Cannot "insert link from km" in WPC
Hi. We have EP 7.0 SPS21 implemented. I am experiencing issues with WPC, in that I am now not able to "insert link from km" when in edit mode inside a paragraph or Advanced paragraph. I goto the path of the .PDF file in KM & select it, but the link is not created. This is now happening after we implemented SPS21.
Please advise.
Kind Regards,
M.
Good Morning Aliaksandr. Thank-you for your prompt response. See below for the versions of the components. Plse advise...
sap.com CORE-TOOLS 7.00 SP21 (1000.7.00.21.0.20091214120657) SAP AG SAP AG 20100220101007
sap.com EP-PSERV 7.00 SP21 (1000.7.00.21.0.20100122081155) SAP AG SAP AG 20100220110545
sap.com EP-WDC 7.00 SP21 (1000.7.00.21.0.20091214203918) SAP AG SAP AG 20100220110619
sap.com EPBC 7.00 SP21 (1000.7.00.21.0.20091214203545) SAP AG SAP AG 20100220102617
sap.com EPBC2 7.00 SP21 (1000.7.00.21.0.20091214203611) SAP AG SAP AG 20100220110621
sap.com FORUMS 7.00 SP21 (1000.7.00.21.0.20091214174900) SAP AG SAP AG 20100220110816
sap.com JLOGVIEW 7.00 SP21 (1000.7.00.21.0.20091214103400) SAP AG SAP AG 20100220101027
sap.com JSPM 7.00 SP21 (1000.7.00.21.0.20100120140600) SAP AG SAP AG 20100220084503
sap.com KM-KW_JIKS 7.00 SP21 (1000.7.00.21.0.20091214120914) SAP AG SAP AG 20100220102636
sap.com KMC-BC 7.00 SP21 (1000.7.00.21.0.20091214203935) SAP AG SAP AG 20100220110821
sap.com KMC-CM 7.00 SP21 (1000.7.00.21.0.20100122081448) SAP AG SAP AG 20100220110827
sap.com KMC-COLL 7.00 SP21 (1000.7.00.21.0.20091214204159) SAP AG SAP AG 20100220110847
sap.com KMC-UI 7.00 SP21 (1000.7.00.21.0.20091214174900) SAP AG SAP AG 20100220105719
sap.com KMC-WPC 7.00 SP21 (1000.7.00.21.0.20091214174600) SAP AG SAP AG 20100220110850
sap.com LM-PORTAL 7.00 SP21 (1000.7.00.21.0.20100118101206) SAP AG MAIN_APL70P21_C 20100220110853
sap.com LM-TOOLS 7.00 SP21 (1000.7.00.21.0.20100118110644) SAP AG MAIN_APL70P21_C 20100220104212
sap.com NET-PDK 7.00 SP21 (1000.7.00.21.0.20091214151400) SAP AG SAP AG 20100220105741
sap.com RTC 7.00 SP21 (1000.7.00.21.0.20091214194600) SAP AG SAP AG 20100220105746
sap.com RTC-STREAM 7.00 SP21 (1000.7.00.21.0.20091214194600) SAP AG SAP AG 20100220110858
sap.com SAP-EU 7.00 SP21 (1000.7.00.21.0.20100118101502) SAP AG MAIN_APL70P21_C 20100220111419
sap.com SAP-JEE 7.00 SP21 (1000.7.00.21.0.20091214121301) SAP AG SAP AG 20100220101108
sap.com SAP-JEECOR 7.00 SP21 (1000.7.00.21.0.20091214121410) SAP AG SAP AG 20100220101344
sap.com SAP_JTECHF 7.00 SP21 (1000.7.00.21.0.20091214121505) SAP AG SAP AG 20100220101432
sap.com SAP_JTECHS 7.00 SP21 (1000.7.00.21.0.20091214121635) SAP AG SAP AG 20100220103234
Kind regards,
Melvin
Similar Messages
-
Sharepoint 2010 add/edit form: Insert link from sharepoint disabled
Hello!
I have a list with enhanced rich textbox field. I can click on Insert link, "from addres" is enabled, but "from Sharepoint" is disabled.
Is there a reason why is this button disabled? Field is enhanced rich textbox... Paste button is also disabled.
ThanksMicrosoft says
it is an issue but you can check
design this strange behavior on other occasions:
If we have a Web page in the root
of the site and insert a Web Part content "from SharePoint" will
disabled, but if this same Web Part Page
is in a library "from SharePoint"
is enabled What is the difference? I do not know.
Worse. If we insert the Web Part
to a page in the root of the site is
a list or library that has a link produced by a
workflow, an error as seen in
http://www.danielroot.info/2010_07_01_archive.html
But the link works correctly if the
page is within a library.
Are these design issues also?
Sorry for my English.
Soy Miguel de Torre Arias -
Hi Experts,
When I send any document by clicking 'send to' command, I am not getting HTML Editor function
'Insert Link From Km' though the options are selected in the HTML Editor.
Is this a correct functionality?
Regards,
Atul BhatiaHi,
When you use 'send to' for a document in KM a HTML editor window with send email opens up.
it contains a html editor with a link displaying the document you want to send. In addition you can also upload and attach a file.
If this does not appear check your KM configuration.
Regards,
Melwyn -
Cannot insert data from local database into remote database using subquery
I have two oracle databases on different host.
One is version 8i in Host A and the other is 9i in Host B.
First, I try to create a dblink in 8i to 9i, but it fail.
Then, I create a dblink in 9i to 8i, it success.
I have already tried some select statement in 9i to view the table in 8i, which is success and that means the dblink is really work.
The sql statement is like
Select * from table1@hostA
Then I have tried running some INSERT statement in 9i, which is copy data from table 1 in 8i to table 2 in 8i, both tables are in 8i. The sql statement is like
Insert INTO table2@hostA(field1, field2)
select field1, field2
from table1@hostA
This also success.
Also, I have tried to use the following INSERT statement
Insert INTO table2@hostA(field1, field2) values ('XXX', 'XXX)
This also success.
However, when I try to insert data from table in 9i to table in 8i using the following INSERT statement, it failed.
Insert INTO table2@hostA(field1, field2)
select field1, field2
from table1
The statement can execute, but all the rows inserted with every field value equal to NULL. I have tried to run the select part, it can return the data. But when I run the INSERT statement above, the value inserted into table2 is all equal to NULL.
One more thing, I discover that the databases are using different NLS_CHARACTERSET
9i is AL32UTF8
8i is WE8ISO8859P1
Is this relevant to my problem?
Does anyone know the solution about this problem?
Thanks!!How is the best way to do this ?How much are you planning to send?
You can use COPY command. Ensure that you have valid database link between two databases.
Available options are:
create - creates a new table. errors out if the destination table exists.
replace - drop the destination table and re-creates with data.
insert - inserts data if the destination table exists.
append– appends data into an existing table.
use set arraysize 5000 -The arraysize specifies the number of rows that SQL*Plus will retrieve from the database at one time.
copy from scott/tiger@ORCL to scott/tiger@ORCL92 create new_emp using select * from emp; -
Can not send links from File send or emails from sites with options to email
go to '''TOOLS '''then '''OPTIONS''' then '''ADVANCED''' then '''NETWORK tab''' then '''SETTINGS tab''' and select the options '''NO PROXY''' click '''OK''' and '''OK '''again in the next screen. With that you have disabled the proxy settings.
''if you like to not disable the proxy settings choose'' : '''Auto-detect proxy settings for this network''' (it is in the same session)
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
I cannot open links from my Yahoo or Google email accounts
When I try to open links from my Yahoo! e-mail or even Google mail, the links will not open. I get a message saying "Safari can't open the page". This happens repeatedly! Any other websites open are fine and working.
I know this is another subject, so you don't have o answer if you don't want to. Can you tell me where the Screen Caption button is or how I can take a screen pic?
Thank you for your assistance.
Penny GarzaRight click on a PSD file and select "Open with...". In the following dialog, select Photoshop Elements and keep the checkbox to use that as the default on.
-
I downloaded the new operating system to my iPad 4 and am having issues accessing links from my email, when I click on the link nothing happens. I noticed this problem yesterday
I appreciate all the help received and I have tried the suggestions and experimented further on my own as well. Here is some additional information about the problem.
I could remove the SD from my phone and open the pictures just fine with my MacBook/Preview. Furthermore, I noticed that the problem only happens when I mail my pics to my comcast.net email account. If I mail the pics to my yahoo.com email, my MacBook has no problem opening up the pics with Preview. Same success if I mail the pics to my GF email at io.com. So, by process of elimination, the problem may be with the way comcast.net handles my pics as email attachments.
I remain puzzled why..... -
Cannot Open Links from Mail / SMS
I upgraded my C7 to Belle now. Bad news: When I receive a mail or SMS that contains a link to a web page, I cannot open it. What happens is:
I first get a notification sying 'Loading'. Then, one or two seconds later, it says 'Loading failed. Please try again later'
I am not 100% sure if this started with Belle. I installed quite a few application after I upgraded to Belle, so maybe it's one of those that causes the problem.
What I did, of course, was to check
Application Settings > Default Applications > Browsing internet
That's set to 'Internet', which I believe is what it should be. (I also tried to reset everything there, still nothing.)
I really, really, really wouldn't want to wipe the whole phone, re-install belle, re-install all of the applications...
Is there a way to check what really gows wrong and fix it?Can you connect to internet from native browser or other 3rd party browsers like opera?
In Love With My C6-01:Now running on Nokia Belle! -
PL/SQL 10g - Cannot Insert Values from PL/SQL
Hi People,
BACKGROUND (if required):
I'm trying to write a message threading algorithm for uni, I believe it works so far, it's just matching the subjects at the moment I want to expand it to include email addresses but that will be at a later date.
A brief run down, at the moment, a user can generate a list of email addresses to filter the corpus with, these are then inserted (via Java) into the table Sender. These addresses are then used in an IF statement, however they are only used if the table sender is populated. The messges that are identified as threads have their Message ID inserted into another table but they also have their values printed to the DBMS output.
QUESTION:
What I need help with is although the values print out to the DBMS Output after a great deal of time, normally after the DBMS buffer has maxed out (thus the statement ends in error). The values printed are not inserted into the table.
Any help on solving this or optimising if would be greatly appreciated, I'm new to PL/SQL i'm afraid so it's probably a really messy statement.
If this is a badly worded question and I need to supply more information then I gladly will, however i'm not 100% on what information is relevant at the moment.
Below is the statement in question.
Thanks and Regards,
K
LOOP
IF sender_cur1%FOUND THEN
IF sub_One = Sub_two and sub_One_MID != sub_Two_MID and Sub_One_Sender = send_user_cur THEN
INSERT INTO MATCHING_SUB (MID) VALUES (sub_Two_MID);
dbms_output.put_line('MID is: ' || sub_Two_MID);
END IF;
ELSE
IF sub_One = Sub_two and sub_One_MID != sub_Two_MID THEN
INSERT INTO MATCHING_SUB (MID) VALUES (sub_Two_MID);
dbms_output.put_line('MID is: ' || sub_Two_MID);
END IF;
END IF;
Edited by: user8967525 on 01-Mar-2010 07:27
Edited by: user8967525 on 01-Mar-2010 08:08cd,
I will most certainly try.
I have a table of emails that I am attempting to thread by means of comparing the subjects together (for now). However ultimately I want to be able to bring in the recipients as well. However this can be ignored for now.
The main variables from the Messages table are:
MID(number) - 0 - 245000
SENDER(VARCHAR) - Email Address
SUBJECT_CLN6 - VARCAHR - Cleaned email subject.
I am creating two instancs of a cursor that contains the subjects and MID's from Messages. I am then looping through cur1 comparing the value against all values in cur2, this continues until all values in cur1 have been compared against cur2. I use the MID to ensure that I am not comparing the same Message. Furthermore I am also filtering the Emails by Sender (if the table has been populated by the user, via a java applet, otherwise if just uses the subject). The variable Send_User_Cur takes takes its values from the Table called Sender, whilst sub_one_sender takes its values from the column Sender in Messages.
The proposed output of this at the moment is to just have the MID's (and later all the relevant columns, however just for now MID) of all the threaded emails, inserted into the table MATCH_THREAD, such that they can be called upon later for further processing and most likely called from a java applet at some point as well.
I've pasted the entire code below. I understand that it looks a bit messy on the preview and for that I apologise.
Thanks all!
Kev
DECLARE
CURSOR sub_cur1 IS
SELECT MID, Sender, trim(subject_cln6) from MESSAGES;
sub_One MESSAGES.subject_cln6%TYPE;
sub_One_MID MESSAGES.MID%type;
sub_One_Sender MESSAGES.SENDER%type;
CURSOR sub_cur2 IS
SELECT MID, trim(subject_cln6) from Messages;
sub_Two MESSAGES.subject_cln6%TYPE;
sub_Two_MID MESSAGES.MID%type;
CURSOR sender_cur1 IS
SELECT SENDER_ID FROM SENDER;
Send_User_Cur SENDER.SENDER_ID%type;
counter number := 0;
MID_t MESSAGES.MID%TYPE;
i number := 0;
j number := 0;
BEGIN
SELECT count(subject) INTO counter
FROM MESSAGES;
OPEN sub_cur1;
OPEN sub_cur2;
OPEN sender_cur1;
FETCH sub_cur1 INTO sub_One_MID, Sub_One_Sender, Sub_One;
FETCH sender_cur1 INTO Send_User_Cur;
WHILE sub_cur1%FOUND
LOOP
IF sub_cur2%ISOPEN THEN
FETCH sub_cur2 INTO sub_Two_MID, SUB_Two;
dbms_output.put_line('OPEN');
ELSE
OPEN sub_cur2;
FETCH sub_cur2 INTO sub_Two_MID, SUB_Two;
--dbms_output.put_line('OPENED and FETCHED');
END IF;
LOOP
IF sender_cur1%FOUND THEN
IF sub_One = Sub_two and sub_One_MID != sub_Two_MID and Sub_One_Sender = send_user_cur THEN
INSERT INTO MATCH_THREAD (MID) VALUES (sub_Two_MID);
commit;
END IF;
ELSE
IF sub_One = Sub_two and sub_One_MID != sub_Two_MID THEN
INSERT INTO MATCH_THREAD (MID) VALUES (sub_Two_MID);
commit;
END IF;
END IF;
FETCH sub_cur2 INTO sub_Two_MID, SUB_Two;
i := i + 1;
EXIT WHEN i = counter;
END LOOP;
CLOSE sub_cur2;
FETCH sub_cur1 INTO sub_One_MID, Sub_One_Sender, SUB_One;
i := 0;
dbms_output.put_line('sub_One_MID: ' || sub_one_mid);
END LOOP;
CLOSE sub_cur1;
CLOSE sub_cur2;
END; -
Firefox will not ''start'' and open a website from a Thunderbird email link. A link from Thunderbird will open once Firefox is ''already'' started, but will not initially start Firefox and proceed to open the Thunderbird email link.
I also have this problem. I cannot open links from a discussion board I frequent nor can I open links from my email. Also after opening my email, I cannot go to any other sites except my home page. I can then go no where else.
When I close Firefox and try to reopen it, it does nothing! I have to bring up the Task Manager and end the Firefox process before I can get back in.
To the best of my knowledge, this problem started with the new update to Ver. 3.6.9. I am running Windows XP Media Center 2005 -
It worked perfectly in prior versions, but now in this version 31.0, when I try to paste a saved URL as a link into highlighted text, it returns this error message: "(No named anchors or headings in this page)", and refuses to accept a paste. Note that this is broken both when clicking on the little blue screen icon as well as when selecting "insert/link" from the function bar. I've looked everywhere for some sort of new configuration option to correct this, but to no avail. What am I missing?
No, that's not the issue. I am writing simple text in an outgoing message, then highlighting a few words (such as "click here to visit the site"), then when I use any of the three methods to assign a link to those highlighted words (Ctrl L, insert/link, or clicking on the little blue screen icon), the normal window opens with a box to insert the URL, but when I try to PASTE such a saved URL into that box, the aforementioned error message appears. Note that I can manually TYPE a URL into that box with no problem, but version 31 will not allow me to PASTE one. I've always successfully used exactly that procedure with prior versions.
Note also that when I insert an image into an outgoing message and try to paste a link to it in the same way, the same error message pops up. That also always worked in prior versions.
Because e-mail is crucial to me, I have now re-installed a prior version (24.6.0) of Thunderbird in which this function works perfectly, so for now, problem solved. But I hope you can fix this so I can use future versions.
BTW ... I'm using Windows 7 Professional on a PC running an Intel 64-bit 7 core processor. -
Cannot open PDFs from a link in another PDF
Hello, I am having a strange issue on some of my users' adobe readers. (2 users on windows 8.1 PCs)
I have created an "app choser" (see below image) which is basically an "easy one page choser" for the different "fillable forms" I have created which has been working perfectly up until this week. Basically there is 12 buttons and when the user presses one of these buttons, the chosen fillable form / app opens which they can then fill in and send on as required.
However the 2 users that are having problems, cannot open the forms at all. They click on the button but nothing at all is happening. Adobe reader is just not registering that there are links at all.
The "app choser" works on all my users PC's except 2, so I know its not a location error or to do with updates etc.. Does anyone have any clues or ideas.
I have already tried going into preferences - trust manager - internet access from PDF - change settings - Allow PDF files to access websites...... but this made no difference at all.
thanks
Saradoesnt matter i've fixed it. if anyone else is having the same issue then I fixed it by doing the below:
Edit - preferences- Security enhanced -
unclick "enable protected mode at startup" - restart adobe reader
bizarrely i've not had to unclick this on any of my other users PC's (on both windows 7 & 8.1), but was necessary for some reason on the ones having trouble with opening PDF links from the "app chooser PDF". -
FRM-10242: Cannot call linked-in Forms from Form Builder. error
FRM-10242: Cannot call linked-in Forms from Form Builder.
Cause: The menu designer specified a call to linked-in Forms from within Form Builder.
Action: Notify your DBA.
does anyone know why this happens.
I have this main-menu.. and when i click on one of the submenus which should call the form....i get this error.Same issue here... Been trying to get this working since a week now. I tried all the solutions like memory heap and all but no luck.
One thing that I would like to know is that, in some threads the resolution was to recompile the INS_FORMS.MK file under /forms/lib32 but with my installation I don't have that "lib32" folder under /forms/ and I can not even find that file anywhere in my entire installation.
I am using 12.1.1 on Windows Server 2008.
Any help or guidelines is greatly appreciated.
Santhosh. -
I cannot find the Kindle reader app for iPad and when I click on the link from Amazon there is an error on iTunes
Are you in the US? Not all apps are available in all countries. There is no way to download anything from a website, like Kindle. If it's not in your App Store, you won't be able to have it.
-
I Cannot bu anything from App Store help ,and change payment
Accepted forms of payment > http://support.apple.com/kb/HT5552
Changing Payment Information > http://support.apple.com/kb/HT1918
If necessary... Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Maybe you are looking for
-
My iTunes Store on iPhone comes up with an error [newNullResponse] always when I click the music tab. The movies and tv shows tab works fine. I have tried everything from restarting my phone to turning my account off and on.
-
Getting error in log after sending https requiest to weblogic server.
Hi, I am using weblogic 10.3 in production have three manage server in a single cluster, all the request at coming to the manage server from RADWARE WST load balancer, previously i am using appxcel device from radware for ssl encryption / decryption,
-
My iphone was glitching and suddenly it turns off? what do i do?
hello. i recently turned on my iphone and it started to glitch out, being really slow and i turned it off to see if maybe it would cool down and when i when to go turn i back on the back light is on but no visual? and ive tried resetting it.. what do
-
Having trouble installing j2re-1_4_06-windows-i586
Hello! I recently built a computer and am trying to install Java 2 Runtime Environment on it. The computer has WinXP, SP2 on it. I downloaded j2re-1_4_06-windows-i586 from Java.com and began to install it. Towards the end of the installation process,
-
Way to detect that Submit didn't finish ?
I have a form that uses the "hidden submit button" technique. Whereas, the visible Submit button is a regular button that performs some addt'l validation before exec'ing the click event on a real, hidden submit button. What I would like to do is to d