for the tip. I actually figured it out by luck. Turns out that for some reason my external drive was showing as "read only" on the iMac even though it has has full permissions on the MacBook. So, I went to the Seagate support page and downloaded their Mac DNG file for the drive. Works perfectly now!
    Thanks for the response, I appreciate the support!

  • Cannot Import Files Into Logic Pro 7.1!

    I just recieved Logic Pro and I cannot import any files. My goal is to import XML's from FCP and OMF's from FCP. In the file type drop down menu it only lists:
    MIDI Files
    OpenTL Files
    and SysEx Files
    There is no option for XML or OMF or even AIFF...
    Any help would greatly appreicated...
    Thanks,
    - JE

    Hi Jarret
    I guess I can give it one more shot,
    What version of Logic 7.1.0? or 7.1.1
    Do you have the Latest pro Application Support?
    http://www.apple.com/support/downloads/proapplicationsupport30macosx104.html

  • Cannot import video into LR4

    I have videos from Canon FS100 (SD video in .mpg). I can view/ playback in windows, Adobe Premier Pro and edit them also. But LR40 cannot import them - no preview , and when I import it says "There is problem with file". Tried reboot / quicktime update erc. No effect. LR3 can import and playback these files!
    Any help appreciated.

    I am having the exact same problem - trying to add my video folder which has my mpg files and getting the same message.  I've seen many posts with people with similar issues but haven't seen any fixes - Adobe, please help!
    Thanks, Mike

  • Cannot Import PowerPoint into Responsive Design Template

    Hi,
    I have a PowerPoint which needs to be converted to a Responsive Design Project. I notice that when I create a new Responsive design project, the Import PowerPoint is greyed out.
    Is this normal?
    Also if I create a basic Captivate Project, is it possible to convert it to a responsive project if a client decides they require this, without a complete rebuild?
    thanks

    It is not possible to import Powerpoint slides in a responsive project at all, seems logical to me but will not bother you with an explanation. The technique, programming is so different. The provided themes are responsive, PPT is not.
    Same negative answer for your second question, for the same reason. You can use the assets from PPT, but will have to create your own responsive project.
    Lilybiri

  • Cannot import photos into iPhoto

    I can't get my .jpg files to import into iTunes. Everytime I try to import one it says "The following files could not be imported (they may be an unrecognized file type or the files may not contain Valid data).

    Hi Lori,
    I am having the same (i think) problem as el pinguino. With many of the photos I have on CD's I am getting this error for most of the photos... iphoto will usually import a few of the photos. I tried dragging onto the desk top first, but an error came up saying "you cannot copy 'name of file i'm trying to copy' to the destination because its name is the same as the name of an item on the destination, except for the case of some characters." Do you have any thoughts on how I might deal with this? Or does anyone else?
    ibook   Mac OS X (10.4.4)  
    ibook   Mac OS X (10.4.4)  

Maybe you are looking for

  • Multiple ipods on single computer?

    Can I manage 2 ipods on a single computer? My wife wants one now . . . Are there any gotchas? Things to know before I buy the 2nd one? wayne

  • Error while reading the PO in the Backend system   !

    Hi all, We  are working on SRM 5.0(SP12) and Extended classic scenario. The problem is that after the PO ís ordered it gives the message " Error while reading PO in backend system Inform system administrator" . When I check the PO number in R/3 it do

  • How to use Material Group in substitution rule

    Hello, Anyone experience in how to use the entry of the material group of a PO, in a substitution rule for accounting documents. I have noticed the material number can be used within a substitution rule, and is also available in BSEG... so far have n

  • SEM_CONTAINS and rulebases

    Hi, How do I perform a query using SEM_CONTAINS making use of rulebases? Thanks.

  • Blu-ray Error: "file not found", Code 8 and "Fatal Error", Code 6 Bug Resolution

    Hello All, After 4 wasted hours, I found that a Blu-Ray build will fail if the name you give the disc (altered from the default, "Untitled Project") is over a certain number of characters.  The interesting thing is, a DVD build using the same timelin