Cannot install 10.7.2 final, had a developer build installed

I currently have 10.7.2 build 11C26 (dev) installed. When the final 10.7.2 came out I tried installing and am getting the error "Mac OS Combined Update cannot be installed on this disk. The volume does not meet the minimum requirements." There is no information on why it fails or why the volume does not meet the requirements. I'd rather not re-install Lion (I don't use Time Machine), anyone have any ideas on how to get 10.7.2 installed?

sig,
This is my post about my problem : https://discussions.apple.com/thread/3380352 (I'm new to Mac and OSX)
I recently (2011-07) bought a MBP with Snow Leopard on it. From the moment Lion arrived I installed it on my new machine. I bought a legal version in the app store. I really don't know how it is possible I have build 11C26 ??? Look at the picture here .. you can see I bought the official Lion OSX !!!
Is there a way to upgrade or do I really have to reinstall my machine ???
Please help ....
Message was edited by: therealcave (add image)

Similar Messages

  • Cannot install safari 4.0.3 on mac os x 10.6

    hey i'm having trouble installing safari 4.0.3 so that i can use itunes 9. when i open the install package just before installation, it gives me a warning saying that i cannot install safari 4.0.3 because i need to run mac os x 10.5.8 even though i'm running snow leopard. called apple but they cannot help since my warranty expired 3 days ago. PLEASE HELP!!

    I see,
    If you right-click on the Quicktime app, and choose "Get Info" check to see if it's Version 10.0 if it is, its Quicktime X.
    I just checked, and the final "Gold Master" developer build of Snow Leopard was 10A432 so you are using an older build, and I really think you should get the final release - otherwise you won't be able to run Software Update in the future, and you might run into problems with your version.
    Regards

  • I cannot install a previously purchased version of acrobat 9 pro downloaded from the site.  Returns message at final install steps "invalid serial number." I had copied it and pasted it directly from "My Adobe".  What to do?

    I cannot install a previously purchased version of acrobat 9 pro downloaded from the site.  Returns message at final install steps "invalid serial number." I had copied it and pasted it directly from "My Adobe".  What to do?

    Hi hgratz,
    Considering 'invalid serial number' error for Acrobat 9, I would suggest you to please refer the KB doc link mentioned below:
    Error "Invalid serial number" | Acrobat 9 | CS4
    Let me know if that helps.
    Regards,
    Anubha

  • I RECENTLY HAD THE HARD DRIVE REPLACED ON MY MACBOOK PRO 8.1 UNDER WARRENTY NOW I FIND I CANNOT INSTALL I LIFE FROM MY ORIGINAL DVDS

    I RECENTLY HAD THE HARD DRIVE REPLACED ON MY MACBOOK PRO 8.1 UNDER WARRENTY NOW I FIND I CANNOT INSTALL I LIFE FROM MY ORIGINAL DVD  my original os was 10.6.7  now running 10.6.8

    Download & install this:
    http://support.apple.com/kb/DL1512

  • I had my hard drive cleaned and cannot install cs6 master collection from disk.  I am getting error message failed to initialize.  please download adobe advisor support.  I have a pc and am using windows 8

    I had my hard drive cleaned and cannot install cs6 master collection from disk.  I am getting error message failed to initialize.  please download adobe advisor support.  I am using a pc and have windows 8.  Please help.

    start at the top and work your way down applying applicable fixes until your problem is resolved.
    if cc (win):  https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
    if, your error is:
    "Installer failed to initialize. File not found." or "Installer failed to initialize. This could be due to missing files."
    first, rename OOBE Folder to OOBE.old.
    to find OOBE:
    64 bit win OS: Program Files x86\Common Files\Adobe\OOBE
    32 bit win OS: Program Files \Common Files\Adobe\OOBE
    mac os: HD>library>application support>adobe>caps
    mac os: USER>library>application support>adobe>OOB
    if that fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
    if you're using a dvd to install:
    copy the disc contents to a desktop directory and install from that directory.
    if you're using a mac:
    1. Try to Create a new user account in Mac with Administrator Priviledges.
    2. Login to the New user, Navigate to Mac HD> Application> Utilities> Adobe Installer folder, Locate products like Adobe Reader, Adobe Flash, Adobe Air and un-install them
    3. Navigate to User Library> Application Support> Adobe and move Adobe to Trash.
    4. Navigate to Mac HD> Library> Application Support> Adobe and move Adobe to Trash.
    5. Start the installation again.
    if everything applicable above fails, check your installation logs:
    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html

  • I have win xp version 202 service pack 3 had printer laserjet1010 installed but cannot install it an

    i have win xp version 202 service pack 3 had printer laserjet1010 installed but cannot install it again as error message is
    the installation file for this device is missing anecessary entry.this may be because the INF file was written for win95 or later

    helhaj,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HT201263 I have an iPod Touch which I've had for almost 4 years, with 32 GB of memory. I am unable to update it, and consequently cannot install any newer apps. I am very disappointed that I spent a lot of $$; now Apple wants me to spend $$ again to get a

    I have an iPod Touch which I've had for almost 4 years, with 32 GB of memory. I am unable to update it, and consequently cannot install any newer apps. I am very disappointed that I spent a lot of $$; now Apple wants me to spend $$ again to get a new one. As I mentioned, I am pretty upset. Does anyone know if there's a work around?

    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
    Identifying iPod models
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • I need to reinstall my Final Cut Express.  I have a version of 3.5 and then an upgrade to 4. Somehow I have managed to mislay the serial No for 3.5 so cannot install.  Does anyone know how I can resolve this.

    I need to reinstall my Final Cut Express.  I have a version of 3.5 and then an upgrade to 4. Somehow I have managed to mislay the serial No for 3.5 so cannot install.  Does anyone know how I can resolve this.

    If version 4 is an upgrade only, you will have to have the serial number of the 3.5 full version.
    If you can't find it try contacting Apple with your proff of purchase, they may be able to help.
    Al

  • HT1923 I cannot install the latest version of itunes as it instructed me to uninstall the version I had, which I did, but the "Apple mobile device support" will not uninstall.  This has left me with no itunes .  Help please

    I cannot install the latest version of iTunes as it instructed me to uninstall the version I had, which I did, but the "Apple mobile device support" will not uninstall.  This has left me with no iTunes and the new version will not install until I can uninstall all the old components.  Help please

    You could try downloading and installing 7-Zip (free) and downloading a fresh copy of the iTunesSetup.exe installer, unpack the installer into its components using 7-Zip then try installing AppleApplicationSupport again. It may still fail to install but you may get more useful error messages as to why not.
    tt2

  • I had a problem with connection with wireless printer, I had to delete. But I cannot install back. Printer HP officejet 6700

    Please anybody can help me with installation of HP officejet 6700 on MacBook Air.
    It stopped working, I could not find printer to connect, therefore I had to delete but I cannot install back again.

    So the printer is no longer shown in the System Preferences > Print & Scan window?  If you haven't already, you can power the printer off and on, then try to set up the wireless connection again and see if MBA recognizes the printer.
    You'll need to provide us with more info so we can try to help.

  • Cannot install iTunes on windows 7 64bit

    Okay, I like so many cannot install iTunes on Windows 7 64bit.
    Now Orginally I got a message saying something to the effect of:
    There was a problem with the install you do not have permission for something...
    Through some investigating my iTunes was being installed and removing all my permissions to view and/or modify files within that folder. Even if I was logged in as admin and installed as admin all the permissions would simply block me out.
    This kind of had a familar feeling as in the last few versions of iTunes I had to run as admin just to open it (this is really annoying by the way)
    So I searched the net and many people were saying to uninstall everything "Apple" and try again.  So I did that.  Now I have this new message:
    there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.
    And again I scoured the internet for a way to fix this.  I apparently am supposed to goto Control Pannel/Programs and Features and select Apple Software Update and select repair.  The problem is that no longer exists in my programs list since I removed it in the earlier step. iTunes still refuses to install spitting out the same error forever. I tried the Microsoft "fix it" tool which is supposed to remove the Apple Software Update incomplete uninstall (which is apparently the whole problem) but it doesn't show up in the list for "fixing".
    I am at a loss.  Why doesn't Apple fix this.  I cannot update my iPhone to the latest software in fear I may need to restore it. With no iTunes that is impossible.  I cannot change any of my music or do anything until this is resolved.  If/when iPhone 5 comes out I cannot get it either unless this issue is taken care of somhow.
    I searched for an installer for just the Apple Software Update program But it seems to not exist as a standalone thing (it would be useful if it were though). If it were perhaps I could install it again and then successfully remove/repair it and iTunes might install finally.
    Now I have had previous versions of iTunes working perfectly fine.  I do not recall which version I was using before I tried to update and fell into this abyss however.

    Yes b noir. I've tried running just "iTunes64.msi" from the command-line and while it didn't produce the same error "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender." it produced a different error in bold-type "iTunes Installer Completed" then "The installer encountered errors before iTunes could be configured...Errors occurred during installation. Your system has not been modified...Please run the installer again, or click Finish to exit". However, I discovered a wealth of options from the Windows Installer to try after typing "iTunes64.msi passive"...So I'll experiment some more when I have time.
    P.S. I'm becoming more convinced that Apple is putting new software out there to get it debugged which was a trick that MicroSoft always seemed to do:-)
    =============================
    Windows ® Installer. V 5.0.7601.17514
    msiexec /Option <Required Parameter> [Optional Parameter]
    Install Options
        </package | /i> <Product.msi>
            Installs or configures a product
        /a <Product.msi>
            Administrative install - Installs a product on the network
        /j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
            Advertises a product - m to all users, u to current user
        </uninstall | /x> <Product.msi | ProductCode>
            Uninstalls the product
    Display Options
        /quiet
            Quiet mode, no user interaction
        /passive
            Unattended mode - progress bar only
        /q[n|b|r|f]
            Sets user interface level
            n - No UI
            b - Basic UI
            r - Reduced UI
            f - Full UI (default)
        /help
            Help information
    Restart Options
        /norestart
            Do not restart after the installation is complete
        /promptrestart
            Prompts the user for restart if necessary
        /forcerestart
            Always restart the computer after installation
    Logging Options
        /l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
            i - Status messages
            w - Nonfatal warnings
            e - All error messages
            a - Start up of actions
            r - Action-specific records
            u - User requests
            c - Initial UI parameters
            m - Out-of-memory or fatal exit information
            o - Out-of-disk-space messages
            p - Terminal properties
            v - Verbose output
            x - Extra debugging information
            + - Append to existing log file
            ! - Flush each line to the log
            * - Log all information, except for v and x options
        /log <LogFile>
            Equivalent of /l* <LogFile>
    Update Options
        /update <Update1.msp>[;Update2.msp]
            Applies update(s)
        /uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
            Remove update(s) for a product
    Repair Options
        /f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
            Repairs a product
            p - only if file is missing
            o - if file is missing or an older version is installed (default)
            e - if file is missing or an equal or older version is installed
            d - if file is missing or a different version is installed
            c - if file is missing or checksum does not match the calculated value
            a - forces all files to be reinstalled
            u - all required user-specific registry entries (default)
            m - all required computer-specific registry entries (default)
            s - all existing shortcuts (default)
            v - runs from source and recaches local package
    Setting Public Properties
        [PROPERTY=PropertyValue]
    Consult the Windows ® Installer SDK for additional documentation on the
    command line syntax.
    Copyright © Microsoft Corporation. All rights reserved.
    Portions of this software are based in part on the work of the Indepe
    =================================

  • Cannot install windows 8 on Pavilion Elite M9600T (KX745AV-ABA) with Vista 64 BIT

    I cannot install windows 8 on my computer. I contacted Microsoft and he worked on it for three hours and said I had a graphics card driver problem.I am using a Nvidia GeForce 9800GT which came with the computer.  When I try to update to the latest driver (306.97) Which is on the Microsoft update site and also on the Nvidia site The screen says no signal and goes to sleep. I have been working with a Nvidia rep for a week now and he says it is not their driver that is causing the problem and that I should contact HP. I don't know what else to do. I removed the working Nvidia driver (SP41066) also and Tried to install windows 8 and recieved the same message "Windows installation was not successful" and returned me to Vista 64 Bit. I don't know what else to do. Can someone please help or am I just out of luck. Thank you,
    Gene
    This question was solved.
    View Solution.

    You're welcome mrchips108
    By the way up for one more go. I was finally able to find someone with a possible solution for you. the user yashoshah on the tomshardware forums had the problem:
    "Windows installation was not successful. Your previous version of windows will be restored. Please do not switch off your computer during this time"
    SOURCE: Windows installation not successful
    He fixed it by removing the HDMI cable and connecting to the monitor through DVI. After it was installed he went back to using HDMI.
    How is your video card connected to the monitor: what cable and what interface is on the monitor and what interface are you using on the video card? Perhaps the Microsoft rep you spoke to was partly correct about the video card being the problem. It might be that the driver built into Windows 8 has a problem with certain configurations.
    Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
    When a solution is found please mark the post that solves your issue.

  • Cannot install or uninstall Apple Mobile Device Support

    Trying to help a friend whose original problem was she was unable to connect her ipod. When I checked devices I found it was using the microsoft USB driver. I was unable to persuade it to use the apple driver so resorted to uninstall everything as per support instructions and re-install. Had problems uninstalling something (maybe AMDS) as it kept rolling back but after several tries it went from the uninstall list after some kind of complaint about the user not being an administrator (not true).
    Did not work when re-installed so tried uninstall/install again. This time it uninstalled cleanly but then failed on the install. I had a look around and most things seemed to be uninstalled OK but found that AMDS was still installed and registered as a service but had failed to start. I had no way of uninstalling it because it did not appear in the installed programs list. I thought that maybe if I could install it then I could then uninstall it. I read about splitting the install exe into seperate MSIs so did so and ran the AppleMobileDeviceSupport64.msi. This failed and when I subsequently ran it using msiexec I found the error was:
    DIFXAPP: INFO:   Could not open file C:\Windows\System32\DriverStore\FileRepository\netaapl64.inf_amd64_neutral_bf78 5db627c6d127\netaapl64.inf. (Error code 0x3: The system cannot find the path specified.)
    DIFXAPP: ERROR:  PnP Install failed. (Error code 0x3EE: The volume for a file has been externally altered so that the opened file is no longer valid.)
    When I looked in DriverStore I found that the directory netaapl64.inf_amd64_neutral_bf785db627c6d127 didn't exist but there was another netaapl64.inf_amd64_neutral but a different suffix. I thought this might be the problem so saw that pnputil could be used to remove it so did so but it still fails with the same error. At this point I thought I had better stop digging and seek help. Any suggestions other than re-install Windows 7 gratefully received.
    The environment is Windows 7 64 bit and the iTunes version is 64 bit 10.7.0.21.

    Just in case anybody comes across the same problem I thought I would provide an update. Unfortunately everything I tried failed and I finally had to restore the laptop to factory settings.
    I tried manually removing AMDS by removing the service with sc, deleting the files under Program Files (X86)\Common Files\Apple and cleaning up the registry using ccleaner. Tried the install again but it still failed with the same error.
    I then installed iTunes to another 64 bit Windows laptop (this failed claiming it was interrupted (how I love iTunes) but it had loaded AMDS). I then copied the netaapl64... directory from this machine to the failing machine (needing to take ownership and change permissions on the FileRepository directory). I then ran the install again and this time it worked !!! BUT... the AMDS service failed to start! At this point I decided to throw in the towel. It was either that or throw the machine through the window.
    If anybody else ever comes to me with an iTunes problem they will be quite surprised at the reaction of someone they think of as very mild mannered!

  • Cannot install oracle 9i database on windows XP

    Hi,
    I am a beginner to oracle. I cannot install the oracle 9i database on my computer. I cancelled the installation as it appeared to be hang at 48%. I wanted to remove the folders created during this and install it fresh. But i cannot delete the folder oracle as it gives the warning that "some files like oci.dll cannot be deleted. Make sure the disk space is not full or the disk is write protected" How can I delete all these files and start the installation fresh. Even if i start the installation keeping the previous files as it is and ignoring some errors during installation finally the installation is unsuccessful. Please suggest me how to delete all these files and to start a fresh installation.
    Thanks.

    I had a similar problem - was your install from CDs or download?
    I Downloaded 9i AND installed from the proprer Disk1, Disk2, Disk3 setup.
    To extract the .zip downloads (BIG MISTAKE) I used XP's built in extraction - XPs .zip extraction does Not stop on errors - it whips right past them.
    I attempted to re-extract from the .zips using Winzip - and it detected CRC errors in a couple files.
    After re-downloading Disk2 (where the CRC errored files were) via dial-up... Install went fine.
    If you did download, and used XP to extract - check your .zips with Winzip or a CRC supporting extraction program.
    With the exception of it just doesn't work anyways - Apache crashes and restarts every 10 minutes or so with MS Error box 'Send report' boxes - annoying, but that's another bug...

  • I cannot install CS2 or 3 on my MacBook

    Hello,
    I have an old PowerBook 1.25GHz that I had both cs2 and CS3 on, I just was given a barley used MacBook and proceeded to install CS2 first as I could not find he CS3 disk. It installed Photoshop and illustrator ok but did not install indesign. Then I found the cs3 disc so I tried to install that, everything went fine until it got to a certain point and and would not install more than acrobat and a few non essential programs. I tried everything to get it to work, finally decided to copy disc to desk top and do an install from my desktop, it would not copy, again to a certain point. I found the file I think it causing problems and did not copy it over but I cannot install now. When I click the install nothing happens.
    Any suggestions?

    Same here...I just got my new iPhone 6, I can't get my iPhone to update on itself. (Thought it was an internet issue)
    So I used iTunes to download the firmware, and start updaing.
    It seems promising at first but then sutck on "Error 6", I think the service is down maybe?
    Now my iphone can't reboot...can't retore either

Maybe you are looking for