Cannot install Activex control for WVC54GC / no puedo instalar Control Activex para camara WVC54GC

Hello everybody,
I log on the internet address for my camera, hit the view video link and after clicking on "install ActiveX control" I get a pop up security alert saying "Windows has blocked this software because was unable to determine origin". I have tha latest firmware installed and camera is working fine but I cannot access my camera from my laptop when I´m away due to this issue. Thanks in advance for your help.
Hola,
Cuando ingreso a internet y hago click en el enlace de "ver video" y luego click en "Instalar control ActiveX" me sale lugo un mensaje de: "Windows bloqueó este software porque no puede comprobar el fabricante". Gracias por su ayuda.

Before you try to install Active X Control on your PC, Disable the Firewall and Antivirus on your Computer, and then Lower down the security of your Internet Explorer.
Opend Internet Explorer....
Tools
Internet Options
Click on the Security tab
Under "Select a zone to view or change security settings" select "Internet"
Below click on "Custom Level"
Under "Download Unsigned Activex Control" Select "Enable"
Click Ok and again Ok.
Now try to View your camera, if you get that prompt to install Active X, then you need to allow it. Once installed Active X on your computer, you will be able to view your camera.

Similar Messages

Cannot install Grid control 11g because of repository creation failure

I cannot install Grid control 11g (on AIX6.1 and 11.2.0.1 database) because of repository creation failure with following log emschema.log.CREATE
2012-10-29 17:44:49,729 [Thread-190] ERROR emschema.17oypu8dqqrf7 - ERROR:FATAL Configuration Exceptions
Execution Exception
null
2012-10-29 17:44:50,162 [17oypu8dqqrf7] ERROR emschema.17oypu8dqqrf7 - Schema Action Failed
2012-10-29 17:44:50,163 [17oypu8dqqrf7] ERROR emschema.17oypu8dqqrf7 - java.lang.Exception: The last RCUModel exit status code is not SUCCEEDED.
2012-10-29 17:44:50,164 [17oypu8dqqrf7] ERROR emschema.17oypu8dqqrf7 - Schema Action Failed
2012-10-29 17:44:50,167 [17oypu8dqqrf7] ERROR emschema.17oypu8dqqrf7 - Running RCU Failed with Exception Trace
The last RCUModel exit status code is not SUCCEEDED.
and rcu.log:
RCU Logfile               : /ugp1apl/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager/m_102912_0530_PM/m_102912_0530_PM.CREATE/rcu.log
RCU Checkpoint Object               : /opt/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager//RCUCheckpointObj
Component schemas created:
Component               Status     Logfile
EM Repository Creation Configuration          Failed     /ugp1apl/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager/m_102912_0530_PM/m_102912_0530_PM.CREATE/em_repos_config.log
EM Repository Init Configuration          Success     /ugp1apl/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager/m_102912_0530_PM/m_102912_0530_PM.CREATE/em_repos_init.log
EM Repository Common          Success     /ugp1apl/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager/m_102912_0530_PM/m_102912_0530_PM.CREATE/em_repos_common.log
2012-10-29 17:44:49.887 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: Repository Creation Utility - Create : Operation Completed
Database has 11.2.0.1 version and setup according installation guide(init parameters and so on...), what's wrong?
Edited by: mariok on Oct 31, 2012 2:11 AM

In install guide is written: http://docs.oracle.com/cd/E11857_01/install.111/e15838/install_em_exist_db.htm#CIAIGDIH
„No environment variable specific to Enterprise Manager Grid Control needs to be set prior to installation. The ORACLE_HOME and ORACLE_SID variables should not be set; Oracle directories should not appear in the PATH.“
When I'v set up following variables everything went fine:
ORACLE_HOME=/opt/oracle/product64/11.2.0.1
ORACLE_SID=UAGRID
PATH=/usr/java6_64/bin:/opt/oracle/product64/11.2.0.1/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/lbin:/root/MSP/bin:.:/usr/local/bin:/u1/oracle/SCRIPTS:/opt/oracle/product64/11.2.0.1/OPatch

Cannot install latest updates for Bridge and Photoshop CC. Get the following message: Update Failed. The download appears corrupted. U43M1D207.

Cannot install latest updates for Bridge and Photoshop CC. I get the following message: "Update Failed. The download appears corrupted. U43M1D207."
I have tried to install at different times over three different days with the same result each time. My version of Bridge now no longer shows DNG files except as an icon. The update is supposed to install Camera Raw version 9.

I had the 204 version of your error using the direct download links proved on this thread solved my problem.. hope you have same success... had to log off/in cloud manager before it showed all apps updated
https://forums.adobe.com/thread/1825014

I cannot install the trial for Acrobat XI Pro. The file downloaded fine, but it does not open. What can I do?

I cannot install the trial for Acrobat XI Pro. The file downloaded fine, but it does not open. What can I do?

For Windows:
http://trials2.adobe.com/AdobeProducts/APRO/11/win32/AcrobatPro_11_Web_WWMUI.exe
For MAC:
http://trials2.adobe.com/AdobeProducts/APRO/11/osx10/AcrobatPro_11_Web_WWMUI.dmg
ACROBAT XI

Error. Cannot install public key for specified user

I'm getting "Error. Cannot install public key for specified user" when trying to add a public ssh key for a service processor user on a V20z. I've tried it for different users and still get the error. The same operation works fine on a V40z. Any help would be appreciated.

That would be great if the resolution was that simple. I am using a public key I generated using the putty key generator. Below is the key I would use if I got that far. However I get an error on the "ssh authentication publickey" attribute so I never get the chance to enter a public key. What code version and hardware version are you running that this worked on?
AAAAB3NzaC1yc2EAAAABJQAAAIEA2h00RCKBbpbrTWSe/3TYAvRpkJz7tLwQDCf9
4fDJUWUGrmxXHeomuBhNGZh7tyfFjRL2CKY6nWmFyKN/eDm0PF4IWhhCArzOPVDu
q7Nu2y/pD8wWH8dH4a3zRpkLSekNJtH6lzuqmY0zqz9TnZlpS6g4LI1a+lOGSmhU
/HySw9s=
ciscoasa(config)#username test nopassword privilege 15
ciscoasa(config)#username test attributes
ciscoasa(config-username)#ssh ?
configure mode commands/options:
Hostname or A.B.C.D The IP address of the host and/or network authorized to
                       login to the system
X:X:X:X::X/<0-128>   IPv6 address/prefix authorized to login to the system
scopy                Secure Copy mode
timeout              Configure ssh idle timeout
version              Specify protocol version to be supported
exec mode commands/options:
disconnect Specify SSH session id to be disconnected after this keyword
ciscoasa(config-username)# ssh
ciscoasa(config-username)# sh ver | in Ver
Cisco Adaptive Security Appliance Software Version 9.1(1)
Device Manager Version 7.1(1)52
ciscoasa(config-username)#

Cannot Install Graphics Driver for windows 7 64 bit...

Hi... I cannot find a suitable amd driver setup file for my windows 7 64 bit machine of HP.. Can anyone help??!!

Hi:
Please see my reply to your other post at the link below...
http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Cannot-Install-Graphics-Driver-for-windows-7...

Cannot install xmlp plugin for word 2007 on Windows 7 64bit

I cannot install xmlp plugin for word 2007 on Windows 7 64bit. I keep getting a "java runtime not installed" error. I have applied the latest updates to word. Is there a fix to this?

Hi,
Even if you use a 64bit OS, the office version could be either 32bit or 64bit. Which one do you use? If already installed a 64bit version Office, try to switch to a 32bit one, because it will work fine and might solve your problem too.
*[url http://www.java-forums.org/blogs/advanced-java/collection/]Java collection*

Cannot install Flash Player for Firefox

I am running Windows XP HE with SP4. IE and the latest version of Firefox are installed.
In both IE and Firefox, on attempting to install Flash Player with the standard link, I get an error message in a small window opens, title "getPlus+(R): Error," text "Unable to load a GUI," "OK" box. I got around this by locating a standalone installation for IE, which downloaded an installation file to my computer. However, this does not work in Firefox, even when obtaining access to that link from Firefox. The file executes, but Flash Player still shows as not installed in Firefox.
I cannot find any separate standalone installer for Flash Player for Firefox.
This error message appears to be generated by the Adobe Installer, a getPlus product. My thought was to uninstall the Adobe Installer, and try to start over. However, the Adobe Installer shows up in the list of installed programs reached through Control Panel, BUT clicking the button to uninstall the program does nothing. The program remains listed. I cannot find a location for the Adobe Installer program on my disk drive.

As I said in my first message, Adobe DLM appears in the "Add/Remove Programs" dialogue box, but clicking the Remove button doesn't do anything. The screen flickers for a couple of seconds, and Adobe DLM remains listed as an installed program. There is no installed program listed under the description getPlus or NOS.
I found useful information at http://www.findmysoft.com/news/Patch-to-Fix-Critical-Adobe-Download-Manager-Vulnerability- Released/ . Not to put too fine a point on it, information at various locations shows that the DLM has been a troublesome program.
IE did not list Adobe DLM, getPlus, or NOS as an addon. Firefox listed "getPlusPlus for Adobe 16263" as a plugin. There was not other extension or plugin listed under Adobe DLM, getPlus, or NOS.
Based on the information at the link cited above, I tried the following. First, in Firefox, I disabled the getPlusPlus for Adobe 16263 plugin. Removing it was not an option. First, using services.msc, I disabled the getPlus Helper service. Removing it was not an option. Third, I deleted the directory c:\Program Files\NOS and its subtree. I did not find anything relevant in the Application Data directories.
I then went to the link on the Adobe Web site to install Flash Player. (I know, it's already installed, but I wanted to see if the DLM would now function.) This time, the first thing that happened upon clicking the link to install it was that the site completed a new installation of DLM. However, on proceeding to the installation of Flash Player itself, I got the same error message noted above, "A GUI could not be loaded." So nothing changed. Opening services.msc again, I noted that the getPlus Helper service had been reinstalled, and was no longer disabled. The c:\Program Files\NOS directory had been recreated. I tried manually starting the getPlus Helper service, and trying the installation again through the Adobe Web site. Same result, no help. And note that DLM is not being cleaned up automatically as part of this process, as is supposed to happen.
I'm thinking that a previous installation of DLM left behind some corrupted relic that is preventing it from running properly. Very likely an incorrect registry entry. But good luck finding that one without help.
NOS Micro has a link to "Contact Our Support Team" at http://www.nosltd.com/index.php/support . Maybe as a last resort see if they would respond? Note that I can't locate a way to get support from Adobe except by paying $39.95 per incident for telephone support.
Thanks!

I cannot install the component for QuickTime to convert videos done by a Sony video camera. My iMac tells me that software is designed for previous versions of Os x. Any ideas?

I cannot install the QuickTime component for MPEG-2 to read and covert video files created by Sony video cameras. My iMac tells me that the software is designed for previous versions of OS X.
Any ideas?

Ok, so after like 4 days of going through all these different issues, I figured out that several programs weren't downloading, and it was an issue with my wireless connectivity messing up the digital signatures, so if you plug in your comp to the modem and delete your temp files, it should start to work!

Windows XP/64bit cannot install MPA drivers for C5

I'm successfully using Nokia OVI Suite for my C5 on windows XP / 64 bit.
But The OS cannot install the MPA drivers for accessing the device directly in Windows Explorer. Every time I connect the mobile using "mass storage" or "data transfer" mode (don't know the correct names - I'm using the german interface), the OS tries to install the drivers and finishs the "New Hardware"-dialog with the following message:
There was a problem installing the hardware: C5-00
An error occured during the installation of the device.
The class installer has denied the request to install or upgrade this device.
Please help!
Kind regards,
Doris C.

hi dunchilla,
Could you please try this once?
1. Uninstall Ovi Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove program if anything is there.
2. Delete the files from here If anything is there
C:\Documents and Settings\User\Application Data\Nokia\Ovi Suite
C:\Documents and Settings\user\Local Settings\Application Data\Nokia
C:\Documents and Settings\All Users\Application Data\OviInstallerCache
3. Please search and download MSI clean up utility from microsoft website
Once installed please select the programs related to Nokia and click remove.
Restart Computer.
Then download from microsoft website and install Windows Installer, so that the installer is upto date.
4. Restart the PC
5. Download and Install latest OviSuite http://europe.nokia.com/support/download-software/nokia-ovi-suite
6. Connect the device and select pcsuite mode
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Cannot install the software for my new printer

I just purchased this printer yesterday and have been working all this time trying to get the software installed. I've used the CD that comes with the printer. I've used the online software and used the assistant to download and install. I've gone through many of the forums here and troubleshooted with all I've seen. I keep getting the error message cannot install. I'm getting frustrated at something so simple in the past has become a chore. I have only used HP products for my scanners/printers and I'm afraid my next step may be to pack this unit up and take it back to the store for a different brand. Please help.

Hello , Welcome to the HP Forums, and thanks for posting. I understand you are having an issue installing your new HP LaserJet Pro M177fw MFP on a Windows 7 computer. I'd love to help you with this. I would recommend first clearing the temp files on your computer to make sure there isn't anything there that is preventing the installation. Here are the instructions: Restart your computer.Click on your Start Menu.In the Search bar, type in %temp%, then press enter. Your Temp folder will open.On your keyboard. Select Ctrl + A (this will select all files)Hit the delete button on your keyboard to remove all temp files.Then I would recommend doing a clean boot of your computer. This will turn off any non-microsoft programs that are loading when you start your computer, to avoid any conflicts with the installer. You can follow the steps here to do a cleanboot: How to perform a clean boot in Windows Once the computer has started up again, try downloading and installing from the HP website: HP Color LaserJet Pro MFP M177 Series Full Software and Drivers If you are still unable to install the printer, try running the MS Fix It tool. This is a tool supplied by Microsoft to resolve Operating System issues, and this version is specific to issues when installing or uninstalling: Fix problems that programs cannot be installed or uninstalled Please respond to let me know if this helped to resolve your issue!Good luck.

Cannot install the updates for CS5.

Greetings. I re-installed CS5 when I changed the hard drive of my PC. Now I cannot install the updates although in my old setup, I had no problem and was able to update to CS5.5.
Should I download and install CS5.5 manually on top of CS5?
Or should I remove CS5?
Will my CS5 licence work for CS5.5?

Each time I turned on the computer I would get the message that several updates to Photoshop were available but could never download them or install them. Following your March 17th instructions did not do the trick. However after some trials and errors, I managed to get the updates to cs5 installed (unfortunately, I don't know how I managed!). I still cannot get cs5.5 but it's OK.
Someone from Adobe called me and suggested that I upgrade to cs6 at a special price but I declined the offer, thinking that at some point in the future, I may move to CC.
Thank you for your help, it lead me to a solution.

Cannot install ICloud Control Panel to Laptop using Windows 8

I cannot install the ICloud Control Panel on our Laptop.
Tried several times to install but get an error code at the
very end of the install. Not sure why.
Installed perfectly on another PC.

I have the same issue on my new laptop running Windows 8.1. When trying to install iCloud Control Panel 3.1 it stops at 'Updating component registration' and displays the alert 'the process cannot access the file because another process has locked a portion of the file'. Can anyone help?

Cannot install LAN driver for my "KT6 Delta Series" motherboard

I've got this motherboard (KT6 Delta Series). Bought it second hand recently and I haven't got the original MSI driver CD. I downloaded all the drivers from the MSI website (http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=474&kind=1) but I'm not able to install the driver for my onboard LAN.
I just get a yellow dot on the ethernet controller under unknown devices in my device manager. When I try to update driver from device manager by searching the folder where I unzipped the driver, I just get a message saying something like "no driver could be found for this device in the selected folder... will you connect to Windows Update to search for a driver...?". I've also tried to install it the hard way by selecting "from floppy disc" and browse for the "b44win.inf" file inside the "WinXP" folder in the unzipped driver folder... but I stilll get an error message... saying something like "can't find any information of the hardware in the selected folder"... it's a bit difficult for me to describe the messages correctley because not English Windows version.
I've downloaded both LAN drivers for this card from MSI download site (http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=474&kind=1). Both "Broadcom 5788 LAN Drivers" and "Broadcom 4401 LAN Drivers" and non of them will install on my system. I've also tried downloading from the Broadcom website (http://www.broadcom.com/drivers/downloaddrivers.php). NON of them will install (
I've just formated my harddrive with fresh Windows XP install... The only software already installed is drivers for my motherboard and AGP card. No other software that can make any conflicts. When I connect a network cable to the onboard LAN the yellow light goes on so it seems the card itself is working.... but where can I get a driver that will install???
I've also tried connecting another network card (realtek 10/100) and connected my ADSL internett through it... and used the MSI Live Update utility... but still no luck... the only network driver it gets is the one for my reltek card :-(
Any suggestions???
I use Windows XP Professional SP2. How do I install the drivers for my onboard LAN???
Best regard.
Tor-Atle Kindsbekken

Quote from: osnavi on 05-November-05, 20:02:09
"...so my onboard Broadcom 4401/5788 controller thinks it is a 3COM controller instead of a broadcom controller..." Think it shouldn't be possible since basic data should be written in a kind of ROM. Now, if that could happen, it should be possible to reverse it the same way you did to overwrite that data.
I belive you are right... but I can't reverse it the same way I did when overwrite the data... because I'm not able to install the driver :( I cannot install the driver at all in Windows XP. In Windows ME it's possible to force the installation of the driver... but it does not work. It moves from unknown devices to network controllers... but it gets a yellow dot... and is not working. Every time I boot Windows ME I get a message reporting that something is wrong with the broadcom ethernet controller :(
I belive the only way I can reverse it is to replace my harddrive with another... with Windows XP and drivers for my card is already installed on the harddrive... the same way as I did when overwriting the rom file(s) with data from my Asus board... but I can't make such a harddrive when the drivers won't install on my card :(
I maybe think this also has happend to the onboard Audio controller... and maybe the chipsett also :( The audio controller works perfectley eith the MSI C-Media drivers... but when I run MSI live update... I get drivers for the C-Media device... but also drivers for "VIA AC97" audio controller can be downloaded from the MSI Live Update Utility... The "VIA AC97" is the audio controller on my Asus board... so I belive it has happened here also... and maybe also to the "VIA 4in1" chipset... but this is the same "VIA KT600" chipset as on my Asus board. When updating my Via 4in1 driver, I just get an option to update the inf file. But normaly on "Via 4in1" drivers on other boards I know, there shold be installed drivers for PCI, IDE and AGP. Is it the same way for you guys with this motherboard? Is it only the "Inf file" to update for you guys also?
What I think is most frustrating here is that things like this cab happen. This can happen to everybody. Many times I've switched harddrive from one computer to another... and I've never experienced anything like this before. This time I was not planing to boot the harddrive at all... just format it... but forgot to set the right boot order... so the harddrive booten... and that's all it takes to "destroy" my board. Shouldn't these ROM files be a littlebit more difficult to overwrite, you think? Why doesn't MSI writeprotect their ROM files or anything... to make them a littlebit more difficult to destroy...?
Well... I'm still interested in advices on how to "restore" my motherboard data to the original values... and remember... clear CMOS and update BIOS is not enough :(

Cannot Install CC Update For August

I cannot install CC destop update for August.
It says there is an issue: it says another version of creative cloud is running on my desktop. Quit it and retry.
Do I uninstall the present creative cloud and reinstall?
It won't update.
Thanks

Hi Clare1950,
This happens when there is a service of creative cloud running in background and generally when you restart your machine and run the update it works.
Please restart your machine and run the update and it will work.

Cannot install Activex control for WVC54GC / no puedo instalar Control Activex para camara WVC54GC

Similar Messages

Maybe you are looking for