Cannot install 1.7.1 on Snow Leopard
I tried both the online and standalone installation. In both cases I get an error message saying "this will install only on Intel macs". This is insane. Why won't it install? Of course I have an Intel MacBook Pro. How can download an older version to check if that gives the same problem?
Any help appreciated. Thank you,
Abhay
Hi
As suggested in another post, boot into 32-bit mode and then install it. It works.
Similar Messages
-
Cannot install iTunes 10.7 on snow leopard MacBook Pro.
I have received my new iPhone 5 two weeks ago but I am unable to use it since I cannot install iTunes 10.7. I have a MacBook Pro with Mac OS 10.6 (snow leopard) and 2GB RAM. I have been trying to install it and every time I get an error message saying that the disk could not be verified. I tried skipping verification and again it would allow me installing. Furthermore, I am trying to do my recommended software updates (including one about security) and my mac never succeeds. I am just wondering if that could be the problem.
Any advice would be much appreciated!
Thank you!Try updating using a .dmg installer downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
omeone meet the problem, I am not abble install mac OS 10.6 snow leopard on intel based machine, (intel core 2 duo, 2,8 ghz, 4GB RAM, 320 GB HDD, OSX 10.5.8) system every time wrote "OS X snow leopard cannot be install on this machine" please help, Majo
It is retail disk, i bought it in apple store. I also resetter PRRAM and SMC and checked disk. I also tried clean installation and upgrade, nothing works, after run installation program after few seconds wrote: OS X Snow Leopard cannot be install on this machine :-(
Thank you for your answer
Majo -
My MacBook Pro originally came with Leopard. I have the OS and Applications disks for Leopard but I cannot find my upgrade disk for Snow Leopard. I would like to perform a clean install of Lion on the new hard drive and restore some data from my Time Machine backup. I am not looking to restore the current image to my new hard drive. I have not yet removed the exisiting hard drive nor have I wiped my data.
The only way to do that is to buy a New SL Retail DVD. Or you could buy the Lion Install USB thumb drive from Apple for $69.
You must have SL installed to then install Lion or have a thumb drive with the Lion installer.
You could also create a Lion USB Recovery thumb drive using Lion Disk Assistant. But you need to have Lion already installed and the Lion RecoveryHD Partition on your drive to make the Recovery thumb drive.
Lion Recovery Disk Assistant -
How does one un-install Lion and revert to Snow Leopard?
Anyone know how to un-install Lion and revert to Snow Leopard?
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard. I suggest you make a separate backup using Carbon Copy Cloner 3.4.1. -
Here's how to Install Omnipage Pro X in Snow Leopard
Many users have reported having trouble installing Omnipage Pro X in Snow Leopard (usually only those who have done a "clean install" of Snow Leopard, or try to install Onmipage Pro X on a brand new Snow Leopard system). Those who have done an "upgrade" to Snow Leopard, and hence retain all their previous apps, typically find Ominpage Pro X continues to work. But those trying to install it in a new system usually report that the installer will quit at some point with a non-specific error.
Nuance's official line is that Omnipage Pro X is not supported on Snow Leopard. But Omnipage Pro X does work on Snow Leopard and can be installed - here's how:
Simply copy the entire installer CD across to a desktop folder, just using the Finder to drag and drop all the files from the CD. Then run the installer from the desktop copy.
This works! The installation runs all the way to the end and Omnipage starts up and works perfectly, once you enter your licence code. I have no idea why this should work, when installing from the CD fails.
Try this method and see if it works for you!pull all your drives so you just boot the DVD
If you have an ATI 5770 you cannot boot with less than 10.6.5
Ideally you would go through phone system and buy Lion, download and SAVE and create a Lion Installer media (DVD and flash memory are possible).
If you can't boot the DVD alone, let us know as gives a better idea. -
How do I install mountain lion but keep snow leopard as a bootable os
I'm caught in a vicious circle.
I need mountain Lion to be able to use iCloud and to be compatible with a couple of apps on my iPad. However some of my major apps on my mac Pro won't work under Lion or mountain lion.
SO the answer is to have both Snow Leopard and Mountain Lion on my Mac Pro.
Does anyone know of any instructions on installing Mountain Lion onto one SSD, whilst leaving Snow Leopard on another, allowing me to boot from either.
Also - any advice on the cleanest way of installing my apps under Mountain Lion (those that are compatible). I'm confused to how I can install my apps twice, especially if I have all ready registered Unser Snow Leopard.
ThanksI'm assuming that you currently have an SSD with Snow Leopard on it, and another SSD with no operating system. Is that correct?
What I would do is use the Snow Leopard DVDs to install a fresh copy of Snow Leopard on the SSD that currently has no operating system, and "migrate" your data and applications from the other SSD. (alternatively, you could use something like Carbon Copy Cloner to duplicate one SSD onto the other - but that's probably only an option if one SSD is completely blank or you're willing to erase it).
Then upgrade to Mountain Lion on the original SSD.
When you're done, hold down the option key when you start up to select which OS to use.
For many applications, it won't matter which SSD they're on - you'll be able to run them from either system without worrying about where the app is installed (each will have it's own preferences, stored on the current startup drive). But some applications are more complex, and rely on additional files that are scattered around the Library folders on the startup drive. Since you migrated your applications and data, you should have everything that's needed on both systems, including license keys, etc. I did this for a little while with Quicken, and I actually left the Quicken app on the Lion drive - it worked just fine even though I started up from an external Snow Leopard drive (I skipped the migration step entirely, and reentered my Quicken license code when starting up from Snow Leopard).
How successful this will be depends on exactly which applications you're using. Most of them will be OK, but if you're using something that has some esoteric copy-protection mechanism, you might run into a little bit of trouble. Consider upgrading the "new" Snow Leopard install to Mountain Lion, if that's the case, so you're original system SSD will remain Snow Leopard, with no changes. -
I don't have the option of installing a clean copy of Snow Leopard
I'm new to Mac and have been exploring different programs that would fulfill the same functions as the programs I had been using on Vista. Unfortunately, my computer got a little wonky somewhere along the way and I want to remedy it by erasing the hard drive and installing a clean copy of Snow Leopard. I've looked in my owner's manual as well as several websites online. They all tell me to select something either from a tab or an Options menu but there isn't one. When I reach the Select Destination window, I have the option to customize what is installed (i.e. Quicktime, Rosetta, etc.), go back and continue. Is it not possible or something???
it's possible but there is likely no need to do this. what exactly is wrong with your computer? a simple reinstall of snow leopard on top of your current system will cure many ills and will preserve your data and applications. and many problems can be solved without reinstalling at all.
but if you insist on doing a wipe and install boot from the SL install DVD and start disk utility from utilities menu at the top. erase your hard drive using the erase tab in disk utility. then quit disk utility and proceed with the install. and if you do reinstall I suggest you back up your data first. otherwise it will be completely wiped when you erase your hard drive. and you should always back up anyway.
Message was edited by: V.K. -
Installing Omnipage Pro X in Snow Leopard - this worked for me
I was having trouble installing Omnipage Pro X in Snow Leopard - the installer would get near the end and then just quit saying there was an error. A search on the web revealed many people experienced this, with a few even getting in touch with Nuance who told them Omnipage Pro X is not supported on Snow Leopard.
I was just about to give up when I had a "last throw of the dice" crazy idea. I simply copied the entire installer CD across to a desktop folder, just using the Finder to drag and drop all the files from the CD. I then ran the installer from the desktop copy.
And it worked! The installation ran all the way to the end and Omnipage starts up and works perfectly. I have no idea why this should work, but installing from the CD fails.
So if all else fails, try this method and see if it works for you!I went to the apple store and find that I would have to pay for the QuickTime MPEG-2 Playback Component. You suggested there is a place to download it.
If we don't have the component in our Utility folder (I don't) that means I must purchase? -
Installing Java 1.5 on Snow Leopard Problem
I followed this link (http://chxor.chxo.com/post/183013153/installing-java-1-5-on-snow-leopard) to resolve a problem with getting some software to run...
But when it came to trying to open the app it opened Terminal and came up with this message...
Searching for Java(tm) Virtual Machine...
........HotSpot not at correct virtual address. Sharing disabled.
** ATTENTION *
Please Attach Debugger : No Autorelease pool exists
Press any key to continue...
** ATTENTION *
Please Attach Debugger : No Autorelease pool exists
Press any key to continue...
logout
[Process completed]
It then opened Java, I waited a long time and found it wasn't responding. Any ideas?Post to the Unix forum under OS X Technologies. BTW, review the steps in http://daveyshafik.com/archives/721-fixing-zde-5-5-in-snow-leopard.html and ensure that you did it correctly.
-
I have a new iMac. Can I install my iWork from my Snow Leopard set and upgrade it or will I need to buy new iWork? If so why?
cherylfrommiami wrote:
I paid for the cd set when my last computer needed an upgrade. I just want to use iWork on my new computer OSX10.8
As Niel states you can use your current iWorks.
If you want the latest version you will need to purchase the componets in the Mac App Store. -
Installed new ios5, running also snow leopard on MacBook, iCloud is on. No contacts, no calendar on iPad or iPhone. What to do?
iOS installed ok.
Still running snow leopard on MacBook.Installed new ios5, running also snow leopard on MacBook, iCloud is on. No contacts, no calendar on iPad or iPhone. What to do?
iOS installed ok.
Still running snow leopard on MacBook. -
Hi,
I want to install both MAC OS X Snow Leopard and WINDOWS on a same PC. Is it possible..then mention the minimum Hardware support to install both Operating Systems on a PC. I am waiting for relevant reply from Apple Support Team.
Thank You.I am waiting for relevant reply from Apple Support Team.
Then you'll be waiting a long time. This is a user to user support site hosted by Apple. The Apple Support Team doesn't respond to posts here.
For Snow Leopard, you need an Apple computer with an Intel processor of any flavor. Here are the specs from the Apple Store:
System Requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
You'd have to contact Microsoft to find out what specs its OS requires, but I imagine the above would cover it.
Also note that Snow Leopard is only licensed to run on Apple branded equipment. -
I installed OSX server 10.6 snow leopard on my IMAC, but still have choppy videos. can anyone tell me how to fix the problem
By your use of "still", did this problem exist before OS X Server was installed? OS X Server itself has no particular linkages to video processing, beyond what OS X client provides.
Some details on the configuration might be useful. Are these videos you're having issues with stored locally in files, or are these videos received over the network and played? If the videos are local, have you tried playing the videos from a different disk? If the video files are remote, can you download the videos and play them as a test?
What software are you using to play the videos? QuickTime? QuickTime X? Does using VLC or another player work better? There are some discussions of choppy videos around the forums, too. -
I have a 2009 iMac 4,1 2GHz intel Core duo it says here I have 1GB of memory. I had it running on snow leopard 10.6.8 I still have the SN software that i bought to made the upgrade. Had some guest staying at my place and they deleted the running os and a lot of files and stuff..., now is running on leopard 10.5.8 and it's giving me a lot of problems because is soo obsolete, also hte computer is crashing all the time and every time I try ti install the SL dvd, the computer won't read the dvd and I'm keeps booting me off. Is not getting better at all and now when I restart the iMac before I get the grey apple screen, the folder of death icon flashes, (I already lost my Macbookpro due this situation. What can I do to resolve this aggravating and frustrating Issue. Need help now ..Please
Before we get too far, please clarify this part:
I have a 2009 iMac 4,1
A 2009 iMac cannot be an iMac 4,1; they are 9,1 and higher. Did you mean to type "2006?" That would be an iMac 4,1. We need to pin down the model issue before proceeding.
It could be the drive, not the disk, that is dirty. Try a drive cleaning disk, usually about US$5-15 at home entertainment, electronics stores and office superstores
Maybe you are looking for
-
Can I change the background color of the title " Knock Out" ?
Hello, I am facing a problem with editing the title background, the original title background seems to be set as" transparent" or "black" , while I need it not to be black, but make it white or into any other color... I tried to copy the title "Knock
-
Is it worth recompiling for dual core?
I've just bought a new pc with dual core. Is it worth building none/some/all apps from source to take advantage of the second processor? My guess is only some apps will benefit from having two processors, things like multimedia, can anyone confirm?
-
Problem deploying OLAP report to Crystal Reports Server
I have developed a simple OLAP cube report using Crystal Reports Developer (11.0.0.1.1282). The report correctly previews and shows values against the cube that I have chosen as the datasource. The datasource is not my local computer but another comp
-
Hi all I created small mapping as I'm new to OWB, doing loading emp data from source to target on Oracle source/target on same instance using 11g, I'm getting error, Table not present, What is missing. mapping is simple, I created same table in sourc
-
select ser_no,accode,credit,debit,'JV',decode(accode,2102650,(credit>0),'Y',NULL) from table_nameI got SER_NO ACCODE CREDIT DEBIT 'J D 1 7060230 0 23177 JV 2 5110200 28855 0 JV 3 2102650