Cannot install APN configurations profile for H2O data network

I am helping a friend of mine with his new unlocked iPhone he got from apple. It is not Jailbroken. In order to get to the data network, he has to install a profile to setup the APN configurations. The phone refuses to install because their can only be one APN configurations profile at a time. This issue should be solved by removing any old profiles that may cause the conflict. The problem is that there are no other profiles installed on the phone at all. In fact, I couldn't even make the profile option show up before installing another profile.
I read in the internet that sometimes, if you update your phone the system may hide any old profiles it doesn't like. Is this true? If it is, is there away to remove the hidden profiles without doing a full reset to the device and wipe everything I have in there?
iPhone 4 with iOS 4.3.2

Hello,
you don't need to sign the MDM profile with the APNS-certificate, and to my best knowledge you shouldn't even do it. The APNS-certificate is solely for the purpose of authenticate the MDM-commands your server sends to Apple's Push notification service.
The installed MDM-profile on your device can be unsigned or signed with a SSL-webservercertificate from one of the trusted standard-CAs like Verisign or Thawte.
You should make sure that your MDM-server either delivers it unsigned (which is failsafe and works) or upload a trusted SSL-certificate (together with the private key, usually in .PFX-format) for this task.
One of the initial obstacle in Apple-MDM is to understand which classes of certificate are required and to understand their respective purpose.
Best regards,
Detlev

Similar Messages

  • MMS fails on iPhone 5 with AT&T when APN configuration profile installed

    Installing a configuration profile containing APN information to the new AT&T iPhone 5 results in breaking the capability to send or receive MMS messages through the Messages app on the device. This is for MMS (Multimedia Messaging) and not iMessage (that works fine).
    This happens regardless whether the device is on LTE mode or on 3G mode.
    The configuration profile we are using has APN information and proxy settings for this APN as well (proxy host and port information). However, the problem happens even if the profile contains just APN without any proxy settings info.
    This happens on iPhone 5 ONLY (commercially available through AT&T). This is important to note because iPhone 4S with iOS 6 DOES NOT HAVE THIS PROBLEM.
    This problem happened last year too when iPhone4S was introduced. But it was fixed later.

    yes, sir, without the profile, everyhting is fine on the 5, that is MMS and VVM.
    This is really what confuses us over here too. We thought it was the proxy itself. So we took it out and created a very simple profile with just APN, no proxy, nothing else. MMS and VVM would still not work on the iphone5. But data (browser and apps) still worked fine.
    Are you aware of the iOS 6 issue I also brought up in this forum, where removing an APN/proxy config profile actually leaves the proxy settings behind (even though the profile itself is removed)?
    Well, if I remove my APN/proxy config profile on the iphone 5, the proxy settings are still there, as I can see browser and apps data still going through my proxy (even though my profile is gone). But check this out: MMS and VVM now work (despite the apparent presence of the proxy)!! This is actually our workaround at the moment, using another problem to our advantage.
    I think all this shows something is wrong here.

  • Installing a lens profile for a Samyang 14mm

    Installing a lens profile for a Samyang 14mm f2.8 ED AS IF UMC on a Canon EOS 5D Mark II
    I downloaded http://www.photo-worx.de/index.php?option=com_content&task=view&id=49
    I edited the .lcp file and set
    <stCamera:CameraRawProfile>True</stCamera:CameraRawProfile>
    so it should work for my raw .DNG file
    I created a folder for it, and put the Samyang14mm.lcp file in
    F:\Program Files\Adobe\Adobe Photoshop Lightroom 5.4\Resources\LensProfiles\1.0\Samyang
    and restarted LightRoom5.4
    But under Lens Corrections, when I tick Enable Profile Corrections there is no Make Samyang appearing, and I cannot find the profile.
    What am I doing wrong?
    Does anyone have a RAW profile for the Samyang 14mm f2.8 ED AS IF UMC that works?

    Referencing: Victoria Bampton (Lightroom Queen)
    Your Develop Defaults, Lens Defaults and Custom Point Curves are stored at...
    Windows—C: \ Users \ [your username] \ AppData \ Roaming \ Adobe \ CameraRaw \
    Mac—Macintosh HD / Users / [your username] / Library / Application Support / Adobe / CameraRaw /
    I am guessing if you move them to the correct location they will show up.

  • Installing a lens profile for a Samyang 14mm f2.8 ED AS IF UMC

    Installing a lens profile for a Samyang 14mm f2.8 ED AS IF UMC
    I downloaded http://www.photo-worx.de/index.php?option=com_content&task=view&id=49
    I edited the .lcp file and set
    <stCamera:CameraRawProfile>True</stCamera:CameraRawProfile>
    so it should work for my raw .DNG file
    I created a folder for it, and put the Samyang14mm.lcp file in
    F:\Program Files\Adobe\Adobe Photoshop Lightroom 5.4\Resources\LensProfiles\1.0\Samyang
    and restarted LightRoom5.4
    But under Lens Corrections, when I tick Enable Profile Corrections there is no Make Samyang appearing, and I cannot find the profile.
    What am I doing wrong?
    Does anyone have a RAW profile for the Samyang 14mm f2.8 ED AS IF UMC that works?

    Awesome, thanks for that.
    One last thing, I created a folder for the profile
    C:\Users\Richard\AppData\Roaming\Adobe\CameraRaw\LensProfiles\1.0\Samyang\Samyang14mm.lcp
    but the profile doesn't show up under Make Samyang as expected, instead it is at the bottom of Canon, with Model Samyang 14mm.
                      <stCamera:ProfileName>Canon EOS 5D Mark II - (Samyang 14mm f2.8 ED AS IF UMC)</stCamera:ProfileName>
                      <stCamera:Make>Canon</stCamera:Make>
                      <stCamera:Model>Canon EOS 5D Mark II</stCamera:Model>
                      <stCamera:Lens>Samyang 14mm f2.8 ED AS IF UMC</stCamera:Lens>
                      <stCamera:LensID>40</stCamera:LensID>
                      <stCamera:LensPrettyName>Samyang 14mm f2.8 ED AS IF UMC</stCamera:LensPrettyName>
                      <stCamera:CameraPrettyName>Canon EOS 5D Mark II</stCamera:CameraPrettyName>
    I did try <stCamera:Make>Samyang</stCamera:Make>, and restarted lightroom, but that didn't alter it.
    Anyone know how to make "Make: Samyang" appear?
    The photo is much better now that it is profiled:
    CastlePoint from Castle Rock | Flickr - Photo Sharing!
    Regards, Richard Mayston

  • Configuring reports for express data(2)

    We are in the process of configuring reports for express data.
    In this regard we have done the following steps:
    1.In the machine A reports 9i developer suite release 2 has been installed on Windows 2000
    Professional Edition with the following utilities - (a) Oracle Reports Builder and runtime
    support,(b) Oracle Express Connection Editor and (c) Oracle SNAPI are installed.
    2.Express Server 6.3.4 has been installed on Windows 2000 Professional Edition in machine
    B with Remote Operation SNAPI 6.3.4.0.
    3.Oracle 8i has been installed on Solaris and the Express Support Administrator and User
    Accounts have created and the xrb_admin.sql and xrb_user.sql have been run through the
    respective accounts.
    Queries
    1.We have still not run the Express Oracle8 External Procedures on the Oracle8
    gateway. Should we run this in order to get Express Data in Reports9i incase of the General
    Maintenance where the Express data fetches the data from the Oracle8 gateway on the fly
    ?We are also not able find the Express Oracle8 External Procedures downloads after
    extensive search on OTN.Please guide as to where can we find the downloads.
    2.What are the configurations settings that have to be done in the tnsnames.ora,sqlnet.ora
    and listener.ora ?

    Ramakrishnan,
    Express connectivity for Oracle9i Reports is installed by default as one of your pluggable data sources and it communicated directly with Express, which is a large change over Reports 6i in which you needed an Oracle8i database to talk to the Express database.
    For Oracle9i Reports, you need to have:
    1 - Express installed 6.3 or later.
    2 - Oracle9i Reports
    3 - The connection dialog (which is documented in the release notes if you need to set this up)
    That's it. When you click on the Express PDS to access the data, it will read the connection dialog information and you need to supply the logon information to the Express database.
    You should also look at the help topic for Express and you will find all the necessary documentation on configuring Reports and how to connect.
    Regards,
    The Oracle Reports Team jls

  • Configuring reports for express data

    I am trying to configure reports for express data and in this regard I have done the following :
    1.Machine A having reports 9i Developer suite Release 2 and Pluggable Express Connection Editor
    installed on Windows 2000 professional.
    2.Machine B having which Express Server 6.3.4 installed on Windows 2000 professional.
    3.In Machine A created user OESDBA with Administrator privilige.
    In the reports I am able to connect to the Express Server and attach the database and choose the
    measure.Once all the other steps are done I am able to print the data on the reports.
    But if I use a parameter form in which I give the HOST,USER and PASSWORD then substitute the
    same in the express_server parameter value in the AFTER PARAMETER FORM trigger block then
    the report gives an error saying that
    Express query contains incorrect,missing or damaged information.
    How to solve this error ?
    Can any one help me out.

    Ramakrishnan,
    Express connectivity for Oracle9i Reports is installed by default as one of your pluggable data sources and it communicated directly with Express, which is a large change over Reports 6i in which you needed an Oracle8i database to talk to the Express database.
    For Oracle9i Reports, you need to have:
    1 - Express installed 6.3 or later.
    2 - Oracle9i Reports
    3 - The connection dialog (which is documented in the release notes if you need to set this up)
    That's it. When you click on the Express PDS to access the data, it will read the connection dialog information and you need to supply the logon information to the Express database.
    You should also look at the help topic for Express and you will find all the necessary documentation on configuring Reports and how to connect.
    Regards,
    The Oracle Reports Team jls

  • Apple Configurator Can't install app configuration profile bug?

    Hey all-
    We currently use configurator to maintain 30 new ipads. We have updated the IOS on these devices to 6 and now whenever we install a configuration profile blocking people from installing their own app or in app purchases we get a "Can't install app" error message as part of the refresh process. I understand I am using configurator with a drastically changed device and the profile part of configurator hasn't been updated yet. As of right now the only workflow I have found that works is to
    1.) Unsupervice the device
    2.) Resupervise it
    3.) Reinstall apps
    4.)Install the configuration profile blocking app purchases.
    I have to do this any time I want to do application updates...
    Anybody else runing in to this problem?

    Ryan,
    I loan all of our ipads on a 4 day basis and I never have them all back at the same time to do that type of sweeping change. Before IOS 6 came out I could have changes waiting for an ipad to be returned and they would take effect then. Now if I update an app for one all of the other ipads we plug in will fail (If I'm not here when they are returned). This is a problem apple needs to fix and not something simple I can work around.
    I've pretty much just stopped updating apps but once every month or so till this gets resolved.

  • What are the apn settings for cellular data network on iphone 4 using straight talk

    i have an iphone 4 and can not get the cellular data network to work unless connected to wifi and i am on the straight talk unlimited monthly plan.also can not send or recieve picture messages.what are the settings for the apn for straight talk for cellular data network?i have talked to several customer serv reps and tech support and supervisors working with straight talk ,but they all tell me sumthing difrent and none of them help.so they transfer me and then say they can only remain on a call a certain amount of time.Help?

    Go here on your phone, see if you can add the correct APN settings to your phone:
    http://www.unlockit.co.nz/unlockit/

  • How to Install and Configure Workflow For PO in Oracle Apps Version R12

    Hi,
    Please do let me know how to install and configure Workflow for Purchasing in Oracle Apps R12 Version.
    I want to the standard setup of workflow configuration for the PO.
    Thanks and Regards
    Srini

    Hi Suresh
    Only the latest version of WLP which is WLP 10.3.2 has facility to integrate with Oracle UCM with Adapaters. So make sure that you do have this latest version of WLP 10.3.2. Older versions like WLP 10.3 do not have this provision.
    Also I guess when you install and configure this Oracle UCM Adapater and choose above WLP Home, I guess these modules may be added in already installed WLP folders. I checked on my side for WLP 10.3.2 and I could NOT find the modules you mentioned. So most probably you may be missing some installation/configuration stuff from UCM side.
    Thanks
    Ravi Jegga

  • Beginner installing SQL Server 2014 for Excel Data Mining

    Hello, I'm a complete beginner with servers but Im desperately trying to gain access to the SQL server for use with the data mining addin for excel.
    Could someone please help. When I try to make a connection in Excel by choosing DATA MINING> <No Connection> New> it then asks me for a Server Name in the connect to Analysis Services box. How can I find out what my Sever name is please? I have
    tried all sorts of names that I have found such as SQLEXPRESS or localhost but nothing works. It also tells me to 'Ensure that the Server is running'. Another error message I receive: No connection can be
    made because 'the target machine actively refused it'.
    I would be really grateful for some troubleshooting tips.
    Thank you

    Hi Alberto,
    Thanks very much for getting back to me.
    Here are the results of the Analysis Services report:
    Microsoft SQL Server 2014 Setup Discovery Report
    Product
    Instance
    Instance ID
    Feature
    Language
    Edition
    Version
    Clustered
    Configured
    Microsoft SQL Server 2014
    SQLEXPRESS
    MSSQL12.SQLEXPRESS
    Database Engine Services
    1033
    Express Edition
    12.0.2000.8
    No
    Yes
    Microsoft SQL Server 2014
    SQLEXPRESS
    MSSQL12.SQLEXPRESS
    SQL Server Replication
    1033
    Express Edition
    12.0.2000.8
    No
    Yes
    I then ran the System Configuration Checker and these are the results:
    Passed: 9. Failed: 1.
    Edition WOW 64 Platform    Failed
    (I can't paste the images as my account has not been verified)
    Should I assume that I have installed the wrong version? I am running 64 Bit Windows 8.
    I just need the most basic version for personal data analysis in Excel with the Data Mining Add-in. 
    Thanks again

  • Installing and configuring PHP for ORACLE 10g Release 1

    Hello Lads,
    Please can anybody help me finish PHP install...
    I have got this error when executing the following command..
    #make install
    Here is the error:
    /usr/local/php-5.1.4/sapi/cli/php: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
    Thanks!

    I answered in your other thread... the one without the I in the title :)
    nstalling and configuring PHP for ORACLE 10g Release 1

  • Error in Installing the Business Content for 2LIS_06_INV data source

    Hi Experts,
    We are trying to install the Business content for 2lis_06_inv. When we replicate the datasource, we are not seeing it in 3.x version. It is only vailable in 7 version. There is no transformation available in Business content for this data source. Please let me know how we need to proceed with this installation. Should we install the 7.0 flow or 3.x flow? Please provide th details if you have implemented th same in your system. Thanks is advance.
    Regards,
    Kavitha Jagannath

    Hi,
    Follow bellow steps:
    1. Goto RSA1.
    2. Select the BI content.
    3. Select the Grouping as' In Dataflow before and after'
    Then,you can get the data flow which are haveing the DS/TR/Data targets.
    4. Select the Install by setting the 'Install in background'.
    Regards.

  • Can't install the configuration profile

    Hi, I have upgraded the ipad2 to iOS 5 and created a configuration profile, when I connect the iPad through USB, I can see the install button but when I click on it, nothing happens, it seems as if I missed something! Even when I try sending it as attachment through my email, it doesn't allow me to install it, it just gives me the option to copy.
    Is there any way to do it?
    Thanks

    Is it possible one of the payloads is incomplete?  I most often see an install failure when a mandatory entry in a payload is missing or has a bad value.....

  • Configuring the default configuration profile for Profile Manager

    Hello folks,
    I would like to edit the default configuration profile served by Profile Manger. As far as I understand the only thing I can configure from the Server.app is the name of the profile. The settings for the different services provided by the server (such Mail, Messages, etc.) are automatically chosen by Server.app. When logging as an administrator on the Profile Manager webapp, I can go to "Groups", choose "Everyone", go to "Settings" to review the different payloads. However, almost none of the settings are editable. You can read "This payload is configured using the Server app" on the top of the various panels.
    So my question is: How do you use Server to tweek those payloads? Can this be done using the serveradmin command line tool?
    Thank you very much for your help.
    Regards

    Bump. This is annoying the crap out of me. Every time I try to design a website using Coda, this color picker bug plagues me. I just wish I could turn off color profiles completely as I will never use them.

  • Configuration Profile for Apple Devices with ISE

    Hi,
    is there any possibility to put configuration profiles on apple device with the ise? I need to disable the dataroaming function in forgein countries for ipads.
    Best regards
    Felix

    Nice. Only trouble there seems to be multiple entry for same mac address there for same resource id.
    So when I try to get them as substring i get multiple copies of same mac address.
    But looks like this will work as solution to this problem.
    So far I was doing it this way (And i am sure there is clearer way to do it.)
    SUBSTRING((SELECT ',' + CAST(t2.MACAddress0 AS VARCHAR(40))
                FROM (SELECT DISTINCT ResourceID, MACAddress0 FROM  v_GS_NETWORK_ADAPTER) t2
                WHERE t2.ResourceID = ResourceID
                ORDER BY t2.ResourceID, t2.MACAddress0
                FOR XML PATH ('')
            ), 2, 100) [MACAddresses]

Maybe you are looking for