Cannot install Bluetooth Explorer

I am having the same lion/bluetooth problems that many others are. I have downloaded and installed Xcode with the intention of using Bluetooth Explorer. Xcode is installed. Explorer does not show when I option-click on the bluetooth icon. What am I missing?

Found it after long search.
It is no longer part of xcode, but can be downloaded if you register as an Apple developer under developer.apple.com
-go to "Mac Dev Center"
-go to "additional downloads"
-search for hardware and download Hardware IO tools for Xcode.
Best of luck.

Similar Messages

  • X100e - cannot install bluetooth drivers

    I cannot install bluetooth drivers on my X100e laptop. When I bought the laptop I had windows xp on it and bluetooth worked fine. But when I installed windows 7 I couldn't install bluetooth. When I try to install latest Bluetooth with Enhanced Data Rate Software II driver I get the message:
    "No Bluetooth device was detected. Please make sure that your Bluetooth device is pluged in properly in order to continue installation."
    please help.

    Hello,
    Try running Lenovo's ThinkVantage System Update software to install any missing ThinkPad-specific drivers and hotfixes, then repeat the Fn+F5 key combo suggestion.  Does Bluetooth now activate?
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Satellite L655-145 cannot install bluetooth stack

    Cannot install bluetooth stack. Setup programm just freeze. All other drivers installed successfuly. Device manager show only Bluetooth ACPI device. This problem appeared after updating BIOS from original version 1.80 to older (1.80->1.90->2.10->2.20). Downgrade to 1.80 take no effect.
    PS. Sorry for my bad english.

    Hi
    As far as I know the notebook is equipped with an WIFI and Bluetooth combo card!
    This means that Wlan and BT functionality is controlled by one card.
    If you downgraded the BIOS (dont know why) please set this to default firstly.
    Save the changes and reboot the notebook.
    Then download the BT stack from Toshiba BT portal.
    Enable the BT (FN+F8) and then start the BT stack installation once again.

  • WINE: Cannot install Internet Explorer 6 on 64-bit system

    Hi everyone
    I'm running the 64-bit version of Arch Linux, with WINE 1.3.2 from [multilib] and winetricks installed.
    When I try to install ie6 via winetricks (which I need for both work and a game I'm trying to install ), I get the following error message:
    The Windows Update: Internet Explorer and Internet Tools cannot be installed on this computer. This product does not install on 64-bit platforms.
    After closing this window (i.e. clicking OK), I get another error message, which informs me that "regsvr32.exe has encountered a serious error and needs to close."
    So, what gives? WineHQ shows claims of people being able to install it on a 64-bit Linux system; namely, Ubuntu and openSUSE... no Arch results, and I don't want to post "Garbage" if I'm doing something wrong here.
    If anyone would help me shed some light on this (and perhaps even fix it!) I'd be very grateful.
    Thanks in advance!

    I know about wine-gecko. However, that's not it
    edit: update to the problem: I've switched to bin32-wine-suse from AUR. Now I can install IE6, yay
    However, something's still bothering me.
    bin32-wine-suse complains about every wineprefix made by "stock" (multilib) WINE being a 64-bit environment, and thus impossible to work with.
    So the [multilib] WINE apparently makes a 64-bit Windows-like environment, whatever that would mean to them. I don't really think that's right, knowing how some apps - namely, IE6 and such - complain about this.
    Any ideas?
    Last edited by Wintershade (2010-09-13 06:45:32)

  • T440s cannot install Bluetooth driver on Windows 8

    After I uninstalled the previous version of "Intel Proset/Wireless Software for Bluetooth", I use the Lenovo System Update to download the newest driver and manually install it. But each time it displays the following figure:
    Please help me to fix it. Btw, I have used the microsoft installer clean up to check the previous version have been uninstalled completely. Thank you.
    Solved!
    Go to Solution.

    Let me answer this question by myself. After deleting all related items of "C:\Program Files (x86)\Intel\Bluetooth" in windows' registry, the installer of intel proset/weirelss can be processed successfully. Then, everything is working well now. I tried to figure out this problem these days, and finally it is solved. wuala~

  • Cannot install Firefox. WHen I click on the link to install, it takes me to an "error loading page" notice. My network connection and internet access are normal with Internet Explorer, so this is not the issue. Some kind of conflict with my settings or pe

    Cannot install Firefox. When I click on the link on the Mozilla website, it goes to an "error loading page". My network connection and Internet Explorer are fuctioning normally.
    == computer was recently wiped clean and am now reinstalling all previous software and applications ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)

    None of the stuff in " http://kb.mozillazine.org/Locked_or_damaged_places.sqlite " helps. I have tried and tried and I have even wipe the computer clean still didn't help. I got the same problem as he/she has got in the first posted. Can add some web pages but not all the web pages I want.. I should have never updated to 3.6.13... That's when it all started for me, from that version..... Now Version 3.6.14 is out, I was hoping the version 3.6.14 might would fix the problem wrong again....
    Funny thing is i can not even Bookmark Firefox.com!!!!!...lol
    So any ideas on how to fix it other than the link giving would help.
    Thanks.

  • Cannot find Bluetooth Preference Panel to install new Magic Mouse

    Tried to install a new Magic Mouse, but the computer does not see it. Bluetooth icon is not in toolbar, and Bluetooth Pane is not in preferences panel. Found bluetooth.prefPane file in HD>System>Library>PreferencesPane, double clicked on it, but got the error message -- You cannot open "Bluetooth" preferences pane because it is not available to you at this time. You might need to connect a device to your computer to see the preferences pane.
    Installed new batteries in Magic Mouse, but it still is not seen by the computer.
    Note - I have not used Bluetooth devices on this computer before.
    Suggestions?

    In the past, Apple have specifically recommended and supported the D-Link DBT-120 USB Bluetooth Adapter, but that one is quite old now, so you may have difficulty finding one.
    http://www.dlink.com/products/?pid=34
    They now appear to be recommending the Targus ACB10US adapter:
    http://support.apple.com/kb/HT3940
    There are literally dozens of other USB Bluetooth Adapters on the market, but not all are 100% Mac compatible, so definitely try before you buy, or buy from somewhere that accepts returns.

  • Cannot see Oracle Explorer after installing ODT10104

    After installing ODT10104 on Windows XP I cannot see Oracle Explorer in my View menu group. I'm using VS 2005 and I installed ODAC92070 but still cannot see Oracle Explorer. The install of ODT was successful but an exception occured while getting vaues from my register. Here is an excerpt of the generated log
    "....Starting install Install Phase 2 of component Oracle Developer Tools for Visual Studio .NET
    Calling Query w32RegQueries10.1.0.2.0 RegKeyExists
    Key = HKEY_LOCAL_MACHINE
    SubKey = SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{FA7E3351-448B-4BDA-986F-8CB3DA36CE5D}
    Query Returned: true
    Setting variable 'b_IsVSIPInteropInstalled' to 'true'. Received the value from a code block.
    Calling Query w32RegQueries10.1.0.2.0 RegGetStringValue
    Key = HKEY_LOCAL_MACHINE
    SubKey = SOFTWARE\Microsoft\.NETFramework
    Value = sdkInstallRootv1.1
    Query Exception: GetValueKeyNotFoundException
    Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
    C:\Program Files\Microsoft Visual Studio .NET\FrameworkSDK\
    Setting variable 's_gacutilPath' to 'C:\Program Files\Microsoft Visual Studio .NET\FrameworkSDK\'. Received the value from a code block......."
    What key values is missing in my register which may cause the install of ODT to fail?
    Mike

    I installed version of ODT 10.2.0.2.20. I now have the menu item 'Oracle Explorer' but when I click on it system returns error Package Load Failure...Package 'Oracle Developer Tools for Visual Studio .NET has failed to load properly ( GUID = {D601BB95-E404-4A8E-9F24-5C1A46246CE} )
    I'm using VS 2005, not 2003. Any ideas how to fix?
    Mike

  • Cannot install Win 8 on a late 2013 iMac using bootcamp on 10.9

    I'm trying to install Win 8 on a late 2013 iMac (purchased a couple of months ago)
    I have a win 8 pro DVD, but obviously there is no DVD in this iMac. I usally use the DVD drive in my older 2009 iMac for any disk based installs but I can't appear to use it here.
    I followed the instructions and downloaded a Win 8 Pro ISO from Microsoft to use with my authentication code, created a bootable USB using bootcamp, created the partition and rebooted. Once I'd entered the code I get to the install location but it says I cannot install on the partition created by bootcamp. Even if I format the partition it says I need a GPT drive but I have MBR, so won't let me install.
    I tried several suggestions including creating aprtitions in various other programs and once I even got past that screen, but as soon as it tried to install I got another error saying the MBR was formatted incorrectly and it failed.
    I had no issues installing Win 7 via bootcamp on the older iMac, but this one has me stumped. I used to think I knew a bit about computers, but I'm fairly new to Mac related issues as the older iMac has always just worked.
    Any help would be greatly appreciated.

    Hello,
    I just installed Windows 8.1 on my Late 2013.
    There are just a couple of things I had to do that deviated from the Boot Camp Installation Manual.
    1.  I downloaded my copy of Windows 8.1 as an ISO image AND as a bootable USB from the Microsoft site.
    Not sure why I did that but it came in handy because Bootcamp was taking a very long time to copy the ISO onto the USB stick..
    The ISO copying seemed to freeze up, but it's likely that it was just taking a long time, probably 20mins.
    So, instead of waiting, I took the contents of the the USB startup stick and simply moved them over to the stick that Bootcamp had formatted for the ISO copy (I cancelled that copy function and deleted any files that had copied but didnt complete).
    Once that was done, the machine rebooted from the USB stick and began the normal Windows setup process.
    All went very smoothly except that my mouse was not working.
    2.     To get around the mouse issue, I simply plugged in a MS USB Mouse and it worked immediately.
    The Bootcamp manual advised that the way around this was to 'click in upper right corner and search for Bootcamp'.   Problem was, it was nowhere to be found.
    So, using my MS mouse, I navigated to the 'DESKTOP' icon in Win 8.1 and found File Explorer, which showed my USB stick connected along with Bootcamp and the MS Support File (i.e. All the Apple Drivers).
    I began manually clicking on all the driver files until realizing that there IS a Bootcamp executable which will automatically install the drivers for the Nvidia card, keyboard, camera, mouse, etc....
    Once that was done, my installation was completed.
    The entire process took about an hour, but now that I've done it, it really shouldnt take much more than 45 mins.
    I have the late 2013 iMAC, with the GTX780M and 1TB Fusion Drive i5 Quad Core.
    For those who are leery about doing this, please note that I'm a PC 'lifer' and this is my very first go-around with doing anything on an Apple product.
    It all went much more smoothly than I could have imagined, but if you are not a PC person, you might be a little challenged finding the Bootcamp in File Explorer or doing anything in Win 8.1 to get over these minor hurdles.
    Good luck!
    I'm looking forward to getting STEAM up and running to see how this thing games!

  • Cannot install any version of IE

    Hi there,
    I am having some issues with one of our Terminal Servers, which is running Windows Server 2008 R2 64bit. It did have IE9 installed and when tried to upgrade this to IE10 or IE11 it was failing with the error "Internet Explorer did not finish installing".
    There is no much helpful info in the event logs either.
    So, following some other advice on here, I was pointed to the fact it could be that IE9 was corrupt and could be upgraded. I was advised to remove IE9 and try installing it again and then go through the upgrade process. However, there is an issue here. Once
    IE9 was removed (through Uninstall an update in Control Panel), IE8 wasn't there. I still cannot install IE 9, 10 or 11 on this server now. What's also a concern is that now I cannot open Event Viewer or any other MMC as it shows an error about MMC will not
    run with a version of Internet Explorer earlier than IE 5.5.
    Any tips or ideas on how to resolve this?

    You can ask them in IE forum: https://social.technet.microsoft.com/Forums/ie/en-US/home?forum=ieitprocurrentver
    They are more familiar with this.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Cannot install driver, plz h

    i just got a new hard dri've installed and once i installed all the windows updates and everything else i installed my creative zen vision m and it cant install the driver for it. It recognizes it in device manager and has an ! next to it but under windows explorer it doesnt display it, or in wmp or any creative software. I try updating the driver in device manager with the creative disk in and it says cannot install this hardware. PLEASE HELP

    Thank you for the information, Harry. If you are installing from the HP CD which came with you then let us check with downloading the All-in-One software from the hp website and then check for the result.
    First of all you need to uninstall the software which was already installed on your Vista computer , then we need to download the software and install the All-in-One software.
    Here are the uninstallation steps to uninstall the software from the computer:
    To completely uninstall the software, run the uninstaller at level three using these steps:
    1. Turn the All-in-One off and disconnect any USB/Ethernet cable from All-in-One to computer.
    2. Insert the all-in-one CD-ROM into the computer. Cancel any installation windows that appear.
    3. Click Start on the taskbar and then click Run.
    4. In the command box type the following command and press Enter key:
    X:\Util\CCC\Uninstall_L3.bat
    (X: is the CD-ROM drive letter of that the all-in-one CD-ROM is in)
    Follow the above steps to uninstall the All-in-One software and then restart the computer .
    Then download the software from the below web link:
    full feature software in vista
    Click on the above link and open the web page,after you open the above link click on download only button and save the file onto your desktop.
    Here are the instructions to install the All-in-One software:
    1) Unplug the USB cable from the back of the computer
    2) Install HP Software using downloaded file => Double click on downloaded file => Choose Run and follow the onscreen instructions
    3) Before starting the installation disable the antivirus and firewall and then proceed with the installation.
    4) Plug in the USB cable when it prompts to connect in the midway of installation
    Note : It is important that you connect the USB cable only when the software prompts you while you are installing the software.
    Once you install the All-in-One software check for the result and let us know.

  • I cannot install adobe reader. I get so far and get the message "Error 1324. The oath All folders or the volume is invalid. Please enter it again" can you help?

    i cannot install adobe reader. I get so far and get the message "Error 1324. All folders or the volume is invalid. Please enter it again" can you help?

    We need to know if any registry settings are causing this error.  Please follow these instructions:
    from Windows Start | Search: type regedit and hit Enter; you will see a window like this
    now click on the little arrow ▹ left from HKEY_CURRENT_USER
    Next click the arrow ▹ beside Software, then Microsoft, then Windows, then CurrentVersion, then Explorer, then click on User Shell Folders
    all entries on the right side should start with %USERPROFILE%
    If you have anything different, this may be the cause for the install failure.
    Now you need to repeat the same thing for another key:
    ▹ HKEY_LOCAL_MACHINE ▹ Software ▹ Microsoft ▹ Windows ▹ CurrentVersion ▹ Explorer ▹ User Shell Folders
    Here all entries should start with %PUBLIC% or %ProgramData%.  If you have anything different, this may also be the cause for the install failure.

  • CANNOT INSTALL OR UNINSTALL ADOBE READER X (10.0.1)

    CANNOT INSTALL OR UNINSTALL ADOBE READER X (10.0.1) FROM ADD AND REMOVE PROGRAMS BUT GET THE Error 1402.Could not open key: HKEY_LOCAL_MACHINES\SOFT\SOFTWARE\Microsoft\Windows\Current\Version\Run\Optional\Componen ts\MSFS.Verify that sufficient access to that key, or contact your support personnel

    Thank you guys. Claudio, I could get the file to open. Said I was unable to open FTP files in windows explorer. Thank you anyway fro your reply.
    Will...thanks. Went to that enterprise site and downloaded Reader 9.0 then updated to my old 9.4.3. now everything is back to pre 10x days. Bless you for saving my sanity.

  • How to install Internet Explorer in Mac

    Dear Concern
    Please suggest to me how to install internet explorer in mac
    Anwar

    KJHaymarket wrote:
    I am responding to the second post questioning "Why do you want to do this?"
    I am a new Mac user and have just encountered a third part software that does not appear to be supported through Safari; thus I am receiving the following message when I attemt to log onto the system:
    "Our system currently supports the following browser versions: Internet Explorer 9, Internet Explorer 8, and Firefox 4 through Firefox 7. We have detected that you are using an unsupported browser. While you still may be able to use the system, depending on the browser, it is possible that you may run into technical issues that we cannot support. Please consider installing one of the browsers listed above to improve your experience with our system."
    Bypassing this message only yields a Server Runtime error.
    Why don't you just download Firefox, 4 through 7 are supported, or if you insist on using Internet Explorer, use Windows.

  • Where can i find Bluetooth Explorer on Mountain Lion??

    I have been searching for it for ages, all i want to do is to change the bitrate to 53 as my bluetooth speaker is plaing some crackling music. 

    Trevor, hi.
    It appears there are two programs called 'Bluetooth Explorer'. One made by Apple, which is part of the Xcode toolkit. And the above-mentioned one that is made by a private developer and is available in the Appstore.
    I've got the feeling you are looking for the Apple made one, since that does give you information about the BluetoothAudioAgent. (something the Appstore one doesn't do) This program used to be installed as part of the Xcode toolset. But is now made available separately in a bundle called 'Hardware IO Tools for Xcode' (can be downloaded from the Apple developers webpage --you'll need a (free) developer account)
    Now, that being said, you will indeed be able to change the audio bitrate with it. But Bluetooth Explorer does not give one too many options, for more improvemtents you will need to edit the plist: ~/Library/Preferences/com.apple.BluetoothAudioAgent.plist
    The Bluetooth Explorer is however very good for debugging the edits you made to this file.
    For some good starters on editing said file, settings that on my system provide excellent audio quality (much better than default), i'd refer you to this webpage: http://mariusvw.com/2011/06/16/how-to-fix-the-crackling-bad-sound-of-bluetooth-a 2dp-headsets-or-speakers-on-mac-os-x/
    Best of luck! Greets,
    Jesse

Maybe you are looking for