Cannot install clean Windows 7 64-bit to GPT partition

ASUS Maximus VII Formula
HGST 4TB Deskstar NAS, SATA 3 (6 Gb/s), 7200 RPM, 64 MB
Microsoft Volume Licensing Service Center (VLSC)
Windows 7 Pro 64-bit SP1
SW_DVD5_Win_Pro_7w_SP1_64BIT_English_-2_MLF_X17-59279.ISO
Procedure
On a Windows 7 Pro 32-bit BIOS laptop, I used Disk Management snapin to initialize the virgin 4TB disc to GPT. In Properties, it said it was a GPT disc. I then created a 1.0 TB partition with Quick Format unchecked (equivalent to DISKPART > clean)
so it would check for bad sectors.
I placed the 4TB disc into the ASUS Maximus VII Formula computer.
I made sure the UEFI BIOS was set to only use UEFI mode.
I booted into the Window 7 Pro 64-bit SP1 dvd.
During boot, ASUS screen said it was in UEFI mode.
Windows installer loaded properly.
On the Windows screen for selecting which partition to install the OS to, I selected the 1.0 TB partition. The following error occurred:
"Windows cannot be installed to this disk. The selected disk is of the GPT partition style."
Since the ASUS boot screen said I was in UEFI mode, why does it not let me install Windows to my 1 TB GPT partition?
I then deleted the 1.0 TB partition.
The partition was deleted leaving unallocated space.
I used NEW link to create a partition.
NEW did not work, it just left the unallocated space and did not create a partition.
Since the ASUS boot screen said I was in UEFI mode, why does it not create a GPT partition?
From the ASUS driver downloads page, I also tried loading the
"Intel_RAID_Win7-8-8-1_V13101058" 64-bit drivers during the installation process with no success.
Thanks in advance.

Hi,
How about your problem now? Based on my knowledge, Windows 7 X64 system is support GPT disk, but Windows 7 X32 system not. According to your description, your disk should be already GPT, this problem probably caused by Windows installation disk problem or
motherboard UEFI boot settings mistake.
Therefore, please check these two points for test. If problem persists, in my opinion, it would be better to contact ASUS suppoort for further assistance with this problem.
Roger Lu
TechNet Community Support

Similar Messages

Cannot install on Windows 7 64-bit

Trying to install iTunes onto my computer and having some problems. It was previously installed on my external HD, which recently was broken. Removed all traces of iTunes and Apple software etc. from my PC and tried a fresh install. Also used the Windows Installer cleanup to make sure all items were gone. restarted my PC.
Downloaded 64-bit version of the installer with no trouble and during installation I get the following problems...
Could not open key:
UNKNOWN\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8\b25099274a207264182f8181add5 55d0. Verify that you have sufficient access to that key, or contact your support personnel.
Installer rolls back and tries again.
Could not open key:
UNKNOWN\Compnents\44BDC17A0EF6F334694F8CB5B64E8A0D\CB06793473776834B9D19AA0E3A82 2AE. Verify that you have sufficient access to that key, or contact your support personnel.
Installer rolls back then tries again and apparently completes succesfully, but after install the when trying to open iTunes the following errors occur:
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error127)
I can not figure out what the problem is. No other problems going on with any programs, iTunes! Any ideas?

Could not open key:
UNKNOWN\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8\b25099274a207264182f8181add5 55d0. Verify that you have sufficient access to that key, or contact your support personnel
These ones are tricky. But the following instructions are worth a try.
First do a complete uninstall of iTunes and related components (but don't reinstall just yet), as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
a. Launch regedit (Start >> Search Programs and Files >> type Regedit and open the regedit that comes up.)
b. Access the following Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData \S-1-5-18\Components
c. Perform the following actions
i. Right Click on Components Folder
ii. Select Permissions
iii. Select Full Control and Read Permissions options
iv. Select Advanced Button
v. Select Owner Tab
vi. Select to Change Owner to the Administrators
vii. Check the option “Replace owner on subcontainers and objects”
viii. Select OK when prompted that it may not change all.
ix. Select Apply
x. Select Apply again
xi. Exit the Registry Editor
Now try reinstalling iTunes again. Does it go in properly this time?
Message was edited by: b noir

[XI 3.1] Issues during "Clean" install on Windows Server (64-bit) OS

Started setting-up a SANDBOX yesterday of BOE-XI (Release 3.1) on a "Clean" Windows Server (64-bit) OS.
I hit a couple of issues that I think may be related to the DEFAULT "Program Files" location on the OS being...
C:\Program Files (x86)\
...rather than...
C:\Program Files\
I chose to install the MySQL database and the IIS and Tomcat DEFAULTs for the CMC and InfoView.
BOE-XI (Release 3.1) said that it ran OK, but we had two issues that we are now cleaning-up...
1.) SIA did not install / appear in CCM. Had to manually create a new one.
2.) Tomcat InfoView and CMC were OK, but the .NET (IIS) InfoView throws a "The page cannot be found" error when trying to connect to...
http://<servername>/InfoViewApp/logon.aspx
Anyone seen this issue before - or have a link to a "Best Practices" document for installing on BOE-XI (Release 3.1) on the Windows Server (64-bit) OS...?
Thanks in Advance!

Hi,
I am also experiencing this issue with Crystal Reports Server XI installed on 64-Bit Windows Server 2003 Enterprise Edition.
I am also getting the following error when trying to view reports
The Page Server you are trying to connect to is not accessible. Please contact your system administrator.
Unable to retrieve Object.
The Page Server you are trying to connect to is not accessible. Please contact your system administrator.
Does anyone know how to resolve this?
Brian

CS3 will not install on Windows 7, 64-bit. No error message. Just stops installing.

CS3 will not install on Windows 7, 64-bit. No error message. Just stops installing. This is a brand new machine. This is one of the first things I'm installing on it. I'm running Windows 7 Home Premium 64-bit. The disks are fine. I have the programs installed on my two XP machines. When I run the disk, I get the window pop up that says "Initializing Installation for Adobe Creative Suite 3". Then the disk stops spinning and nothing else happens. No error message. Nothing else happens. I'm baffled. I have searched several discussion boards and cannot find anybody that has had a similar install issue like this.

Old_Timer I would recommend reviewing your install logs to determine the exact error message. You can find details on how to locate and interpret the logs at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.

I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. Tried to follow some suggestions found here but nothing is working. Any new suggestions?

I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. I've followed several threads I've read here but nothing is working.

For such situation, I'd suggest the following:
1. Remove current installed office with the fix-it tool in
KB2739501, and follow the "Remove Office manually" section to make sure there are no remaining files
2. Either download a trial version of Office 2013 from
http://office.microsoft.com/, or from
http://technet.microsoft.com/en-us/evalcenter/jj937170
3. Reboot your computer in clean boot mode, and run setup again
Max Meng
TechNet Community Support

I have downloaded Indesign CC2014 and installed 3-4 times but it doesn't run. I have installed on Windows 7 64 bit , HP laptop i7

I have downloaded Indesign CC2014 and installed 3-4 times but it doesn't run /work. I have installed on Windows 7 64 bit , HP laptop i7.

sign out and then sign back in to your cc desktop app.
then install cc 2014.

HT5639 After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do? i have using bootcamp 5

After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do? i have using bootcamp 5

if it's restarting directly into an error, you can try troubleshooting (might be painful) or re-install windows with boot camp

Why downloadhelper not installed in windows 7 64 bit?

why downloadhelper not installed in windows 7 64 bit?
== After install when try to run or open

Hi.
You should ask the extension's author for support.

Hello I have an I mac with Yosemite operating system. I installed a windows seven 64 bit on it. also i have a parallels desk top with version 10. if i run my windows without parallels my windows and my office is activated ,but if i run my parallel

Hello
I have an I mac with Yosemite operating system.
I installed a windows seven 64 bit on it.
also i have a parallels desk top with version 10.
if i run my windows without parallels my windows and my office is activated ,but if i run my parallels then my windows and my office can not be activated .
My problem is activating my windows and office through parallels desktop .
i had installed windows an parallel desktop several times ,also i installed several times parallel tools with menu bar in parallels desk top and when i am installing parallels desktop tools in any way i can see the (CTRL+ALT )
all of my application in windows works properly through parallels desktop except
activation of office and windows .
I do not no any solution for my problem , i need for helps .thanks

It is not W10, it is the Technical Preview version of W10.
Search on the Windows forums (fora for the latinist) for activation in the TP W10.

Help. I Can't Get Flash Player Installed on Windows 7 32 bit. The subinacl permissions need to be corrected. How Do I Do This?

Help. I Can't Get Flash Player Installed on Windows 7 32 bit. The subinacl permissions need to be corrected. How Do I Do This? The error message says I do not have sufficient permissions to install flash player. I have full administrative permissions.

Hi Paul,
Instructions (including video) for resetting permissions using SubInACL are available here How do I fix Windows permission problems with Flash Player?.
Maria

HT5628 Trying to Install Windows 8.1 on my late 2013 21.5" iMac. After I Format the Bootcamp partition, Windows Setup tells me "Windows can't be installed to this disk because it is GPT partitioned." Huh?

Trying to Install Windows 8.1 on my late 2013 21.5" iMac. After I Format the Bootcamp partition, Windows Setup tells me "Windows can't be installed to this disk because it is GPT partitioned." Huh?

You must use the Windows formatter to format your Windows partition NTFS. Please be sure you select the Windows partition otherwise you might end up formatting your OS X partition NTFS.

I am using Windows 7 64-bit on a partitioned hard drive on a MacAir. The trackpad will only work with a click. How do I get the full function of tap and scroll?

I am using Windows 7, 64-bit on a partitioned hard drive on a 2012 MacAir. The trackpad only works with clicking. How do I get the full function of tap and scroll? (I have this on a 2011 Mac Pro with 32 bit Windows 7 and it works properly.)

Windows Control Panel>Boot Camp Control Panel>Trackpad.

I cannot install Cisco VPN Client 64-bit in windows 8

Hi
I bought new laptop which is preinstalled with widows 8 EM OS.. But for my usage i need to install cisco vpn client (64-bit version) software in my windows 8 EM OS.. which i cannot proceed actually because of the following error :
Error 28000 : Before installing the cisco systems vpn client 5.0.7.0290, you must uninstall the previous version of cisco systems vpn client 5.0.7.0290, using the Add/Remove program files option in the control panel, then restart your system
Following the above popup again a popup prompts displaying :
I have tried to uninstall the program from control panel but i could not find vpn client installed in my system at all... Please give me suggestion how to uninstall and install the new one..
Could you please advise how i can resolve the above issue and setup Cisco vpn client in my windows 8 OS? your reply is more worthy to carry on my work...

Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application. If you have a question about another technology (such as Windows), you can ask in another forum. If you're unsure which forum, a Bing search often works the fastest or ask
here: http://social.microsoft.com/Forums/en-US/whatforum/threads
However, I'd ask in the
Windows 8 forum on Microsoft Community.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to install clean win 7 32 bit in touchsmart 300

Hello, i buyed touchsmart 300 for work in add multitouch feature to my software MonoTouchLive
I own windows 7 ultimate 100% legally and i do clean instalation, i not really interested in all tools and softare provided by HP, really good pkg, but i really like clean install.
Im very suprised when after try installl widnows 7 ultima, system freeze with BSOD screen due some comflict and installation die.
Its not possible install win7 32 bit on touchsmart 300 due some conflict, i researcha little and discover way to install windows 7 without trouble:
Step 1, With the Windows 7 DVD in your DVD drive press any key when promped @ 'Press any key to boot from CD / DVD...', as soon as the message is gone, quickly press F8 to show the boot options list. Select Safe Mode and install 7. It will allow the initial stages & file copying.
Step 2, When 7 restarts for the first time, press F8 and select 'safe mode'. A dialog box will appear stating that windows cannot continue in safe mode 'ok' to restart.
WARNING don press ok !!!
read step 3
Step 3, press SHIFT+F10 to open the command prompt and direct youself to x:\windows\system32
Code:
cd\windows
cd system32
then type CompMgmtLauncher (it takes a few seconds to load) you can then access device manager from this console.
Step 4, Select DEVICE MANAGER , and disable all yellow devices is the offending hardware & choose to disable it. JUST LEAVE ENABLE NETWORK ADAPTERS !
Close command window and click ok on the dialog box. Windows will use a standard driver (with less funtionality) when it restarts.
Once installation has finished enabel windows update, taht isntall video drivers and others, the go to device manager and select yelow device drivers, make right lick select update driver.
That fix and isntall missing drivers !! : )
Hoppe this help !
This is usefull for windows 7 32 bits.
I tested with windows 64 and install perfectly without troubles !!
After clean install, this devices not work at 100% ot just not work:
Brighnes display selector not work correctly:
Only can setup bright from POWER OPTIONS ---> change plan settings
Then move the bright slider and press save changes, and newe bright value is configured.
The control volumen buttons in the left of the machine not work, i dontreally use so i not find how fix, probably somebody form HP can inform hoy fix this.
Sorry for my bad english, my native language is spanish !
Best regards !

Hi Guys,
I have the solution to your problems and I will go ahead an explain it in detail so that no questions will be raised.
I have struggled to get WINDOWS 7 (32BIT) to run on the Touchsmart 300 PC now for three days (and nights) but I know how you can do it.
The problem lies within the VGA Adapter (Graphics Card) this little buddy has incompatible drivers with the inbuilt functions of the Touchsmart PC in its generic (Windows Preloaded) form. Therefore what you can do is the this.
Step 1: Insert Windows 7 (32Bit) disk and start the setup process and follow it until it hits the problem. (Millisecond of Bluescreen)
Step 2: Once the PC starts booting repeatedly press F8 (I mean it just keep on pressing that button until you can select "Safe Mode")
Step3: Once Windows Setup screen is back it will tell you an error! Which is good. INSTEAD of pressing "OK" (to restart) press SHIFT + F10 (opens the command prompt)
Step4: You should automatically be in \Windows\System32 now enter the following command: CompMgmtLauncher (This is the Device Manager).
(If the default directory is not System32 the navigate to it by entering "cd windows" and "cd system 32" (cd = change directory)
Step5: In the Device Manager (do not worry it will take some time to load) select navigate to "Display Adapters" - "ATI Radeon ..." RIGHT-CLICK on it and choose disable. (To be sure Windows will not have any other troubles you should do the same for all highlighted devices. the once with the yellow triangle)
Step6: Once this is done restart your system and let the install run into the normal mode and finish the install.
Step7: Once Windows starts for the first time. Use the provided ATI Radeon Driver from HP (NOT the original one) from the support download website to install the correct driver.
Step8: Resart and enjoy!
Hope this helps and let me say to AMD/ATI yopu guys really suck at your one product drivers!
Cheers and Out.

6.5 install on windows vista 64 bit error USR0057

We can install v6.5 on a windows vista 32 bit, however, on a windows vista 64 bit we are getting the following error..."USR0057"
Defalut installed under the x86 file location, how can we get BO to load on the non x86 file location (simple under program files)
Thanks for the help!

hi
the point is that even if you get this somehow to work your customer will work with a version which is no longer supported in a an environment which was NEVER supported.Your customer must be aware of the risks that result from such a decision.
I would recommend either to upgrade your BO version or to downgrade the windows clients.a solution maybe a terminal server installation of the bo client.
sorry that i cannot provide you with a solution but you have to be aware of the risks you are facing.
regards
stratos

Cannot install clean Windows 7 64-bit to GPT partition

Similar Messages

Maybe you are looking for