Cannot install ACR 4.5

I have just purchased and installed CS3. After installing I checked for updates and there were quite a few of them. I downloaded and installed them, all but Adobe Camera Raw 4.5 update. I can download this file, but it will not install, no matter how I try to do it, either from the CS3 program or from the Adobe site. I am running XP Pro.
I am really interested in getting this installed as I want to work with RAW photos.
Thank you in advance for your help.

Thank you. I have "unzipped" the file, but I didn't take note of where I was supposed to put it. I have found where I think it is supposed to go, but not sure. The CS3 folder is in the Adobe folder, but there are other folders within the CS3 folder, as well as other files, do I put this file (Camera Raw.8bi) in as a file, or does it go into one of the folders?
Thank you again for your help.

Similar Messages

Cannot install ACR 8.4 on photoshop CC mac version - Error Code: U44M2P7

hello,
when i try to update photoshop CC's ACR 8.3 to 8.4 externally using installer titled "adobe-camera-raw_8-4_cc.dmg" i get an error message (please see below)
error log file says:
Photoshop Camera Raw 8.4(CC)
Installation failed. Error Code: U44M2P7
i cannot update to ACR 8.4 through creative cloud panel and this is why i am trying to update externally using a DMG file. i need nokia lumia 1020 lens correction support as a pro photographer and this is why i want to update to 8.4
thanks in advance for helps, suggestions for solving this.
best,
murat

ZIPped file was a camera raw 8.4 installer i found from the web. necessary places are:

Cannot install ACR 6.2 rc-help chris cox

i use umac i7 (ati radeon HD 4850) and os 10.6.4
i have photoshop CS5 installed with ACR 6.1. they work well.
when i attempt to install the ACR 6.2 rc i get message "update not applicable".
any suggestions (no sig response on camera raw forum.
thanks so much for being so helpful and very patient with many of us.
vince

cg88...
What version of QuickTime for Windows is installed?
I believe QT 5 or greater is needed although the download specs call for QT 4.1.2 or greater.
Another possibility is QT may need to be reinstalled.
...Ron
http://www.apple.com/support/downloads/appleworks622forwindows.html

I cannot install Adobe raw converter 5.7 on my copy of CS4. Can anyone help? Thanks

I cannot install Adobe raw converter 5.7 on my copy of CS4. Can anyone help? Thanks

Did you try downloading the update and try manually updating ACR?
Adobe - Photoshop : For Windows
Adobe - Photoshop : For Macintosh

Problem Installing ACR 6.7rc1

I tried to install ACR 6.7 rc1 on my Win7-64 bit system, and the first error I got was the installer told me that "Adobe Application manager is needed to update your product" It is either missing or damaged,- download a ne copy of Adobe Application manager or reinstall the product.
I downloaded the Application manager, and when I ran that, it failed as I got another error message "Installer failed to initialize" Please download Adobe Support Advisor to detect the problem.
So, I downloaded Adobe Support Advisor, and ran it and it told me it could find no problems, contact Adobe support for help, and to create a support package with a unique token number (00-74372-144712032012) to open a support case with Adobe.
I called Adobe technical support, and after talking to 3 individuals, and 2 hang ups with no return calls (they asked for my home number - why??), finally got someone who told me since it's a release candidate, Adobe support cannot help me, I need to post the issue on Adobe forums so it can be factored into the feedback from the community before Adobe officially releases it.
After searching the forums, am I the only one with this install problem??
Hank

Hank, all I can say is that it's a bit hard to read your post through the tears of laughter given the username you chose.
For what it's worth, I didn't have any problem installing the 6.7 RC. You might try running the installer As Administrator, but I don't have a huge amount of hope for that.
The actual plug-in .8bi files are in the package, but they don't have their final names... If you want to get down and dirty with the files you can dig into the download zip file, and you'll find two embedded zip files called Assets2_1.zip. Each of these is in a subfolder that will tell you whether it's the 32 or 64 bit version, and they contain the actual plug-ins (one for 64 bit, one for 32 bit).
On a 64 bit Windows system:
The file named 1002 that's 24,400 KB becomes the 64 bit plug-in: C:\Program Files\Common Files\Adobe\Plug-Ins\CS5\File Formats\Camera Raw.8bi
The file named 1003 that's 21,277 KB becomes the 32 bit plug-in: C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats\Camera Raw.8bi
-Noel

My notebook is GTX970M, cannot install after effect and preimer cs6

Hello guys,
I have some problem with adobe. My notebook have been updated to use GTX970M display card. But however I cannot install after effect and preimer CS6. Is it the application cannot support it or else?
Please help me to solve this problem.
Appreciate for your helping.

Unistall any ACR Betas on your system you may have used. Also simply run the Creative Suite Cleaner Tool and reinstall everything Adobe.
Mylenium

Satellite Z930-14F - cannot install Win 8.1 from SCCM 2012 R2 environment

Dear all,
Sattelite Z series laptops cannot install OS (win 8.1) from our SCCM 2012 R2 environment.
Either no installation is starting, or pxe boot aborted error is showed.
The environment is used to successfully install OS (win 8.1) on different other vendor computers (dell) and virtual machines (hyper-v and vmware).
I've tried both UEFI and CMS boot options and tried to switch off the secure boot. Please advice.
Also, i've read about the "SCCM installation package for Toshiba". Will it help in my situation or is it just driver packages for SCCM?
Best Regards, Evgeny.

I guess you are speaking about this Toshiba package:
http://www.toshiba.eu/services/on-demand/business-computing/sdp120gs-v/
I dont have much experience using such SCCM drive package but it definitely compatible with the Toshiba business notebooks. The Satellite / Portege Z930 belong to the business range and I think the package should be compatible.
This package seems to be for all IT administrators who manage devices on the corporate network with SCCM 2012 R2. Toshiba offers with the new Toshiba SCCM package a solution to integrate other notebook into an existing IT infrastructure quickly and smoothly and all Toshiba Driver and application packages and a demonstration task sequence are integrated.
However, it seems that you could get more details about this package directly from Toshiba [email protected]
By the way: The Win 8.1 installation requires the UEFI mode (in case the UEFI BIOS is available). But booting from another, external source requires the disabled secure boot option.
So maybe you should use the UEFI mode but should disable the secure boot option in order to boot from LAN.

Cannot install windows, starting to get really pissed off with this PLEASE HELP

ok, i'm starting to get agitated with this.
i cannot install windows XP, 2003, OR Longhorn on my machine.
right now, i have the following setup:
msi 865pe neo2 motherboard
intel p4 3.2ghz w/HT (factory HS/Fan currently)
1 dimm of PC3200 crucial DDR400
30GB maxtor HD plugged into primary IDE
pioneer dvd/cd drive as sencondary IDE
alps 3.5" floppy drive
antec true blue 480wt PSU
i do the following:
format with maxtor cd
boot from OS cd
start setup, reboot, continue
the farthest i can get is 'registering components/completing installation' i either get a blue screen stop error which isnt the same everytime, or it just locks up and doesnt do anything.
ran the memtest checker and get errors on test #4
i had a DIMM of kingston that gave the same errors, so i RMA'd it and got another. same errors, so i RMA'd again and got a Crucial stick. same errors.
so i RMA'd the motherboard since i figured it had to be that. and it improved from the problems i had earlier. (the problems i had before were worse before.)
below are my BIOS settings. SOMEONE WHO KNOWS PLEASE HELP ME!
advanced bios features:
quick boot - enabled
boot order - floppy, cd, HDD
full logo - disabled
s.m.a.r.t - enabled
num-lock on boot - enabled
floppy swap - disabled
floppy seek - enabled
save rom to HD - no
boot to os/2 - no
hyper threading - disabled
mps revision - 1.4
apic acpi sci irq - disabled
cpu l1 & l2 cache - enabled
bios cacheable - disabled
c000, 32k shadow - disabled
advanced chipset:
dram timing...
configure by spd - enabled
(i dont know what to set timing to, nothing anyone has since said helps)
integrated perfs:
usb controller - enabled (same errors if its disabled too so its not USB)
usb device legacy support - disabled
on chip IDE:
operate mode - legacy mode
ata config - pata only
sata keep enabled - yes (for sata drive i have, error either way)
pata channel selection - both
onboard ethernet, 1394, prmoise ide and audio all DISABLED
pc healt status:
cpu - 49°C/120°F (idle sitting in bios)
system temp - 28°C/82ºF
cpu fan - 2678rpm
nb fan speed - 6490rpm
vcore - 1.456 up to 1.502
3.3v - 3.232v
+5.0v - 5.003v
+12v - 11.680v
-12v - -11.743v
-5.0v - -4.826v
battery - 2.896v
+5V SB - 4.945
freq/voltage control
Dynamic OC - disabled
cpu ratio locked
dram freq - auto
spread spectrum - enabled
cpu bus clock - 200
ddr clock (grayed out) - 400
adjust agp/pci - 66.66/33.33
cpu vcore adjust - no
cpu vcore (grayed out) - 1.5500v
ddr power voltage - 2.65v
agp power voltage - 1.50v
SOMEONE PLEASE HELP ME!!!!!
i'm running out of time, money, patience.
if it cant be solved i'm going to set myself on fire!

Quote
Originally posted by REILLY875
Do NOT try the 250 Watt PSU!!, As "Wonk" said if you happen to Blow it, the PSU will most likely Take out the Mo-Bo with it! And maybe the CPU to, due to the Voltage Spike you would get ...I would not put to much Credence into the fact that as of now the +12V and the +3.3V Rails are reading a little low,(I say this because it is indeed a ANTEC), as this could be the Monitoring Hardware, or the Software that might be reading wrong....If I where you I would First set the Memory Timings Manually to 3-4-4-7-8, And up the DRAM (VDIMM) Voltage to 2.7 Volts, and if it still wont Load, I would Definitly try a different DIMM Slot, and Rince and Repeat .....If you dont mind me asking , Why are you running with just 1 Module?....Is it on purpose or are you saving up for More?................Sean REILLY875
yea, i dont plan to run the 250. im gonna wait for the new 480.
thanks for the info about ram timings as well. i havnt gotten any solid answers about what to set it to.
even with new mobo and ram, i'm getting errors in memtest86 #4 test as i always have. i've tried different slots with same problems.
i only have one module because i dont want to waste anymore money on a non-working system. once i get it up and running i'll add another 512.

Cannot install Windows 8.1 via Boot Camp on MBPr 13" Early 2013; tried almost everything.

Hi guys,
yesterday, I decided to install Windows 8.1 on my Mac using Boot Camp. I tried to install it, but the first attempt ended into booting to the screen, where it says "Cannot find any bootable device" or something like that. So I googled it up and then tried the EFI Boot. The EFI Boot booted into the Windows installation properly, but I cannot choose the partition I want to install it on. I tried partitioning it in Disk Utility using Tuxera to NTFS, I tried formatting it in the installation itself, always restarted between the processes, I tried to delete the partition and create a new one in the installation, but no luck. I am still stuck on the error "Cannot install Windows on MBR partition. Please, choose a GPT partition". I have a 256GB SSD disk. I browsed the problems and solutions for 3 hours, but no luck. None of the solution helps. The only solution that would work I guess is if I don’t boot into EFI, but into the BIOS installation. But when I do that, I get the "Cannot find any bootable device", so a dead end here. I also tried the tips where they say to remove the USB stick when the Windows installation starts, but didn’t help either.
I am installing using a bootable USB drive, I do not have a Superdrive and cannot even lend it or something like that.
I am really desperate, can anyone please help me?
Thanks in advance,
DavidKop_

Some people have been successful installing 8.1 (me, for instance) despite it not being supported. However this seems to be hardware dependent.
I would have expected the normal WININSTALL option to be available on a Bootcamp-created USB, not just the EFI boot option.
It really depends on whether Bootcamp is creating a hybrid MBR when it creates the Bootcamp partition. Some later model Macs do not. On the Macs that do not create the hybrid MBR Windows may install in EFI mode.
If you remove everything and stretch the Macintosh HD back to the full size of the disc again then reboot and when the system restarts begin the Bootcamp installation again but do not let it restart at that time, you can then run the following code in the terminal and report its output we will be able to see if a hybrid MBR has been created (this is after the partition has been created by Bootcamp, but before it reboots).
sudo fdisk /dev/disk0

Pc cannot install purchased photo elements 13. Error message appears: File archive part missing from Adobe Photo Elements 13. You need all parts in the same folder in order to extract Adobe Photoshop 13. please download all parts.

Cannot install my download due to above error message.

Hi revbos,
Apologies for your incovinience.
Requesting you to please go to https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us. When you click on download button (after selecting your OS details), it should open a new browser window (which will launch the Akamai installer automatically). Please cancel any installation or error shown.
The newly opened browser page will look something like this:
As highlighted, please click on these links (one by one) and see if it downloads the required files. The downloaded files will be compressed with 7z format. If you have some extracting tool (like WinZip) try extracting it. If you don't have it, download 7z. Its a free utility from Microsoft. Once downloaded and installed, you will be able to extract file and locate the PSE setup.
Please let me know if you face any issues.
~Surendra

I have downloaded/paid fora plug in from adobe site (cracked backgrounds) it told me ti install creative Cloud which i have done but i cannot install the plug in into lightroom5 via plug in manger to use the backgrounds...please help as this is the firs

Ihave downloaded/paid for a plug in from adobe site (cracked backgrounds) it told me ti install Creative Cloud which i have done it shows the plug in on there as downloaded but i cannot install it into lightroom 5 to use? i have tried the plug in manger but it says cannot install plug in..also downloaded the Adobe extension manager cc but that does not add either....Please help first time i ave tried to install a plug in !!!!!! Lucy

Dear Lucy
Please remember to unzip the file from your Downloads folder in order to load them into Lightroom.
What is the error in Lightroom?
Did you read the 'Where to Find it' section?
Thanks,
Krystal - Add-ons team

After IOS 8 update, cannot install or update app

As my subject mentioned, after the ios 8 update, i cannot install or update app. I have done everything like calling the tech support, follow their instructions etc.. Some of the things i had done were
Soft reset ipad
Hard reset ipad
logout of itune store and login
delete everything on ipad and restore from itunes.
All these doesn't work and the problem keeps coming back again. This is frustrating that Apple would release an update like this that would break my ipad air. On top of that, quite a lot of app are not working eg zinio, evernote. My ipad air has been in this mode eversince the update release and i had mostly given up to resolve it. For all other ipad owners, if you want to avoid this anguish don't update to ios 8.

You are not alone. Here's one thread
Why can't I download or update apps on iPad running iOS 8
If you have the WSJ app installed, delete it and see if that fixes things. It immediately fixed it for me, but not for all people with the problem.

Unisphere Host Agent cannot install on Windows 2012 R2 Core

Cannot install EMC Unisphere Host Agent on Windows Server 2012 R2 Core server.
When trying to install into Hyper-V 2012 R2 I get an error informing of the requirement for Feb 2013 updates to Windows 8 and Windows server 2012.

Cannot install EMC Unisphere Host Agent on Windows Server 2012 R2 Core server.
When trying to install into Hyper-V 2012 R2 I get an error informing of the requirement for Feb 2013
updates to Windows 8 and Windows server 2012.

Cannot install Firefox. WHen I click on the link to install, it takes me to an "error loading page" notice. My network connection and internet access are normal with Internet Explorer, so this is not the issue. Some kind of conflict with my settings or pe

Cannot install Firefox. When I click on the link on the Mozilla website, it goes to an "error loading page". My network connection and Internet Explorer are fuctioning normally.
== computer was recently wiped clean and am now reinstalling all previous software and applications ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)

None of the stuff in " http://kb.mozillazine.org/Locked_or_damaged_places.sqlite " helps. I have tried and tried and I have even wipe the computer clean still didn't help. I got the same problem as he/she has got in the first posted. Can add some web pages but not all the web pages I want.. I should have never updated to 3.6.13... That's when it all started for me, from that version..... Now Version 3.6.14 is out, I was hoping the version 3.6.14 might would fix the problem wrong again....
Funny thing is i can not even Bookmark Firefox.com!!!!!...lol
So any ideas on how to fix it other than the link giving would help.
Thanks.

I cannot install or uninstall itunes. I get error message 2324?????

I cannot install or uninstall itunes. I get error message 2324?????

You might need to run the Windows installer cleanup utility....start the troubleshooter for assistance at the following link: http://support.microsoft.com/kb/2438651/

Cannot install ACR 4.5

Similar Messages

Maybe you are looking for