Cannot Install 10.5.1 Update

Hello,
I have installed After Effects CS5.5 for Mac on OS X v10.7.5. I downloaded the After Effects CS5.5 10.5.1 update, and I cannot install it. The update installer vaporizes/quits/crashes before it can even appear in the Dock. I went looking for a crash log in the Console but did not find any trace of what did (or did not) happen.
Can the After Effects CS5.5 10.5.1 update be installed on Mac OS X v10.7.5? If so, where should I be looking to resolve this vaporize/quit/crash when I launch the 10.5.1 updater?
Thanks for reading!

Make sure that you downloaded the correct updater. See this page for details:
http://blogs.adobe.com/aftereffects/2011/06/after-effects-cs5-5-10-5-1-update-fix-for-text -entry-bug-and-serial-number-problem.html
Note that there is only one bug fix in this updater, so unless you are working with large amounts of text in a single text layer, you may not even need to apply this update.

Similar Messages

10.5.8 update_'You cannot install Mac OS X Update on this volume.'

You cannot install Mac OS X Update on this volume. This volume does not meet the requirements for this update.
This is the message I get when I click on the hard drive I wan to install it on, I have two hard drives, neither want to work with it. the one with the osx 10.5 has 63 gb left and the empty one has 102gb left. Why is it doing this/ what should I do?

If you're not using the combo updater, use it instead.
(55808)

You cannot install mac os x update combined on this volume

Hi all,
I need your precious help. I have install in my imac leopard 10.5.7 and last night I tried to update for 10.5.8, however the software update didn't identify the new update.
After that I download the update from Apple website but I couldn't do the update because of this message: "you cannot install mac os x update combined on this volume. This volume does not meet the requirements for update".
Could you please help me?
Thanks,
lG

lgcustodio wrote:
I ran the disk utility and saws verify disk ok. I did the same process for repair disk permissions and seems to have problems.
These warnings are accurate but according to Apple can safely be ignored. See Mac OS X 10.5: Disk Utility's Repair Disk Permissions messages that you can safely ignore. IOW, They are not normally problems.
I check the volume scheme but I don't have any partition
You do have partitions & a partition scheme. To check what the scheme is, click on +the drive itself+ in the list on the left in Disk Utility. It will probably be identified as "298,1 GB WDC WD3200AAJS-40VWA0 Media" or something very similar. If it contains the startup disk, it will be the first item in the list. It will have one or more named volumes indented under it, such as "Macintosh HD."
When you have clicked on the WDC drive instead of a volume name indented under it, you should see seven items of information about it at the bottom of Disk Utility's window, to the right of an icon representing the drive. The info is in two columns. The last item in the rightmost column, below the S.M.A.R.T. Status (which should say "Verified"), should be "*Partition Map Scheme :* " & be followed by the scheme type. It should be "GUID Partition Table."
If you don't see the seven info items after selecting the drive, it may indicate a problem that needs attention, but I suspect that you just haven't looked in the right place for the info....
As for the 'cannot install' message, make sure that you have downloaded the right update, that it is not the server update version for example. You may need to download it again, discarding the first download as somehow defective.

"You cannot install Mac OS X Update on this volume."

"You cannot install Mac OS X Update on this volume. This volume does not meet the requirements for this update."
This is the error I got when I tried to update my Macbook from OSX 10.5.6 to 10.5.7.
I downloaded this file (http://support.apple.com/kb/DL826)
A quick Google search suggested I get this one instead (http://support.apple.com/kb/DL827) The "Combo" update.
Well, the 10.5.7 Combo Installer didn't help either.
My friend suggested I try 10.5.8
Same error message again.
I really need to get at least 10.5.7 for software ASAP. I plan on getting Snow Leopard next month or so, but I really need at least 10.5.7 in the meantime. Any ideas?

Some things I've tried:
- I ran a Verify Disk in Disk Utility, and it said there are no problems.
- Update Logs haven't shown any errors, nor has my computer ever tried to download the update and failed, according to the log.
- I tried checking updates on a different account, no luck there.
So far, that's all I've tried. Some of the other solutions seem more drastic, and so I'll leave those up to the skilled Tech Support guys on my campus, I've got an appointment tomorrow.

Cannot install Touch ID after update 8.1.3 in iPhone 5s.

Cannot install Touch ID after update 8.1.3 in iPhone 5s. In trying to install unlocking my phone is refused, as is allowing access to iTunes and App Store. Before updating I used Touch ID without any problem.

Restore iPhone with iTunes on computer. If after the computer Restore there are still problems, iPhone 5S has Warranty, make Genius reservation or set up service and take or send iPhone to Apple for resolution.

Cannot install neither Raw combatility update 3.9 nor 3.10

Hi Folks,
I´m running OSX 10.6.8 on an iMac and cannot open the data of my Sony Nex 5n. The raw combatibilty updates doesn´t help because they can only be installed if aperture 3 or iphoto 11 is installed.
This support document
http://support.apple.com/kb/HT3825?viewlocale=en_US
claims that there is system-level-support for my camera after installing the Digital Camera RAW Compatibility Update 3.9.
But this update I cannot install (see above)!
Any hints what´s going wrong? – Thank you!
Kind regards
Karsten

fane_j wrote:
RRRobbie wrote:
they can only be installed if aperture 3 or iphoto 11 is installed.
Where is this information from? I don't see anything in RAW Camera Update 3.10 that would require iPhoto 11 or any other application.
I tried to install it and get this information (sorry, it´s a german system)
fane_j wrote:
Be that as it may, iPhoto 11 (iPhoto v9) is bundled with Snow Leopard. (There's an iPhoto v9.2.2 update for it.) If, indeed, the RAW Camera Update requires it and you have removed it, you can install it from the SL Install DVD, and then install the RAW update.
iPhoto wasn´t bundled with Snow Leopard, it was a separate purchase included in iLife 11. Today it is only to buy in the Mac App Store.
fane_j wrote:
Alternatively, download the update, then use Pacifist to install it yourself.
That might damage my system, I have to work with. Thank you.

I cannot install the latest software update on my iPad - why?

please advise why I am unable to install the latest software update on my ipad

hi i think we want some information about your device
but those might be problems
            1.you ipad is updated to latest version
            2.low space in disk drive
            3.your device isnt a original one
send some pics of error massage or send the error massage i will be use full to solve your problems
                                                                        regards

Cannot install acrobat 9 pro updates on osx lion

Hi,
I have not browsed through the forums here, so please forgive me if this question had been asked before. Are there known issues between Acrobat 9 Pro and OSX Lion? We have a user who has OSX 10.7.5 and Acrobat 9 Pro. He is not able to update Acrobat as there is no option to do so when he clicks on Help. He tried manually downloading and installing updates but when he is asked to select the copy of Adobe product to update, he only has the option to cancel.
I installed Acrobat 9 Pro on a Macbook running Mountain Lion and did not encounter any problem installing updates.
Is this a known issue?
Thanks,
M

Hi, yes, understood that they are different things. However, if I'm to
rely on the link provided on the first reply then does it follow that 9
Pro is also not supported on Mountain Lion? I have a MACbook here on OSX
Mountain Lion, and as I've also mentioned on my first post, I was able to
install 9 Pro and update it as well.
It really is just odd that Lion is singled out here. I also checked this
and there is no mention of problems with updating 9 Pro:
http://helpx.adobe.com/x-productkb/global/known-issues-mac-os-10.html
Sorry, but just trying to really find a workaround for this issue right
now. We though of using X Pro instead but, again, if I rely on the system
requirements on this link -
http://www.adobe.com/sea/products/acrobatpro/tech-specs.html - the OSX
version our user has is still not supported.
Mac OS
Intel processor
Mac OS X v10.5.8 or v10.6.4
512MB of RAM (1GB recommended)
1.2GB of available hard-disk space
1024x768 screen resolution
DVD-ROM drive
Safari 4 for Mac OS X v10.5.8; Safari 4 or 5.0.x for Mac OS X v10.6.4
Thanks.

I cannot install the new Itunes update on my PC

I cannot successfully install Itunes update to my PC. Error messages are: (1) an application has made an attempt to load the C runtime library incorrectly;
(2) ituneshelper.exe tried to load the tuntime library incorrectly.
I have tried downloading, saving, and manually running Itunes64setup.exe as well as initially letting it run automatically. I also receive a message that Apple Mobile device failed to start correctly. I told it to ignore this.

Also consider the following approach. I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.

Cannot install 10.6.6 Update

I can't install the 10.6.6 update from the update menu, nor can I install the combo update.
Installer[154] IFJS:*exception:TypeError:Result of expression 'my.target'[null] is not an object.
What gives? Every single time I go to update something goes wrong. I'm just about to throw this poor excuse for a laptop out the window. Oh and BTW - yes I've already FORMATTED and reinstalled OS 10 3 times. Genius bar gurus are baffled as well. It says Java cannot be evaluated. Riddle me this Jobs.

Well here is a walkthrough for users having this problem. If you jack something up, don't blame me. It's not my fault. This is what I did, it worked, hopefully it works for you.
BACKUP EVERYTHING. Literally, do it. Backup everything! Back-Up-Your-Files. I cant tell you how important this is. Don't say "Oh I'm the man, I wont mess anything up." If you do - then your not the man.
If you are experienced enough to make a bootable backup, great! That will make things easier if you bone something up.
If not grab an external hard drive and your OS install disc.
Step 1 (For users without bootable backup) :
Rename your external drive to External Boot (trust me, just do it)
Open the disk on your desktop and hit command-shift-g
Paste this line in: /Mac OS X Install DVD/System/Installation/Packages/
Open OSinstall.mpkg
Select the external drive and install OSX onto it.
Step 2: (For everyone)
Shut down.
As you turn you computer back on hold CMD-OPT-SHIFT-DELETE
Select your external drive.
It will take a while to boot.....
When it gets going, you will have full functionality, just a little slower.
Download and install Pacifist at http://www.charlessoft.com/
Download the update you need.
Open the update DMG and copy the PKG to your desktop.
Open Pacifist and drag the PKG into the window.
Right click on the PKG in Pacifist - select " Install to Other Disk"
Select your internal drive!! Notice that "External Boot" is obvious. This is why we renamed your external drive.
This will take a while. Let it install.
Okay, if it's done - lets reboot into it. You need to boot in using SAFE MODE. Im doing a true dual boot on my macbook - so I have chameleon installed and I just need to use a switch to start into safe boot. I think you have to hold shift during startup. Look up this info.
If you've gotten into safe boot - your 50% there. Go into the disk utility and repair the heck out of your disk.
Your applications may not open properly, but thats because permissions are messed up. Just keep repairing. If you have to, boot into your external again and use that to repair.
You have your update.
-- Anti-Fanboy

WinNT4.0: Cannot install JRE 5.0 Update 7

I have a clean install of WinNT4.0 with SP6, IE6+SP1 and all Windows Updates. Nevertheless I�m not able to install JRE. During the install process I get a "there is a Windows Installer problem. A specific DLL cannot be executed" (roughly translated from german). Why is that happening on a clean installation? Right now I cannot even unstall. I�m stuck :(

Many people (including me) posted this "INSTALLATION PROBLEM" (Windows Installer going crash when attemting to install JRE 5.0 Win for AMD64).
It seems DEP (Data Execution Prevent or Protection...) service causing "forced" quitting of Windows Installer, but whatever you either exclude Windows Installer application from DEP list or even turn-of DEP service it won't help in any case.....Windows Installer 'll encounter problems anyway..and crash when attemting install.
Sun says (in a "post note") that support for AMD64 'll be available since the release 2 of JRE 5.0 but for what Operative System??
On Windows XP PRO 64bit Ed. (or was only for Windows 2003 Server 64bit Ed.?) the support for AMD64 CPU has been introduced only in this latest release 4, and IT DOESN'T INSTALL AT ALL (at least for some users..)!
Most strange thing is that although there are several complaints concerning this matter since many time, NOBODY seems to have been able to fix to this common complaint. Is it possible nobody at Sun applied on this problem? Are they still working on it? Did they fix it? If anybody knows anything about this matter, please take me informed! Thanx.

Cannot install Windows 8.1 Update on Lenovo Yoga 11s

Hi guys,
Hope someone will be able to help me out from this never ending issue.
I have been trying to update my Yoga 11s to Windows 8.1 for the last 2 weeks, but it just doesn't work. It kees failing when it gets to "Applying Settings" and then reboots twice and eventually rolls back to the Windows 8 installed. I have tried everything I've read on the internet from disabling my BT to installing all the latest drivers to even installing from a clean boot of Windows 8, but NOTHING works.
Has anyone successfully made this upgrade? Any assisstance will be highly appreciated.
BTW my laptop is installed with Windows 8 Single Language and running BIOS version 77CN20WW (v1.06)
Thanks

Thank you for your input. I must say that I did have 8.1 installed and used it for about a month with no issues. Then recently when I was installing an update for graphics I got the black screen as described. I have since then not been able to install 8.1. I will continue to look for a solution. Thanks for your reply

Cannot install 10.0.3 update

Hi all;
There is no way in the world that I can install the FCPX UPDATE 10.0.3, and for that matter the Motion 5 update, or Compressor either.
running Lion 10.7.2 and have no issues, the Apps, FCPX is ver 10.0.2, from the previous update, that went flawlessly from the AppStore at that time
all the apps show as puchased at their respective original dates, and the AppStore shows the 3 updates ready to be downloaded.
I begin to download and everything goes well, data apparently downloads well for FCPX 1.47 Gb, for Motion 1.17 Gb if I do them separetly but when they start to install it never goes to completion, it seems as if they start an infinite loop indicating "one sec remaining to 3 sec remaining" and nothing gets installed.
I have searched the AppStore Forum every which way and have tried several work arounds, short of upgradind to Lion 7.10.3 because of all the issues they are having with that update now and at least my OSX is working well. I have not changed my account at AppStore in fact is the same as always, and just two days prior to the anouncement of the update I used it for another app and everything went well.
If you can be of help it will be appreciated.
Thanks,
AppleLou

Yes , i did and everything is good, no repairs needed
any other suggestions
Thanks,
AppleLou

Cannot install 8.1.7 update - "Acrobat... is still running"

Running OS X 10.6.1, with Acrobat 8.1.6 Professional.
I have tried both using Adobe Updater, and the standalone 8.1.7 updater, but I keep getting the error
Close Adobe Acrobat application
The Adobe Acrobat application or the Safari web browser is still running. These applications must be closed before the update can proceed.
Well, both are closed - if I run this update immediately after rebooting, I still have the problem. Are there certain processes I can quit which will fix this? Reinstalling the whole app is a real PITA. Thanks for any assistance.

PjonesCET wrote:
Report the problem here (click link)
I believe you and others have found a bug in the installer.
report what you have here and what you have done.
Also Try installing Rosetta. Its possoble the installer was written PPC code.
Cold comfort to know that... Where do I submit bugs?
The Acro updaters are universal, so: no Rosetta option.

Cannot install LR 3.5 update - error 1152

Hi,
I've been trying to update my LR to ver. 3.5, but as soon as run the setup file, I this error.
I've tried to extract the setup file to my desktop first, but the same error appears.
I've updated LR several times in the past without any problems, but with the v3.5, I cannot.
I am using Windows 7 Ultimate 64-bit SP1.
Any suggestions?

Hal,
Thanks for the suggestions.
I have tried re-downlaoding to a different location. but the same error occurs.
Runnnig the MSI from extract directory did not help.
Tried to "run as administrator"....did not help.
20 GB free on C-drive.
Really strange, specially because all previous updates went OK.
The only thing I've noticed is that in "C:\Users\Carsten\AppData\Local\Temp" folder there is not sub-folder named "{FD.........". (as referred to in error message)
Further help will be much appreciated.
Carsten

Cannot Install 10.5.1 Update

Similar Messages

Maybe you are looking for