Cannot install Boot Camp on my imac 27

Hello, I´m using Bootcamp to install Windoes on my Imac, afteri downloaded the Windows Support Software i couldn´t copy it/ burn it. When i tried to burn on a disk nothing happend after i pressed the ¨burn¨ button.
I need some help here!
Thanks!
P.S: English is not my main language.

Don't bother downloading the windows support software. You don't need it.
If using Windows 7 http://support.apple.com/kb/TS3173
If you're using Win 7 Copy the file form the support document on to a USB stick formatted to FAT32
If you're using Vista/XP ignore the support article
Open Bootcamp utility and create partition and follow instructions
Reboot when it asks you to with the Windows installer disk in.
Follow instructions with the windows installation.
When windows is set up, insert your iMac install disk (grey one)
and it'll auto run and install the drivers you need.

Similar Messages

Cannot install Boot Camp 3.2 upgrade for Windows 7 64 bit

I recently installed Windows 7 64 bit on my macbook. I also installed Boot Camp 3.0.1 after Windows 7 installation, however, WiFi did not work. Therefore, I needed to upgrade to the latest Boot Camp 3.2. However, when I tried to install Boot Camp 3.2 upgrade for Windows 7 74 bit, I got an error message saying that I needed Boot Camp 3.1 installed first. I CANNOT find Boot Camp 3.1 upgrade for Windows 7 64 bit on Apple website at all. Can someone please help me on this? Is there a way to get the complete Boot Camp 3.2 package that can simply be installed on version 3.0.1??

here is the link to bootcamp 3.1 for windows 7 64 bit http://support.apple.com/kb/DL1336 .. and no there is no package that can be applied to the windows side to go from 3.0.1 to 3.2

Black screen after installing Boot camp Win7 on iMac 27 late 2009

I've run out of ideas as to how to fix this problem. I have a late 2009 iMac quad i5, Mountain Lion, 12GB RAM, 1TB HD (recently exchanged under extended warranty).
I stopped counting how many times I have tried to get this up and running but I followed a whole bunch of 'how to's' on the net, including the official Appple guide, but I always end up with a black screen. I insytalled it from scratch using both, Apple drivers on CD and SD card and I can confirn that they installed correctly during my last try. That time I first installed Win Vista, then upgraded to Win 7. I took out the install DVD after first restart and left the SD card in its slot (correctly named, as suggested by Apple). the installation finished, the screen went dark for about 5 min, then the computer rebooted, the screen went dark again for another few min and after that the vomputer restarted again but this time all stayed dark and nothing happened for the better part of an hour.
I also restarted from the Win install disk and tried to remove the ATI drivers using command lines, as suggested in one post.
I need to run Win in Bootcamp because some application I use are very demanding so I need Win to run natively. In an earlier attempt I managed to boot Win7 from the Bootcamp partition in Parallels and I installed the Apple Drivers in that environment but it still resulted in a black screen. I also tried to remove the ATI drivers from Drivers directory manually in MacOS mode but the System wouldn't let me edit the Syustem folder at all, not even in Root user mode.
I understand that I'm not the only one with problem and I feel for you, but please refrain from "me too" posts becuase it doesn't really solve my problem. Thank you.

I presume that you've followed the instructions for sideloading the iMac Windows drivers into your install via USB stick? (wasn't aware the EFI recognized the SD slot as storage on boot. Now i know)
I always found more success in just slipstreaming the drivers and install.xml file onto a custom Win7 DVD rather than the USB approach when trying with my Late 2009 27" iMac. The Win7 installer needs that enclosed .xml file in the driver package to tell it where to find the drivers so that they be loaded when the Win7 image extracts itself.
If you're using mountain lion, then you should be receiving the proper Win7 driver set. If you wanted to create a custom image, then you can use an ISO file, the driver package and disk utility to make something you can use. Either that or you learn what edits your install.xml file needs to point the installer properly and check it manually.
I don't know what links you have so i'll just include everything:
Installing boot camp on a Late 2009 iMac:
http://support.apple.com/kb/TS3173
Direct link to Late 2009 iMac-specific Windows drivers.
http://support.apple.com/kb/DL995
I'd try a USB stick and the iMac-specific driver set. It should steer your insolent windows installer correctly.
Hope this helps.

Cannot install boot camp 3.1 on my leopard macbook pro !!

the upgrade patch cannot be installed by the windows installer service because the program to be upgraded maybe missing or the upgrade patch may update a different version of the program. verify that the program to be upgraded exist on your computer and that you have the correct upgrade patch. this is the error that i get when i try to install the boot camp update!

Hey guys...
I've got the solution of this problem...
The Windows part of the Bootcamp installer furnished by Apple *****!!!!
When you insert the DVD install of Snow Leopard, the AUTORUN launch the CD/DVD Sharing for Macbook Air ONLY, but not the BOOTCAMP INSTALLER...!!!!!!
I didn't see that at the first try, because we are using Macs, and we don't have habit to read AAAALLLL the stuffs we got on the screen, but, we should do!
That why, when you try to install the Bootcamp 3.1 updater, it doesn't work...
This updater ***** too!!! There's no warning message: The installer launch, then stop without no advertisement, and we don't know what to do and what's happening....
So, to resolve the problem, launch MANUALLY the BOOTCAMP 3.0 Installer from the Snow Leopard DVD installer:
Go to Windows Menu and select "Computer", then click on the DVD icon in the left side bar to browse it, open the folder "Bootcamp" on the DVD's root, and run the SETUP program...
It would take several minutes, and you will get many bullet messages from windows, informing you that many drivers are being installed...
When it's done, restart...
After reboot, launch the Bootcamp 3.1 updater.. IT WILL FINALLY RUN!!!!
Restart....
That's it....
To Apple staff:
Why did you do an installer "a la Microsoft"???

HT1237 Trying to install Boot Camp on my iMac but my model isn't listed above (model identifier iMac 8,1), could it be a mistake or is there no new firmware for it?

I have no idea whats wrong but imac 8,1 dosnt show on the list someone help please?!

the 2 are unrelated, you already have boot camp assistant as an application on OSX, if the firmware page doesn't show an updated firmware for your machine then there's no update available

Cannot install boot camp with yosemite

I get an error about needing a single partition for the iMac HD

That is your Recovery Partition most likely. You can check by enabling the Debug menu in Disk Utility.
Disk Utility Debug Menu

Windows corrupts itself, errors installing Boot Camp 2.0 & 2.1

Mac OS 10.5 is working just fine, however upon partitioning and installing Windows XP Pro w/ SP2, I have nothing but problems! Windows update will not work, cannot install Boot Camp 2.1 without errors (says files are corrupted, even though I have re-downloaded the file a dozen or so times). After a short while of rebooting and attempts to install updates, Windows corrupts itself; IE will not open, Windows explorer crashes regularly, and no installation files will open without errors. Safari for windows barely works. I have attempted formatting and reinstalling the system 4 times now, both FAT and NTFS, using different Mac OS X disks for boot camp software, but I get errors every time. It seems I cannot install anything without errors. Also, windows seems to degenerate, each time I boot up the computer windows gets progressively worse, more errors, more problems.
I have checked and all of my EFI and SMC software is up to date.
Everything is working just fine on my Macbook (different computer), which used the same procedure.
Macbook Pro Core 2 Duo 2.33ghz, 3gig RAM, 160HD, X1600, DL-DVDR
Mac OS X Leopard 10.5.4 Windows XP Pro w/ SP2

Solution found: Bad memory module (stick of RAM). After removing the bad stick, windows runs normally, updates are smooth.
Used "Remember" application to confirm memory is bad.
http://www.kelleycomputing.net:16080/rember/
Will contact Applecare regarding bad memory.

Unable to install Boot Camp 3.1 on Win 7 on iMac Intel (suggestions?)

I got the OEM version of Windows 7, professional and 64 bits, and installed it via Boot Camp Assistant. Got it running (no keyboard recognition), and tried to install Boot Camp for Win 7 via the Apple site:
"Unable to install 3.1, needs 3.0".
No problem, insert OSX disk (10.6.3), click, aaand:
"Boot Camp 64bit is not supported on this model"
Uh?,... I thought that my machine was supported (it's running Win7 64bits!),... any suggestions?. Am I doing something wrong?. Any help will be appreciated.

Unfortunately I cannot answer your question but I'm hoping someone can help us. I went a step further than you. I have an iMac 8.1 Intel Core 2Duo 2.8 GHZ Processor (early 2008). I spoke with Apple Customer Support and made it clear that I had Windows 32 bit and 64 bit software and wanted to install on my iMac and MBP. The agent told me to order Snow Leopard for the iMac. I found out tonight I cannot use 64 bit on this particular iMac even though Customer Support had the serial number and data when we ordered the Snow Leopard disc.
So, I partitioned the HD equally between Mac and Windows. Boot Camp installed Windows 7 with no problem and then encountered the same thing you did. Install Boot Camp 3.0 before 3.1. When I put the brand new Mac OS X Snow Leopard from Apple in the iMac it said 'not supported'. I tried to install but it won't.
Funnything is Win 7 seems to be running. I am having problems with the numeric keyboard on the UBS keyboard. I haven't really tried to do too much.
My question to append to yours is how do I go about uninstalling Windows 7 and installing Windows 7 32 bit?
I'm sick about this but at least I believe I can install the 64 bit on my current MBP. I wanted it on both my computers.

How do i install boot camp on a brand new 3tb iMac osx 10.8.2

how do i install boot camp on a brand new 3tb iMac osx 10.8.2?

Note: At this time BootCamp doesn't support 3TB drives - this is due to a memory allocation issue with Windows. Check out this article on a/an (unreliable) work around. I say unreliable because some people are reporting success and others failure. At this time if you really need Windows it probably would be better to use virtualization software like Parallels, VMWare, or VirtualBox.

Cannot boot from XP CD when installing Boot Camp

I've tried several times to install XP with SP2 on my Mac Pro. I was successful installing Boot Camp with OS X 10.4. I did a clean install of OX 10.5.
My Mac will not boot from the XP CD once I'm told to re-boot while installing Boot Camp. I've tried holding the "C" key to force it to boot. It still will not boot. I can only get back into Max OS X by holding the "Option" key during boot up.
I have verified my XP disk and all looks good.
Has anyone else seen this and is there are work around?
Thanks!
Rick

Hi
It seems the drive cannot boot up from the CD recovery and switch to the LAN boot.
The PXE-E61 error message appears because the LAN cable was not connected and the notebook is not able to find a network boot source
I think you should check the recovery CD and maybe you will need a new one

HT4718 If my mid 2011 iMac didn't come with a disk then how do I install boot camp

I'm looking on YouTube how to install boot camp and they are all saying I need a disk and I haven't got one?

Open Boot Camp Assistant, click on the Print Documentation button. Read carefully.

How to create extra partitions for windows 7 after installing boot camp

hello
i am pretty new at imac so bare with me and i really need help.
IMAC
OS X version 10.9.5 ( i think its os X mavericks ??)
iMac 21. inch , Late 2013
iMac model identifier iMac 14,1
i installed boot camp windows 7 and it works perfectly, after i tried to create two partition using disk utility for windows 7 (ms-dos) format because i really want to separate my files on other partition instead of everything on Boot Camp drive. after i restart choosing windows OS i cannot go back to windows 7.
i hold option on the keyboard but does not show window 7 so i went back to Apple ox s , found my boot camp hd on the desktop with files in it. checked boot camp assistance showing
" The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows. "
i read alot of article about but i don't seem to understand much about
i understand alot of people created these kind of topics
please if someone can help me solve this problem again
i only want an apple os , boot camp for windows 7 and 2 extra partitions for storage , my hard drive is 1TB
thank you

Last login: Mon Feb 16 16:11:46 on console
YLFs-iMac:~ ylf$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            999.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *8.0 GB     disk1
   1:                 DOS_FAT_32 WININSTALL              8.0 GB     disk1s1
YLFs-iMac:~ ylf$ diskutil cs list
No CoreStorage logical volume groups found
YLFs-iMac:~ ylf$ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1953525167
       start        size index contents
           0           1         PMBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1951845952      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1952255592     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1953525128           7
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header
YLFs-iMac:~ ylf$
Also i do not have boot camp installed yet because like i said, it messed up my boot camp after i created the partition thats why i removed boot camp, right now i only have APPLE OS

Bluetooth Keyboard/Mouse/Trackpad won't automatically connect after installing Boot Camp

Hey guys!
Another peculiar thing happened to me today with my 3-week-old maxed-out 2012 iMac (other than it kernel panicking when I powered it down the other day...did I mention this was 3 weeks old?).
After installing Boot Camp which I will never do again, my iMac (on the OS X side) no longer recognizes my stock Apple Wireless Keyboard, Magic Trackpad, or Magic Mouse automatically, until I press a button on the keyboard and wait 5 seconds, click the trackpad and wait 5 seconds, or click the mouse and wait 5 seconds.
(The Windows 8 Boot Camp side pairs with the devices immediately after Windows boots, which leads me to believe that the bluetooth devices are defaulting to look for Windows.)
One of my huge fears I had when considering purchasing an iMac is that the Bluetooth devices wouldn't immediately connect. Being a power-user with former Mac notebooks and working understandably fast having owned a web development company for 8 years now and not having to worry about Bluetooth device pairing, I'd like to think this fear is substantiated. But after first use (before installing Windows 8 with Boot Camp Assistant) it functioned normally and the iMac would automatically discover my peripherals and connect them by the time time computer turned on. I also had no trouble holding the Option key on boot to select a boot device....
Now, ever since I set up Windows 8 on the Boot Camp partition and paired the keyboard/mouse/trackpad to Windows, the Mac side completely ignores the keyboard/mouse/trackpad until I click a button on each.
I'm trying to keep it together but this is raging me out.
I went into Windows, immediately unpaired the 3 peripherals from windows and now use a wired keyboard/mouse with Windows (yay, desk space!), deleted the items entirely from the bluetooth panel, then booted to Mac and did the same thing. I then re-paired the devices to the OS X side andddd...no go! Still doesn't find them automatically. I am extremely upset by this and can't seem to fix it.
To summarize, my two issues are:
A. The iMac in OS X does not automatically recognize my bluetooth peripherals until I click a button on each and wait a couple seconds for them to pair.
B. I cannot hold Option to select a boot device (or choose Windows/Mac for example) because the computer doesn't recognize the keyboard until OS X boots and I press a key.
Please...for the love of god...someone help me, and stop me from formatting my entire computer over this issue.

I don't have a logitech mouse, but is it possible that the mouse is going to sleep during the reboot, and is thus unavailable when the OS is looking for it?

Why Isight is missing?, how to fix boot camp on 2008 iMAC using windows 8.1? can't redownload Lion.

Basically I'm troubleshooting, I have been having problems with my webcam ever since I installed a new hard drive, it seem's to be turned on due to the light above so I'm sure what else to do about it because both Windows/Mac OS aren't picking it up.
At first I thought there be some 'drivers' from the boot camp files that I could manually install, like I did with the other devices but that didn't seem to work for the camera. Also I hear Windows would be fine using either Boot Camp 4,5 to download the appropriate files but each time I try anything I get something about 'unsupported hardware' because before I could install Boot Camp 3 fine but before I was running under 32bit Windows because I hadn't realised at the time that the Mac was using 64bit so it seems like it has something to do with the conversion from 32 to 64 bit but that wouldn't make much sense the Mac OS as far as I'm aware was always 64bit.
And I noticed if I try to be download via the Mac side for the boot camp files then I get 'The Windows support software is not available' but to be fair I have never had any luck in the past with getting those files off the mac side ever.
So in short 2 problems Webcam, Boot Camp need to work but are currently having issues.
Also I can't redownload 'Lion' since it's been saying 'item not available', which is rather frustrating since I originally paid for it, I'm forced to stick to Snow Leopard, I'm baffled to why I can't redownload from my history like I do with Xbox or Steam.

Couldn't edit the question so thought add that the Imac camera light is turned on while using Windows, the Mac OS so it should be connected but it isn't.

Can't install boot camp(Am in desperate need of help!!!)

Ok, the story, I will try to make it short:
-Got my Imac a month ago. Installed Boot Camp Vista Home Premium 64 Bit. No problem. Ran smooth.
-Later I got VMWare fusion and decided to check it out. Didn't like to to much, but now I can't install Boot Camp.
-When using Boot Camp assistent, it creates my partition(which 200 GB) Fat32! The problem is, when it wants to boot to install. It ejects the Vista installation DVD! No matter what I do.
-*If I hold down the ALT key(option button) during start up*, it will show a grey screen with two options(The Macintosh HD and the Windows Partition). Selecting the Windows partition gives a black screen with an error; *"non-system disk press any key to reboot"* Only problem is that the keyboard was dead or frozen so had to crash the machine.
-Pressing D on start up to enable the *Apple Hardware Test* showed no problems.
-Pressing Alt + Cmd(command) + P + R to *delete the NVRam and PRAM*, did not have any effect. I think I did it right though, because there came a second start up sound.
-Pressing S + Cmd(command) on start up to run *User Single Mode*, with the command; "/sbin/fsck -fy" did not reveal any problems either, except for a weird long messege that kept coming up, and which interupted the line I was writing on several times. The messege was as follows: +":/root# AppleUSBEHCI[0x6e8t000]:: Found a Transaction Past the completion deadline on bus Oxfd, timing out!(Addr: 6EP:4)"+
*Ran a program called Partition Inspector;*
* Report for internal hard disk *
+Current GPT partition table:+
+# Start LBA End LBA Type+
+1 40 409639 EFI System (FAT)+
+2 409640 1531068455 Mac OS X HFS++
+3 1531330600 1953525127 Basic Data+
+Current MBR partition table:+
+# A Start LBA End LBA Type+
+1 1 409639 ee EFI Protective+
+2 409640 1531068455 af Mac OS X HFS++
+3 * 1531330600 1953525127 0c FAT32 (LBA)+
+MBR contents:+
+Boot Code: Unknown, but bootable+
+Partition at LBA 40:+
+Boot Code: None (Non-system disk message)+
+File System: FAT32+
+Listed in GPT as partition 1, type EFI System (FAT)+
+Partition at LBA 409640:+
+Boot Code: None+
+File System: HFS Extended (HFS)
+Listed in GPT as partition 2, type Mac OS X HFS++
+Listed in MBR as partition 2, type af Mac OS X HFS++
+Partition at LBA 1531330600:+
+Boot Code: None (Non-system disk message)+
+File System: FAT32+
+Listed in GPT as partition 3, type Basic Data+
+Listed in MBR as partition 3, type 0c FAT32 (LBA), active+
I don't know what any of this means, but I suspect the Boot Camp partition is the last one. I wonder what "Boot Code: None(Non-system disk message" means!?
*When running diskutil:*
*diskutil list*
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *931.5 Gi disk0
1: EFI 200.0 Mi disk0s1
2: Apple_HFS Macintosh HD 729.9 Gi disk0s2
3: Microsoft Basic Data BOOTCAMP 201.3 Gi disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: FDiskpartitionscheme *931.5 Gi disk1
1: WindowsFAT32 My Book 931.3 Gi disk1s1
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: FRMCxFREDADVD *3.5 Gi disk2
*And when I searched on the boot camp disc specificaly:*
Device Identifier: disk0s3
Device Node: /dev/disk0s3
Part Of Whole: disk0
Device / Media Name: Untitled
Volume Name: BOOTCAMP
Mount Point: /Volumes/BOOTCAMP
File System: MS-DOS FAT32
Partition Type: Microsoft Basic Data
Bootable: Is bootable
Media Type: Generic
Protocol: SATA
SMART Status: Verified
Total Size: 201.3 Gi (216110792704 B) (422091392 512-byte blocks)
Free Space: 201.3 Gi (216109285376 B) (422088448 512-byte blocks)
Read Only: No
Ejectable: No
Whole: No
Internal: Yes
Other things I tried:
-Tried going into Startup disk, to force Vista to install from boot up, but it ejected upon startup anyway.
-Tried rebooting while holding down "C" to force a startup from a CD/DVD. Vista installation DVD still ejected.
-Tried reinstalling Leopard with the Leopard Installation Disc 01, but it also ejecred upon rebooting to install! < This lead me to believe that it's my Superdrive that is messed up, but it plays DVD Movies just fine, and I even just now just burned the Vista installation DVD to my desktop in a .dmg file. So I am not sure if that is it!
-I tried taking a different Windows Vista DVD(Windows Vista 32 Bit Home Premium) to see if it could install from that. It could not, and ejected upon startup like the Leopard and 64 Bit Home Premium Vista Installation DVD!
I am new to Mac, but I am desperate after getting boot camp to work again. I have litterly been trying to figure this out for days, and I can't get it to work. I tried to call Apple but they couldn't help me.:( I could really use your help. I just want it to work.
And speaking of working, I haven't been to work for two days, because I have been home trying to figure this out. It's critical that I get boot camp working. So please, mates, can't you help me.
I simply don't know what to do:(
Cry
-Oil Pedestal

Does [this firmware update|http://www.apple.com/downloads/macosx/apple/firmware_hardware/imacefifir mwareupdate13.html] apply to your machine? If so, putting it on may fix the boot from DVD problem.

Cannot install Boot Camp on my imac 27

Similar Messages

Maybe you are looking for