Cannot install camera driver

I just bought a new ideapad s205 and i installed windows 7 x64 on it. windows installed a generic driver for the camera, a 2006 driver, and i cannot change it...windows says it's the best driver. the problem is that the image is very dark...you can only see shades... i downloaded the driver from lenovo, installed the bison software but that does nothing to change the driver...
where can i get the drivers for this camera...the drivers alone to change those that windows installed?
thanks in advance...

http://www.testmycam.com/

Similar Messages

Satellite A40-151: Cannot install display driver from Intel site

Trying to update display driver on the A40-151. Have downloaded latest driver from Intel which very helpfully states 'You cannot install this driver, please contact your vendor' no more clues.
Toshiba site only seems to have the 6.13.10.3514 version which is the same as that which came with machine. Am I therefore stuck with no possible upgrades?
The current driver seems not to be 100% compatible with Directx 9.0c * Sigh *

Hi
What Intel graphic card was installed on your notebook?
Is it a Intel 852GME 16MB-64MB shared memory graphic card???
I have found nice information on the Intel page and it seems that the graphic card hardware does not support the DirectX9 but only the DirextX7 and DirecttX8
The graphic driver from the Intel page will not help you.
Firstly you will be not able to install it because its not designed for the Toshiba notebook usage and secondly the hardware does not support it.
But I give you one tip if you search for a earlier driver version.
Some notebooks use the same graphic cards. Try to search for the driver in different notebook series with the same graphic card .
But the new installation will nothing change. The DirectX 9 API is not supported

Cannot Install Graphics Driver for windows 7 64 bit...

Hi... I cannot find a suitable amd driver setup file for my windows 7 64 bit machine of HP.. Can anyone help??!!

Hi:
Please see my reply to your other post at the link below...
http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Cannot-Install-Graphics-Driver-for-windows-7...

Cannot install LAN driver for my "KT6 Delta Series" motherboard

I've got this motherboard (KT6 Delta Series). Bought it second hand recently and I haven't got the original MSI driver CD. I downloaded all the drivers from the MSI website (http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=474&kind=1) but I'm not able to install the driver for my onboard LAN.
I just get a yellow dot on the ethernet controller under unknown devices in my device manager. When I try to update driver from device manager by searching the folder where I unzipped the driver, I just get a message saying something like "no driver could be found for this device in the selected folder... will you connect to Windows Update to search for a driver...?". I've also tried to install it the hard way by selecting "from floppy disc" and browse for the "b44win.inf" file inside the "WinXP" folder in the unzipped driver folder... but I stilll get an error message... saying something like "can't find any information of the hardware in the selected folder"... it's a bit difficult for me to describe the messages correctley because not English Windows version.
I've downloaded both LAN drivers for this card from MSI download site (http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=474&kind=1). Both "Broadcom 5788 LAN Drivers" and "Broadcom 4401 LAN Drivers" and non of them will install on my system. I've also tried downloading from the Broadcom website (http://www.broadcom.com/drivers/downloaddrivers.php). NON of them will install (
I've just formated my harddrive with fresh Windows XP install... The only software already installed is drivers for my motherboard and AGP card. No other software that can make any conflicts. When I connect a network cable to the onboard LAN the yellow light goes on so it seems the card itself is working.... but where can I get a driver that will install???
I've also tried connecting another network card (realtek 10/100) and connected my ADSL internett through it... and used the MSI Live Update utility... but still no luck... the only network driver it gets is the one for my reltek card :-(
Any suggestions???
I use Windows XP Professional SP2. How do I install the drivers for my onboard LAN???
Best regard.
Tor-Atle Kindsbekken

Quote from: osnavi on 05-November-05, 20:02:09
"...so my onboard Broadcom 4401/5788 controller thinks it is a 3COM controller instead of a broadcom controller..." Think it shouldn't be possible since basic data should be written in a kind of ROM. Now, if that could happen, it should be possible to reverse it the same way you did to overwrite that data.
I belive you are right... but I can't reverse it the same way I did when overwrite the data... because I'm not able to install the driver :( I cannot install the driver at all in Windows XP. In Windows ME it's possible to force the installation of the driver... but it does not work. It moves from unknown devices to network controllers... but it gets a yellow dot... and is not working. Every time I boot Windows ME I get a message reporting that something is wrong with the broadcom ethernet controller :(
I belive the only way I can reverse it is to replace my harddrive with another... with Windows XP and drivers for my card is already installed on the harddrive... the same way as I did when overwriting the rom file(s) with data from my Asus board... but I can't make such a harddrive when the drivers won't install on my card :(
I maybe think this also has happend to the onboard Audio controller... and maybe the chipsett also :( The audio controller works perfectley eith the MSI C-Media drivers... but when I run MSI live update... I get drivers for the C-Media device... but also drivers for "VIA AC97" audio controller can be downloaded from the MSI Live Update Utility... The "VIA AC97" is the audio controller on my Asus board... so I belive it has happened here also... and maybe also to the "VIA 4in1" chipset... but this is the same "VIA KT600" chipset as on my Asus board. When updating my Via 4in1 driver, I just get an option to update the inf file. But normaly on "Via 4in1" drivers on other boards I know, there shold be installed drivers for PCI, IDE and AGP. Is it the same way for you guys with this motherboard? Is it only the "Inf file" to update for you guys also?
What I think is most frustrating here is that things like this cab happen. This can happen to everybody. Many times I've switched harddrive from one computer to another... and I've never experienced anything like this before. This time I was not planing to boot the harddrive at all... just format it... but forgot to set the right boot order... so the harddrive booten... and that's all it takes to "destroy" my board. Shouldn't these ROM files be a littlebit more difficult to overwrite, you think? Why doesn't MSI writeprotect their ROM files or anything... to make them a littlebit more difficult to destroy...?
Well... I'm still interested in advices on how to "restore" my motherboard data to the original values... and remember... clear CMOS and update BIOS is not enough :(

Satellite C850-19Z - cannot install display driver

Hi
I have had to reinstall my Toshiba Satellite C850 - 19Z ----- PSCBWE - 02400NEN
with Windows 7 Home Premium 64 bit.
The laptop uses Intel(R) Celeron(R) CPU B830 @ 1.80GHz 1.80 GHz processor
Everything has installed fine apart from the display driver.
I downloaded the following file as my laptop is using an Intel Processor
Intel Display Driver
Version 8.15.10.2752
display-20130924153144.zip4
For model Satellite C850
I found the file using the following drop down options on the Toshia website
Satellite C850 PSCBWE Windows 7 64 Bit Display Driver United Kingdom English
When I try to install the file I get the following error message:
This computer does not meet the minimum requirements for installing the software.
I have checked the requirements in the readme file. The three requirements are:
1.
3rd generation Intel(R) Core(TM) processors
2nd generation Intel(R) Core(TM) i3 processor
2nd generation Intel(R) Core(TM) i5 processor
2nd generation Intel(R) Core(TM) i5 vPro(TM) processor
2nd generation Intel(R) Core(TM) i7 processor
2nd generation Intel(R) Core(TM) i7 vPro(TM) processor
I am not sure which generation my processor belongs to but i'm assuming it is one of the above since this is the driver for my specific laptop.
2. The software should be installed on systems with at
least 1 GB of system memory.
I have 4 GB of RAM and my system is showing 4 GB is installed.
3. There should be sufficient hard disk space in the <TEMP>
directory on the system in order to install this
software.
I have 270 GB of free space in my primary hard drive / partition which windows is installed into. The file defaults to extract in this hard drive / partition.
I cannot figure out what the problem is with this installation.
Please help!!!
Thanks
Message was edited by: Bob001_1

Hi
As you said, the notebook was equipped with the Intel Celeron processor B830
This CPU supports the Intel HD graphic chip as mentioned on the Intel ARK page:
http://ark.intel.com/de/products/71141
The driver can be downloaded also from Intel page:
https://downloadcenter.intel.com/
Here choose:
-Graphics drivers
-Laptop graphics drivers
-Intel Celeron Processors with Intel HD graphics
Here you can download an zip package.
Then you will be able to update or install the driver within the device manager.
You can use the Advanced installation which will help you to point to the unzipped driver folder

Cannot install camera raw 6.3

I downloaded camer raw 6.3 from the adobe downloads site but I cannot install it. There is no camera raw 6.3 installer.exe. There is an AdobePatchInstaller.exe but it returns an error code "update is not applicable" when I run it. Any suggestions.
Jim

I don't know what the origin of that message is, as I don't use Lightroom, but it could be just telling you that to get the best possible integrated raw file experience you need to have Photoshop CS5 to go along with the version of Lightroom you have.
I don't know what kind of camera you're using, but it could be that installing the Camera Raw 5.7 update for CS4 might get rid of the message:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4681
-Noel

Cannot install Camera Raw 5.4

I get messages telling me that I should download and install Camera Raw 5.4. But when I download it and try to install it, I get a message in a popup windown telling me there is an error and it will not install giving me the option of trying again, doing it later, or aborting. When I go to Photoshop CS4 my plugin shows Camera Raw twice. When I click on the first installance (help-plug-in), I have a window popup telling me that it is Camera Raw 5.3.0.15, when I click on the second instance of Camera Raw, I get an error message telling me that it already exists.
Is there a way of uninstalling Camera Raw plugin, and installing the new Camera Raw 5.4? Or, do I want to have both of them in which case, how do I install Camera Raw 5.4?

Search all the directories under your c:\Program Files\ for camera raw.8bi
(or camera*.8bi) and see how many you find.
If you only find one and it's in:
C:\Program Files\Common Files\Adobe\Plug-Ins\CS4\File Formats
then there aren't really multiple copies and I'm not sure what you tell you.
If you find more than one, then try renaming the one not in the directory
listed, above, to
Camera Raw.8bi.err or something then try the camera-raw 5.4 upgrade, again.

Cannot install BT driver

For last few days I was not able to use my Bluetooth and wireless connection. Then when I was trying to install Bluetooth driver on my Toshiba Satellite M645 - PSMPML-00UOO5 it shows the message "Could not turn Bluetooth power on. Please turn on wireless communication switch located on side of main unit." but i am not understanding this.
Where is the switch?

According posted part number you have an Asian notebook model and it is not known to me.
Anyway, I presume the principle how it works must be the same for all Toshiba models so for enabling WLAN or BT module you must use FN+F8 key combination.
Please check it out and post some feedback.

Pavilion g7 Cannot install video driver for HD Radeon HD 7670M

1. I couldn't install video driver after reinstalling windows on my computer, instead of showing HD Radeon HD 7670 it just shows HD Radeon HD 7600 Series and when you install driver from AMD.COM it installs all the software but the driver. Also 2. I could not use this video card for Adobe AE, even though the video card is in their list

Hi Elijah_Mochalov and welcome to the HP Support Forums!
I see that you are having a problem reinstalling the video card after reinstalling Windows on your HP Pavilion g7. I will try my best to help you resolve this issue. To better assist you, could you please tell me the full model number of your computer and the operating system that you have installed on it. Here are a couple of guides for How Do I Find My Model Number or Product Number? and Which Windows operating system am I running?
I suggest that you download the driver for your HD Radeon HD 7670 video card and save it to your desktop. Then go to Device Manager and uninstall what it there for your video driver and then reinstall the downloaded driver, then restart your computer.
I hope this information helps, please let me know.
Have a great day!
I worked on behalf of HP.

Cannot install Camera Raw 7.2 update

Hi there,
i used abobe download asstant to download and install elements 11. then used elements - help - updates to download and install raw 7.2. however i cannot open any of my rx100 raw .arw files.
camera raw is not listed in help - about plugin
im using windows xp sp3, and have two physical internal hard drives ( C drive for OS, f drive for data/program files)
i asked adobe to install elements into F:\Program Files\Adobe
i can see that elements auto installs some data to
C:\Documents and Settings\All Users\Application Data\Adobe
including what looks like the raw plugin post update
C:\Documents and Settings\All Users\Application Data\Adobe\CameraRaw
only thing i can think of is rule out two drive issue, uninstall and reintall all to c drive to see if fixes to help elements 'see' plugin
or is there any way to 'force' adobe to see plugin?
any assistance appreciated
many thanks
rob
p.s. experienced it chap, but new to elements and adobes photo software!
Message title was edited by: Brett N

juergen
you will see here
http://www.adobe.com/store/en_us/popup/software/elements11/trialfaq.html
thats confirms pse11 is a fully funtional software package and the trial version contains no limitations - uninstall/reinstall works as normal (i have currently done this three times)
pse11 remembers how far through the trial you are on the same pc
when you first download pse with download assistant it asks for a download directory and this directory subsequently contans all the program files necessary (1gb+) to reinstall pse11 should it be required.
Barabra - i had alread hit uninstall so continued...!
i tried installing to c drive only and same symptoms where pse11 works as normal but not picking up the plugin . but i think i may have found the issue when trying to copy the orig pse11 download/installation folder to another xp machine to rule out this one as the cause. when it got to data19.cab it hit an crc error, so i think my root problem is the orig download could well have some corrupt files.
so currently going back to drawing board on pc2 with XP for a fresh download/install to see how i get on (and this one only has one hard drvie anyway)
also possiby of interest after a little digging last night. within editor. Edit - Preferences - plugins it is possible to specificy to pse11 where to look for plugins. i don't think will help me right at this moment though.
many thanks,
Rob

Cannot install Camera Raw 6.6 in CS 5

I have tried to install the update for Camera Raw 6.6 but I keep getting an error message. It says "some updates failed to install" and then says "update is not applicable". It says to "Contact Customer Support for further assistance." I ran the Adobe Support Advisor and it has the following message "Inspection found an issue but cannot determine the cause or corrective action. Please contact Adobe Support for further assistance. http://www.adobe.com/support". I have classes to teach tomorrow evening and some of my students shoot NEF format.
I have tried and cannot open the files because I get a message "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information."
I have read through some of the forums which say there is a problem with Camera Raw 6.6 in regards to RAW and NEF files. I updated to Version 12.0.4 in CS 5 32 bit and have also ran the Camera Raw 6.1 with the same results. I also updated the Adobe DNG Converter 6.6, Adobe Air and Adobe Support Advisor.
This is very maddening and seems to be a big issue for many people.
Can someone direct me to the solution for this issue.

I'm sorry you have not had a response yet, and I am not going to be able to give a definitive answer either. I can't see if you have mentioned what platform you are using?
Recent ACR updates have installed outside of the auto update process for me, mainly because I see a heads up in places like tis forum of DPReview, but the updater still tries and fails to include ACR. When I check it is already installed. That does not sound to be the case for you as you say you have unsecessfully tried to open NEF files from recen Nikons.
Have you tried downloading ACR manually outside of the updater?
Windows
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5312
Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5311
I don't feel like I have fixed your problem, but if you at least tell us what platform you are using, the weekend is coming to a close and folk are getting back to work, so help will be on its way.
BTW I am in New Zealand and it is Monday evening, _and_ it is Waitangi Day, but we are more into lifestyle than earning a living here.

Cannot install scanner driver for Epson 1650 Perfection

This isn't making sense to me. I was running Snow Leopard on another drive and was using my Epson Perfection 1650 scanner just fine. I bought a 2TB drive and installed Snow Leopard and am booting from that now and my scanner isn't recognized. If I try to open the Epson Scan utility, it just quits before it fully opens. I downloaded the scanner driver from Epson's website again and when I try to install it, the installer quits before it is fully open.
I did a Repair Permissions but that didn't help.
I tried manually copying the Epson Scanner Module folder from my Library on the other drive to the Library on this new drive and that didn't help.
I found a webpage on Apple's site listing scanners that are compatible with Snow Leopard and mine is listed. It claims most drivers are installed with the system. If so, how come my scanner isn't working now? But it did work in Snow Leopard on my other drive. I can boot from the other drive and use the scanner now, but I want to be able to use it from this drive.

I have been able to use OmniPage X in Snow Leopard with only one problem. I think it is because I did not try to instal it. It came across with my auto transfer from earlier software/hard drives. It reads documents but does not scan because I haven't transferred over my old twain files. I understand that the OmniPage twain file may not work in Snow Leopard but there is a freeware twain driver which I haven't tried.
So if you are having problems installing OmniPage on your Intel Mac, try copying over the app, (OS9 style) from an older Mac which has an old OSX system on which OmniPage X successfully installed.
I use VueScan to scan pages from my scanner, save the multiple pages as a pdf, open OmniPage and get it to import the pdf file. Then I do steps 2, 3 and 4 manually (though you could do all steps automatically). The result is much better and incredibly accurate text - much better than in the olden days when I could scan directly into OmniPage. The only things occasionally misread are numbers, particularly fractions.
I am scanning two pages at a time and the VueScan OCR, though it otherwise does a quite accurate job, tends to blend the two pages together, so it is not useful for me. It would be far too slow to scan in each page separately.
It's a shame that Caere sold OmniPage to Scansoft. I remember getting regular messages about improved accuracy upgrades and I'd always buy them. Caere cared. Scansoft does not, even though OmniPage still is the best OCR software for the Mac.
If Scansoft is not interested in upgrading OmniPage for the Mac, maybe it should stop hogging it and sell it to someone who would be interested in looking after its users.

Cannot install TWAIN driver - run preflight failed

I am a Windoze refugee who is helping my father clean up his messy iMac.
He has a Brother DCP-165C printer which he cannot use to scan.
Mac OS X 10.5.8 is up to date, I have recently run the verify disk utility and fix file permissions (as part of my efforts to fix this problem).
I have seen and followed a number of posts in my attemps to fix it and can summarise my efforts as follows:
De-installed all Brother drivers as per their instructions for OS X 10.5.8 on their supprt website.
The Brother printer driver package installs fine so in repeated attempts I have used various postings to de-install them, they all follow the same theme, but this one appeared a bit more comprehensive https://discussions.apple.com/thread/1881546?start=0&tstart=0
I have created a new user (with admin privs) and tried using that to install since I read that files in the users home can interfere with an installation - no joy.
So I finally took the plunge and extracted the preflight script out of the package and ran it in terminal. It's a perl script which gives the following error:
Can't locate Foundation.pm in @INC (@INC contains: /Library/Perl/Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/Library/Perl .) at preflight line 12.
BEGIN failed--compilation aborted at preflight line 12.
Now that sounds pretty terminal, but, the secret I haven't let you in on is that I installed the TWAIN package fine last week. I don't know why (or am even certain if) it stopped working, but we had some problems with the printer.
So my conclusion is that I should be able to get this missing perl component, but perl is something I know nothing about.
thanks in anticipation

Solved!!!
Once again thank you BDAqua for keeping me pointed in the right direction.
After some serious research:
@INC array is set when perl is compiled, it is actually built into the perl binary when you run Configure before compiling..
So it cannot be changed without re-compilation. Likewise, it cannot be broken without re-compiling
/System/Library/Perl/Extras/5.8.8 is not actually in the @INC array, Apple use none of the accepted methods (or so I believe) of adding it, they have a file in /Library/perl/5.8.8 named AppendToPath which contains:
               /System/Library/Perl/Extras/5.8.8
                /Library/Perl/5.8.6
                /Library/Perl/5.8.1
The references to previous versions are there for backward compatibility.
It is also poosible to create a PrependToPath file. As you would expect PrependToPath adds directory(s) to the beginning of the search, and AppendToPath to the end.
You can list the contents of @INC with this command:
perl -e 'print join "\n",@INC'
All I did was run Pacifist to verify the directory /Library/perl/5.8.8 and it reported only 5 files found out of 50, so I just asked it to install the directory structure. That was it, fixed, the TWAIN drivers installed.
For background read:
http://www.perlmonks.org/?node_id=486084
http://www.perlmonks.org/?node_id=385469
A must-read is
https://developer.apple.com/library/mac/#documentation/Darwin/Reference/ManPages /man1/perlmacosx.1.html
which details how perl s configured on OS X.
which contains this important and amusing snippet:
"If all else fails and you want to really, REALLY, start from scratch and remove even your Apple Perl installation (which has become corrupted somehow), the following instructions should do it. Please think twice before following these instructions: they are much like
conducting brain surgery to yourself. Without anesthesia. We will not come to fix your system if you do this."

P965 Neo JMicron ?buggy? in PATA-mode and cannot install newest driver

I have a MSI P965 Neo and a PATA HDD (alone on the IDE-cable)
if I copy some big files over network (via onboard realtek) from 2 other computers in my network:
PATA:
a) files are ok (correct md5), without the JMicron-driver 1.06.01.00 from MSI website, but very slow speed and laggy mouse.
b) files are NOT ok, with JMicron-driver 1.06.01.00, speed is fast, mouse are ok.
if I use a PATA-2-SATA adapter from a friend and the HDD is
a) hooked on JMicron-SATA-Port, with JMicron-driver 1.06.01.00, files are ok.
b) hooked on intel-port, files are ok.
I did some tests with a dlink-NIC on msi mobo, but in PATA-mode on JMicron still errors.
so for the JMicron in PATA-mode there is a bug, in SATA-mode not.
I have hope with with the new driver from MSI site vesion 1.14.00.00 but this one won´t install - got a dialog with "updatedriverforplugandplaydevices: error".
any help ? coz I cannot use the PATA-2-SATA adapter from my friend forever and buying one isn´t a big deal but I paid already for not 100% bugfree msi p965 neo.
update:
filecopy from internal hdd to external usb-hdd, is not a problem, only over network. so JMicron in PATA-mode produces errors if realtek-onboard-chip is under load or an other NIC.
OS was WinXP SP2 32bit, but WinXP x64 has the same problem.
I tried also older realtek drivers but no success.
but Vista RC1 has no errors with filecopy over network with jmicron in pata-mode, with Vista´s default drivers for JMicron and realtek-nic

I got the same problem with "HANGING"... the whole system freezes (mouse and sound for example) when I access my DVD burner, e.g. wenn I insert a new DVD, and/or copy a file like VTS_04_1.VOB to my system (just for testing). I never experienced this behaviour in any PC system before... This isn't acceptable on a 2 gig, 6600 core 2 duo system.
I played World of Warcraft recently, and burned a video DVD from a hdd image file at the same time - which should be blindfoldly managed on a core 2 duo 6600.
on my old system (an amd, single core) the same action would have no effect on the game. But on my new MSI board system, there were major hangs to the game... Just when the system accessed the DVD burner.
More strange appears to me, that accessing the second DVD device, the DVD-R (just reading) doesn't cause any hangs to my system.
I never had any of this occurences in any PC before ... This must have something to do with the Jmicron IDE to SATA2 "bridge".
I got the JMB36X 1.14.01.exe and the latest BIOS
My system specifications read as follows:
1x 3R Systems DCase R202, silver be quiet
1x SilentMaxx 480Watts, 19dB extra silent
1x MSI P965 Neo-F Socket775, FSB800/1066 ATX PCI-E16x
2x CSX1024MB DDR2 DIMM, 800MHz, original Value
1x Core 2 Duo E6600 (2,4GHz 4MB), Box S775
1x GeForce 7900 GTX 512 MB Gigabyte, TV-Out/DVI Retail
2x SATA2 250GB Samsung SP2504C
1x LG GSA-H20L Black Lightscribe, Retail Nero+Kabel
1x Lite-ON DVD-ROM SHD-16H5S-05C, 16X
Hoping there will be a fix soon... I noticed this strange behaviour at once, when I installed Heroes of Might and Magic V (just after I bought my new system) and wondered, why the installation routine takes SOOOO long and consumes one core cpu completely....
Regards,
chingom

Satellite Pro M30 - cannot install sound driver

Hi
I have a Satellite Pro M30 which usaed to work fine but I can no longer install sound card drivers on it.
I THINK it has happened since we reinstalled windows XP Pro with SP2 but can not be certain.
It is trying to install the Sigmatel AVC97 drivers and comes up with the following error.
Invalid operating system parameter or this installer does not support this operating system
Any suggestions as there seems to be only one sound driver for the SPM30 family.

Nobody here have got a problems with sound driver installation just you
So is this not strange for you???
Either you did something wrong or its your windows XP issue.
Please note that the Toshiba driver page provides also the Installation Instructions
There you can find the right installation order!
Install your OS again and follow this instruction in this doc!

Cannot install camera driver

Similar Messages

Maybe you are looking for