Cannot install Applcations in Stand-Alone Media image

Since updating from SCCM 2012 R2 to CU3 i have not been able to get our Stand-Alone media to work.
The Task Sequence is running fine until it gets to the install of the SCCM client. The installation of the client runs and then it restarts and then it runs it again, but when the task is done it goes to the login screen of Windows and ignores all the steps
which comes after the client install.
I have put in some alerts in order to find out exactly where is fails and the alert which runs prior to the client install is shown but the alert immediately after the install is never run.
I am beginning to supect that the client install is failling.
I have updated the package on the DP wihthout success.
TS:
SMSTS.LOG
<![LOG[==============================[ OSDSetupHook.exe ]==============================]LOG]!><time="08:48:39.816+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="osdsetuphook.cpp:186">
<![LOG[Executing task sequence]LOG]!><time="08:48:39.831+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="osdsetuphook.cpp:279">
<![LOG[Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat".]LOG]!><time="08:48:39.847+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:366">
<![LOG[Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}]LOG]!><time="08:48:39.847+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="environmentscope.cpp:659">
<![LOG[Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}]LOG]!><time="08:48:39.847+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="environmentscope.cpp:659">
<![LOG[Debug shell is enabled]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1440">
<![LOG[Successfully enabled debug command shell support.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="debugwindow.cpp:156">
<![LOG[Configuring local administrator account]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1462">
<![LOG[Enabling local administrator account]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1219">
<![LOG[Account was already enabled]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1228">
<![LOG[Re-assign all drive letters...]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="diskutils.cpp:1941">
<![LOG[The drive information which has no drive letter can not be found. No need to re-assign driver letters.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="diskutils.cpp:1951">
<![LOG[Installing SMS client]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1474">
<![LOG[Clearing existing client configuration.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="installclient.cpp:291">
<![LOG[Cleaning existing client certificates from SMS certificate store]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="0" thread="2152" file="installclient.cpp:138">
<![LOG[The client identity was not found in the environment. A new identity will be generated for this client.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="installclient.cpp:363">
<![LOG[Using CRL: true]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="installclient.cpp:952">
<![LOG[Unable to read SMS client cert from environment. Not restoring SMS client cert.]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="2" thread="2152" file="installclient.cpp:962">
<![LOG[Executing command line: "C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe" /Register:WinPE]LOG]!><time="08:48:39.925+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:827">
<![LOG[==========[ TsProgressUI started in process 2180 ]==========]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="2184" file="winmain.cpp:330">
<![LOG[Registering COM classes]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="2184" file="winmain.cpp:187">
<![LOG[sbModulePath = C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="2184" file="tsprogressuiclass.cpp:625">
<![LOG[Shutdown complete.]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="2184" file="winmain.cpp:512">
<![LOG[Process completed with exit code 0]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:1123">
<![LOG[Successfully registered TS Progress UI.]LOG]!><time="08:48:39.940+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="utils.cpp:2279">
<![LOG[Executing command line: "C:\_SMSTaskSequence\OSD\PRI00158\ccmsetup.exe" /useronly /source:C:\_SMSTaskSequence\OSD\PRI00158 /config:MobileClient.TCF /status:564]LOG]!><time="08:48:39.987+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:827">
<![LOG[Launching command shell.]LOG]!><time="08:49:32.715+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2172" file="debugwindow.cpp:202">
<![LOG[executing command: C:\WINDOWS\system32\cmd.exe /k]LOG]!><time="08:49:32.715+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2172" file="debugwindow.cpp:63">
<![LOG[executed command: C:\WINDOWS\system32\cmd.exe /k]LOG]!><time="08:49:32.715+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2172" file="debugwindow.cpp:80">
<![LOG[Process completed with exit code 0]LOG]!><time="08:50:19.515+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:1123">
<![LOG[Start to cleanup TS policy]LOG]!><time="08:50:19.515+00" date="01-06-2015" component="OSDSetupHook" context="" type="0" thread="2152" file="utils.cpp:3055">
<![LOG[End TS policy cleanup]LOG]!><time="08:50:19.531+00" date="01-06-2015" component="OSDSetupHook" context="" type="0" thread="2152" file="utils.cpp:3103">
<![LOG[Active request handle is empty, registering with new active request handle. This is expected if the TS was started from a media/PXE.]LOG]!><time="08:50:19.531+00" date="01-06-2015" component="OSDSetupHook" context="" type="2" thread="2152" file="utils.cpp:4522">
<![LOG[Saving the new active request handle for the task sequence: {03EB3804-5F8D-4AA4-9C9F-5FE7E57A4FB0}]LOG]!><time="08:50:19.531+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="utils.cpp:4535">
<![LOG[Succesfully registered the tasksequence with the execution manager]LOG]!><time="08:50:19.547+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="utils.cpp:4597">
<![LOG[Executing command line: "C:\WINDOWS\system32\_SMSOSDSetup\TsProgressUI.exe" /Unregister]LOG]!><time="08:50:20.576+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:827">
<![LOG[==========[ TsProgressUI started in process 512 ]==========]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="1112" file="winmain.cpp:330">
<![LOG[Unregistering COM classes]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="1112" file="winmain.cpp:204">
<![LOG[Shutdown complete.]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="TsProgressUI" context="" type="1" thread="1112" file="winmain.cpp:512">
<![LOG[Process completed with exit code 0]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="commandline.cpp:1123">
<![LOG[Successfully unregistered TS Progress UI.]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="utils.cpp:2320">
<![LOG[Moving logs to SMS client directory]LOG]!><time="08:50:20.592+00" date="01-06-2015" component="OSDSetupHook" context="" type="1" thread="2152" file="basesetuphook.cpp:1495">
I hope someone out there can point me in the right direction

Hi Martin
Could you try adding a delay in the task sequence after the reboot, I have experienced a number of problems with SCCM 2012 R2 and reboots in task sequences. Microsoft Premier Support recommend creating a 5 minute delay. A shorter one may resolve the problem,
I would recommend trying this first.
The other thing to check is how are you preparing you boot media are you using a usb, if so is it formatted to NTFS or FAT32, I would always recommedn NTFS

Similar Messages

Optional applications selected via UDI interface and stand alone media

I'm running SCCM 2012 sp1 with MDT integration. I'm using a UDI from MDT to set some basic machine informatoin for imaging (select the OU in the domain, etc). I also have some optional apps that a tech can select from the UDI to install during
the TS.
All is working great with network based installations. However, I have a need for some installations using stand alone media. Is there a way to create stand alone media that will include those optional apps in the MDT UDI so that those apps can
install during the TS? I don't think there is, but there are more brilliant minds than mine out there so I thought I would ask. Maybe there's a way to generate stand alone media via a PS script or something, and have it include the additional
packages so they are on the media and can be called via the TS when it runs.
Thanks!

The root cause of this issue has nothing to do with UDI really, it is just the fact that installing applications using dynamic base variables is not supported in standalone media. As you say everything has to be directly referenced by the task sequence
for it to work.
We had this same issue a couple of years ago in ConfigMgr 2007 and ended up building our own standalone media wizard using the SDK. Sounds like a lot of work I know, but for us it was well worth it. We have just migrated it to ConfigMgr
2012 and updated it to support the app model.
The reason it made sense for us to invest the time in it was because we are a fairly large enterprise (160,000 seats) with a single task sequence used worldwide. The Windows 7 configuration requirements (not just in terms of app deployment) vary
dramatically from one country to another, but using variables to control deployment we have managed to retain a single TS but let the child site admins have some flexibility. As we have many small branches/agencies with no ConfigMgr infrastructure we
had to come up with a solution which retained and reused the single TS design but also worked offline. Standalone media is used to deploy Windows 7 to thousands of users. Getting the local apps to install wasn't our only issue, the size
of the media was also a problem due to the number of dependencies required to support deployment in every country (drivers, language packs, x86+x64 etc.).
So our standalone media wizard does this:
Reads in the collection variables (used to customise deployment, deploy apps etc.)
Prompts the user for various options like x86/x64, HW types etc.
Creates a copy of the global TS, the wizard then modifies the copy so that a custom TS is created dynamically just for the media.
It disables any unwanted actions in the local TS to remove drivers, x86/x64, language packs etc.
Adds install application actions for each of the apps specified in the dynamic app install variables.
Prompts user for normal standalone media options like ISO, USB, Password, DPs etc.
Creates media based on local/temporary TS.
Deletes the local/temporary TS when complete.
This solves the issue for zero touch deployment but does it work with UDI? Well the answer is yes and no. We do use UDI (but again built with the MDT UDI SDK). Out of the box, the answer is no. UDI brings a slightly different
issue in that not only are the apps not referenced by the TS (so they are not in the media) but you are also then trying to dynamically change which apps are installed during deployment. So even if the apps are directly referenced and in the media,
you still have to develop a way of controlling which TS app install actions run based on the user selection.
If you are willing to spend some time with the SDK then it can be done, you just may not find this worthwhile depending on the scale of your environment.
Mark.

Can Adobe Premiere CC 2014 be Installed as a Stand-Alone Upgrade?

Can Adobe Premiere CC 2014 be Installed as a Stand-Alone Upgrade without having to conflict with an Adobe CC suite on a given machine?

Yes, I have PrP CS6, CC and CC2014 all currently available on my system. The only pain I've experienced is that project files insist on opening in CC2014 even though I am wanting to primarily work in CC. If I tell the system to always open ALL .prproj files in CC, it seems to be very inconsistent and typically opens in CC2014.
CC2014 creates a new, separate app file and all (most?) prefs are stored in 8.0 folders.

Clone Stand-Alone media bootable thumbdrive

Hello,
SCCM 2012 R2 have created a stand-alone media bootable thumbdrive and would like to clone it. Is there a way?
Thanks!

Not sure on the quantity of thumb drives they're seeking there is about 10 sites with about 30 systems per site.
Currently the task sequence takes over an hour to complete the Wizard build on the thumb drive.
I see a couple utilities that claim to do the whole bit copy. But who knows if issues arises later using one of these solutions?
Thanks!

Stand-alone media and domain joining

Hello,
please help to identify a problem, I have used stand-alone media to migrate one computer from XP to 7, all good except joining to domain, computers saved its name but instead of domain computer is in workgroup named as domain netbios name, I have checked
smsts log, I did not find any "djoin" records, what can be a reason? This TS works good without stand-alone media, also in the TS a I have checked connection to domain with specified account for joining to domain.
SCCM 2012 R2.

I have found a lot of similar entries:
05/07/2014 17:47:12:916 NetpValidateName: name 'domain.com' is valid for type 3
05/07/2014 17:47:12:916 NetUseAdd to \\ADC01.domain.com\IPC$ returned 1909
05/07/2014 17:47:12:916 NetpJoinDomain: status of connecting to dc '\\ADC01.domain.com': 0x775
05/07/2014 17:47:12:916 NetpJoinDomainOnDs: Function exits with status of: 0x775
05/07/2014 17:47:12:916 NetpDoDomainJoin: status: 0x775
ad account which is used for joining is not locked and tested for accessing to OU.

Stand-alone media, how to domain join & set computername?

Hi
I've created a stand-alone media. The computer is connected to the network.
After the setup, the computer (it is already in a collection in sccm with the correct mac address) won't renamed correctly and won't join in the domain.
What do I need to have the machine staged via stand-alone media have a correct host name and joined in the domain?
Thx for the reply.

Hi,
Please take a look at this thread:
http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/b435dc26-bdc2-4b3d-a305-2e105eaf9a57

Having problem creating Database on Oracle8i installed on a stand alone NT 4.0

Hi,
I have installed Oracle 8i Enterprise Edition on my stand alone Windows NT4.0 work station (Service Pack 3). After installation, it tries to create a sample database and just hangs there. I also tried aborting it and creating it using "Database Configuration Assistant" and still facing the same problem. It doesn't show any error but just hangs indefinitely at the database creation menu. I observed that the listener is not running.
Kindly let me know if there are any precautions to be taken while installing a Oracle 8i on Stand alone Windows NT. My NT is NOT CONNECTED to any network. Also, let me know how I can create a database when listener is not running.
Regards,
Sheshachala

I installed 816 EE on my home NT40 workstation without any troubles. Please make sure that you've suttisfied all installation requirements as written in the Installation Guide.Install other version of Servis Pack. I am usinn SP6. Alo you can try to copy a sample database from cd without creating it
Yours.

Can Install Base be installed as a stand-alone module?

Hi,
Is Install Base always integrated with another module or can it be used as a stand-alone product?
Thank You,
Ellice

I believe the answer is in Chapter 2 of the Implementation Guide at http://download.oracle.com/docs/cd/B53825_01/current/acrobat/121csiig.pdf
HTH
Srini

Cannot install Leopard on G4Pbook from Disk Image

G4 Powerbook 1.67, 1.5GB RAM, 10.4.11
I have a backup of my Universal Leopard disc on a bare SATA drive that I use as an installer drive, via USB and drive adapter. Much faster than reading the DVD and no need to swap discs. Anyway, I was able to use it to upgrade my Mac Pro last year, but now that I'm finally getting around to my PBook it won't install from the external drive. I open the installer file but it tells me "the application cannot be run from this disk" and I can only quit. On other machines the installer ran and I was able to restart the machine to boot into the Leopard install. The 'Startup Disk' in the Prefs doesn't list the Leopard partion on the SATA drive as a viable system disk, so that may be the issue there. Do G4s have issues with seeing USB drives as startup disks?
I don't have the original Leopard DVD with me, so I need to come up with other options for installing. Target Disk from my tower and run the install that way?
TIA, JK

Hi
+Do G4s have issues with seeing USB drives as startup disks?+
Yes in the sense they won't work. AFAIK PPC architecture macs will only boot from certain external firewire drives - depends on the chipset. Oxford Semiconductor is one chipset that I know that works - there are others. I'm not absolutely certain but I think it's safe to say the later Intel Macs (last year or so) will boot from external USB drives as long as they're USB 2.
You should be able to boot your MacPro using the external drive (as you've done before) and target disk mode the G4 to your MacPro. It should present itself as a viable destination source when you run the Installer.
Tony

How do I install add-ons stand-alone(offline) ?

Everytime I do a Windows Reformat...I have to search out all the Add-ons I had and re-install them. Or... Save the "extensions" folder some place safe and put it back in its place. This is obviously shabby. Is there a way to actually "Download' an add-on and install it off-line?

and other sollution is
1st u have internet connection and download firefox and all its addons
in all this time before starting this procedure start VMware Thinintall
to make your .EXE ( executable file ) means any software of installation file ,
portable
so enjoy this trick
1st >download thininstall(VMware)
2 >install thininstall
3>run thininstall
4>prescan start
5>minimize it
6>start firefox installtion and all addons
7>all configuration u want in firefox
8>post scan in thininsall
9> build the project
10>start point - firefox.exe
so all 10 steps u give all sollution which u want to
whenver u want to run it just dubble click n its dont need to install firefox
its portable version
so whenwver u format ur pc u dont need to reinstall firefox and all addons u want to
just run firefox.exe which built in thininstall
its known as portable application of firefox
so even u want to run this application in another system just copy this application to pendrive and run directly firefox exe form pendrive
its portable so u donrt need to all hard work
enjoy this functionally
also u make any application portable via thinisall software
its have some limitations in future but this awosome,
quick respone on [email protected] if u like this post
thanks in Advanced !!

Cannot install Firefox at all - error message image failed to mount 0xe00002c9. Have OSX 10.4.11

Have tried to DL versions 3.5.13, 3.6.9, and 3.6.10 (not in that order). Only have Safari 4.1.2 as basic browser.
Automatic installer never opens, and when I double-click on the .dmg icon, I get error message 0xe00002c9.

Firefox 4 doesn't run on a PowerPC Mac.
Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html

Windows Media Player ActiveX not playing image, but WMP stand alone application does. Why?

I use my Windows Media Player v11 with additional codec to play mp4 files (mp4 are not supported by default with WMP 11, so I had to install a codec). It works fine in the stand alone application, but when I use the ActiveX control in NI, it does not use the codec and I get only the sound... no image. I thought the ActiveX was simply an interface to the same core application used by NI and the stand alone media player. And if it is the same core, it should use the same codec. What am I missing?
Solved!
Go to Solution.

I have a tip for you. If you download Quicktime 7(QT), you may select the QT activex player(see picture). It plays mp4 and looks better. And QT is free so it should not any problem. Try and see if it do you any good
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)
Attachments:
sample.PNG ‏114 KB

Install stand alone LR6 on second computer

How do I install LR6 upgrade (stand alone) on a second computer?

well, I started to but it seemed as though it was going through another purchse cycle, that is why I ask

"Stand-alone" Installer Problems

Hi there.
I was hoping that there may be someone here who can advise me with a problem we are having with the stand-alone installer.
The problems we are having suggest that it is in fact not a stand-alone installer, although hopefully someone can prove me wrong!
After ADE is installed, using the stand-alone installer, no matter how many timnes I attempt to load a document, the DE detector tells me that ADE is not installed, and asks me to install. This is a never-ending loop. That's what happens in IE7.
In Firefox, the detector does detect it, but halfway through the install it fails.
The result of this is we can't open DRM protected eBooks on any of our open-access PCs due to ADE not working, even though we have installed it using the stand-alone installer.
All PCs are XP SP3, browsers are IE7 and FF3.0, and users log into the PCs with basic 'User' privileges. Student's 'My Documents' folder is mapped to a network drive when they log on.
Can anyone help?
Kind Regards,
Ian Lundell
University of Sunderland, UK

Open the "Console" application from Application/Utilities folder.
Select System.log from the log list on the left.
In the String Matching filter field, type Adobe AIR or Adobe Muse.
Odds are the console will display the path to where AIR is finding a beta version of Muse.
If that's not the case, pleaseelect all, and the copy and paste the log into a text file or e-mail and send it to us at [email protected] along with a link to this thread (for context).
Thanks.

Error 10403 when using Stand-Alone Application and DAQPad 6020E

On the computer I have LabVIEW on, I can run my VI and also I can run the stand alone application of that VI. But I can NOT run the stand alone applicaiton of that VI on a 2nd computer with out LabVIEW. I get error # 10403. I belive I build the VI correctly and loaded the proper software/driver because I have found I can run a simple stand alone application VI that does not communicate with my DAQPad 6020E. The second computer does reconize the DAQPad 6020E under the Divice Manager. I tried using differnce divice numbers for the AO and AI...

Hi,
The first thing you need to check is make sure the same DAQ driver is installed on both computers. Then, you need to make sure that you can view the device in the Measurement and Automation Explorer (MAX). Once you can do this, then you will need to make sure the LV Run-Time Engine is installed on the stand-alone comp. This needs to be the same version as LabVIEW that is installed on the computer where the application was developed.
I hope this helps.
George

Cannot install Applcations in Stand-Alone Media image

Similar Messages

Maybe you are looking for