CANNOT install Canon MF 4880 software with Windows 7

I am attempting to wirelessly connect my laptop to a Canon MF4880 at my office.  The printer, which is an older model, is already connected to the desktop here (Windows XP) and has no problems.  The software that came with the printer is not compatible with Windows 7 which I have on my laptop.  I have worked on this countless hours and tried everything I can think of.  
I thought I found the answer today when I downloaded the Windows 7 drivers from this site (which I have done before) but this time I was prompted to allow them on my Firewall.  Still no luck.  I got as far as downloading the updated drivers, but when I run the setup, the printer doesn't show up on the network so I can't get further than that.
Could there be an issue with the sharing settings on the desktop??  I don't know what else do do. 
Any suggestions would be greatly appreciated.
Thanks!

Thank you for your reply DrMarieDC.
Please follow the instructions below to try and add the printer by configuring the port settings:
1. Open the printer folder.
From the [Start] menu, select [Devices and Printers].
2. Right-click the icon for the machine and select [Printer properties] (or [Properties]), then select the MF4800 Series UFRIILT.
3. Click the [Ports] tab.
4. Click [Add Port].
5. Select [Canon MFNP Port] for [Available port types] and click [New Port].
6. Click [Auto Detect].
NOTE
When you cannot perform Auto Detect:
Enter the IP address or MAC address of the machine manually.
7. Select the detected printer and click [Next].
8. Click [Add].
9. Click [Finish].
10. Click [Close].
11. Click [Apply], and then print.
If the error persists, I recommend that you contact us at 1-800-OK-CANON (1-800-652-2666).  The real time feedback of a live technical support call would be very beneficial in this case.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • Cannot install HP Photosmart 2610 Driver with windows xp

    cannot install HP Photosmart 2610 Driver with windows xp. keep getting registry error messages part way through the instal.. any suggestions? Thanks

    Hello, 
    Please check if you have an ADMIN rights to log into your PC.
    Else, create an ADMIN user account and then run the installation ,
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Cannot install HP Officejet 5610 software for windows 8

    Hi there
    I am running Windows 8 (64-bit)
    I have downloaded the HP software for the Officejet 5610 All in One. When I try to run/install the software, however, it tells me that the file is corrupt.
     How do I get around this?
    Thanks,

    Hi there
    I can print - the drivers downloaded automatically when I plugged the printer in - but I need the HP Solution Centre Software - I do a lot of scanning and need it for that.
    I have still been unable to install the software. It took over a day to download/save the installation file (AIO_CDB_NonNet_Full_Win_WW_140_408), which is supposed to be 412 MB. Only 358 MB downloaded. When I run it, it says file corrupt. I am running windows 8 on a brand new, top of the range Dell How can I get this software to download? Thanks!

  • Failure to install canon digital camera software

    I'm unable to install the software from the disc provided and the update from the Canon site. I have run a disc repair and still unable to install. The camera downloads to another iMac and the software installed to a Dell. Also I tried installing an earlier version that works on second iMac but cannot get that to download to primary iMac (G4 10.4.8)
    Any ideas about what to do next?

    Hi bluebee,
    It is not your iMac. I just purchased an iMac G5 Intel and I also have a Canon Digital Elph (with the Canon software installed on my eMac G4) wondering the same thing. There are some aspects of the Canon software that I prefer over iPhoto.
    But before installing, I came across the following on Canon's homepage:
    "Canon is conducting compatibility tests for the current versions of Canon digital imaging software with the shipping versions of Mac OS X 10.4 [Tiger]. Results will be posted soon. For now, Canon is not claiming compatibility with Mac OS X 10.4"
    Hope this helps,
    Steve
    iMac G5 Intel Core 2 Duo, 2.16 GHz, 2 GB RAM   Mac OS X (10.4.9)   iBook G3 366 MHz (clamshell), 576 MB RAM, Mac OS X 10.3.9

  • Cannot install LR5 due to not having Windows 7.

    I purchased an update of LR5 and cannot load it because I do not have Windows 7. Is there anything I can do other than buying a new computer?

    From what I conclude, it is not an upgrade to 4.4, but a stand alone program that all of a sudden needs windows 7, which I do not have. After downloading windows 7 test program to see if I can have windows 7 and it's compatibility, it turns out my machine is not compatible or many issues with warning symbols. I am in the process of purchasing a new laptop with 12GB ram and 1TB hard drive, windows 8, with NVIDIA G Force video card just so I can play with LR5. All I am saying is, if it's an upgrade, fine, don't change the operating system requirements. Make it a stand alone program. Then, previous owners of LRxx have the option of buying LR5 at a reduced rate rather than paying full price. Then everyone is aware of the incompatibilities.
    Thx for listening to my rant and I appreciate Adobe to offer to repurchase the software. I just hope I can re-load LR4.4 on this new laptop and accept LR5 without having to pay again for LR4.4.
    Rémi Villars Jr.
    [email protected]
    Date: Fri, 14 Jun 2013 16:50:13 -0700
    From: [email protected]
    To: [email protected]
    Subject: Cannot install LR5 due to not having Windows 7.
        Re: Cannot install LR5 due to not having Windows 7.
        created by Ned Murphy in Downloading, Installing, Setting Up - View the full discussion
    You're welcome Rémi,
    Unfortunately, purchasing software, much like anything else you buy online, is pretty much on the buyer to beware.  The vendor cannot know the intended use, whether the software is being purchased for the machine at hand, or another machine, or as a gift for someone else.  They provide a list of system requirements in the product pages but don't intrude into your machine to determine whether or not it is a suitable match.
    It looks like Jeff might have provided a reasonable recourse for you.  Hopefully you won't run into a problem there.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5410551#5410551
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5410551#5410551
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5410551#5410551. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I cannot install iTunes.  I get a Windows Error 126 and missing msvcr80.dll.  I've tried uninstalling and re-installing based on all the suggestions, but still have an issue

    I cannot install iTunes.  I get a Windows Error 126 and missing msvcr80.dll.  I've tried uninstalling and re-installing based on all the suggestions, but still have an issue.  I've removed all the services, tried moving the dll files as suggested, but I still have no success.  Spent all day on this issue.  I am running windows 7.

    Sorry to hear this isn't going smoothly for you. Try  Troubleshooting issues with iTunes for Windows updates. You may have seen some of the suggestions here before but is has taken some users more than one attempt.
    tt2

  • Premiere Elements 12 will not run after installing on my HP laptop with Windows 7.

    Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
    I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

    Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
    I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

  • Install disk doesn't work with Windows Vista

    I just bought a new HP Color LaserJet Pro MFP M277dw and the install disk isn't compatible with Windows Vista.  Apparently there's no ful feature option for Windows Vista on an HP laptop.  After several hours of work I downloaded several drivers and got the printer to print, but the scan function doesn't work that well without the HP software which hasn't been created for Windows Vista.

    I am having a very similar problem but do not have an answer either.  I am running an X61 Type 7676A12 with a Lenovo ACP50 port replicator FRU part number 40Y8160.  I am running Windows XP Pro.  The port replicator has never been very great and would not restore the external monitor picture properly when the laptop had been in sleep mode however it was serviceable if not optimal.  After downloading and installing the October MS security updates the machine would get a BSOD when the port replicator was plugged in.  Remove the replicator and reboot and it worked ok.  Plug it in again and BSOD.  I tried upgrading the drivers from 5.1.4a to 7.1.1.03Aug07 and then to 7.1.2.  No go.  Emailing Targus with the problem got no response.  The port replicator is now relegated to my junk heap of useless rubbish.

  • Unable to install itunes for new computer with windows 8

    unable to install itunes for new computer with windows 8
    states this app unable to run on this PC

    Hello jgrn76,
    It sounds like you are getting an error stating that the iTunes installer cannot be run on your computer. I would try downloading the 64 bit version of iTunes from here:
    iTunes 11.1.3 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    If issues persist when trying to install it, I would try running through the steps in the article named:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Otherwise, would you mind elaborating a bit on what the error message says, word for word?
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Issue while Installing Oracle Data Access Software for Windows

    All,
    Iam getting the following error while installing Oracle Data Access Software for windows. Iam installing in WindowsXP, with Oracle 9i release 9.2.0.7.0 DB and client in the same Box.
    It shows
    The Specified Key key was not found while trying to GetValue
    * Stop installation of all Products
    * Stop installtion of this componenent only.
    Kindly let me know why this error is showing up.
    Regards
    Ramesh

    Most probably you have hit this issue:
    "If you have more than one Oracle Home installed on the same machine (e.g. Oracle8i client and Oracle9i Release 2 client), use the Oracle Home Selector to run your applications with Oracle9i Release 2 client. "
    As documented on the Oracle Data Access Software for Windows. Release 9.2.0.4.0
    ~ Madrid.

  • Can't get adobe reader to install on my new laptop with windows 8

    I can't get adobe reader to install onto my new laptop with windows 8. Basically what happens is that I start the download from the adobe screen by clicking the yellow download button, then I click run (I've also tried save and run), then I allow the program to make changes to my hard drive, and then finally a blank grey box appears in the in the middle of the screen, titled "adobe reader installer". After this box appears nothing else happens. I've let it sit for at least 30 minutes and still nothing. I've also disabled my pop up blocker, and set the security settings to default as suggested in other posts. Unfortunately this is the only pdf program that works for the site we have to use to write contracts, so I need to get this figured out asap. Thanks in advance for any help and advice.

    Try installing from http://get.adobe.com/reader/enterprise

  • Macbook Pro (late) 2008 won't recognize HD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???D a

    Macbook Pro (late) 2008 won't recognize HDD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???
    And HDD is APPLE certified ( 250 GB )

    Hello JashaCOLD,
    Thank you for the details of the issue you are experiencing with your external hard drive.  I found an article with steps you can take when an external device is not being recognized.
    I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • ITunes will not install correctly on my PC with Windows 8.  Any hints?

    iTunes will not install correctly on my PC with Windows 8.  Any hints?
    The error message reads:
    iTunes.exe - Entry Point Not Found
    The procedure entry point ADiAdlD_AcquireMatchSlotIfNecessary could not be located in ghe dynamic link library C:\Program Filess(x86)\iTunes\iTunes.dll.

    See this User Tip by turingtest2
    Troubleshooting issues with iTunes for Windows updates

  • I did not install icloud when setup my ipad and now I cannot install icloud on ipad 3 with ios 8.1.

    I did not install icloud when setup my ipad and now I cannot install icloud on ipad 3 with ios 8.1.  Everything in Settings is complete and correct.  I can log in from my PC with no trouble.  If I go to icloud.com on Safari on the ipad, it takes me to a instruction page which only says to complete icloud in Settings.

    That's happening because icloud.com is not designed to be viewed from the mobile version of Safari on your iPad, only from your computer browser.*   You can still access it on your iPad if you're running iOS 8 by going to icloud.com, then tapping on the address bar where the url is displayed, tap the center of the screen and drag down, then tap "Request Desktop Site" under the address bar at the top.  This will load the full desktop version of icloud.com.  You'll find, however, that not all of the the features will respond to the touch screen.
    * That's because all of your iCloud data is already on your iPad and can be accessed from within the apps that you are syncing with iCloud (contacts, calendars, notes, reminders, etc.)  If you need to use Find My iPhone (iPad), you can download the free Find My iPhone app to do so.

  • Trying to install CS5 on new laptop with Windows 8 pro. Keeps telling me to close Google Chrome when it's already closed.

    trying to install CS5 on new laptop with Windows 8 pro. Keeps telling me to close Google Chrome when it's already closed.

    Terminate the relevant processes in task manager, including the Google updater service.
    Mylenium

Maybe you are looking for

  • Office 2011 won't open on my migrated Macbook pro.  Running Mavericks.

    Process:         Microsoft Word [417] Path:            /Applications/Microsoft Office 2011/Microsoft Word.app/Contents/MacOS/Microsoft Word Identifier:      com.microsoft.Word Version:         14.3.8 (14.3.8) Build Info:      Unknown-130913~0 Code Ty

  • A way of making window look transparent

    I'm using the following method to make a window look transparent: whenever a frame is moved, it makes a screenshot of the underliying area and displays it as its background but, unfortunately, this doen't work in this example ???? public class MyFram

  • Time ticket confirmation in Process Order

    Hi All, I am working on 6.0 While confirming a process order with COR6N, I have set error in case operation sequence not adhered in OPK4. but while confirming if i do not adhere the sequence still it is not giving error. What may be the problem ?

  • Left outer join (business model and mapping layer)

    hi, experts! !http://img693.imageshack.us/img693/9642/joinp.png! if there are a dimension table and a fact table, I wanna have a left join from dimension to fact (select * from dimension a left outer join fact b on a.key = b.key;) is the selection fo

  • Runtime error Elements 9 Editor

    When I open my Adobe Photoshop Elements 9 Editor I receive the following message: Microsoft Visual C++ Runtime error This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support. Error Signatu