"cannot initialize surround mixer" er

Hi,
My operating system was Win98 and Creative SB Li've Value was working without any problems...
But I changed the OS to Windows XP Pro, and now when I open creative surround mixer, I get message..
Can some-one advise me something about this problem please?
Thanks,
Murat

Murat,
Did you install a driver package from the website?
After you install an XP driver (the original CD is not meant for XP), check in Control Panel > Sounds & Audio that the card is selected as the Playback Device.
Cat

Similar Messages

Cannot set up a microphone in surround mixer - SB Audigy 2 - updated with new drive

hy!
i cannot set up a microphone in surround mixer. this happend since i update the old drivers from CD rom (got with my audio card SB Audigy 2)with new drivers from your update site (SBAX_PCDRV_LB_2_8_000). i have made 2 screenshots that you can also see my problem. http://shrani.si/f/3J/pj/Py0pLJs/sb-audigy-2.jpg and http://shrani.si/f/3V/AO/hFfBELP/sb-audigy-2-2.jpg
on the pictures you can see that i can choose only between "cd digital/ s/pdif-in" or "cd digital/auxiliary". there is no microphone to choose. i didnt have that problem with older drivers!
have i installed a wrong audio card drivers or something?
please help!

ok. i have found a beta driver and i will try it.i?hope it work since nobody doesnt reply on this thread!
EDIT: now i can use microphone and for now its working just fine.
it would be nice from you that you tell me about this beta drivers. i spend a few hours to find drivers that could work!
but tnx anyway!
Message Edited by bostjand on -07-2008 03:00 PM

No longer able to select speaker type in Surround Mixer (Audigy Platinum Win XP P

Hi, all. I have an Audigy Platinum. Normally I have no issues using my 5. speakers with this card; however, today I noticed my sound was "tinny" and the reason is that the surround mixer is locked on Headphones. I cannot click the arrow to change it to 5. surround or anything else for that matter. I've gone into Control Panel and unchecked the mute other speakers when headphones are plugged in option, but that hasn't seemed to help. Any other ideas?Thanks in advance.

Thanks for the reply. That did the trick.
Message Edited by ObiJuan on 05-29-20070:56 PM

Power map- Cannot initialize DirectX

I am running windows 7 in a VM with MS office 2013. I have installed power map for excel 2013. When I try to launch power map in excel it gives this error "Cannot initialize DirectX. Confirm that you hardware supports DirectX 10 or later and that you
have the latest video card driver installed."
Here is the DXdiag output:
System Information
Time of this report: 1/9/2014, 20:40:02
Machine name: VW7-SB12
Operating System: Windows 7 Enterprise 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130828-1532)
Language: English (Regional Setting: English)
System Manufacturer: VMware, Inc.
System Model: VMware Virtual Platform
BIOS: PhoenixBIOS 4.0 Release 6.0
Processor: AMD Opteron(TM) Processor 6220 , ~3.0GHz
Memory: 2048MB RAM
Available OS Memory: 2048MB RAM
Page File: 1191MB used, 2903MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
DxDiag Notes
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Input Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: RDPDD Chained DD
Manufacturer:
Chip type:
DAC type:
Device Key: Enum\
Display Memory: 348 MB
Dedicated Memory: 160 MB
Shared Memory: 188 MB
Current Mode: 1364 x 768 (16 bit) (60Hz)
Driver Name:
Driver File Version: ()
Driver Version:
DDI Version: 9Ex
Driver Model: unknown
Driver Attributes: Final Retail
Driver Date/Size: , 0 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
Device Identifier: {D7B70EE0-4340-11CF-0767-0120A1C2CA35}
Vendor ID: 0x0000
Device ID: 0x0000
SubSys ID: 0x00000000
Revision ID: 0x0000
Driver Strong Name: Unknown
Rank Of Driver: Unknown
Video Accel:
Deinterlace Caps: n/a
D3D9 Overlay: Not Supported
DXVA-HD: Not Supported
DDraw Status: Not Available
D3D Status: Enabled
AGP Status: Not Available
Sound Devices
Description: Remote Audio
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID:
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: {3.0.0.00000002}.{6C26BA7D-F0B2-4225-B422-8168C5261E45}
Driver Version: ()
Driver Attributes: Final Retail
WHQL Logo'd: n/a
Date and Size: , 0 bytes
Other Files:
Driver Provider:
HW Accel Level: Basic
Cap Flags: 0x0
Min/Max Sample Rate: 0, 0
Static/Strm HW Mix Bufs: 0, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Sound Capture Devices
DirectInput Devices
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
USB Devices
Gameport Devices
PS/2 Devices
Disk & DVD/CD-ROM Drives
Drive: C:
Free Space: 15.7 GB
Total Space: 51.2 GB
File System: NTFS
Model: VMware Virtual disk SCSI Disk Device
Drive: Z:
Model: NECVMWar VMware IDE CDR00 ATA Device
Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7601.17514 (English), , 0 bytes
System Devices
Name: vmxnet3 Ethernet Adapter #3
Device ID: PCI\VEN_15AD&DEV_07B0&SUBSYS_07B015AD&REV_01\FF56500088269FFE00
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&C0
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&B8
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&B0
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&A8
Driver: n/a
Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_8086&DEV_7191&SUBSYS_00000000&REV_01\3&2B8E0B4B&0&08
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&C7
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&BF
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&B7
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&AF
Driver: n/a
Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_15AD&DEV_0790&SUBSYS_079015AD&REV_02\3&2B8E0B4B&0&88
Driver: n/a
Name: Intel 82443BX Pentium(R) II Processor to PCI Bridge
Device ID: PCI\VEN_8086&DEV_7190&SUBSYS_197615AD&REV_01\3&2B8E0B4B&0&00
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&C6
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&BE
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&B6
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&AE
Driver: n/a
Name: VMware VMCI Bus Device
Device ID: PCI\VEN_15AD&DEV_0740&SUBSYS_074015AD&REV_10\3&2B8E0B4B&0&3F
Driver: n/a
Name: Intel(R) 82371AB/EB PCI Bus Master IDE Controller
Device ID: PCI\VEN_8086&DEV_7111&SUBSYS_197615AD&REV_01\3&2B8E0B4B&0&39
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&C5
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&BD
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&B5
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&AD
Driver: n/a
Name: VMware SVGA 3D
Device ID: PCI\VEN_15AD&DEV_0405&SUBSYS_040515AD&REV_00\3&2B8E0B4B&0&78
Driver: n/a
Name: Intel 82371AB/EB PCI to ISA bridge (ISA mode)
Device ID: PCI\VEN_8086&DEV_7110&SUBSYS_197615AD&REV_08\3&2B8E0B4B&0&38
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&C4
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&BC
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&B4
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&AC
Driver: n/a
Name: LSI Adapter, SAS 3000 series, 8-port with 1068
Device ID: PCI\VEN_1000&DEV_0054&SUBSYS_197615AD&REV_01\4&1F16FEF7&0&00A8
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&C3
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&BB
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&B3
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&AB
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&C2
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&BA
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&B2
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&AA
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&C1
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&B9
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&B1
Driver: n/a
Name: PCI Express standard Root Port
Device ID: PCI\VEN_15AD&DEV_07A0&SUBSYS_07A015AD&REV_01\3&2B8E0B4B&0&A9
Driver: n/a
DirectShow Filters
DirectShow Filters:
WMAudio Decoder DMO,0x00800800,1,1,WMADMOD.DLL,6.01.7601.17514
WMAPro over S/PDIF DMO,0x00600800,1,1,WMADMOD.DLL,6.01.7601.17514
WMSpeech Decoder DMO,0x00600800,1,1,WMSPDMOD.DLL,6.01.7601.17514
MP3 Decoder DMO,0x00600800,1,1,mp3dmod.dll,6.01.7600.16385
Mpeg4s Decoder DMO,0x00800001,1,1,mp4sdecd.dll,6.01.7600.16385
WMV Screen decoder DMO,0x00600800,1,1,wmvsdecd.dll,6.01.7601.17514
WMVideo Decoder DMO,0x00800001,1,1,wmvdecod.dll,6.01.7601.18221
Mpeg43 Decoder DMO,0x00800001,1,1,mp43decd.dll,6.01.7600.16385
MS ATC Screen Decoder 1,0x00600800,1,1,scdec.dll,8.00.6362.0202
Mpeg4 Decoder DMO,0x00800001,1,1,mpg4decd.dll,6.01.7600.16385
ffdshow Video Decoder,0xff800001,2,1,ffdshow.ax,1.01.3467.0000
ffdshow DXVA Video Decoder,0xff800002,2,1,ffdshow.ax,1.01.3467.0000
ffdshow raw video filter,0x00200000,2,1,ffdshow.ax,1.01.3467.0000
ffdshow Audio Decoder,0xff800001,1,1,ffdshow.ax,1.01.3467.0000
DV Muxer,0x00400000,0,0,qdv.dll,6.06.7601.17514
MPC - Mpeg Source (Gabest),0x00400000,0,0,MpegSplitter.ax,1.03.1976.0000
Color Space Converter,0x00400001,1,1,quartz.dll,6.06.7601.17713
WM ASF Reader,0x00400000,0,0,qasf.dll,12.00.7601.17514
Screen Capture filter,0x00200000,0,1,wmpsrcwp.dll,12.00.7601.17514
AVI Splitter,0x00600000,1,1,quartz.dll,6.06.7601.17713
VGA 16 Color Ditherer,0x00400000,1,1,quartz.dll,6.06.7601.17713
SBE2MediaTypeProfile,0x00200000,0,0,sbe.dll,6.06.7601.17528
Microsoft DTV-DVD Video Decoder,0x005fffff,2,4,msmpeg2vdec.dll,12.00.9200.16426
MONOGRAM AMR Splitter,0x00600000,1,1,mmamr.ax,1.00.0001.0000
AC3 Parser Filter,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528
StreamBufferSink,0x00200000,0,0,sbe.dll,6.06.7601.17528
MJPEG Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713
MPEG-I Stream Splitter,0x00600000,1,2,quartz.dll,6.06.7601.17713
SAMI (CC) Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514
MPEG-2 Splitter,0x005fffff,1,0,mpg2splt.ax,6.06.7601.17528
MPC - MP4 Source,0x00600000,0,0,MP4Splitter.ax,1.03.1976.0000
Closed Captions Analysis Filter,0x00200000,2,5,cca.dll,6.06.7601.17514
SBE2FileScan,0x00200000,0,0,sbe.dll,6.06.7601.17528
Microsoft MPEG-2 Video Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514
MPC - FLV Splitter (Gabest),0x00600000,1,1,FLVSplitter.ax,1.03.1976.0000
Internal Script Command Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713
MPEG Audio Decoder,0x03680001,1,1,quartz.dll,6.06.7601.17713
WavPack Audio Decoder,0x00600000,1,1,WavPackDSDecoder.ax,1.01.0000.0484
DV Splitter,0x00600000,1,2,qdv.dll,6.06.7601.17514
MONOGRAM AMR Decoder,0x00600000,1,1,mmamr.ax,1.00.0001.0000
Video Mixing Renderer 9,0x00200000,1,0,quartz.dll,6.06.7601.17713
MONOGRAM Musepack Decoder,0x00600000,1,1,mmmpcdec.ax,0.09.0002.0000
Haali Media Splitter,0x00800001,0,1,splitter.ax,1.10.0175.0000
Haali Media Splitter (AR),0x00400000,1,1,splitter.ax,1.10.0175.0000
Microsoft MPEG-2 Encoder,0x00200000,2,1,msmpeg2enc.dll,6.01.7601.17514
MPC - MP4 Splitter,0x00600000,1,1,MP4Splitter.ax,1.03.1976.0000
File Source (Monkey Audio),0x00400000,0,1,MonkeySource.ax,
ACM Wrapper,0x00600000,1,1,quartz.dll,6.06.7601.17713
madFlac Decoder,0x00600000,1,1,madFlac.ax,1.08.0000.0000
Video Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713
MPEG-2 Video Stream Analyzer,0x00200000,0,0,sbe.dll,6.06.7601.17528
Line 21 Decoder,0x00600000,1,1,qdvd.dll,6.06.7601.17835
Video Port Manager,0x00600000,2,1,quartz.dll,6.06.7601.17713
Video Renderer,0x00400000,1,0,quartz.dll,6.06.7601.17713
Haali Video Renderer,0x00200000,1,0,dxr.dll,
VPS Decoder,0x00200000,0,0,WSTPager.ax,6.06.7601.17514
WM ASF Writer,0x00400000,0,0,qasf.dll,12.00.7601.17514
VBI Surface Allocator,0x00600000,1,1,vbisurf.ax,6.01.7601.17514
File writer,0x00200000,1,0,qcap.dll,6.06.7601.17514
Haali Simple Media Splitter,0x00200000,0,1,splitter.ax,1.10.0175.0000
DirectVobSub,0x00200000,2,1,vsfilter.dll,2.39.0005.0003
DirectVobSub (auto-loading version),0x00800002,2,1,vsfilter.dll,2.39.0005.0003
MONOGRAM AMR Encoder,0x00600000,1,1,mmamr.ax,1.00.0001.0000
DVD Navigator,0x00200000,0,3,qdvd.dll,6.06.7601.17835
Overlay Mixer2,0x00200000,1,1,qdvd.dll,6.06.7601.17835
Haali Matroska Muxer,0x00200000,1,0,splitter.ax,1.10.0175.0000
AVI Draw,0x00600064,9,1,quartz.dll,6.06.7601.17713
MONOGRAM AMR Mux,0x00600000,1,1,mmamr.ax,1.00.0001.0000
RDP DShow Redirection Filter,0xffffffff,1,0,DShowRdpFilter.dll,
DC-Bass Source,0x00400000,0,1,DCBassSource.ax,1.02.0000.0000
Microsoft MPEG-2 Audio Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514
WST Pager,0x00200000,1,1,WSTPager.ax,6.06.7601.17514
MPEG-2 Demultiplexer,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528
DV Video Decoder,0x00800000,1,1,qdv.dll,6.06.7601.17514
ffdshow Audio Processor,0x00200000,1,1,ffdshow.ax,1.01.3467.0000
SampleGrabber,0x00200000,1,1,qedit.dll,6.06.7601.18175
Null Renderer,0x00200000,1,0,qedit.dll,6.06.7601.18175
MONOGRAM Musepack Splitter,0x00600000,1,1,mmmpcdmx.ax,0.04.0000.0000
madFlac Source,0x00600000,0,1,madFlac.ax,1.08.0000.0000
MPEG-2 Sections and Tables,0x005fffff,1,0,Mpeg2Data.ax,6.06.7601.17514
Microsoft AC3 Encoder,0x00200000,1,1,msac3enc.dll,6.01.7601.17514
MPC - FLV Source (Gabest),0x00600000,0,0,FLVSplitter.ax,1.03.1976.0000
StreamBufferSource,0x00200000,0,0,sbe.dll,6.06.7601.17528
Smart Tee,0x00200000,1,2,qcap.dll,6.06.7601.17514
Overlay Mixer,0x00200000,0,0,qdvd.dll,6.06.7601.17835
AVI Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713
AVI/WAV File Source,0x00400000,0,2,quartz.dll,6.06.7601.17713
MPC - MPEG4 Video Splitter,0x00600000,1,1,MP4Splitter.ax,1.03.1976.0000
Wave Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
MIDI Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
Multi-file Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
File stream renderer,0x00400000,1,1,quartz.dll,6.06.7601.17713
WavPack Audio Splitter,0x00600000,1,1,WavPackDSSplitter.ax,1.01.0000.0323
ffdshow subtitles filter,0x00200000,2,1,ffdshow.ax,1.01.3467.0000
MPC - Mpeg Splitter (Gabest),0x00400001,1,1,MpegSplitter.ax,1.03.1976.0000
Microsoft DTV-DVD Audio Decoder,0x005fffff,1,1,msmpeg2adec.dll,6.01.7140.0000
StreamBufferSink2,0x00200000,0,0,sbe.dll,6.06.7601.17528
AVI Mux,0x00200000,1,0,qcap.dll,6.06.7601.17514
MPC - MPEG4 Video Source,0x00600000,0,0,MP4Splitter.ax,1.03.1976.0000
Line 21 Decoder 2,0x00600002,1,1,quartz.dll,6.06.7601.17713
File Source (Async.),0x00400000,0,1,quartz.dll,6.06.7601.17713
File Source (URL),0x00400000,0,1,quartz.dll,6.06.7601.17713
WebM VP8 Decoder Filter,0x00600000,1,1,vp8decoder.dll,0.09.0007.0000
Haali Video Sink,0x00200000,1,0,splitter.ax,1.10.0175.0000
AC3File,0x00600000,0,1,ac3file.ax,
Infinite Pin Tee Filter,0x00200000,1,1,qcap.dll,6.06.7601.17514
Enhanced Video Renderer,0x00200000,1,0,evr.dll,6.01.7601.17514
BDA MPEG2 Transport Information Filter,0x00200000,2,0,psisrndr.ax,6.06.7601.17669
MPEG Video Decoder,0x40000001,1,1,quartz.dll,6.06.7601.17713
WDM Streaming Tee/Splitter Devices:
Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
Video Compressors:
WMVideo8 Encoder DMO,0x00600800,1,1,wmvxencd.dll,6.01.7600.16385
WMVideo9 Encoder DMO,0x00600800,1,1,wmvencod.dll,6.01.7600.16385
MSScreen 9 encoder DMO,0x00600800,1,1,wmvsencd.dll,6.01.7600.16385
DV Video Encoder,0x00200000,0,0,qdv.dll,6.06.7601.17514
ffdshow video encoder,0x00100000,1,1,ffdshow.ax,1.01.3467.0000
MJPEG Compressor,0x00200000,0,0,quartz.dll,6.06.7601.17713
Cinepak Codec by Radius,0x00200000,1,1,qcap.dll,6.06.7601.17514
ffdshow Video Codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
Microsoft RLE,0x00200000,1,1,qcap.dll,6.06.7601.17514
Microsoft Video 1,0x00200000,1,1,qcap.dll,6.06.7601.17514
Xvid MPEG-4 Codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
Helix YV12 YUV Codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
Audio Compressors:
WM Speech Encoder DMO,0x00600800,1,1,WMSPDMOE.DLL,6.01.7600.16385
WMAudio Encoder DMO,0x00600800,1,1,WMADMOE.DLL,6.01.7600.16385
IMA ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
PCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
Microsoft ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
GSM 6.10,0x00200000,1,1,quartz.dll,6.06.7601.17713
CCITT A-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713
CCITT u-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713
AC-3 ACM Codec,0x00200000,1,1,quartz.dll,6.06.7601.17713
MPEG Layer-3,0x00200000,1,1,quartz.dll,6.06.7601.17713
PBDA CP Filters:
PBDA DTFilter,0x00600000,1,1,CPFilters.dll,6.06.7601.17528
PBDA ETFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528
PBDA PTFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528
Midi Renderers:
Default MidiOut Device,0x00800000,1,0,quartz.dll,6.06.7601.17713
Microsoft GS Wavetable Synth,0x00200000,1,0,quartz.dll,6.06.7601.17713
WDM Streaming Capture Devices:
,0x00000000,0,0,,
WDM Streaming Rendering Devices:
VMware Virtual Audio,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
BDA Network Providers:
Microsoft ATSC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft DVBC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft DVBS Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft DVBT Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
Microsoft Network Provider,0x00200000,0,1,MSNP.ax,6.06.7601.17514
Multi-Instance Capable VBI Codecs:
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514
BDA Transport Information Renderers:
BDA MPEG2 Transport Information Filter,0x00600000,2,0,psisrndr.ax,6.06.7601.17669
MPEG-2 Sections and Tables,0x00600000,1,0,Mpeg2Data.ax,6.06.7601.17514
BDA CP/CA Filters:
Decrypt/Tag,0x00600000,1,1,EncDec.dll,6.06.7601.17708
Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.7601.17708
PTFilter,0x00200000,0,0,EncDec.dll,6.06.7601.17708
XDS Codec,0x00200000,0,0,EncDec.dll,6.06.7601.17708
WDM Streaming Communication Transforms:
Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
Audio Renderers:
Remote Audio,0x00200000,1,0,quartz.dll,6.06.7601.17713
Default DirectSound Device,0x00800000,1,0,quartz.dll,6.06.7601.17713
Default WaveOut Device,0x00200000,1,0,quartz.dll,6.06.7601.17713
DirectSound: Remote Audio,0x00200000,1,0,quartz.dll,6.06.7601.17713
EVR Power Information
Current Setting: {5C67A112-A4C9-483F-B4A7-1D473BECAFDC} (Quality)
Quality Flags: 2576
Enabled:
Force throttling
Allow half deinterlace
Allow scaling
Decode Power Usage: 100
Balanced Flags: 1424
Enabled:
Force throttling
Allow batching
Force half deinterlace
Force scaling
Decode Power Usage: 50
PowerFlags: 1424
Enabled:
Force throttling
Allow batching
Force half deinterlace
Force scaling
Decode Power Usage: 0

Is this still an issue?
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Surround Mix with Logitech Z-5500 Digital

Hello,
I have a project for a 3D animation short movie, and I'll also make the score and sound effect for it, to make a DVD.
I don't have Logic Pro yet; I have Logic Express.
Is it possible to use a Logitech Z-5500 Digital set to do the surround mix with Logic Pro ? Using the optical digital out ?
I have a very limited budget, so I'm looking for the cheapest solution possible, with the best possible sound.
I'm waiting for a Mac Pro 2.66 with an ATI graphic cards (for Motion and 3D).
Thanks.
G4 1.42Ghz Mac OS X (10.4.7)

can't you pick the surround soundtrack in the control bar that is displayed close to the bottom of the movie window when you start one in iTunes? If theres no surround track, it cannot be done, furthermore, the speakers must be run from a surround home theatre receiver. Messing around with it on one of my desktops, I can choose the surround channel, but since it only has 2 built in speakers, I obviously won't get 5.1 (L/R front, center, L/R rear, and subwoofer). I agree iTunes should have preference that surround is automatically decoded when a surround track is available much like it's a preference in DVD player. I still haven't figured that one out.
Marty

HELP! Surround Mixer Proble

Hi guys, I have an SB Audigy.
Unfortunately, my installation cd was ruined and i had to get a new Hard dri've.
I have successfully installed drivers and the Creative audio console, but i cannot find anywhere the original installation files for Surround Mixer. (ie, not the stupid little updates it has on the support page)
I need help finding a full version of Surround Mixer.

http://ordorica.org/index.php?id=63
Download Audigy 4 ISO. This will install on your soundcard as well.Message Edited by the_One on 0-5-2005 08:43 AM

Audigy 2 ZS - Surround Mixer - REC setting greyed

Hi! I can't select my sound input device in the surround mixer anymore. Here is a picture:
<img alt="mixer" width="500" src="http://img95.imageshack.us/img95/09/mixeriq.jpg" height="302" title="mixer">
As you can see the slider is greyed out. My microphone works just fine, but I cannot adjust the volume anymore.
I'm using Windows XP, I recently installed Skype and TeamSpeak (checked both programs, the input settings are NOT on "automatic", so the Creative Surround Mixer should be where I adjust the input volume)
I can use the windows settings to select another recording device and adjusting the volume also works, but I want to use the creative mixer, this worked in the past and I want it back
Any ideas? Maybe I'm missing something important.

Hmm no but I reinstalled the latest driver (7 Jul 08)
http://de.europe.creative.com/support/downloads/download2.asp?MainCategory=&Product=495&dlcentric= 058&Product_Name=Audigy+2+ZS&filetype=&OSName=Wind ows+XP
Is that one bugged? Should I downgrade to the driver on the CD?

Can't run Surround Mix

Yesterday i updated SB Audigy drivers to version 6.0..36 through creative automatic updates and installed the patches for surround mixer, audioHQ and creative recorder.
Everything work fine except for surround mixer which doesn't want start.
I've italian version so the english tranlsation should be similar to this:
"An error occurred during the initialization of one of the mixer modules. Mixer will be closed."
Is there a solution to make Surround Mixer working again, or it is a well known problem?
Thanks

Good afternoon. I see that this thread hasn't got a response, but yesterday I updated drivers for my Soundblaster Audigy Platinum and encountered this same problem.
The surround mixer has stopped working and I get this error message:
"An error has occured while initializing one of the mixer engine. Mixer will now exit."
(The poor grammar is part of the error message, not my own.)
This prohibits me from controlling the volumes of the various inputs to the Audigy, and most importantly, from adjusting the individual input properties in the custom environments.
Any assistance would be appreciated.
Brian

Surround Mixer and AudioHQ on Windows

Hello,
My computer has a Sound Blaster Li've! card.
Before, Windows ME was installed, but I have now Windows XP.
The Surround Mixer and AudioHQ cannot be installed on Windows XP.
But I would like to use them. I have checked with no success for updated in Creative Labs download site:
http://us.creative.com/support/downloads/
How can I install the Surround Mixer AudioHQ in Windows XP?
Thanks,
Michael

Found it there!
http://www.techspot.com/drivers/inde...nformation/304
thanks anyway,
Michael

IPod is not displaying in iTunes or Windows; updater cannot initialize it

I have looked through ALL the relevant tutorials/manuals on my 2GB black, iPod nano, and they have not helped. The updater cannot initialize or even find my iPod, and an occassional autosearch window pops up. Please help.

It´s really sad that the following info is not posted on Apple´s support sites:
http://discussions.apple.com/thread.jspa?threadID=451219&tstart=15
My iPod had the same problem and reformatting it in Windows Explorer (NO Quickformat!) fixed it. After this (took some time) the iPod Updater recognized the iPod again and I could restore the firmware. From then on I had no problems.
Apple: Please add this information to your official support pages since too many people have that problem.

Can't start FM 9 on Windows 7: "cannot initialize dictionaries"

I am trying to move a copy of FM 9 from an old laptop to a new one running Windows 7 Enterprise. My IT guy reinstalled the software from CD and applied my license key. When I try to start FM, it gives this error during the "Core" startup: "FrameMaker cannot initialize its dictionaries. Either the LanguageDir entry specified in the initialization file is missing or incorrect, or the files in the LanguageDir are missing or corrupted."
I still have the old laptop, so I can compare and copy the files and directories directly. As far as I can see, the LanguageDir entry in the maker.ini is identical on both machines. Both have a dict folder, and I see the same number of files in both. Just for good measure I copied the old folder's contents across to the new folder, but that didn't help.

Very good that you found the cause. I remember now that it was recommended to copy the installation files to your hard disk. See the FrameMaker online help:
http://helpx.adobe.com/framemaker/kb/troubleshoot-installation-problems-framemaker-9.html
http://helpx.adobe.com/framemaker/kb/troubleshoot-errors-or-freezes-installation.html

How do I get my old Surround Mixer recording sources back?

I recently had my computer repaired where I basically had a complete overhaul. In the process they installed a second soundcard (the one that went with the new motherboard) alongside my original Creative Sound Blaster Audigy card (Sound Blaster Audigy Platinum eX). Before, when I would record audio into my computer, I opened the Surround Mixer software and in the record pulldown menu it showed all of the inputs as they relate to my Audigy interface (SPDIF, Aux In 2, Line In 2, etc.). Now when I open the Surround Mixer software, I only get generic options such as Analog Mix, CD Digital, Microphone, etc. and therefore I can't get any outside audio into my computer.
I figured the computer?was defaulting to the?new sound card so I disabled the onboard audio in my BIOS and then installed the Creative Sound Blaster Series 2 Driver. I clicked on the driver and it said that it needed to uninstall another driver that was already there. The install went a little funny and it got hung up a couple of times. Then, I couldn't get Surround Mixer to work at all so I went to the Creative website and installed Software Auto Update. I downloaded and installed all the critical components?but that also went a little funny. It took about three tries and it didn't seem like it actually finished installing, but when I checked on Auto Update again, it said that I was up to date and that everything had installed. I noticed at the beginning that it installed a new version of Surround Mixer but when I opened it later, it still had those same generic options, not the the ones that match my external interface.
What do I need to do to get my original settings back?
Message Edited by audiodrome on 04-30-2009 06:46 PMMessage Edited by audiodrome on 04-30-2009 07:32 [email protected]

>Re: How do I get my old Surround Mixer recording sources back?p audiodrome,
Is the external Audigy Dri've properly connected? Does the Plat Ex have the rear jacks? If so, can you record from the rear LineIn or mic jack and play sound files through headphones or speakers? What happens when you run the Creative Diagnostic? What does Device Manager show? Otherwise, yes, uninstall and reinstall the Creative software. If your install CD has a repair option, try that first. However, you may find you need to remove the Audigy from your PC, reboot without it, and then reinstall everything. Some Soundblaster cards don't play well with some integrated soundcards, so you may also want to disable the integrated soundcard in BIOS.
Message Edited by Katman on 05-04-2009 :00 AM

Photoshop CC2014 does not launch. Error message ' cannot initialize photoshop because of program error

Hi, I get this error message (cannot initialize) after the splash screen.
I have chatted with Adobe staff and spoke to one. I have un-installed and re-installed, created new administrator and installed, fixed permissions, deleted preferences, you name it.
In previous chat on a forum I read about the PsErrorLog.txt file.
Mine says:
2014:08:23 10:50:20 : /Volumes/workarea/PS_15_Mac_Daily_Retail/20140730.r.148/photoshop/main/photoshop/sources/ UColorState.cpp : 737 : REQUIRE failed
2014:08:23 10:54:42 : /Volumes/workarea/PS_15_Mac_Daily_Retail/20140730.r.148/photoshop/main/photoshop/sources/ UColorState.cpp : 737 : REQUIRE failed
I cannot locate the ColorSettings.csf in the photoshop preferences folder and my System Preferences / displays / color says iMac.
Any tips how to solve this issue?

Either your default color settings files are corrupted, or they are missing (they're in the system application support folder).
Uninstalling and reinstalling should put the default files back in place.

Error: Cannot initialize application data. when trying to start JSPM

Hi All
I get the an error when trying to open the D:\usr\sap\SLM\DVEBMGS00\j2ee\JSPM\go.bat on Windows 2003. I am trying to run the JSPM. Could find much info about the exact problem. Please advice.
Trouble Ticket Report
Java Support Package Manager for SAP NetWeaver'04s
SID................: SLM
Hostname...........: gpisolides
Install directory..: D:/usr/sap/SLM
Database...........: Oracle
Operating System...: $(/J2EE/StandardSystem/CentralInstance/J2EEEngineInstanceHost/OpSysType)
JDK version........: 1.4.2_16 Sun Microsystems Inc.
JSPM version.......: 7.00.12.0.1.7.21
System release.....: 700
ABAP stack present.: true
The execution ended in error.
Cannot initialize application data.
Could not extract value with key SAPSYSTEM from file D:/usr/sap/SLM/SYS/profile/SLM_DVEBMGS00_gpisolides. A possible reason could be that the path to the directory containing the sappfpar executable is not included in the PATH environment variable. Could not start process sappfpar. Error while executing process sappfpar.java.io.IOException: CreateProcess: sappfpar pf=D:/usr/sap/SLM/SYS/profile/SLM_DVEBMGS00_gpisolides SAPSYSTEM error=2
More information can be found in the log file D:\usr\sap\SLM\DVEBMGS00\j2ee\JSPM\log\log_2008_08_05_15_22_30\JSPM_MAIN_1_01.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.jspm.phases.PhaseTypeJSPM
com.sap.sdt.jspm.gui.JspmUiException
Cannot initialize application data.
JSPM_MAIN
JSPMPhases
NetWeaver Upgrade
SAPJup
Java Upgrade
Thanks
Krishna KK

Can you execute this command manually when you login as "slmadm":
sappfpar pf=D:/usr/sap/SLM/SYS/profile/SLM_DVEBMGS00_gpisolides SAPSYSTEM
Markus

Live!Surround speaker setting not showing in surround mixer for SB Live Platinum

the Li've!Surround option for speaker settings in not showing in my Surround Mixer
i have:
Windows 2000 sp4
SB Li've! Platinum 5.
ASUS CUSL2
Sound Blaster Li've! - Li'veDrvUni-Pack (English) SBLW-XPWEB-W4-US 28-Feb-03
Installed the speaker preset for li've!surround but the only headphone, 2 speaker, 4 speaker, and 5. speaker shows up on speaker configuration of the Surround Mixer
i've played the AC3 files on the cdrom and Dolby pro logic surround, I get sound from all fi've speakers on my Denon D-850 w/ Dolby surround pro-logic
I can't use the surround mixer to test all the speakers, only front left and right speakers work on the test, i have to open to wav files directly to test the center speaker, the rear speaker test doesn't work from the wav file
My Denon system only has analog stereo inputs, so this is my only option for letting Sound Blaster know I have 5 speakers.
I've uninstalled all SB Li've software and drivers from the unipack, and reinstalled the orignal drivers and apps from the CD-ROM SBP5-CDSD-W-US MID : 32680 5-Sep-2000 and the Li've!Surround speaker setting reappears in the Surround Mixer.
Is the Li've!Surround setting no longer available in the new Surround Mixer in Li'veDrvUni-Pack (English) SBLW-XPWEB-W4-US 28-Feb-03 ?
Message Edited by klin on <SPAN class=date_text>2-2-2004 <SPAN class=time_text>06:4 AM
Message Edited by klin on 2-2-2004 2:45 PM

so I found this post...
http://groups-beta.google.com/group/...7?dmode=source
it seems Li've Surround is no longer supported in the new drivers
....so what would be the best setting to play ac3 files or DVD's through my receiver with only 2 analog inputs (left and right) available w/ Dolby surround prologic. Should I set it to 2 speaker or 4 speaker setting in the Surround Mixer in order to send the best signal to the prologic decoder on my receiver with 5 speakers (2 front, center, 2 rear)

"cannot initialize surround mixer" er

Similar Messages

Maybe you are looking for