Cannot install configuration profiles using iphone configuration utility, why?

I have several working configuration profiles, which I can distribute both via email and a website.
I'd like to install the profiles through the iPhone Configuration Utility, but I am not able to do so. The devices show up just fine in the list. When I choose the Configuration Profile tab and clicking the install-button on a profile (which will install fine via Email or website) in the list, nothing happens. Regardless of the device beeing out of the box, or activated via iTunes. What am I missing?
I have tried this on several iPad and iPad 2 devices with the latest (4.3.3) firmware installed.

Hi,
I have the same problem. After creating profile with only General tab being set up it is failing to install on my iPad.
Profile installation failed
The profile could not be added to device
Any suggestions?
I even erase all content and setting but that didn't help either.
The only alarming thing is that in my Certificate section I have red message:
"This certificate was signed by and untrusted issuer"
Can that effect installation?
If that is the case how to fixed it?
P.S. iPad was purchased from Apple Store.
Regards,

Similar Messages

Can't install configuration profile using iPhone Config Utility 3.5 and iPad iOS 5.1

Sorry for the long title, but...
I had a certificate expire in my configuration profile (that allows access to the Enterprise WiFi network). In the past, that means I go fetch a new certificate, install it into the configuration profile, attach the device to the computer via USB, and download that to the device. It's all good.
With iCU 3.5 and iOS 5.1, that all works fine until the last step. I hit the install button - nothing happens. Zilch. Nada, Zero. I happen to be a developer as well, so I have Xcode open and am watching the device console. Absolutely nothing happens on the device console.
What am I doing wrong? I can't believe that this is broken, and if it is broken I'm the first person to trip on it, so what's up?
(I did workaround this problem by exporting and sharing the configuration via email to the device and installing it from the attachment. That part still seems to work, and the profile itself also seems to work. The problem seems to be with iCU and downloading profiles.)
Thanks for your help.

I ran into same problem. I think ithis might be your problem . This fixed mine I had settings already set and tried to install on new ipad and wouldn't work wouldn't do anything just set there I hit install and never did nothing. What I did was del the settings for configuration and re set them all over again and boom it's worked it works fine for me now. Hope this helps

Using Iphone Configuration Utility-depolyment In Enterprise

Missing some restriction using Iphone Configuraton Utility -
I can't find
1) any restriction to prevent end user from changing passcode on iPAD , Iphone ....
2) any restriction website by URL or Ip address
3) Can't add more than one wireless profile.

I too would like to see this added into the config utility...

My computer cannot install windows 7 using boot comp

hi
my computer macbook pro cannot install windows 7 using bootcomp

You really have not given any details.
Windows is easy to install, if you read and follow the instructions.

Cannot Install Photoshop 5LE using windows 7. What can I do ?

Cannot Install Photoshop 5LE using windows 7. What can I do

Nothing. It's simply not compatible. You need to upgrade to another product.
Mylenium

The people's call me , but i cannot hear them with my IPhone 5! why?

the people's call me , but i cannot hear them with my IPhone 5! why?

Hi azizfotograf,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
iPhone: Troubleshooting issues making or receiving calls
http://support.apple.com/kb/TS3406
Cheers,
- Judy

Apple configurator and ios 6.1 cannot install config profile

I'm using the Apple Configurator v1.2.1 to install my enterprise app into iPad 2's. First of all, I am unable to upgrade from iOS 6.0.1 to 6.1.2. It either fails or gets stuck and I have to "stop". My work around is to upgrade via the device (which is actually pretty fast). My big problem is that I am also installing provisioning and configuration profiles, which include files for the app. Every things seems to go ok, the app and all the data installs properly, so does the profisioning profile, until the end where the configurator tells me to "tap device to install profile" but the profile prompt never appears on the iPad. The iPad goes into setup as if it's a new iPad and the config profile nevers gets installed. I do get a warning saying it can't install the profile. I'm forced to update the configuration manually. I'm updating about a dozen each time, so it's starting to get tedious as well as error-prone. Any ideas would be greatly appreciated.

Use whatever method you wish to update iOS
Go though,the setup as needed
Then try apple Configurator to install your profiles
From memory updating iOS with apple Configurator
Causes the setup to run like a new device the same if you used iTunes to update
As the complete OS is installed
However it will only download iOS once, providing all your devices are the same
Updating iOS on the device still has a setup but it's only for iCloud
And you'd have to download the (smaller) update each time
I would think it is the iOS update and setup that's causing your profiles etc
to fail there maybe to much going on at the same time

ITunes64Setup_exe install to let my iPhone configure?

This is the massage that i get, if i try to install - iTunes64Setup_exe. (The iPhone “Willie's iPhone” cannot be used because it requires iTunes version 11.1 or later. Go to www.itunes.com to download the latest version of iTunes.)
Then it gave me this massege
upload is not configured.
In order to use the quick upload feature, you must first select a favorite folder by right clicking one and choosing 'Set as Favorite'Quick
Please let me know what to do?
Ive allready downloaded this
file://localhost/iTunes64Setup_exe_498.exe

Thank you Carolyn, I understand that and do use the same P/w for both the iphone and the computer and the apps were origionally for the iphone anyway, they just used to back on the computer and now they wont and the imac even cancels them off my iphone when I sync. And it says "Itunes" has made an error, try again...with the coes -54 and -50. This means I canot ack up my iphone properly.

Issues using IPhone Coniguration utility on IOS7?

Has anyone using profiles to lockdown an iphone experienced issues with the profile been removed after upgrading to ISO7 also been unable to re-install the config file via IPhone configuration utility?

I too would like to see this added into the config utility...

Cannot Install Lens Profile Downloader

I'm trying to get user created profiles for my Sony cameras and lenses, as LR doesn't have very many built in.
I need to install the profile downloader, which downloads as a ".air" file. I've uninstalled Adobe Air and reinstalled the latest version but when I try to install the "Adobe_Lens_Profile_Downloader_1_0_1.air" file I get the message:
"Sorry, an error has occurred.
This application cannot be installed because this installer has been misconfigured. Please contact the application author for assistance."
Any ideas?
I'm running a Mac on OX 10.7.5
Thanks,
Eli

I saw that uninstalling the previous version (1.0) worked for others, but it has not worked for me. When I try to install version 1.0.1 I get the following error message:
Sorry, an error has occurred.
This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance.
I first installed the latest version of Adobe Air (v3.5). I then tried three different approaches to uninstall ALPD 1.0. First I dragged ALPD 1.0 to the Trash, rebooted the Mac, and then tried to install ALPD 1.0.1. Got the error message above.
I reinstalled ALPD 1.0 from a backup disk, ran it to make sure it was working, then used AppZapper to delete the application, its cache, and its preferences. I rebooted the Mac, and then tried to install ALPD 1.0.1. Got the error message above.
I reinstalled ALPD 1.0 from a backup disk, ran it to make sure it was working, then used AppDelete to delete the application, its cache, and its preferences. I rebooted the Mac, and then tried to install ALPD 1.0.1. Got the error message above.

Can pass codes be stopped using iPhone Config Utility

We will be managing multiple iPads next year at school. Is it possible to prevent students from setting up a passcode on the shared iPads?
Regards
Rod

We are also a school district with this same problem. We also have the iphone configuration utility and as far as we can tell restricting the creation of a passcode is not possible with that utility. Please post a solution if you find one, and I will as well.

Cannot install enrolment profiles

Tried to install enrolment profiles in a white iMac running 10.7.5 and on a brand new iPad mini.
Both installation failed.
This morning the iMac was able to download the enrolment profile from profile manager, but going through the installation, it fails at the end of the process with the message an unknown error has occurred.
Tried to install on the iPad mini afterwards, got a 500 internal server error after clicking the blue enrol this device button.
I can download and install Trust Profiles and Setting for Everyone Profiles without issue and they install fine.
Currently every time I hit Enroll, I get the 5000 server error on both machines.
I restarted everything a few times.
I created placeholders for both machines, I read this could help.
I tried to change settings in server.app, profile manager to sign and not sign profiles
Nothing seems to work. I can't enrol the devices. Last devices I enrolled was in July, without any issues. A MacBook Pro 2011, an iPhone 5, a Macbook Pro 2009, an iMac 2013 and an iPad1.
Should I continue to pull my hair or wait for a fix? There seems to be quite a few posts along the same issue, none of them resolved. Actually, I saw one resolved, but by moving to a different solution.
Thanks for any suggestions.

Hi,
I have the same problem. After creating profile with only General tab being set up it is failing to install on my iPad.
Profile installation failed
The profile could not be added to device
Any suggestions?
I even erase all content and setting but that didn't help either.
The only alarming thing is that in my Certificate section I have red message:
"This certificate was signed by and untrusted issuer"
Can that effect installation?
If that is the case how to fixed it?
P.S. iPad was purchased from Apple Store.
Regards,

Use System Proxy Settings - when this is selected in FF v3.6.6, does it adhere to the same local IE proxy setting? We use a pac file configured in "Use automatic configuration script."

Does anyone know what Firefox looks at locally on the PC when the "Use System Proxy Settings" setting is selected? It appears to be the default setting, recently changed from "No Proxy" of versions past...
Our company uses a pac file specified in IE under "Use automatic configuration script" - with this new default, does it adhere to the same setting in:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings]

I may be wrong but I think that the "Use System Proxy Settings" makes sense only on Linux and generally speaking "other OSes". As far as I know there is no generic proxy settings in Windows operating system.
The one I know is in the registry part of Internet Explorer.
So in my understanding in Windows, Use System Proxy Settings = No Proxy

I cannot install apps on my iPhone or iPad over WiFi

I have erased my iPhone, changed my Credit Card, changed my passwords, reset my wifi router. There is nothing more to do. Can anyone help me install apps on my iPhone? I've never had this problem before. I simply cannot install apps. The end. Not updates, not new purchases, not free purchases, nothing.

You can turn off iTunes match from settings> music> iTunes match> off. However you may wish to simply hide the content which is not on your phone until you are in a location where you are able to download content that isn't. You can do this at settings> music> show all music> off.

Cannot install Server 2012 using USB bootable flash.

Hello,
We plan to upgrade Server 2003 to Server 2012. I downloaded Windows Server 2012 R2 ISO file from the below link.
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012
Then make this ISO file on bootable USB flash and boot it on computer.
During Windows Setup installation after select partition,
Getting files ready on installation (xx%)
It displayed message that The installation was canceled.
"Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570"
I have tried the following ways.
- re-downloaded the ISO file again
- Installed on VHD
- Installed on different computer
- Tried choosing Server Core Installation or Server with a GUI
Still got the same error. Plese help me how to solve?

I'm not clear about your problem statement. Are you saying that after downloading re-downloading the ISO, the installation failed in all three different installations?
If so, it really does sound like bad media. There have been other instances in this forum where the person downloading was apparently hitting a server on the internet that had a bad copy of the media. They got around the problem by downloading
from a different location, for example, a different part of town that gets routed to a different download server.
. : | : . : | : . tim

Cannot install configuration profiles using iphone configuration utility, why?

Similar Messages

Maybe you are looking for