Cannot install chez scheme and swl

I try to install chez scheme and its GUI toolkit swl but failed because the pkgbuild information is too old ,the official swl is up to date to version 1.3 but which in pkgbuild is 1.0, so I modified it and recalculate the md5 to for modifying the pkgbuild,but I still failed and it only shows:
tclsh tclversion.tcl
echo "(define swl:Scheme \"/usr/bin/petite\")\
(define prefix \"lib\")\
(set! swl:version \"1.3\")\
(optimize-level 2)\
(quote (compile-profile #f))\
(generate-inspector-information #f)" > config.scheme
/usr/bin/petite configure.ss
Petite Chez Scheme Version 8.4
Copyright (c) 1985-2011 Cadence Research Systems
Don't know how to build for a6le, edit configure.ss.
no libraries found; cannot rebuild with Petite Chez Scheme
make: *** [all] Error 1
I don't know which library it needs but not found it,Could anybody do me a favor?

Similar Messages

When I try to install Time Machine update I get this message: You cannot install Time Machine and AirPort Updates on this volume. This update requires Mac OS X 10.5.2 or newer. I have OS X 10.5.8.

When I try to install Time Machine update I get this message: “You cannot install Time Machine and AirPort Updates on this volume. This update requires Mac OS X 10.5.2 or newer.” I have OS X 10.5.8.

It's bundled with 10.5.3 and newer and can't be installed separately on those OSes.
(59310)

I updated my mac 10.8 to mavericks but after installation the app store ask for the same software update again..i have a slow connection..i cannot install it again and again..what should i do?

I updated my mac 10.8 to mavericks but after installation the app store ask for the same software update again..i have a slow connection..i cannot install it again and again..what should i do?

In case you are not aware, Mavericks requires a high speed broadband connection.
In the event you need to restore or repair the starutp disk, OS X Recovery also requires a broadband connection as noted here > About OS X Recovery
You can check your download speed here > Speedtest.net
15Mbps or less, you may not be able to install Mavericks or use OS X Recovery.

My notebook is GTX970M, cannot install after effect and preimer cs6

Hello guys,
I have some problem with adobe. My notebook have been updated to use GTX970M display card. But however I cannot install after effect and preimer CS6. Is it the application cannot support it or else?
Please help me to solve this problem.
Appreciate for your helping.

Unistall any ACR Betas on your system you may have used. Also simply run the Creative Suite Cleaner Tool and reinstall everything Adobe.
Mylenium

Cannot install Adobe AIR and CS6 suite

Hi folks,
Lets start with: i am the build in local admin account! i did run as admin! and as far as i know i got rights on everything.
Windows 7 SP1 64bit.
I did try selective boot through msconfig, and i did try it also in safe modes in the most minimal state.
Creating a shortcut with the "-uninstall" string obviously not work, because there is no more installation of Adobe air or CS6 products installed on my machine.
This is what the Adobe AIR installer log tells me,
[2013-07-16:14:03:48] Runtime Installer begin with version 3.7.0.2090 on Windows 7 x86
[2013-07-16:14:03:48] Commandline is:
[2013-07-16:14:03:48] No installed runtime detected
[2013-07-16:14:03:57] Relaunching with elevation
[2013-07-16:14:03:57] Launching subprocess with commandline c:\users\admini~1\appdata\local\temp\air28d5.tmp\adobe air installer.exe -ei
[2013-07-16:14:03:57] Runtime Installer begin with version 3.7.0.2090 on Windows 7 x86
[2013-07-16:14:03:57] Commandline is: -stdio \\.\pipe\AIR_4580_0 -ei
[2013-07-16:14:03:57] No installed runtime detected
[2013-07-16:14:03:57] Starting silent runtime install. Installing runtime version 3.7.0.2090
[2013-07-16:14:03:57] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception TypeError: Error #1009" errorID=1009]
[2013-07-16:14:03:57] Runtime Installer end with exit code 7
[2013-07-16:14:03:59] Runtime Installer end with exit code 7
Runtime Installer end with exit code 7 Also shows up when trying to install any CS6 Products.
I googled my cute little hiney off, for almost 2 full days now.. spent alot of time in the Win7 register and in deep hidden windows folders.
As far as i know i completly removed Adobe Air and CS6 products.
Also tried the adobe creative cloud cleaner tool everyone is talking about, but it not even start on my machine?!
Why the hell! i cannot install Adobe AIR or CS6 Products?
If you need more information, i am happy to give it to you.
PS
Adobe flash, shockwave and Reader work perfect?!!?!?!?!
I leave problems reports about Adobe CS6 products out of this discussion for now, because i have a feeling that the problem is connected with eachother.

Hi,
I found requirements for Flash and Air on Android from following Sites:
http://www.adobe.com/products/air/systemreqs/#mobile
Android devices
VGA: Dedicated Cortex A8 (ARMv7) 550MHz App Processor with Neon for A8 only; Hardware Vector FPU
WVGA: Dedicated Cortex A8 (ARMv7) 800MHz App Processor; Hardware Vector FPU
Google Android™ 2.2 or later
256MB of RAM
http://www.adobe.com/products/flashplayer/systemreqs/
VGA
WVGA
WSVGA (1024x600)
WXGA (1280x800)
Hardware requirements
Dedicated Cortex A8 (ARMv7) 550MHz App Processor with Neon for A8 only
Hardware Vector FPU
Dedicated Cortex A8 (ARMv7) 800MHz App Processor
Hardware Vector FPU
Dedicated Cortex A8 1000Mhz App Processor
Hardware Vector FPU
Dual-Core Cortex A8 1000Mhz App Processor
Hardware Vector FPU
Operating system
Android™ 2.2*
If I am getting it correctly, both requires same ARM version, and Hardware Vector FPU.
But I have found many devices, where Adobe Flash is installed and running. (If market does not show Adobe Flash, device manufacturer provides flash apk which works)
But can not install Adobe Air. Market does not show Adobe Air.
Is there any way to sort this out?
I get feeling that as Flash is more popular software, people have got patched version for the same. But for Air, it does not exist.
Thanks

New ipod - "cannot install this hardware" and "access is denied"

Over the weekend I got a new iPod Video. Previously I had an iPod Photo. This new one plugged in just fine on my two computers at home but will not install to my work computer.
It will work as I can play and transfer files through iTunes, but everytime I plug it in I get USB errors:
"Windows cannot install this hardware - access is denied"
In the Device Manager it gives me a "Code 28"
Like I said, it does seem to work, I just want to make sure this isn't going to screw anything up when I plug in each day and get these errors.

iPods use the standard Windows USB mass storage drivers. it is possible for those to go walkabout on a PC. if that is what has happened to you, the techniques from this MarkJones post may be of some assistance:
MarkJones: Re: Windows XP (SP2) Laptop only finds generic "New USB 2.0 Device"

Cannot install QuickTime 7 and i tunes

I have read suggestions about logging out users, restarting, and making sure my firewall is ok. Still get registry error and missing key messages. Now I cannot access itunes because it needs QT and I cannot install it! Frustrated!!!

First, before you proceed you should have a valid backup of any tracks you've purchased from the iTunes Store or that would otherwise be difficult to replace, just in case something goes more seriously wrong with your system.
As to the problem, the steps on this Apple KnowledgeBase article may help:
Trouble installing iTunes or QuickTime software in Windows
If you continue to have problems with the 1905 error blocking uninstallation, I ran across this suggestion on another web site and it might help you (no guarantees since I haven't tried it myself):
Click the Start" button
Select the Run command
Type the following:
regsvr32 /u QtoControl.dll
You should see a small dialog box confirming that it succeeded.
Then follow the instructions at the above web page to completely uninstall iTunes and QuickTime. Then see if you can reinstall iTunes and get it to work.
Hope this helps.

PA3541U-2PRP dynadock vga cannot install with win7 and latest drivers

Hello, I need help installing this on a Tecra A8 S8513. I have Win7 professaional installed and I've tried to install the dynadock with all variations of drivers, letting Windows discover and install (bad 5.3 core was found) and using 7.03 and 7.1, 6.3 and 6.2. None of them stop the infinite loop of the graphics setting for the first time and none of them solve the generic usb hub that it should have. It's like the install is connecting and disconnecting in an infinite loop. I've also tried (after dynadock failures) plugging in a usb mouse and the vga/rgb monitor directly to the three usb hubs in the rear and they don't even come up as new hardware. I've searched here and all over the internet for solutions. None have helped.

The first code block contains my Xorg.0.log however I just tryed modprove nvidia and recieved FATAL: Module nvidia not found. which I discovered was solved by someone here https://bbs.archlinux.org/viewtopic.php?pid=961852 however when I tryed to do a pacman -S nvidia nvidia-utils I get a unresolved confilict with nvidia-304xx-utils which after trying to remove with pacman -Rs shows dependencies with cario, Im not sure how far back I should start removing things to solve this conflict or how to go abouts solving it
+++++++++
Update: Solved
+++++++++
I did some more looking and found I could force the uninstall of nvidia-304xx-lts with pacman -Rdds nvidia-304xx-lts and after revisiting the Nvidia page on the wiki for the dozenth time I started thinking maybe I needed nvidia-304xx oposed to the lts release as google as kindly pointed out lts is long term support and maybe my kernel was not lts and thus conflicting. This turned out to be the case, after removing the ofending lts version of the driver, replacing with the correct nvidia-304xx , another nvidia-xconfig and reboot followed by modprobe nvida and startxfce4 my wounderfull xfce is now running as I type this messsage in firefox. Thank you for you help, as you asking about the modprobe output caused the chain of events leading to the success.
Last edited by meschael (2014-09-18 04:15:30)

Restart install deleting schemas and not oracle

If I restart my install, and I want to delete the content in oracle (i.e. I want to remove the PCD schema), what is the command string to delete schemas in oracle. I do not want to delete oracle instance just the schemas taht were created during the install. The SAP EP manual refrences the SAP oracle EP manual on how to delete schemas but when you go to the EP Oracle manual there is not section explaining how to delete schemas.
Thanks
John Ryan

You can use drop user "username" cascade;
From SQLPLUS connect as system or sys.
username is schema name.
HTH
Venkat

Cannot install adobe air and I've tried most everything

Here are my install logs:=Using Windows 7 64 bit.
Tried most everything. At a loss.

I'm a bit confused, is the installer completing? What is not restarting? The browser or installer? If the installer is not completing because it says that Internet Explorer is still running, then you might have another application that is causing IE to continue to be loaded. Can you check to see if you have Skype, and if so please exit it.
Thanks,
Chris

Cannot install Adobe Photoshop and Premiere Elements 10

I am trying to load a new purchase of Adobe Photoshop Elements 10 and Adobe Premiere elements 10 on a new computer operating with Windows 7 32 bit operating system. The computer does not recognize the Instalation Disk and trouble shooting Microsoft says Disk burned with unknown Format. The same disk will read on an old Windows XP computer. This is a first time trying to load software. Any help with this problem???

If you are having a problem getting the disc to work, you can download the trial versions of the software from the page linked below and then use your current serial number to activate them.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
Photoshop/Premiere Elements 10:
http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l

Cannot install Apple iPod and iTune downloads (invalid digital signature)

Every time I try to install something from apple.com it won't let me. It brings up a message box that says something like "Invalid digital signatue" and it won't even give me a choice as to whether or not to download it. Has anyone else experienced this? If so, how did you fix it?

I try different browsers and they all have certificate notice alert.
New IE on win8 by default not allow to enter secure page with expire certificates.
I hope that cisco will make new firmeware with functionality to add costume certificate pfx for example.
Cisco support lower encryption type. Every new windows encrase cryptograpgi that IE support by default. Look IE about to see type 64 or 128 or 256…
On xp will work good, but we are now in era of win 8 with IE that support by default 128 or 256 depending home or server version.

Cannot install jam packs and cannot make disc image..what to do?

first installation of Logic Studio didn't work and reinstall even worse - can't get past jam pack 1 - even tried a disc image but got error input output.
Yet the disc was verified.
Would it help to reinstall OSX again the install?
Jeez!

Hi,
See this Link for Poland...
Poland
00800 4411875 (universal free phone)
www.apple.com/pl/support/
Contacting Apple World Wide for Support and Service
http://support.apple.com/kb/HE57

Cannot install creative cloud and ps cc on my mac

maybe i do not delete all file i installed before

run the cleaner, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
then retry installing.

I have downloaded browserprotect OK but cannot install browserprotect premium and would like to have a solution please.

It seems to work in part but then an error comes up saying navigation to the page has been cancelled, the page it refers to is microsoft silverlight

What OS are you running there?
Feel free to contact us at [email protected]
--sheldon
[http://www.browserprotect.org http://www.browserprotect.org]

Cannot install chez scheme and swl

Similar Messages

Maybe you are looking for