Cannot install configuration profile ipad 2

can not install profile using configuration utlity on ipda2. Worked on first iPad but no other iPad works.

Open iTunes, connect your iPad, click on the iPad in the left-hand column then check for updates.
iOS updates are free for iPads & iPhones. I think early ones for the iPod Touch were paid.

Similar Messages

Cannot install configuration profiles using iphone configuration utility, why?

I have several working configuration profiles, which I can distribute both via email and a website.
I'd like to install the profiles through the iPhone Configuration Utility, but I am not able to do so. The devices show up just fine in the list. When I choose the Configuration Profile tab and clicking the install-button on a profile (which will install fine via Email or website) in the list, nothing happens. Regardless of the device beeing out of the box, or activated via iTunes. What am I missing?
I have tried this on several iPad and iPad 2 devices with the latest (4.3.3) firmware installed.

Hi,
I have the same problem. After creating profile with only General tab being set up it is failing to install on my iPad.
Profile installation failed
The profile could not be added to device
Any suggestions?
I even erase all content and setting but that didn't help either.
The only alarming thing is that in my Certificate section I have red message:
"This certificate was signed by and untrusted issuer"
Can that effect installation?
If that is the case how to fixed it?
P.S. iPad was purchased from Apple Store.
Regards,

Installing Configuration Profile Fails

A configuration profile is required to install security certificates to iPad.
Created a configuration profile with iPhone Configuration Utility 2.2. Utility recognizes iPad, but clicking "Install" button on "Configuration Profiles" page does nothing (no error message, nothing). Sending the profile by Email to iPad gives "Mail Cannot Open This Attachment" error when opening configuration profile.
I have previously created and installed profiles successfully to iPhones and the profile created above works in iPhone (3.1.3).

Answering to my own question. I was able to create and install configuration profiles successfully by creating another user account in OS X and using that to install profiles.

I did not install icloud when setup my ipad and now I cannot install icloud on ipad 3 with ios 8.1.

I did not install icloud when setup my ipad and now I cannot install icloud on ipad 3 with ios 8.1. Everything in Settings is complete and correct. I can log in from my PC with no trouble. If I go to icloud.com on Safari on the ipad, it takes me to a instruction page which only says to complete icloud in Settings.

That's happening because icloud.com is not designed to be viewed from the mobile version of Safari on your iPad, only from your computer browser.* You can still access it on your iPad if you're running iOS 8 by going to icloud.com, then tapping on the address bar where the url is displayed, tap the center of the screen and drag down, then tap "Request Desktop Site" under the address bar at the top. This will load the full desktop version of icloud.com. You'll find, however, that not all of the the features will respond to the touch screen.
* That's because all of your iCloud data is already on your iPad and can be accessed from within the apps that you are syncing with iCloud (contacts, calendars, notes, reminders, etc.) If you need to use Find My iPhone (iPad), you can download the free Find My iPhone app to do so.

Can't install configuration profile using iPhone Config Utility 3.5 and iPad iOS 5.1

Sorry for the long title, but...
I had a certificate expire in my configuration profile (that allows access to the Enterprise WiFi network). In the past, that means I go fetch a new certificate, install it into the configuration profile, attach the device to the computer via USB, and download that to the device. It's all good.
With iCU 3.5 and iOS 5.1, that all works fine until the last step. I hit the install button - nothing happens. Zilch. Nada, Zero. I happen to be a developer as well, so I have Xcode open and am watching the device console. Absolutely nothing happens on the device console.
What am I doing wrong? I can't believe that this is broken, and if it is broken I'm the first person to trip on it, so what's up?
(I did workaround this problem by exporting and sharing the configuration via email to the device and installing it from the attachment. That part still seems to work, and the profile itself also seems to work. The problem seems to be with iCU and downloading profiles.)
Thanks for your help.

I ran into same problem. I think ithis might be your problem . This fixed mine I had settings already set and tried to install on new ipad and wouldn't work wouldn't do anything just set there I hit install and never did nothing. What I did was del the settings for configuration and re set them all over again and boom it's worked it works fine for me now. Hope this helps

Apple configurator and ios 6.1 cannot install config profile

I'm using the Apple Configurator v1.2.1 to install my enterprise app into iPad 2's. First of all, I am unable to upgrade from iOS 6.0.1 to 6.1.2. It either fails or gets stuck and I have to "stop". My work around is to upgrade via the device (which is actually pretty fast). My big problem is that I am also installing provisioning and configuration profiles, which include files for the app. Every things seems to go ok, the app and all the data installs properly, so does the profisioning profile, until the end where the configurator tells me to "tap device to install profile" but the profile prompt never appears on the iPad. The iPad goes into setup as if it's a new iPad and the config profile nevers gets installed. I do get a warning saying it can't install the profile. I'm forced to update the configuration manually. I'm updating about a dozen each time, so it's starting to get tedious as well as error-prone. Any ideas would be greatly appreciated.

Use whatever method you wish to update iOS
Go though,the setup as needed
Then try apple Configurator to install your profiles
From memory updating iOS with apple Configurator
Causes the setup to run like a new device the same if you used iTunes to update
As the complete OS is installed
However it will only download iOS once, providing all your devices are the same
Updating iOS on the device still has a setup but it's only for iCloud
And you'd have to download the (smaller) update each time
I would think it is the iOS update and setup that's causing your profiles etc
to fail there maybe to much going on at the same time

Can't install configuration profile on iPad - "The profile ... could not be installed"

Hi all,
I'm trying to create a simple test MDM server.
I'm using a Windows Server 2008 R2, and an iPad (iOS 5.01).
I set up a python based web server to accept requests in port 8080, installed an APNs certificate and created a configuration profile using IPCU with an MDM payload (and a VERISIGN credentials paylod to match it).
I have ports open to on the server (443, 1640, 2195 and 8080 where my server is listening).
I sent the configuration profile to myself, via email and tried installing it on my iPad.
I got the response:
Profile Failed to Install
The profile "MDM test profile" could not be installed.
Does anyone know what could be the problem here? What am I missing?
I have tried installing on an iPhone as well, same problem.
Thanks,
Tomer

Try a clean re-install.
* Download the setup file from http://www.mozilla.com/en-US/firefox/RC (this is for the Firefox 4 release candidate)
* Uninstall Firefox, do not select the option to "Remove my Firefox personal data"
* Delete the Firefox installation directory - http://kb.mozillazine.org/Installation_directory
* Re-install Firefox
This process does not remove the Firefox user data such as bookmarks and passwords which are stored elsewhere in the profile folder.
You may also need to manually reset the Software Update feature by deleting the software update files as shown in the "Software Update not working properly" section here - http://kb.mozillazine.org/Software_Update

How to remove Apple Configurator Profile - iPad

On my iPad a supervision profile has been installed using Apple Configurator. Is there a way to remove this profile without restoring.
When I tried syncing my iPad to my computer a message came up, notifying my that my 'iPad is supervised with another computer and cannot be used with this computer.'
I belive this has occurred because of this supervison profile and I can't seem to remove this profile.
I don't have access to both the Apple Configurator application that was used to create it and the computer that it is supervised with.
I have tried recovery mode and a few other basic ways that could remove this.
I need a way to remove this profile without removing all my data or accessing the Apple Configurator itself.
Max.

Unfortunately, if you don't have access to the computer that the iPad was supervised with you won't be able to unsupervise it without resetting the device (and thus losing all of the apps and data).
The idea behind Supervising is that control lies with the person managing the devices (teacher, I.T. staff, etc), not the end user. In Supervision mode, the person managing the devices is "king" and has control of installing apps, configuration profiles, etc. When an iPad is initially Supervised, it is wiped clean of previous data, apps, and settings. This prevents a personal device from being supervised by another person without their knowledge. Once Supervised, it is no longer a "personal" device…it is managed. The same sort of thing happens when you unsupervise a supervised device…it deletes everything so that the manager is no longer "king" and the user regains all control by starting with a clean iPad without data, apps, or controlled settings.
You may want to try and manually back up as much as you can to services like Dropbox before resetting the device.
I know this is not the answer you want to hear, but I hope it helps understand why it is what it is. Good luck.
~Joe

Cannot Install Lens Profile Downloader

I'm trying to get user created profiles for my Sony cameras and lenses, as LR doesn't have very many built in.
I need to install the profile downloader, which downloads as a ".air" file. I've uninstalled Adobe Air and reinstalled the latest version but when I try to install the "Adobe_Lens_Profile_Downloader_1_0_1.air" file I get the message:
"Sorry, an error has occurred.
This application cannot be installed because this installer has been misconfigured. Please contact the application author for assistance."
Any ideas?
I'm running a Mac on OX 10.7.5
Thanks,
Eli

I saw that uninstalling the previous version (1.0) worked for others, but it has not worked for me. When I try to install version 1.0.1 I get the following error message:
Sorry, an error has occurred.
This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance.
I first installed the latest version of Adobe Air (v3.5). I then tried three different approaches to uninstall ALPD 1.0. First I dragged ALPD 1.0 to the Trash, rebooted the Mac, and then tried to install ALPD 1.0.1. Got the error message above.
I reinstalled ALPD 1.0 from a backup disk, ran it to make sure it was working, then used AppZapper to delete the application, its cache, and its preferences. I rebooted the Mac, and then tried to install ALPD 1.0.1. Got the error message above.
I reinstalled ALPD 1.0 from a backup disk, ran it to make sure it was working, then used AppDelete to delete the application, its cache, and its preferences. I rebooted the Mac, and then tried to install ALPD 1.0.1. Got the error message above.

HT5957 Ios7.0.2 keep getting error message cannot install on my IPAD 2. Please help.

Cannot install IOS 7.0.2 on my ipad 2. Keep getting error message cannot install. Please help

Perform a "hard reset" on the device by pressing down and holding the home button and the sleep/wake button for up to 30secs. until you see a black screen with the Apple logo, then release.
Then test to see if it solved the problem. Then try again.

Cannot instal app on iPad because of new iPad software (?)

Hi, we created a folio using InDesign CC and built the app with the DPS App Builder Version 2.9.0 which we updated on Jan. 13, 2014.
We created an App ID for this app, and created and used the Developer mobileprovision and Distribution mobileprovision that we generated for this app. We also made sure that the these mobileprovisions included the devices that we wanted to test the app in. We were then able to create the ipa file, which was placed on the desktop.
The problem is, we cannot test the app in our iPad even though we created a similar app and tested it on our iPad last year. Every time we add the ipa/app to Library via iTunes, it always says "The app [insert app name] was not installed on the iPad [insert iPad name] because it requires a newer version of iPad software."
The software of the iPad we have is version iOS 5.1.1 and it says that the iPad software is up to date. The model is also MB294LL (if that helps at all). I'm guessing this is one of the earlier iPads, if not the earliest one. Also our Digital Publishing Suite is the Single Edition.
Questions:
1) Is the reason why I can't put the ipa file in this iPad because we used a newer version of the DPS App Builder?
2) Was last year's version of the DPS App builder more compatible with the old iPad?
3) If so, is there a way to create the app that will make it compatible with old and new iPads? Still using the new version of the DPS App Builder (Version 2.9.0) and DPS Single Edition.
4) Again, if this is the case, which software of the iPad is most compatible with the DPS App Builder Version 2.9.0?
Any answers will be a great help.

DPS no longer supports iOS 5. You need to have a device running iOS 6 or later.
Neil

Cannot install enrolment profiles

Tried to install enrolment profiles in a white iMac running 10.7.5 and on a brand new iPad mini.
Both installation failed.
This morning the iMac was able to download the enrolment profile from profile manager, but going through the installation, it fails at the end of the process with the message an unknown error has occurred.
Tried to install on the iPad mini afterwards, got a 500 internal server error after clicking the blue enrol this device button.
I can download and install Trust Profiles and Setting for Everyone Profiles without issue and they install fine.
Currently every time I hit Enroll, I get the 5000 server error on both machines.
I restarted everything a few times.
I created placeholders for both machines, I read this could help.
I tried to change settings in server.app, profile manager to sign and not sign profiles
Nothing seems to work. I can't enrol the devices. Last devices I enrolled was in July, without any issues. A MacBook Pro 2011, an iPhone 5, a Macbook Pro 2009, an iMac 2013 and an iPad1.
Should I continue to pull my hair or wait for a fix? There seems to be quite a few posts along the same issue, none of them resolved. Actually, I saw one resolved, but by moving to a different solution.
Thanks for any suggestions.

Hi,
I have the same problem. After creating profile with only General tab being set up it is failing to install on my iPad.
Profile installation failed
The profile could not be added to device
Any suggestions?
I even erase all content and setting but that didn't help either.
The only alarming thing is that in my Certificate section I have red message:
"This certificate was signed by and untrusted issuer"
Can that effect installation?
If that is the case how to fixed it?
P.S. iPad was purchased from Apple Store.
Regards,

Problems installing Configuration Profile

We're deploying iPhones at the plant, and I'm trying to pre-configure them, using the iPhone Configuration Utility. I've created a couple of Configuration Profiles, but cant seem to get them to install. The test phone is an iPhone 4, running IOS 5.The phone has been activated by the carrier, but not configured. I'm running the Configuration Utility on an iMac, under OS X 10.6.8.
When I attach the iPhone, via the USB connector, it show up under devices. When I go to the Configuration Profiles tab and click the "Install" button for a Profile, either nothing happens or I get an error message saying "Invalid Profile". Haven't been able to find any useful help elsewhere on line, so hoping someone here has some wisdom for me.
Thanks,
Don

nothing concrete, sorry, however, this may help. it has worked for me...
1, wipe and restore the phone.
2, build a brand new config file and try installing that instead.

Installing Configuration Profile via Web

We would like to implement some iPhones in the company.
We want more soon iphone `s roll-out and configuration transfer via USB is very cumbersome.
Can I device configuration automatically install on an iphone?
I read somewhere something about a Profile Web Service.
How can I use the web for automatic distribution of configuration profiles?
If so, where can I find extended tutorial or a script.
I have little knowledge of web + xml.
the enterprise deployment guide is very limited and generally

I create an iphone site with iwebkit.Its is very good kit to create high quality iphone sites. (iwebkit.net)
This site allows mobile users to download files.
It is perhaps a solution for other people with this problem.

Cannot install camera profiles in Raw 5.2

After re-downloading Adobe Raw 5.2 and running the CameraProfiles.exe program and restarting my system I still cannot find any camera profiles under Camera Calibration other than the standard ones in either Lightroom or Camera Raw. I click the dropdown menu in Raw and click Load Settings, but cannot find any camera specific settings. I am running Photoshop CS4 and want to set it up for my new Canon 5D Mark II. Any suggestions?

[email protected] wrote:
> After re-downloading Adobe Raw 5.2 and running the CameraProfiles.exe program and restarting my system I still cannot find any camera profiles under Camera Calibration other than the standard ones in either Lightroom or Camera Raw. I click the dropdown menu in Raw and click Load Settings, but cannot find any camera specific settings. I am running Photoshop CS4 and want to set it up for my new Canon 5D Mark II. Any suggestions?
You are aware that the camera profiles do not have a name the reflect
what camera they are for? The software populates the list with names
like "camera faithful" and "camera landscape". These are selected to fit
what ever camera took the picture and they use the same name for all
camera models. So if names like above are on the list, then they are the
correct ones for the camera you used. It is confusing that they are not
labeled with the camera model.
John Passaneau

Cannot install configuration profile ipad 2

Similar Messages

Maybe you are looking for