Cannot install AnyConnect Secure Mobility Client 3.1.04063
OS Windows 7 Home Premium 64 bit.
The message I get is: Failed to install AnyConnect Secure Mobility Client 3.1.04063 because the AnyConnect client service is not responding. A VPN connection cannot be established.
I have been working on this for several weeks. I have de-installed VPN, removed all CISCO folders and removed all registry entries. I tried all three major browsers downloading it from my work site.
I have another Windows 7 Home Premium 64-bit machine (fresh install) and it does download and install the software correctly. So it is not Anitvirus or Firewall as both machines are plugged into the same router.
The software reports that it was not installed, but the executable is there and the service is there, but I can't start it.
What other information do I need to provide to help troubleshoot this issue?
I've seemed to have taken a step backwards. I got it up and running then reinstalled Spybot Search and Destroy. The problem is with the hosts file. I had two versions: one was 450K the other was 900K. The 900K version was a result of an import of sites so as to stop ads from showing when I browsed. Somehow this version re-established itself as the hosts file.
Also what happened is that I could not launch IE. I had to fall back to the last system restore point which was the installation of VPN. So it got uninstalled.
I have since cleaned out all of the 900K backup versions of the hosts files, but following my own instructions, I can't get it to install. Same error message. The first time I had success, I did not have to turn off anti-virus. However, I decided to try your method and I still get the same error message.
I do think it is somehow tied up with the hosts file and with the services. I don't know how the two are related.
If I ever get it working again, I will make a system restore point immediately.
Similar Messages
-
Install anyconnect secure mobility client 3.1 failed on Mac 10.8.2
Hi guys
I tried to install cisco anyconnect secure mobility client 3.1 on my Mac laptop, the OS version is 10.8.2,
though above error occured, the client app canbe found at /Applications/Cisco , but I cannot use it to connect to my VPN network.Attached the install logs , hope it's helpful
Mar 5 23:21:07 localhost Installer[1345]: Cisco AnyConnect VPN Client 3.1.02026 Installation Log
Mar 5 23:21:07 localhost Installer[1345]: Opened from: /Users/rioliu/Downloads/cisco_anyconnect-3.1.02026.pkg
Mar 5 23:21:07 localhost Installer[1345]: Product archive /Users/rioliu/Downloads/cisco_anyconnect-3.1.02026.pkg trustLevel=202
Mar 5 23:21:12 localhost Installer[1345]: InstallerStatusNotifications plugin loaded
Mar 5 23:21:15 localhost Installer[1345]: ================================================================================
Mar 5 23:21:15 localhost Installer[1345]: User picked Standard Install
Mar 5 23:21:15 localhost Installer[1345]: Choices selected for installation:
Mar 5 23:21:15 localhost Installer[1345]: Install: "Cisco AnyConnect VPN Client"
Mar 5 23:21:15 localhost Installer[1345]: Install: "(null)"
Mar 5 23:21:15 localhost Installer[1345]: cisco_anyconnect-3.1.02026.pkg#vpn_module.pkg : com.cisco.pkg.anyconnect.vpn : 3.1.02026
Mar 5 23:21:15 localhost Installer[1345]: cisco_anyconnect-3.1.02026.pkg#anyconnect_config.pkg : com.oracle.CiscoAnyConnectVPNClientConfig : 3.1.02026
Mar 5 23:21:15 localhost Installer[1345]: ================================================================================
Mar 5 23:21:15 localhost Installer[1345]: It took 0.00 seconds to summarize the package selections.
Mar 5 23:21:15 localhost Installer[1345]: -[IFDInstallController(Private) _buildInstallPlan]: location = file://localhost
Mar 5 23:21:15 localhost Installer[1345]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Users/rioliu/Downloads/cisco_anyconnect-3.1.02026.pkg#vpn_module.pkg
Mar 5 23:21:15 localhost Installer[1345]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Users/rioliu/Downloads/cisco_anyconnect-3.1.02026.pkg#anyconnect_config.pkg
Mar 5 23:21:15 localhost Installer[1345]: Set authorization level to root for session
Mar 5 23:21:19 localhost runner[1348]: Administrator authorization granted.
Mar 5 23:21:19 localhost Installer[1345]: Will use PK session
Mar 5 23:21:19 localhost Installer[1345]: Starting installation:
Mar 5 23:21:19 localhost Installer[1345]: Configuring volume "Macintosh HD"
Mar 5 23:21:19 localhost Installer[1345]: Preparing disk for local booted install.
Mar 5 23:21:19 localhost Installer[1345]: Free space on "Macintosh HD": 388.55 GB (388547031040 bytes).
Mar 5 23:21:19 localhost Installer[1345]: Create temporary directory "/var/folders/0y/kj2nvp7j4yq_sy9m3cxn52wr0000gn/T//Install.1345Wuq5ze"
Mar 5 23:21:19 localhost Installer[1345]: IFPKInstallElement (2 packages)
Mar 5 23:21:19 localhost Installer[1345]: Using authorization level of root for IFPKInstallElement
Mar 5 23:21:19 localhost installd[345]: PackageKit: ----- Begin install -----
Mar 5 23:21:19 localhost installd[345]: PackageKit: request=PKInstallRequest <2 packages, destination=/>
Mar 5 23:21:19 localhost installd[345]: PackageKit: packages=(
"PKLeopardPackage ",
"PKLeopardPackage "
Mar 5 23:21:19 localhost installd[345]: PackageKit: Extracting file://localhost/Users/rioliu/Downloads/cisco_anyconnect-3.1.02026.pkg#vpn_module.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandboxManager/1.sandbox/Root, uid=0)
Mar 5 23:21:20 localhost installd[345]: PackageKit: update_dyld_shared_cache -overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandboxManager/1.sandbox/Root
Mar 5 23:21:34 localhost installd[345]: PackageKit: prevent user idle system sleep
Mar 5 23:21:34 localhost installd[345]: PackageKit: suspending backupd
Mar 5 23:21:34 localhost installd[345]: PackageKit: Executing script "./preinstall" in /private/tmp/PKInstallSandbox.sjtRin/Scripts/com.cisco.pkg.anyconnect.vpn.yM72U9
Mar 5 23:21:34 localhost install_monitor[1359]: Temporarily excluding: /Applications, /Library, /System, /bin, /private, /sbin, /usr
Mar 5 23:21:34 localhost installd[345]: PackageKit: Shoving /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandboxManager/1.sandbox/Root (4 items) to /
Mar 5 23:21:34 localhost installd[345]: PackageKit: kextcache -system-caches
Mar 5 23:21:36 localhost installd[345]: PackageKit: kextcache -update-volume / -Installer
Mar 5 23:21:52 localhost installd[345]: PackageKit: Executing script "./postinstall" in /private/tmp/PKInstallSandbox.sjtRin/Scripts/com.cisco.pkg.anyconnect.vpn.yM72U9
Mar 5 23:21:52 localhost installd[345]: ./postinstall: Setting ownership and permissions on installed files
Mar 5 23:21:52 localhost installd[345]: ./postinstall: Determining import locations
Mar 5 23:21:52 localhost installd[345]: ./postinstall: Installer package path: /Users/rioliu/Downloads
Mar 5 23:21:52 localhost installd[345]: ./postinstall: Installer volume path:
Mar 5 23:21:52 localhost installd[345]: ./postinstall: Installer DMG path:
Mar 5 23:21:52 localhost installd[345]: ./postinstall: nothing found to load
Mar 5 23:21:53 localhost install_monitor[1359]: Re-included: /Applications, /Library, /System, /bin, /private, /sbin, /usr
Mar 5 23:21:53 localhost installd[345]: PackageKit: releasing backupd
Mar 5 23:21:53 localhost installd[345]: PackageKit: allow user idle system sleep
Mar 5 23:21:53 localhost installd[345]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “cisco_anyconnect-3.1.02026.pkg”." UserInfo=0x7fcb0430e880 {NSFilePath=./postinstall, NSURL=file://localhost/Users/rioliu/Downloads/cisco_anyconnect-3.1.02026.pkg#vpn_module.pkg, PKInstallPackageIdentifier=com.cisco.pkg.anyconnect.vpn, NSLocalizedDescription=An error occurred while running scripts from the package “cisco_anyconnect-3.1.02026.pkg”.} {
NSFilePath = "./postinstall";
NSLocalizedDescription = "An error occurred while running scripts from the package \U201ccisco_anyconnect-3.1.02026.pkg\U201d.";
NSURL = "file://localhost/Users/rioliu/Downloads/cisco_anyconnect-3.1.02026.pkg#vpn_module.pkg";
PKInstallPackageIdentifier = "com.cisco.pkg.anyconnect.vpn";
Mar 5 23:21:53 localhost Installer[1345]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “cisco_anyconnect-3.1.02026.pkg”." UserInfo=0x7fa25caa4ba0 {NSFilePath=./postinstall, NSURL=file://localhost/Users/rioliu/Downloads/cisco_anyconnect-3.1.02026.pkg#vpn_module.pkg, PKInstallPackageIdentifier=com.cisco.pkg.anyconnect.vpn, NSLocalizedDescription=An error occurred while running scripts from the package “cisco_anyconnect-3.1.02026.pkg”.}
Mar 5 23:21:53 localhost Installer[1345]: Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
Mar 5 23:21:53 localhost Installer[1345]: IFDInstallController 5CE28DD0 state = 7
Mar 5 23:21:53 localhost Installer[1345]: Displaying 'Install Failed' UI.
Mar 5 23:21:53 localhost Installer[1345]: 'Install Failed' UI displayed message:'The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.'.
Mar 5 23:37:53 localhost Installer[1557]: @(#)PROGRAM:Install PRO -
hi,
I've tried to install AnyConnect Secure Mobility Client on my computer (Mac OS 10.6.8), I've never installed it before on this computer, however when I want to install i got the message
"Version 3.1.04063 of the Cisco AnyConnect Secure Mobility Client is already installed"
I would be thankful if anyone could help me with this problem !!!Would I be correct in assuming that you are trying to do a manual install of the AnyConnect client when you get this error? Have you ever used this MAC to connect to an ASA and to establish a VPN? If so it is quite likely that AnyConnect was installed in that on line session and does not require a manual install.
HTH
Rick -
AnyConnect Secure Mobility Client 3.1 attempts downgrade when accessing Customer VPN
I have Anyconnect Secure Mobility Client v3.1.03103 installed on Win7 Pro, which works fine with both my corporate vpn, and a number of customer vpns. For a particular customer though, The VPN setup fails and asks me to download and set up AnyConnect VPN Client 2.3.2016.
I have read other entries suggesting replacing VPNManifest.dat for machines running 2.5, but that doesn't appear to work here. Further, I have two directories, c:\Program Data\Cisco\Cisco AnyConnect Secure Mobility Client\ and c:\Program Data\Cisco\Cisco AnyConnect VPN Client\
Alternatively, can the two clients coexist?I also get this same error, except my operating system is Windows 7 Professional (SP1) 32-bit. Below is a bit more detail....
Details:
Browser: Chrome (but I've tried all 3 major browsers)
Firewall: off
Defender: off
Cleaned registry for Cisco and AnyConnect keys
reboot
Goto: vpn.agel.com (auto-install process begins)
It gets as far as downloading the client install file, but at the end of the download the following error appears:
Failed to install AnyConnect Secure Mobility Client 3.1.00495 with installer error: Incorrect function. A VPN connection cannot be established.
Download from the manual link
Execute the install file (anyconnect-win-3.1.04063-web-deploy-k9)
I get the "Open File - Security Warning" dialog
Click on "Run"
The application never runs. Nothing further happens.
Hope this helps! -
Problem installing Cisco AnyConnect Secure Mobility Client
Hello,
When attempting to install the Cisco AnyConnect Secure Mobility Client, I get the following message: "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."
Well, my support personnel haven't been able to assist. I am attaching the setupapi.dev file I was told could help in troubleshooting. Any help is greatly appreciated!
Thank you in advance.do you have the xml assigned in the group policy on the ASA? I know the scripting behavior changed between anyconnect 2.5 and 3.1. AnyConnect 2.5 only required the xml profile locally but 3.1 requires the xml with EnableScripting = true to be assigned to the group policy.
-
Cisco Anyconnect Secure Mobility Client Fails to Install
I've followed and contributed to posts about this problem here: https://supportforums.cisco.com/thread/2057631
But this problem isn't only isolated to 2.5 client, so I thought a new discussion might attract a bit more attention and feedback.
For 5 or 6 users when I try to install the client as new as version 3.0.11042 (any version, not just the newest) I get a failure:
CustomAction VACon64_Install returned actual error code -536870348 (note this may not be 100% accurate if translation happened inside sandbox)
Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action VACon64_Install, location: C:\Program Files (x86)\Cisco\Cisco AnyConnect VPN Client\VACon64.exe, command: -install "C:\Program Files (x86)\Cisco\Cisco AnyConnect VPN Client\\vpnva64.inf" VPNVA
MSI (s) (44:94) [16:15:05:629]: Product: Cisco AnyConnect VPN Client -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action VACon64_Install, location: C:\Program Files (x86)\Cisco\Cisco AnyConnect VPN Client\VACon64.exe, command: -install "C:\Program Files (x86)\Cisco\Cisco AnyConnect VPN Client\\vpnva64.inf" VPNVA
Before it rolls back, I try to run the command manually which appears to do something, but doesn't fix the problem.
This is the step that is trying to install the service VPNVA, but it fails.
I have cleaned up all the files I know how (which registry entries might I also try?) and rebooted several times, but no luck.
The documented Cisco solution, and what i've been telling frustrated users one after another is "re-image your machine"
Does someone have an idea of what else I can try?Thank you.
The workaround works. Yes, using Windows 8.1.
An HOW TO on how to set this for everyone who is not that computer savvy...
1. Go to the Start Screen of Windows 8.1 and look for the Cisco Anyconnect Secure Mobility Client icon (or just type it on the Start Screen).
2. Right click the icon and select 'Open file location'.
3. Right click the Cisco Anyconnect Secure Mobility Client (Shortcut) and select 'Properties'
4. Select the 'Compatibility' Tab.
5. Check the box 'Run this program in compatibility mode for:' and select 'Windows 8' in the drop down.
6. Click 'OK' to close the window.
7. Log off and log on again (or reboot the computer).
Note to point 5. If there are multiple users are using the PC with different user accounts and they're using the Cisco Secure Mobility Client as well, then go to 'Change settings for all users' and there apply point 5. To do so you'll need administrative rights to the computer though. -
Hello, I am a software engineer and have been trying to connect to my client's VPN using the AnyConnect Secure Mobility Client (version 3.1.04066) and keep receiving the error "The VPN client driver encountered an error. Please try again or restart your system."
I am on a Windows 7 system with an intel i7-2670QM cpu. My computer model is an HP Pavilion dv7.
I have tried uninstalling the software, re-installing it. I've tried restarting my system multiple times through the process. I've checked the registry and made sure the name was setup correctly. I have checked and made sure that the correct services are not enabled. I have also tried what was suggested on the support page and checked the integrity of catroot2 as well as renaming it and regenerating the folder. None of these have been able to fix my problem.
For information, this is the message history when I try to connect:
[12/8/2014 8:55:49 AM] Ready to connect.
[12/8/2014 9:27:19 AM] Contacting vpn.[hostaddressremoved].com.
[12/8/2014 9:27:22 AM] Please enter your username and password.
[12/8/2014 9:27:29 AM] User credentials entered.
[12/8/2014 9:27:30 AM] Please respond to banner.
[12/8/2014 9:27:31 AM] User accepted banner.
[12/8/2014 9:27:31 AM] Establishing VPN session...
[12/8/2014 9:27:32 AM] Checking for profile updates...
[12/8/2014 9:27:32 AM] Checking for product updates...
[12/8/2014 9:27:32 AM] Checking for customization updates...
[12/8/2014 9:27:32 AM] Performing any required updates...
[12/8/2014 9:27:32 AM] Establishing VPN session...
[12/8/2014 9:27:32 AM] Establishing VPN - Initiating connection...
[12/8/2014 9:27:33 AM] Establishing VPN - Examining system...
[12/8/2014 9:27:33 AM] Establishing VPN - Activating VPN adapter...
[12/8/2014 9:27:33 AM] Establishing VPN - Attempting to repair VPN adapter...
[12/8/2014 9:27:33 AM] Disconnect in progress, please wait...
[12/8/2014 9:28:22 AM] Connection attempt has failed.
[12/8/2014 9:28:24 AM] Ready to connect.
I have tried every kind of search I can think of to find any other solutions to try, and I cannot find anything else. Does anyone have any other recommendations of what to try in order to be able to connect to my client?
-TheJayDudeYes, I am sorry to say that several people have seen the same issue. It seems like the issue is specific to Yosemite and Anyconnect. My very technical staff and I have tried many things. The default route is missing and the file /var/run/resolv.conf is also missing which means that both the route and DNS server are messed up. We re-added the default route manually which allows us to ping the servers and even access them via the IP address
Run the command below before starting the VPN to get the default route
netstat -nr | grep default
Then run the following to re-add the default route.
route add default xxx.xxx.xxx.xxx
BUT there is no way that I can find to fix the DNS entry.
We tried re-adding the DNS entries in the /var/run/resolv.conf and then restarting the DNS service
$ sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.discoveryd.plist
Password:
$ sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.discoveryd.plist
BUT THIS DOES NOT WORK!
If anyone can help us solve the DNS issue, at least we have a work-around for our technical people until Cisco and/or Apple can resolve it.
Here is a link to the same issue at Cisco.
https://supportforums.cisco.com/discussion/12334071/cisco-anyconnect-secure-mobi lity-client-os-x-yosemite-vpn-not-working-if-mac -
Problems with Cisco AnyConnect Secure Mobility Client 3.1
Since I upgraded to Cisco AnyConnect Secure Mobility Client 3.1, I am unable to start my VPN.
The service does not start correctly anymore. I tried reinstabut no help.
Could anyone help me please?
Here my logs.
Thank you very much.
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: FileMoveFiles
File: ..\Common\Utility\NativeSysFileCopy.cpp
Line: 388
Invoked Function: ::FindFirstFile
Return Code: 3 (0x00000003)
Description: The system cannot find the path specified.
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: wWinMain
File: .\InstallHelper.cpp
Line: 354
Invoked Function: FileMoveFiles
Return Code: -33554423 (0xFE000009)
Description: GLOBAL_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: FileMoveFiles
File: ..\Common\Utility\NativeSysFileCopy.cpp
Line: 388
Invoked Function: ::FindFirstFile
Return Code: 3 (0x00000003)
Description: The system cannot find the path specified.
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: wWinMain
File: .\InstallHelper.cpp
Line: 354
Invoked Function: FileMoveFiles
Return Code: -33554423 (0xFE000009)
Description: GLOBAL_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: FileMoveFiles
File: ..\Common\Utility\NativeSysFileCopy.cpp
Line: 388
Invoked Function: ::FindFirstFile
Return Code: 3 (0x00000003)
Description: The system cannot find the path specified.
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: wWinMain
File: .\InstallHelper.cpp
Line: 354
Invoked Function: FileMoveFiles
Return Code: -33554423 (0xFE000009)
Description: GLOBAL_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:40
Type : Information
Source : acvpnva
Description : Function: CInstaller::PerformAction
File: .\VACon.cpp
Line: 522
Successfully installed service acsock
Date : 07/23/2013
Time : 08:49:40
Type : Warning
Source : acvpninstall
Description : Function: XmlLocalACPolMgr::GenerateLocalPolicy
File: .\Xml\XmlLocalACPolMgr.cpp
Line: 415
Local Security Policy file already exists and therefore will not be generated
Date : 07/23/2013
Time : 08:49:40
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:49:40
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:49:40
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:49:40
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:49:40
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:40
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:40
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:49:41
Type : Error
Source : acvpnagent
Description : Function: CSocketSupport::ipv6EnabledOnVA
File: .\IPC\SocketSupport_win.cpp
Line: 284
Invoked Function: CSocketSupport::ipv6EnabledOnVA
Return Code: 2 (0x00000002)
Description: cannot open VPNVA Enum registry key (VA driver not installed?)
Date : 07/23/2013
Time : 08:49:41
Type : Error
Source : acvpnagent
Description : Function: CSocketSupport::ipv6EnabledOnVA
File: .\IPC\SocketSupport_win.cpp
Line: 284
Invoked Function: CSocketSupport::ipv6EnabledOnVA
Return Code: 2 (0x00000002)
Description: cannot open VPNVA Enum registry key (VA driver not installed?)
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x00001F84) has been successfully created.
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:45
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:45
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CSocketSupport::ipv6EnabledOnVA
File: .\IPC\SocketSupport_win.cpp
Line: 284
Invoked Function: CSocketSupport::ipv6EnabledOnVA
Return Code: 2 (0x00000002)
Description: cannot open VPNVA Enum registry key (VA driver not installed?)
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CSocketSupport::ipv6EnabledOnVA
File: .\IPC\SocketSupport_win.cpp
Line: 284
Invoked Function: CSocketSupport::ipv6EnabledOnVA
Return Code: 2 (0x00000002)
Description: cannot open VPNVA Enum registry key (VA driver not installed?)
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x00001F20) has been successfully created.
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\ are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\CustomerExperienceFeedback are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\CustomerExperienceFeedback\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Help are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Help\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\l10n are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\l10n\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Script are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Script\
Date : 07/23/2013
Time : 08:49:49
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:49:50
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:49:50
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:49:50
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:49:50
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:50
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:50
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x000016C0) has been successfully created.
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:50:10
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:50:11
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:50:11
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:50:11
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:50:11
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:50:11
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:50:11
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x00001F34) has been successfully created.
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:50:19
Type : Information
Source : acvpnui
Description : Cisco AnyConnect Secure Mobility Client GUI started, version 3.1.04059
Date : 07/23/2013
Time : 08:50:20
Type : Information
Source : acvpnui
Description : Initializing vpnapi version 3.1.04059 ().
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:50:21
Type : Warning
Source : acvpnui
Description : Function: ClientIfcBase::getCurrentState
File: .\ClientIfcBase.cpp
Line: 2058
API service not ready
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:50:21
Type : Warning
Source : acvpnui
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.nam.api
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Function: L2Api::attach
File: .\L2Api.cpp
Line: 87
The NAM/L2 Api could not be found or failed to load, skipping.
Date : 07/23/2013
Time : 08:50:21
Type : Warning
Source : acvpnui
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.websecurity.api
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Function: SSApi::attach
File: ..\common\SSApi.cpp
Line: 51
The Web Security API could not be found or failed to load, skipping.
Date : 07/23/2013
Time : 08:50:21
Type : Error
Source : acvpnui
Description : Function: MFDartBox::getDARTInstallDir
File: .\MFDartBox.cpp
Line: 332
Invoked Function: MsiEnumProductsExW
Return Code: 259 (0x00000103)
Description: No more data is available.
Date : 07/23/2013
Time : 08:50:21
Type : Warning
Source : acvpnui
Description : Function: ClientIfcBase::getStats
File: .\ClientIfcBase.cpp
Line: 1723
Called when API service not ready.
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: CSocketTransport::connectTransport
File: .\IPC\SocketTransport.cpp
Line: 981
Invoked Function: ::WSAConnect
Return Code: 10061 (0x0000274D)
Description: No connection could be made because the target machine actively refused it.
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: CIpcTransport::connectIpc
File: .\IPC\IPCTransport.cpp
Line: 252
Invoked Function: CSocketTransport::connectTransport
Return Code: -31588340 (0xFE1E000C)
Description: SOCKETTRANSPORT_ERROR_CONNECT
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: CIpcTransport::terminateIpcConnection
File: .\IPC\IPCTransport.cpp
Line: 404
Invoked Function: CSocketTransport::writeSocketBlocking
Return Code: -31588319 (0xFE1E0021)
Description: SOCKETTRANSPORT_ERROR_NO_SOCKET_HANDLE:The socket transport does not possess a valid socket handle.
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: ApiIpc::initIpc
File: .\ApiIpc.cpp
Line: 423
Invoked Function: CIpcTransport::connectIpc
Return Code: -31588340 (0xFE1E000C)
Description: SOCKETTRANSPORT_ERROR_CONNECT
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: ApiIpc::initiateAgentConnection
File: .\ApiIpc.cpp
Line: 336
Invoked Function: ApiIpc::initIpc
Return Code: -31588340 (0xFE1E000C)
Description: SOCKETTRANSPORT_ERROR_CONNECT
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: ApiIpc::run
File: .\ApiIpc.cpp
Line: 570
Invoked Function: ApiIpc::initiateAgentConnection
Return Code: -31588340 (0xFE1E000C)
Description: SOCKETTRANSPORT_ERROR_CONNECT
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: ClientIfcBase::attach
File: .\ClientIfcBase.cpp
Line: 606
Client failed to attach.
Date : 07/23/2013
Time : 08:50:25
Type : Error
Source : acvpnui
Description : Function: CMainFrame::OnCreate
File: .\mainfrm.cpp
Line: 342
Invoked Function: The VPN service is not responding or available.
Return Code: -33554423 (0xFE000009)
Description: GLOBAL_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:50:25
Type : Information
Source : acvpnui
Description : Function: ClientIfcBase::detach
File: .\ClientIfcBase.cpp
Line: 438
Shutting down vpnapi
Date : 07/23/2013
Time : 08:50:25
Type : Error
Source : acvpnui
Description : Function: ConnectMgr::activateConnectEvent
File: .\ConnectMgr.cpp
Line: 1352
NULL object. Cannot establish a connection at this time.
Date : 07/23/2013
Time : 08:50:25
Type : Information
Source : acvpnui
Description : Cisco AnyConnect Secure Mobility Client GUI exiting, version 3.1.04059 , return code 0 [0x00000000]
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:51:12
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:51:12
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:51:12
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:51:12
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:51:12
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:51:12
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x0000162C) has been successfully created.
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:52:13
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:52:13
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:52:13
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:52:13
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:52:13
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:52:13
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:52:13
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:52:13
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:52:13
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:52:13
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPThere seem to be much more problems with 3.1.04049
Especially with certificate authentication.
I opened some TAC cases.
Try 3.1.04063 that came out at 07-24-13.
TAC said that there are some fixes in it... -
Windows 8 64 bit issues with Cisco AnyConnect Secure Mobility Client version 3.1.04072
I am having an issue with the Cisco AnyConnect Secure Mobility Client version 3.1.04072 on a Windows 8 64 bit laptop.
I am able to create the VPN connection but the connection will not allow data to be transferred.
Stats from a manual connection:
Cisco AnyConnect Secure Mobility Client Version 3.1.04072
VPN Stats
Bytes Received: 14375
Bytes Sent: 0
Compressed Bytes Received: 0
Compressed Bytes Sent: 0
Compressed Packets Received: 0
Compressed Packets Sent: 0
Control Bytes Received: 0
Control Bytes Sent: 0
Control Packets Received: 0
Control Packets Sent: 0
Encrypted Bytes Received: 7820
Encrypted Bytes Sent: 1207
Encrypted Packets Received: 9
Encrypted Packets Sent: 3
Inbound Bypassed Packets: 0
Inbound Discarded Packets: 0
Outbound Bypassed Packets: 0
Outbound Discarded Packets: 0
Packets Received: 4
Packets Sent: 0
Time Connected: 00:03:01
Protocol Info
Inactive Protocol
Protocol Cipher: RSA_3DES_168_SHA1
Protocol Compression: None
Protocol State: Disconnected
Protocol: DTLS
Active Protocol
Protocol Cipher: RSA_3DES_168_SHA1
Protocol Compression: Deflate
Protocol State: Connected
Protocol: TLS
OS Version
Windows 8 : WinNT 6.2.9200
Log from the data transmission software:
24/12/2013 12:51:13 - Application version = 1.11.28.0
24/12/2013 12:51:13 - Lodgement Library Version = 1.11.28.0
24/12/2013 12:51:13 - Connection Method = INTERNET
24/12/2013 12:51:13 - DIS Connection Type = Automatic
24/12/2013 12:51:13 - VPN Client = ACTIVE
24/12/2013 12:51:13 - Check Available Connections = NOT ACTIVE
24/12/2013 12:51:13 - Windows 8 (6.2.9200 SP )
24/12/2013 12:51:13 - Language: English (Australia)
24/12/2013 12:51:13 -
24/12/2013 12:51:13 - Connected to ISP via LAN
24/12/2013 12:51:13 - Checking for presence of VPN client.
24/12/2013 12:51:13 - VPN client found. (C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\vpncli.exe)
24/12/2013 12:51:13 - The Cisco AnyConnect Secure Mobility Client application is in use.
24/12/2013 12:51:18 - Terminating Cisco AnyConnect Secure Mobility Client in progress ...
24/12/2013 12:51:18 -
24/12/2013 12:51:18 - Checking Cisco AnyConnect version.
24/12/2013 12:51:19 - Cisco AnyConnect Secure Mobility Client (version 3.1.04072) .
24/12/2013 12:51:19 - Copyright (c) 2004 - 2013 Cisco Systems, Inc. All Rights Reserved.
24/12/2013 12:51:19 - Config file directory:C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\
24/12/2013 12:51:19 -
24/12/2013 12:51:19 - Loading profile:C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\ELS-IMelAde-TCP.xml
24/12/2013 12:51:19 -
24/12/2013 12:51:19 - Initializing the VPN connection.
24/12/2013 12:51:19 - Ready to connect.
24/12/2013 12:51:19 - Ready to connect.
24/12/2013 12:51:19 - Contacting ELS-IMelAde-TCP.
24/12/2013 12:51:23 - Authenticating user.
24/12/2013 12:51:23 - Connected to VPN concentrator.
24/12/2013 12:51:23 - Establishing VPN session...
24/12/2013 12:51:23 - Checking for profile updates...
24/12/2013 12:51:23 - Checking for product updates...
24/12/2013 12:51:23 - Checking for customization updates...
24/12/2013 12:51:23 - Performing any required updates...
24/12/2013 12:51:23 - Establishing VPN session...
24/12/2013 12:51:23 - Establishing VPN - Initiating connection...
24/12/2013 12:51:24 - Establishing VPN - Examining system...
24/12/2013 12:51:24 - Establishing VPN - Activating VPN adapter...
24/12/2013 12:51:24 - Establishing VPN - Configuring system...
24/12/2013 12:51:24 - Establishing VPN...
24/12/2013 12:51:24 - Connected to VPN concentrator.
24/12/2013 12:51:24 - Connected to ELS-IMelAde-TCP.
24/12/2013 12:51:24 - Connected to VPN concentrator.
24/12/2013 12:51:24 - Connection to VPN client return code = 0.
24/12/2013 12:51:24 - Connected to VPN concentrator.
24/12/2013 12:51:24 - Connecting : Connecting to 203.202.43.2.
24/12/2013 12:51:45 - Error in ConnectToDIS - Socket Error # 10060
Connection timed out.
24/12/2013 12:51:46 -
24/12/2013 12:51:46 - Disconnecting from the VPN concentrator.
24/12/2013 12:51:46 - Disconnect in progress, please wait...
24/12/2013 12:51:46 - Detaching AnyConnect, please wait...
24/12/2013 12:51:47 - Detached.
24/12/2013 12:51:47 - Disconnected from VPN concentrator.
24/12/2013 12:51:47 - *****************************************************
24/12/2013 12:51:47 - END OF LODGEMENT PROCESS
24/12/2013 12:51:47 - *****************************************************
Issue history:
- Previously running Cisco VPN client on Windows 8 64 bit laptop (VPN working and able to transmit data over VPN)
- Upgrade to Windows 8.1 stopped the VPN client working
- Refreshed system back to Windows 8 and reinstalled all software
- Cisco VPN client would not install on system
- Cisco AnyConnect Secure Mobility Client installs and is able to connect to VPN host
- Cisco AnyConnect Secure Mobility Client downloads and installs software from VPN host
- Data transmission software returns error code #10060
Any assistance would be greatly appreciated.anyone found the fix for this?
-
Cisco Anyconnect Secure Mobility Client crashes on Mac 10.8.5
Hi,
I have a Macbook Pro with Mountain Lion 10.8.5 OS installed. I am using Cisco Anyconnect Secure Mobility Client as a VPN to access my company's network (Intranet). Had been using this software for more than 2 Months and all of a sudden now when I use this Secure Mobility Client, the application is crashing and I get the following error message:
Process: Cisco AnyConnect Secure Mobility Client [1340]
Path: /Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app/Contents/MacOS/Cisco AnyConnect Secure Mobility Client
Identifier: com.cisco.vpn
Version: 3.0.10055
Code Type: X86 (Native)
Parent Process: launchd [152]
Date/Time: 2013-11-10 11:18:57.739 +0530
OS Version: Mac OS X 10.8.5 (12F45)
Report Version: 10
Interval Since Last Report: 6277 sec
Crashes Since Last Report: 2
Per-App Crashes Since Last Report: 2
Crashed Thread: 6
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000004
VM Regions Near 0x4:
--> __PAGEZERO 0000000000000000-0000000000001000 [ 4K] ---/--- SM=NUL /Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app/Contents/MacOS/Cisco AnyConnect Secure Mobility Client
__TEXT 0000000000001000-0000000000025000 [ 144K] r-x/rwx SM=COW /Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app/Contents/MacOS/Cisco AnyConnect Secure Mobility Client
Thread 0:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x96fcf7ce mach_msg_trap + 10
1 libsystem_kernel.dylib 0x96fcecac mach_msg + 68
2 com.apple.CoreFoundation 0x990e1f79 __CFRunLoopServiceMachPort + 185
3 com.apple.CoreFoundation 0x990e795f __CFRunLoopRun + 1247
4 com.apple.CoreFoundation 0x990e701a CFRunLoopRunSpecific + 378
5 com.apple.CoreFoundation 0x990e6e8b CFRunLoopRunInMode + 123
6 com.apple.HIToolbox 0x97821f5a RunCurrentEventLoopInMode + 242
7 com.apple.HIToolbox 0x97821cc9 ReceiveNextEventCommon + 374
8 com.apple.HIToolbox 0x97821b44 BlockUntilNextEventMatchingListInMode + 88
9 com.apple.AppKit 0x91d9193a _DPSNextEvent + 724
10 com.apple.AppKit 0x91d9116c -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
11 com.apple.AppKit 0x91d875cc -[NSApplication run] + 855I have identical problem on 10.7.5 OS and AnyConnect 3.1.04074
Just started happening yesterday.
Please post if you find a solution. -
Anyconnect Secure Mobility Client, Network Access Module, wired PEAP
Hello there,
I am testing AnyConnect Secure Mobility Client, Network Access Module as supplicant with PEAP authentication for wired network users. With default configuration it is working well. With default configuration it is Trusting any Root CA certificates installed on the OS. Do you know how to configure NAM that it will validate ACS certificate with specific Root CA Certificate ?
In Network Access Module profile editor it has two options about Certificates:
One is Certificate Trusted Authority which has two options by its self first is too trust any Root CA certificate that is installed on OS, and second is to import Root CA certificate in Profile. Potentially Second option can help in my case, I can manually import Root CA certificates in each profile. But I think it will be hard to update Root CA certificates in future in that way.
Second is Certificate Trusted Server Rules, this option have matching capability by certificate Common Name. For what can be used this option ?Normally the way it works is that you set up your Enterprise Root CA, and then have it issue a certifcate for the AAA server (ie ACS, ISE, etc). You then install this certificate on the AAA server and (in an Active Directory environment) add the Root CA certificate to the client systems local certificate store. What that means is that any certificates (such as the one installed on the AAA server) that are presented to the client that are signed by the root are automatically trusted.
Server validation is an extra step in terms of proving the identity of the AAA server to the authenticating client. As such, when you build the policy in the NAM editor, it would look similar to the image below:
I like to use the CN (Common Name) as the match criteria and build my CA issuance policy to always include the FQDN in the certificate for identity purposes.
Hope this helps! -
AnyConnect Secure Mobility Client Multiple Profiles
Hi,
I have multiple clients that use multiple versions of VPNs including Cisco, Sonicwall and others.
I have a client with the (older) "Cisco Systems VPN Client". Then I got a new client with instructions to install the "Cisco AnyConnect Secure Mobility Client". Without warning, the installation uninstalled what I now believe was an older version of this same VPN client - but the name has changed, the installation directories have changed, etc.
OK, but the new client wiped out the connection parameters to the old client.
I've tried to read and understand the other discussion entries about storing multiple "profiles" (i.e. vpn connections). Other VPN clients have a menu option or a simple way to add a connection, but it seems more challenging to do this with the AnyConnect client. However, I read, and tried to set up, multiple profiles. From the other discussions, I followed these steps:
1. Located the (hidden in Windows 7) following directory:
%ProgramData%\Cisco\Cisco AnyConnect Secure Mobility Client\Profile
2. Created two xml files, "Client1.xml" and "Client2.xml" in this directory. containing
<?xml version="1.0" encoding="UTF-8"?>
<AnyConnectProfile xmlns="http://schemas.xmlsoap.org/encoding/">
<ServerList>
<HostEntry>
<HostName>Client1HostName</HostName>
<HostAddress>Client1HostaddressDNS</HostAddress>
<PrimaryProtocol>IPsec</PrimaryProtocol>
</HostEntry>
</ServerList>
</AnyConnectProfile>
{And a similar file for Client2}
There was another discussion thread that had more lines in the xml file, which I also tried. Again, I created 2 separate xml files, each one with the respective client's parameters.
<?xml version="1.0" encoding="UTF-8"?>
<AnyConnectProfile xmlns="http://schemas.xmlsoap.org/encoding/">
<ServerList>
<HostEntry>
<User>navadmin</User>
<SecondUser></SecondUser>
<ClientCertificateThumbprint></ClientCertificateThumbprint>
<ServerCertificateThumbprint></ServerCertificateThumbprint>
<HostName>Client1</HostName>
<HostAddress>Client1DNS</HostAddress>
<Domain></Domain>
<Group>ssl_url</Group>
<ProxyHost></ProxyHost>
<ProxyPort></ProxyPort>
<SDITokenType>none</SDITokenType>
<ControllablePreferences>
<LocalLanAccess>true</LocalLanAccess></ControllablePreferences>
</HostEntry>
</ServerList>
</AnyConnectProfile>
I then quit the AnyConnect Secure Mobility Client and restarted, hoping that I would get a dropdown list that contained "Client1" and "Client2". This did not happen.
Prior to trying this, I did NOT delete the "Preferences.xml" file in the following directory:
C:\users\<myusername>\AppData\Local\Cisco\Cisco AnyConnect Secure Mobility Client
This is where the Anyconnect client stored the connection info when I manually input it into the GUI.
So, my questions are:
1. Do I need to delete the preferences.xml in order for the profiles in the other directory to be read and displayed in the client dropdown?
2. Are there naming conventions for the profile xml files that I'm not following by calling them "Client1.xml" and "Client2.xml"?
3. Any other ideas as to why this isn't working?
4. There are also references to a "profile editor", but the discussion threads aren't clear whether this utility is installed when you just install the client software, or if you have to have some sort of "administrator package" installed. If so, is this package available for download, or do you need to purchase a full VPN client license in order to have access to this utility?
Thanks,
RonThe Client1.xml and Client2.xml files that you created have correct content but wrong names. You only need 1 file called Profile.xml and inside you can then add multiple hosts by adding the nodes.
So your Profile.xml would look like this -
<?xml version="1.0" encoding="UTF-8"?>
http://schemas.xmlsoap.org/encoding/">
Client1HostName
Client1HostaddressDNS
IPsec
Client2HostName
Client2HostaddressDNS
IPsec
I hope this helps.
Ratan. -
Anyconnect Secure Mobility client 3.1.05187 external DNS issues in Windows 8.1
I am using AnyConnect Mobility client 3.1.05187 on Windows 8.1 machine and for last couple of days I am not able to connect to external sites.
There are two network adapters active:
Ethernet (IP and DNS address obtained automatically)
Cisco AnyConnect Secure Mobility Client Connection (Tunnel Mode (IPv4): Split Include)
Cisco AnyConnect Secure Mobility Client 3.1.05187 VPN Statistics Details(Thu Jan 29 12:43:45 2015)
Connection Information
Tunnel Mode (IPv4): Split Include
Tunnel Mode (IPv6): Drop All Traffic
Duration: 00:03:23
I have checked for 'do not change default gateway' setting but it's not displaying for VPN connection.
I hope someone can help me out.I'd start with installing the latest version of 3.1 and also try latest version of 3.0
Michael
Please rate all helpful posts -
Anyconnect secure mobility client sbl in windows 8?
Hi All,
Recently we are going to deploy windows 8 64 bit enterprise. But with the cisco anyconnect secure mobility client 3.1.00495, I can't use the the start before logon function. Can anyone give me some advice for the questions below? Thanks in advance
1. Does windows 8 support sbl?
2. If yes, what version of the cisco anyconnect client shoud be installed?
3. any settings in the ASA and the client need to be configured?
4. how to use this function in windows 8? ( what button or keys to triger it?)Any answer? I can not get v3.1.04072 to work under Windows 8.0
-
AnyConnect Secure Mobility Client with Oracle ESSO 11.1.1.5
Hello,
we are about to implement Oracle SSO for our client whose employees use Cisco AnyConnect Secure Mobility Client 3.0.5080 to access their internal network. The VPN access requires having the correct certificate installed on the client computers and users are required to enter their credentials (the same credentials that are stored in MS AD). All the client computers run Win 7.
Now - what we want to achieve is following: A client's employee logs into a domain, using domain account and starts the Cisco AnyConnect. The best option would be that the Oracle SSO would take it from here and do the rest in setting up the VPN connection - confirming the pre-selected profile, clicking the connect button, then filling the user credentials (from Oracle SSO database) in and confirming the dialog. Or, which is probably more viable way - the user will start AnyConnect, selecting which network to login in and the SSO will only enter the credentials and submit them to establish the connection.
So far we have been able to create templates for Oracle SSO to automatically enter the credentials for various applications, including SAP, but we are not able to create working template for AnyConnect. We are able to catch all the fields in the login window - Username, Password, Ok/Submit - when creating the template in ESSO-LM Admin Console but once the template is published to the repository and added to the test user in ESSO-PG, the SSO does not fill the credentials in. We also tried to "bypass this" using SendKeys with no result as well. All other applikcatios work.
Do you have any experience with such situation or have any hints what can we try?
Thank you for any answers,
Ondrej
PS: I have found https://supportforums.cisco.com/message/3852541. Is it really that the AnyConnect does not allow any application any input?Here is a link to an example of configuring AnyConnect to use IKEv2. According to this ASA 8.4 and AnyConnect 3.1 should be ok.
http://www.cisco.com/c/en/us/support/docs/security/anyconnect-secure-mobility-client/113692-ac-ikev2-ca-00.html
HTH
Rick
Maybe you are looking for
-
Prcc error Currency GBP is not in table TCURR
Hi, While importing the credit card transaction using PRCC for canadian employyees an error message was obtained "Currency GBP is not in table TCURR". In the table V_PTRV_CCC i can see that there is the orignal GBP amount and also the excahange rate
-
Most programs including Firefox have a menu bar. This seems to have gone in FF4. How do I get it back, or do I go back to FF3.x
-
FCP 4.5 won't run after tranfering it to new Mac Pro
Hi. Bought a Mac Pro from the apple centre. Used firewire to transfer all files and programs to the new machine. When trying to launch FCP the program says required hardware not found and that's that. So, any ideas?
-
I am running XP Pro with SP3 and all current patches. My dvd drive is a Plextor PX-760A. At first neither the CS4 application dvd nor the Learning dvd would start in my drive. Then I flashed the drive firmware from 1.04 to 1.07. This drive uses the w
-
CS4 Installation Disk won't launch
I have OSX Lion, a 21.5-inch, late 2009 Mac, and CS4 Premium. I put in Installer Disc 1 for CS4 Premium and double click Install Adobe Creative Suite (BTW, there is a white international symbol for "no" on the icon). A dialogue appears: "You can't o