Cannot insert Widget in DW CS5

I have downloaded and customized several Widgets from the Widget Browser. When I open a page within my site, I go to Insert ->
Widget and nothing happens. Also, when I go to the "Insert" group, select "Common" and click Widget, still nothing. Does anyone have any thoughts on this problem? On the inset menu, there is no option to expand the menu item. Any help would be appreciated!
Thanks,
Tim

David, thank you for the reply, however, the problem I am having is not with customizing a "Spry Menu Bar. I have customized and saved various widgets to my presets, but cannot insert them the way that I believe it was intended to work. You see, everything that I have read, and all videos I have watched show people clicking on a blank area on their webpage, and clicking on Insert -> Widget. It is at that pont that they are prompted as to which widget they intend to insert. As you will see on the attached image, it says you can insert the widget by performing the task as I mentioned or by going to the Browser Lab side dock, and clicking on "Common" and then on Widget. Saving the presets to seperate files is quite a but different than what I am trying to do, and how it is described, or as seen here http://www.youtube.com/watch?v=5P91PPCw2Bs. Please see attached, and again, thanks for your help!
-Tim

Similar Messages

Widget insertion not working DW CS5 Mac

I've got a template open and am trying to insert the JBuilder Accordian widget. I've done all the necessary processes to download the widget from Adobe and put it into my "My Widgets" in the browser. I click on Insert / Widget and get nothing, no dialog asking for which widget to insert. This also fails from the Insert panel and clicking on the Widget icon.
Is this a bug or am I doing something wrong?
Thanks,
Steve

Maybe it would help if I re-asked the question in different terms:
a) Does DW5 on MacOS monitor the user interface for a "cancel current operation" input? If so, what is it?
b) Is there any alternative to "Force Quit" to cancel a "long" operation?
Note 1: Monitoring the UI is problematic because it slows down the application; how much depends on how often. Depending on the app's internal architecture, it may simply not be possible to stop certain operations cleanly. Both these would be reasonable motivations to omit a UI cancel function.
Note 2: I think MacOS "Force Quit" sends a Unix "kill" signal (SIGKILL) which stops a running process in its tracks. The process disappears, and unsaved changes are lost. I think Unix defines milder signals, signifying something like, "please stop what you are doing", but I have no idea if these are effective in the case of DW.

Insert widget in webpage div

I started using Adobe Widget Browser two days ago. I installed the program and browsed the widgets/applications. I downloaded one called Spry Menu Bar 2.0
opened it and used it to edit a menu bar. i saved it. I wasn't sure how to get it into Dreamweaver. I am using Dreamweaver CS4.
Scott gave me the following directions which worked beautifully. However please read on after his instructions for my next question. I know I might seem a bit dull, but truth is I'm very new to the whole Adobe package and feel lost at times.
CS5 added the ability to insert Widgets from the Widget Browser so you need CS5 to get that functionality. If you don't have CS5 yet you can still use Widget Browser to insert the Widgets in a new page in your site. Just add the widget you want to "My Widgets" then click the "Save Widget Files" button after adding the widgets to "My Widgets" then give it a name of an html file to create in your site. The Widget Browser will create a sample html file with the links to any external javascript and css files which it will save relative to the html file.
-Scott
Thank you so much, that is helpful. I actually own the CS5 upgrade but haven't installed it yet because the learning curve is so steep for me, I thought it might be better to learn CS4 first and then move to CS5.
So after saving the html widget file to my website, how do I actually install it in an existing page?
for example I made a verticle menu widget with fly out sub-menu that I want to use for navigation. I want to install that menu in a div I have defined as "nav_container". How do I insert the menu into my container?
Thanks in advance

Now might be a good time to upgrade to CS5, especially since you have it! With CS5 it will be easy to insert the Widget into your navigation div. Just open your page position your insertion point in your nav_container <div> and select Insert, Widget.
If you really don't want to upgrade your alternative is to copy and paste the code from the test page. But you will need to make sure that all of the code blocks, Javscript, CSS, and the links to the external .js and .css file in the head are inserted in the new document and that the url's are mapped correctly. If you save the HTML Widget page at the same location as your existing html page the files will all be saved relative to that file, but using CS5 will be easier.
-Scott Richards
Dreamewaver Team

FRM-40602: Cannot insert into or update data in a view

Hi all!
I have a form based on a view and I want to get rid off this message.
I set the properties blocks query only but it still doesn't work.
Does someone met with this situation?
Many thanks!

Hello
I've just been messing about with a similar problem. Basically, I have a view that involves a join across two tables, I have a data block in my form that's based on the view, and I've written an INSTEAD OF trigger to insert/update/delete from the two tables.
I was getting the error message 'Cannot insert or update data in a view', and it turned out that the error was happening because the join column between the two tables was the primary key on one of the tables, but the corresponding column on the join table had no unique key on it. This meant that Oracle couldn't establish a one-to-one relationship between rows in the view and rows in the underlying tables. The column on the join table was in fact unique on that table, and adding a unique constraint on that column in the database cured the problem.
Hope that's of use.
regards
Andrew
UK

SharePoint List Form using InfoPath 2010 "Cannot insert the value NULL into column 'tp_DocId', table 'Content_SP_00003.dbo.AllUserData'; column does not allow nulls"

I am experiencing issue with my SharePoint site , when I am trying to add new Item in List . Error given below :--> 02/03/2015 08:23:36.13 w3wp.exe (0x2E04) 0x07E8 SharePoint Server Logging Correlation Data 9gc5 Verbose Thread change; resetting trace
level override to 0; resetting correlation to e2e9cddc-cf35-4bf8-b4f3-021dc91642da c66c2c17-faaf-4ff9-a414-303aa4b4726b e2e9cddc-cf35-4bf8-b4f3-021dc91642da 02/03/2015 08:23:36.13 w3wp.exe (0x2E04) 0x07E8 Document Management Server Document Management 52od
Medium MetadataNavigationContext Page_InitComplete: No XsltListViewWebPart was found on this page[/sites/00003/Lists/PM%20Project%20Status/NewForm.aspx?RootFolder=&IsDlg=1]. Hiding key filters and downgrading tree functionality to legacy ListViewWebPart(v3)
level for this list. e2e9cddc-cf35-4bf8-b4f3-021dc91642da 02/03/2015 08:23:36.17 w3wp.exe (0x1B94) 0x1A0C SharePoint Server Logging Correlation Data 77a3 Verbose Starting correlation. b4d14aec-5bd4-4fb1-b1e3-589ba337b111 02/03/2015 08:23:36.17 w3wp.exe (0x1B94)
0x1A0C SharePoint Server Logging Correlation Data 77a3 Verbose Ending correlation. b4d14aec-5bd4-4fb1-b1e3-589ba337b111 02/03/2015 08:23:36.31 w3wp.exe (0x2E04) 0x07E8 SharePoint Foundation Database 880i High System.Data.SqlClient.SqlException: Cannot insert
the value NULL into column 'tp_DocId', table 'Content_SP_00003.dbo.AllUserData'; column does not allow nulls. INSERT fails. The statement has been terminated. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject
stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavi... e2e9cddc-cf35-4bf8-b4f3-021dc91642da 02/03/2015
08:23:36.31* w3wp.exe (0x2E04) 0x07E8 SharePoint Foundation Database 880i High ...or runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream,
Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior,
RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior) at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand
command, CommandBehavior behavior,

Are you trying to setup P2P? Could you explain the process you followed completely? By anychance you create the backup and then created the publication?
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

ORA-01400: cannot insert NULL into

hi to all
when i try to insert into a table i get an error message like
ORA-01400: cannot insert NULL into
but if i see in the session status i see that the value of the element that will be inserted on the column is not null
and i haven't make mistakes on my insert query so how can it be possible
can you help me please

What is the source used and the source type of your columns having trouble? Is it all not nullable columns on a table that are having problems? Are other columns inserting fine?
Can you post up on apex.oracle.com your app?
Do you want to send me your app and I can install it and look at the page in question?

Error when cloning a AD connector (cannot insert NULL into ("OIMUSER"."OIU"

I am getting below error when trying to clone AD connector (new resource). I Imported/Exported AD resource Object, Process form and the dependent lookup tables.
I can see the new resource object, process definition, process forms and Recon rule, when i tried provision a the new resource i see this error in logs.
DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT], Importing ProcessAdministrator(XMLCREATED)
DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT], Object is being created
DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT], Creating data object
DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT],Creating data object with params: com.thortech.xl.dataobj.tcDataBase@14d388c,41,null,[B@9355bd
DEBUG,23 Dec 2010 02:34:45,803,[XELLERATE.DDM.IMPORT], Resolving dependency to {UserGroup=SYSTEM ADMINISTRATORS}
DEBUG,23 Dec 2010 02:34:45,803,[XELLERATE.DDM.IMPORT], Dependency resolved with key: 1
DEBUG,23 Dec 2010 02:34:45,803,[XELLERATE.DDM.IMPORT], Saving data object
INFO,23 Dec 2010 02:34:46,256,[XELLERATE.DDM.STATS],Purging 6 prepared statements
ERROR,23 Dec 2010 02:35:52,663,[XELLERATE.DATABASE],Class/Method: tcDataBase/writeStatement encounter some problems: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
java.sql.SQLIntegrityConstraintViolationException: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:85)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:947)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3462)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1349)
     at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:159)
     at com.thortech.xl.dataaccess.tcDataBase.writePreparedStatement(Unknown Source)
     at com.thortech.xl.dataobj.PreparedStatementUtil.executeUpdate(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.insertImplementation(Unknown Source)
Please let me know if you have any idea..
Thanks..
Edited by: IDMuser19 on Dec 29, 2010 2:21 PM

After Setting Database to DEBUG mode i see below errors in the log
DEBUG,27 Dec 2010 16:26:44,850,[XELLERATE.DATABASE],select ost_launch_dependent, ost_key, ost_status from ost ost, obi obi where ost.obj_key=obi.obj_key and obi.obi_key=181
INFO,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],DB read: select upp_deny_list from upp,usr where usr.usr_key=upp.usr_key and usr.usr_key=21
DEBUG,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],select upp_deny_list from upp,usr where usr.usr_key=upp.usr_key and usr.usr_key=21
INFO,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],DB read: select pol_key, obi.obj_key from rqo,obi where rqo.obi_key = obi.obi_key and obi.obi_key = 181
DEBUG,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],select pol_key, obi.obj_key from rqo,obi where rqo.obi_key = obi.obi_key and obi.obi_key = 181
INFO,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],DB read: select evt.evt_key, evt.evt_name, evt.evt_package from dob dob, evt evt, dvt dvt where dob.dob_key=dvt.dob_key and dvt.evt_key=evt.evt_key and (dob.dob_name='com.thortech.xl.dataobj.tcOIU' or dob.dob_name='com.thortech.xl.dataobj.tcTableDataObj' or dob.dob_name='com.thortech.xl.dataobj.tcDataObj' ) and dvt.dvt_pre_insert_sequence>0 order by dvt.dvt_pre_insert_sequence
DEBUG,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],select evt.evt_key, evt.evt_name, evt.evt_package from dob dob, evt evt, dvt dvt where dob.dob_key=dvt.dob_key and dvt.evt_key=evt.evt_key and (dob.dob_name='com.thortech.xl.dataobj.tcOIU' or dob.dob_name='com.thortech.xl.dataobj.tcTableDataObj' or dob.dob_name='com.thortech.xl.dataobj.tcDataObj' ) and dvt.dvt_pre_insert_sequence>0 order by dvt.dvt_pre_insert_sequence
DEBUG,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],insert into oiu (OIU_KEY, OBI_KEY, USR_KEY, OIU_SERVICEACCOUNT, OIU_CREATE, OIU_CREATEBY, OIU_UPDATE, OIU_UPDATEBY, oiu_rowver) values (?, ?, ?, ?, ?, ?, ?, ?, ?)
DEBUG,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],select OIU_seq.nextval from dual
ERROR,27 Dec 2010 16:26:44,928,[XELLERATE.DATABASE],Class/Method: tcDataBase/writeStatement encounter some problems: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
java.sql.SQLIntegrityConstraintViolationException: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:85)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
INFO,27 Dec 2010 16:26:44,990,[XELLERATE.DATABASE],DB read: select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
DEBUG,27 Dec 2010 16:26:44,990,[XELLERATE.DATABASE],select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
ERROR,27 Dec 2010 16:26:45,006,[XELLERATE.SERVER],Class/Method: tcDataObj/save Error :Insertion of dataobject into database failed
INFO,27 Dec 2010 16:26:45,006,[XELLERATE.DATABASE],DB read: select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
DEBUG,27 Dec 2010 16:26:45,006,[XELLERATE.DATABASE],select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
ERROR,27 Dec 2010 16:26:45,006,[XELLERATE.DATABASE],Class/Method: tcDataBase/rollbackTransaction encounter some problems: Rollback Executed From
java.lang.Exception: Rollback Executed From
     at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.rollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.doRollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
Thanks .... Please reply if you have any idea..

Getting "Cannot Insert Object" message while attaching .pdf file to excel spreadsheet.

While I am trying to attach an adobe (.pdf) file in excel spreadsheet I am getting message as “Cannot Insert Object”.
I am following the below mentioned steps and getting message as “Cannot Insert Object”.
Open the adobe (.pdf) file from IE browser.
While saving the adobe file on local machine it gives warning as “This document does not allow you to save any changes you have made to it unless you are using Adobe Acrobat 9, Pro 9 or Pro Extended 9. You will only be saving a copy of the original document. Do you want to continue?” On pressing "OK" it successfully saves the file on my local machine.
While I Tried to attach the saved adobe file in a spreadsheet of excel it gives message as “Cannot Insert Object”.
Does any one have any thoughts at all as to how to solve this?

Deepika,
The alert dialog your screen shot depicts will only display if there is some kind of form annotation present in a PDF that is not "Reader Enabled".
Look closer at your 'final' PDF.
A PDF, not "Reader Enabled", that contains any form annotations will, when opened by Adobe Reader,
result in the alert dialog that you mention. A "hard wired" default.
Note that the forms document message bar can be "off" by a selection in Adobe Reader / Acrobat Preferences.
Select the 'Forms' category. Select "Always hide forms document message bar".
Be well...

I cannot insert a graphic image in a new composition: win 7, tb 24

At times when composing a new e-mail I cannot insert a graphic image in the message. I have tried both the Insert button and the Insert icon. This does not happen all the time; but, when it does happen I can't seem to make it work. My system is a Win 7 with Thunderbird 24.3.0.5. I have tried inserting different graphic images and have tried all combinations in the Image Properties pop-up window.
I have closed and reopened Thunderbird. I have restarted my system. I have closed all windows except Thunderbird. Nothing helps. Help! Thank you, Bill Gray

Bill Gray here again. I find that if I open another Write window, then copy/paste my entire e-mail from the initial window -- I can insert graphics into the new window.
What happens in Thunderbird to make this happen? This has happened a number of times. But, at least now I know that I can open a new Write window and get around the problem. Yet, I am still stuck with the nagging question: Why does this happen?
Thank you and God bless, Bill Gray

BizTalk 2006 Event Log Warnings - Cannot insert duplicate key row in object 'dta_MessageFieldValues' with unique index 'IX_MessageFieldValues'.

We have been seeing the following 'warnings' in the event log of our BizTalk machine since upgrading to BTS 2006. They seem to occur randomly 6 or 8 times per day.
Does anyone know what this means and what needs to be done to clear it up? we have only one BizTalk server which is running on only one machine.
I am new to BizTalk, so I am unable to find how many tracking host instances running for BizTalk server. Also, can you please let me know that we can configure only one instance for one server/machine?
Source: BAM EventBus Service
Event: 5
Warning Details: Execute batch error. Exception information: TDDS failed to batch execution of streams. SQLServer: bizprod, Database: BizTalkDTADb.Cannot insert duplicate key row in object 'dta_MessageFieldValues'
with unique index 'IX_MessageFieldValues'. The statement has been terminated..

Other than ensuring that there exists a separate and single tracking host instance, you're getting an error about duplicate keys.. which implies that you're trying to Create a BAM Activity twice with the same data.
I suggest you have a in-depth examination of the BAM (TPE or API) associated with the orchestration. In TPE ensure that the first binding you select is the "Instance Id" or "Message Id" before going ahead to map the ports or others.
Regards.

RFC - XI - JDBC - cannot insert in Table !

Hi Experts...
I have a scene RFC - XI - JDBC !
When executing the application in the SXMB_MONI my status is processed successfully!
But cannot insert the data in SQLServer Tables !
Im Message Monitoring i have the erros:
Error No "action" attribute found in XML document ("action" attribute missing or wrong XML structure)
Error Exception caught by adapter framework: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure).
I need to insert in 4 tables --> CRHE, CRFT, CRFV and TLINES
Where CRHE is the father table.
This is my RFC Structure:
CONTROL_RECIPE_DOWNLOAD
CLIENT
   CRFT
     item
       CRID
       FTNO
       FTTYP
       COSTR
       VORNR
       FTRNR
   CRFV
     item
       CRID
       FTNO
       FVNO
       ATNAM
       ATWRT
       ATFOR
       FVLNR
   CRHE
     item
       CRID
       WERK
       BID
       ADRES
       TSTKZ
       CRSTAT
       KTXT
       MATNR
       MATXT
       INSPLOT
       BATCH
       DEST
       SCHED_START_DATE
       SCHED_START_TIME
    TLINES
      item
        CRID
        FTNO
        FVNO
        TDFORMAT
        TDLINE
This is my XML Receiver Structure:
msgType_ibatch_po
   TABLE1
     Statement
        CRHE
          action
          access
            CRID
            WERK
            BID
            ADRES
            TSTKZ
            CRSTAT
            KTXT
            MATNR
            MATXT
            INSPLOT
            BATCH
            DEST
            SCHED_START_DATE
            SCHED_START_TIME
   TABLE2
     Statement
        CRFT
          action
          access
            CRID
            FTNO
            FTTYP
            COSTR
            VORNR
            FTRNR
   TABLE3
     Statement
        CRFV
          action
          access
            CRID
            FTNO
            FVNO
            ATNAM
            ATWRT
            ATFOR
            FVLNR
   TABLE4
     Statement
        TLINES
          action
          access
            CRID
            FTNO
            FVNO
            TDFORMAT
            TDLINE
How to resolve this problem ??? ...i believe the problem is in the action of Message Mappings ?? ...but have some problems to resolve it !
Some one can Help me !!!
Thanks Very Much for the atention !!
Regards..
Boni.

Hi Bravesh...
I don't have error in JDBC adapter !! This is OK !!
When i send the message from XI to R/3 ...in SXMB_MONI it does not contain errors !
When executing the application in the SXMB_MONI my status is processed successfully!
But cannot insert the data in SQLServer Tables !
Im Message Monitoring i have the erros:
Error No "action" attribute found in XML document ("action" attribute missing or wrong XML structure)
Error Exception caught by adapter framework: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure).
thanks.
Boni.

Cannot insert object error using Power View in Excel 2013

I created a short table in Excel 2013, positioned the cursor in the table and clicked Inset/Power View Report. I get a status window saying Excel is opening a Power View sheet but then I get a Power View error: Cannot Insert Object. I am able to insert new
tabs in the workbook. When I try the insert again, I just get the Power View error. I looked at other threads with similar issues and did the following:
Made the Formula bar visible - no change
Tried to repair Office 2013 but that option is not available when I right click on the program in the Control Panel
De-installed Silverlight - Tried to insert Power View Report. A Power View tab was created with the Power View picture and Power View ribbon. Got the message to install Silverlight and Reload. Installed Silverlight hit Reload and the Power View tab didn't
change. Hit Power View Report and got the Cannot Insert Object error message again.
Any help is appreciated.

Hi,
Did you use PowerView first time? I notice you had found a similar thread and tested the solutions.
PowerView is an add-in in Excel2013, We must make sure that you check some option in the trust center and Add-in center.
http://blogs.office.com/b/microsoft-excel/archive/2012/10/04/intro-to-power-view-for-excel-2013.aspx
Location1: Excel Options>Add-in>Solver Add-in enable
Location2: Excel Options> Trust Center> Add-in
Then you said that you couldn’t repair the Excel 2013, please refer to the following link:
http://office.microsoft.com/en-gb/outlook-help/repair-office-programs-HA010357402.aspx
At last, we may test it in clean boot, please refer to the following link:
http://support.microsoft.com/kb/929135
Regards,
George Zhao
TechNet Community Support

Cannot Insert Object in Excel 2013

I am having trouble inserting PDF's in Excel 2013. I go to Insert-->Object-->Create from File then browse to the PDF and select the checkbox for "Display as Icon." After doing this i get a generic error message that says "Cannot Insert Object." No other details.
Specs:
Windows 7 x64
Office 2013 x64
Adobe Reader X and XI. Tried them both.
What I have tried:
The most common answer I have found was to disable the enhanced security in the Adobe Reader preferences. This does not help.
I also tried downgrading from Adobe Reader XI to Reader x, disabling enhanced security. That does not work either.
I have found a workaround in Excel by going to Insert-->Package and doing it that way, but it does not show the Adobe Reader icon in the spreadsheet when it's done. If there's a way to use this method and still have the adobe icon that'd be great.
I called Microsoft support and they think this is an Adobe issue, because I can insert other things via the create from file method, just not PDF's.
Other notes:
The Insert-->Object-->Create from File method works fine in Excel 2010 so I think that Adobe Reader doesn't do well with Excel 2013.
I need the inserted PDF's in spreadsheets to look a certain way. They must have the Adobe Icon and I need to be able to change the text below the icon.
Does anybody have any suggestions?

Update:
I uninstalled Adobe Reader and tried a different PDF reader and the insert in Excel works fine. I really would prefer to use Adobe though. This leads me to believe that maybe it's just a setting or something in Adobe reader. Any suggestions are greatly appreciated.

Cannot insert Chinese character into nvarchar2 field

I have tested in two environments:
1. Database Character Set: ZHS16CGB231280
National Character Set: AL16UTF8
If the field type of datatable is varchar2 or nvarchar2, the provider can read and write Chinese correctly.
2. Database Character Set:WE8MSWIN1252
National Character Set: AL16UTF8
The provider can not read and write Chinese correctly even the field type of datatable is nvarchar2
I find that for the second one, both MS .NET Managed Provider for Oracle and Oracle Managed Data Provider cannot read and write NCHAR or NVARCHAR2 fields. The data inserted into these fields become question marks.
Even if I changed the NLS_LANG registry to SIMPLIFIED CHINESE_CHINA.ZHS16CGB231280, the result is the same.
For the second situation, only after I change the Database Character Set to ZHS16CGB231280 with ALTER DATABASE CHARACTER SET statement, can I insert Chinese correctly.
Does any know why I cannot insert Chinese characters into Unicode fields when the Database Character Set is WE8MSWIN1252? Thanks.
Regards,
Jason

Hi Jason,
First of all, I am not familiar with MS .NET Managed Provider for Oracle or Oracle Managed Data Provider.
How did you insert these Simplified Chinese characters into the NVARCHAR2 column ? Are they hardcoded as string literals as part of the SQL INSERT statement ? If so, this could be because, all SQL statements are converted into the database character set before they are parsed by the SQL engine; hence these Chinese characters would be lost if your db character set was WE8MSWIN1252 but not when it was ZHS16CGB231280.
Two workarounds, both involved the removal of hardcoding chinese characters.
1. Rewrite your string literal using the SQL function UNISTR().
2. Use bind variables instead of text literals in the SQL.
Thanks
Nat

Java Install, Cannot insert a key value pair into the secure store fails,

Dear All,
I'm doing Java Intallaion in BI7 on CI and in the midle of installtions we encounter,
TRACE      [iaxxejsexp.cpp:199]
           EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.secureStore.cannotInsertIntoSecureStore:
Cannot insert a key value pair into the secure store fails; see output of log file SecureStoreInsert.log:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store..
ERROR      2008-04-23 11:36:21
           CJSlibModule::writeError_impl()
CJS-30051 Cannot insert a key value pair into the secure store fails; see output of log file SecureStoreInsert.log:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store..
TRACE      [iaxxejsbas.hpp:460]
           EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR      2008-04-23 11:36:21 [iaxxgenimp.cpp:731]
           showDialog()
FCO-00011 The step insertAdminDataInSecStore with step key |NW_Addin_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|8|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|insertAdminDataInSecStore was executed with status ERROR .
TRACE      [iaxxgenimp.cpp:719]
           showDialog()
There's any want in here can help us Please,
Thanks and Best Regards,
Chrisna

The clean way to Uninstall JAVA is through SAPINST.
Make user you drop only the JAVA Schema ID (SAPSR3DB)
If you want to uninstall manually, follow as mentioned below :
1. Stop the central services instance and all dialog instances of your SAP system:
a) Log on to the corresponding instance host as user <sapsid>adm.
b) Execute the following commands:
   To stop the central services instance:
             stopsap r3 <SCSinstanceName>
   To stop a dialog instance:
            stopsap r3 <DialogInstanceName>
2. Stop the J2EE Engine of the central instance:
a) Log on to your SAP system.
b) Call transaction SMICM.
c) Choose Administration J2EE Instance (local) Send Hard Shutdown
2. Drop the J2EE DB schema (the db schema for this one SAP SID) BE VERY CAREFUL, do not drop the DB schema for another existing system or
the ABAP schema.
a. Log on as user ora<dbsid>.
b. Start sqlplus and connect to the database. Enter:
sqlplus /nolog
c. SQLPLUS>connect / as sysdba
d. Enter the following command to delete the database objects of the database schema:
SQLPLUS> drop user SAP<SCHEMA_ID>DB cascade;
e. Enter the following command to get the file name of the corresponding data file in the file system:
SQLPLUS> select file_name from dba_data_files where \
tablespace_name = PSAP<SCHEMA_ID>DB;
f. Enter the following command to delete the tablespace of the database schema:
SQLPLUS> drop tablespace PSAP<SCHEMA_ID>DB including contents;
g. Exit sqlplus:
SQLPLUS> exit
3. Remove folder "data" at: /sapmnt/QO1/global/security/data
4. Remove folder "SDM" at: /usr/sap/<sid>/<Central instance>/SDM
5. Remove folder "j2ee" at: /usr/sap/<sid>/<Central instance>/j2ee
6. Revert CI instance profile to their original state (backup copies should exist) # they should be in the state before the start of the JavaAdd In
7. If lines beginning with the following parameters appear, delete these lines from the default profile, /usr/sap/<SAPSID>/SYS/profile/DEFAULT.PFL:
j2ee/dbname =
j2ee/dbtype =
j2ee/dbhost =
j2ee/dbadminurl =
j2ee/scs/host =
j2ee/scs/system =
j2ee/ms/port =
8. If lines beginning with the following parameters appear, delete these lines from the central instance pro?le and from all dialog instance pro?les,
/usr/sap/<SAPSID>/SYS/profile/<SAPSID>_<INSTANCE_NAME>_<host_name>:
exe/j2ee =
exe/jlaunch =
rdisp/j2ee_start_control =
rdisp/j2ee_start =
rdisp/j2ee_timeout =
rdisp/j2ee_libpath =
rdisp/frfc_fallback =
jstartup/trimming_properties =
jstartup/instance_properties =
jstartup/protocol =
jstartup/vm/home =
jstartup/max_caches =
jstartup/release =
j2ee/dbdriver =
9. Delete the central services instance
10. Restart ABAP and Install JAVA Add-in
Edited by: Shaji Jacob on Apr 27, 2008 11:46 AM

Cannot insert Widget in DW CS5

Similar Messages

Maybe you are looking for