Cannot import video files into FCP

Every time I try to import a file (.mov , .mpg , .m4v) FCP gives me an error message reading "File Error: File Unknown" If I try and import through the drop down menu, the error reads "File Error: 1 file(s) Recognized, 0 access denied, 1 unknown"
The only file that seems to work is a .avi
This started happening when I upgraded to Snow Leopard.
Please Help

Here's a couple solutions ...
I had this problem this week as well. Suddenly I couldn't import any type of media into FCP. After trying a few things like reinstalling FCS 2 and talking to other people, I called up Apple Support. They walked me through a few more efforts to solve the issue or at least get an idea of what causes the problem.
What we discovered is that when I created a new user profile for my iMac and logged into that profile, everything in Final Cut worked fine. I could import media with no problem. THUS, the issue seems to be connected to my computer profile. So I was presented with two options:
Option 1: Create a new user profile and either migrate all my content over to it or simply edit from that profile.
Option 2: The Nuclear Option. Back up all your content you don't want to loose, pop in your OS X disk, restart the computer holding C, and select the option to erase your hard drive and install OS X from scratch.
I figured that after two years of a **** of a lot of editing and other work on this computer, it was time to just go for the Nuclear option and obliterate everything off of it and start fresh. Takes a while to do, but I've just confirmed that I'm able to import media again in FCP.
So, sadly it's not a real simple option like deleting your preference files, like other FCP issues, but there is way to clear up this issue. The important thing to note here is that reinstalling FCP didn't work for me, and doing an Archive Install of OS X which still keeps my user profile essentially intact also keep the problem intact and solves nothing.
Now, if you have to get a project your editing out the door right away, just create a new profile and get busy editing. But once that project is done, or if you have the time right now, I think the best option is the Nuclear Option. Back your stuff up and then clear your hard drive out and start anew.
I hope that helps guys. I know how crazy I was going not finding anything on a forum to help me out.

Similar Messages

  • Cannot import video file into LR5

    I'm trying to import a video file (.vob) into LR5 do do some basic editing. When I point LR at the folder it cannot "see" the file and so will not import it.
    Does LR look for specific file types? If so which ones?
    Working in win7 64bit  and LR 5.2
    Always had great help from user forums so I look forward to hearing from you guys
    thanks

    Generally, Lightroom supports video files from DSLR cameras and camcorders. Here is a full list of supported files:
    http://helpx.adobe.com/lightroom/kb/video-support-lightroom-4-3.html

  • Importing QT files into FCP

    Hi there I'm a FCP newbie,
    I 'm trying to import QT files into FCP, I extracted two files off a DVD using handbrake tp MP4 format and then opened them with Quicktime Pro and compressed them as a QT.mov. One of the movies imported successfully into FCP the other did'nt, and the error message I file recognized (0) access denied 1 unknown. Note I have used exactly the same compression settings for both files, any help would be appreciated.

    MP4 is a delivery codec. To make things easier, use MPEG Streamclip to do the DVD extraction. That will extract the video directly into a Quicktime movie file which FCP can edit natively.
    MacBook Pro 2.33GHz/2GB RAM/160GB HD/256MB VRAM   Mac OS X (10.4)   Apple Pro Certified, Final Cut Pro 5-Level 1

  • Not able to import .motn files into FCP

    For some reason I'm not able to import .motn files into FCP. While in FCP, I use "send to motion" and uncheck the embed box. After motion opens and I add my motion content, I get the following error when trying to import the .motn file back into FCP "File Error: 1 files(s) recognized, 0 access denied, 1 unknown". What is strange is that I'm able to create another test FCP project with different media, and everything works fine. All tests and media are done on the same drive.
    I'm using the latest updates of everything FCP 5.0.4 and motion 2.0.1
    Any ideas anybody?
    Thanks!
    G5 Mac OS X (10.4.6)

    Check the frame rate - that can sometimes interfere...
    Patrick

  • If I actually import full files into FCP, can I then drop source files into the trash?

    If I actually import full files into FCP, can I then drop source files into the trash?   I'm editing now and want to free up HD space.

    Just to confirm: in Preferences, Import, Files..."copy to library storage location" is selected.
    So I assume I can dispose of source files.
    Thanks for quick reply and also the the cautionary note. 
    This is low-level family footage I export to .mov and share on YouTube, so originals are not critical.

  • Trouble importing .mov files into FCP X

    I'm relatively new to FCP so this could be a really easy fix. I took a bunch of short video clips (20s --> 1.5 min) on my Panasonic ZS25 and imported the clips to my MacBook Pro (2008 with 2GB 1067 MHz DDR3 Memory and 2.26 GHz Intel Core 2 Duo Processor). [I have version 10.8.4 of OSX]. The clips from my camera were in .mts format so I used the Smart Convertor Pro App from the App Store to convert all 80 files to a .mov format. Both the converted clips and FCP X are stored on my 700 GB external, and while I tried to import the clips into FCP X, the program almost immediately froze and shut down. Thinking I "overloaded" (for lack of a better word) FCP X, I decided to try and delete the blank clips that were showing up in the program. However each time I attempted to click on a clip the program crashed again. I eventually was able to delete all the clips, and decided to move the converted clips from my external to my desktop. Once they were moved I then tried to import just one clip from the desktop to FCP X (which is still run through my external). Although it was successfully imported, once I clicked on the file to play it in FCP X the program crashed again.
    What can possibly be the problem and what can I do to fix it?
    Note: This is my first time using both my new camera (and having to deal with this .mts BS) as well as FCP X.

    Thanks Russ, Tom, and Hughmass for all your input. It really is appreciated. Unfortunatly even after moving FCPX to my desktop and converting the .mov files in MPEGstreamclip, importing the movie clips into the program still causes random shut downs. Perhaps the clips are corrupted or something? I honestly don't know, and I'd rather kind of just ignore this problem then keep hashing away seeing as the clips aren't that important (and yes, being super smart, i deleted them off the camera well before hand).
    Just to make sure FCPX works, I took some short clips on my Panasonic DMCZS25, and imported them successfully into FCPX and was able to edit together a quick piece. Thanks again for all your help!

  • Cannot import video file from Canon Vixia hfs10 to imovie'11.

    Hi this is my first post on this site.
    I am having trouble trying to import video files from Canon Vixia hfs10 to imovie'11. The computer does not even recognize this camcorder. When I do a PC connection, iphoto comes up, but all it tells me to import are the pictures that I have taken.
    No matter what I do, I cannot find the folder for my camcorder in the device section in the finder.
    When I try to import it on imovie, I only get an option for facetime camera and not my vixia.
    Please help!

    Hi this is my first post on this site.
    I am having trouble trying to import video files from Canon Vixia hfs10 to imovie'11. The computer does not even recognize this camcorder. When I do a PC connection, iphoto comes up, but all it tells me to import are the pictures that I have taken.
    No matter what I do, I cannot find the folder for my camcorder in the device section in the finder.
    When I try to import it on imovie, I only get an option for facetime camera and not my vixia.
    Please help!

  • Importing video files into Adobe Premiere Pro CS3

    I own a Sony Handycam DCR-SX63.  When I import the movies I have taken onto my PC (Vista) they are .MPG files.  When I import these files into Premiere Pro CS3 the video portion imports but the audio of that file does not.  I have read all I can find and nothing seems to answer my question directly.  I tried an encoder to see if maybe Premiere doesn't accept .MPG files.  I converted it to .AVI file and tried to import and that gave me audio with no video.  I tried opening the new project with a dozen different settings offered up by Premiere but every one I tried gave me the same outcome when I tried to import my video file.
    Please. please. please help.  I am pulling my hair out.
    I appreciate any help given.
    Thanks

    First... To work with AC3 sound files in Premiere CS3, copy the ad2ac3dec.dll file from the Encore CS3 directory into the Premiere directory
    Second... Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    Report back with the codec details of your file, use the programs below
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    IF your files are MJPEG...
    MJPEG edit with Morgan or MainConcept http://www.morgan-multimedia.com/
    http://www.mainconcept.com/site/prosumer-products-4/motion-jpeg-codec-785/information-797. html

  • Problem importing video files into slideshow in Photoshop Elements 9

    I am able to import the files into my slideshow, but it won't let me save it.  It reports an error in saving.  Help!

    When converting the videos try decreasing the bitrate or changing the file type (perhaps to the iPod native .m4v)
    Other than that, you could try a different encoder, like iSquint (isquint.org). It's the one that I use and I even have a QT Pro license.

  • How to import video files  into BLOB datatypes

    Dear ,
    Can any one help me to find out the way throuh which i insert video files into tables using BLOB data type.
    Faheem Latif
    Team Lead - Lease Soft
    NetSol Technologies Limited Pakistan.
    www.netsoltek.com, www.leasesoft.biz

    http://www.oracle-base.com/articles/8i/ImportBlob.php
    This is to import any BLOB file onto table column.
    Cheers
    Sarma.

  • Cannot import PDF files into iPhoto 4.0.3

    Is it possible to import PDF files into iPhoto 4.0.3? I can't drag and drop them into iphoto folders without the "Unreadable Files" error. I have tried importing them through the iPhoto menu and still get the same results. I have tried importing the PDF files from several places such as my desktop because I wondered if the location of the original made a difference, but that doesn't seem to help. I didn't find anything when I searched for this problem here in the forum so I wondered if anyone else is having the same problems.
    Any help would be appreciated.
    Thanks,
    Morgan

    No because I had iPhoto 4 open and tried to run the Save PDF to iPhoto on a book in that library. I think it's just the different data structure, etc.. It's just not compatible with Automator or at least that particular workflow. I tried printing to PDF from V4 and then do the Save to iPhoto from Preview with V4 open and I still get the error message. So iPhoto 4 is just not compatible with that workflow.
    A workaround is to create a PDF file of the whole book and then manually save each page as a jpg file and import those. That's what I did for my first book. You could do a screen shot of each page in the preview mode and use those but the resolution will be limited to screen resolution, 72dip. You will get resolutions on the order of 150-200 dpi thru the Save As route in Preview or the Save to iPhoto automator method.
    I'm sure you could create an Automator workflow that would take the PDF file and save each page as a jpg file and name it sequentially. I'll have to take a closer look at Automator soon.

  • Hi, I can not import video files into iMovie.

    I can open iMovie however can not import video files. the iMovie application just hangs and I have to force quit to start again and once again get the same problem.
    I have uninstalled and reinstalled iMovie.

    Yosemite sometimes has problems, often related to "default" permissions needing to be changed
    -one person's solution https://forums.adobe.com/thread/1689788
    -and a Java update https://forums.adobe.com/thread/1507936
    MOV is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    https://forums.adobe.com/thread/1070933 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • I cannot import my files into my project

    I am trying to import my files into my project but when I right click the file, nothing happens.  It does not give me an option to import. Nothing comes up at all.

    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840

  • Cannot import .mov files into FCE

    I bought a new Kodak Zi8 pocket video camera to use to finish a video project because my right hand is in a cast and I cannot use my HD video camera. Unfortunately for me, I have a deadline to meet.
    I shot video at 720p and tried to import it into FCE 4.0.1 to edit using Log and Transfer and got the warning message, '"863_0156.MOV" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.' I also shot video at 1080p and, of course, cannot import it into FCE either using Log and Transfer.
    I am still a relatively new FCE user and would appreciate any suggestions you can give me. I looked in Tom's book (FCE 4 Editing Workshop)on page 73. Will Quicktime Pro 10 convert the files? If so what is the procedure?
    I have seen similar questions in this discussion forum on importing .mov files, but I haven't seen a solution that works for me. How can I convert the .mov files to get Log and transfer in FCE to accept them?

    Hi(Bonjour)!
    This pocket camera record H.264. So the material as to be converted to a format supoported natively by FCE as Apple Intermediate Codec 1080. Search this forum with +MPEG streamclip+ keyword.
    Michel boissonneault

  • Trouble importing .mov files into FCP...

    Hello, all. Hope someone can help me solve this problem.
    I just installed Final Cut Pro on my machine, much to my delight, and immediately set about attempting to edit a video project I was commissioned for. However, I quickly stumbled into a big problem: the files I'm attempting to edit (all .mov format) refuse to import properly into FCP. Despite the fact that they play flawlessly in Quicktime, when imported to FCP, they require an inordinate render time when placed in a sequence and, what's worse, do not render properly. The picture jumps frames in the preview, and, once rendered, a red flash is introduced in place of the missing frames, generating a seizure-inducing mess that is already giving me quite a headache.
    How can I fix this problem? I am open to the idea of file conversion, but don't understand why .mov won't work. I've searched the Internet for answers and found little to no information on how to solve this. Please help!

    My problem, every single movie file that i import will show red in FCP, no exception.
    That means that you are brining in QT file types that FCP does not work with natively.
    I cant imagine what file/codec type FCP is designed for but I tried files from my phone, two different video cams and two different still cams with video option.
    FCP is designed to work with professional cameras, and a slew of consumer types. It is NOT suited for raw cel phone video, and most video types that point and shoot cameras record. For those cameras you need to convert the footage to the type that FCP works with. If you look in the EASY SETUPS in the Final Cut Pro menu, you will see the codecs that FCP works with.
    ALL of these BTW, work in imovie.
    Because it is meant to be used with consumer formats. But note, it converts a lot of the footage to an Apple codec in the background...or does rendering in the background to a uniform codec. It is designed for people who just want to drop footage in and go. But lacks many professional attributes. BUT, if it works, use that.
    Is it just a fact of life that I have to get all types of video codec conversion software to be able to use FCP with typical video files?
    Just one...MPEG STREAMCLIP. Convert everything to DV/NTSC.
    Or get Adobe Premiere Pro. It is designed to work with files natively.
    Shane

Maybe you are looking for