Cannot install CRS on AIX 5.3 ML09 with HACMP 5.4.1

We have a two-node HACMP cluster, it's handling the networking and storage. (raw LV's) It's a fairly simple setup. I followed the instructions in document 404474.1 "Status of Certification of Oracle Clusterware with HACMP 5.3 & 5.4" to ensure it's compatible.
Full OS and software Versions:
AIX 5.3 ML9 (53-09_SP1_5300-09-01-0847)
HACMP 5.4.1.4
Oracle 10gR2 (10.2.0.1 from the install media, DBA will be updating to .3 or .4 after install)
We've run the cluvfy script. It does complain about some missing patches; however, I've verified that none apply to our system. Ie, some of the patches apply to previous AIX ML, etc. Cluvfy does, however, detect the presence of the cluster and successfully collects the networking info from both nodes.
So, the cluster is running, we run rootpre.sh successfully on both nodes. It properly detects the presence of the cluster and successfully makes several changes to the system.
Next, we fire up the installer. (runInstaller) We provide it with the details for the various directories and what-not, everything is successful until we get to the "Specify Cluster Configuration" screen. It's blank. For some reason, it's not talking to the HACMP and can't acquire any of the cluster configuration data. There are no errors in any logs. We ran the installer through truss at the request of Oracle support, but it didn't seem to show us anything useful.
Has anyone experienced this before? Is there something we need to do in order for the installer to communicate with HACMP?
Thanks!
Adam

Dear Kushan,
Few hints from my side
1) For ECC 6.0 EHP4 -> First ECC 6.0 will be installed on NW7.01 stack. Later you will need to use ehpi tool to upgrade to EHP4.
2) For SCM 7.0 plan the resource allocation for Livecache and Optimizer server. Ensure that they have ample resources for operation.
Regards,
Deepak Kori

Similar Messages

I cannot install FF Mobile into my LG P505R with Android 2.2...why????

I cannot install FF Mobile into my LG P505R with Android 2.2...why????

In general there are two classes of CPUs in Android devices ARMv6 and ARMv7. Firefox requires ARMv7 devices. If you don't see Firefox in the Android market then you are likely on an ARMv6 device.
In the future we hope to provide a solution that allows Firefox to run on ARMv6.

Failure at final check of Oracle CRS stack.AIX oracle 10g RAC with GPFS

HI ，I install oracle 10R2 RAC using GPFS，os is AIX 6.1,but when I installed CRS，at executing the second root.sh ,I am in trouble ，the error information as follow :
Failure at final check of Oracle CRS stack.
10
I look up the log file the information :
The OCR location /data_gpfs/CRS/ocr_disk2 is inaccessible. Details in /orac
leapp/product/10.2.0/crs/log/p615a/client/ocrconfig_6881286.log.
the ocrconfig_6881286.log.information:
2014-01-24 01:32:20.361: [ OCRCONF][1]ocrconfig starts...
2014-01-24 01:32:20.389: [ OCRCONF][1]Upgrading OCR data
2014-01-24 01:32:20.391: [ OCROSD][1]utread:3: problem reading buffer 100f21d0 buflen 512 retval 0 phy_offset 102400 retry 0
2014-01-24 01:32:20.391: [ OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2014-01-24 01:32:20.391: [ OCROSD][1]utread:3: problem reading buffer 100f21d0 buflen 512 retval 0 phy_offset 102400 retry 0
2014-01-24 01:32:20.391: [ OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2014-01-24 01:32:20.391: [ OCROSD][1]utread:3: problem reading buffer ffffb1d0 buflen 4096 retval 0 phy_offset 102400 retry 0
2014-01-24 01:32:20.392: [ OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2014-01-24 01:32:20.392: [ OCRRAW][1]propriogid:1: INVALID FORMAT
2014-01-24 01:32:20.392: [ OCROSD][1]utread:3: problem reading buffer ffffb1d0 buflen 4096 retval 0 phy_offset 102400 retry 0
2014-01-24 01:32:20.392: [ OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2014-01-24 01:32:20.392: [ OCRRAW][1]propriogid:1: INVALID FORMAT
2014-01-24 01:32:20.392: [ OCRRAW][1]proprioini: both disks are not OCR formatted
2014-01-24 01:32:20.392: [ OCRRAW][1]proprinit: Could not open raw device
2014-01-24 01:32:20.392: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2014-01-24 01:32:20.393: [ OCRCONF][1]Exporting OCR data to [OCRUPGRADEFILE]
2014-01-24 01:32:20.393: [ OCRAPI][1]a_init:7!: Backend init unsuccessful : [33]
propriogid:1: INVALID FORMAT
2014-01-24 01:32:20.516: [ OCRRAW][1]propriowv: Vote information on disk 0 [/data_gpfs/CRS/ocr_disk1] is adjusted from [0/0] to [1/2]
2014-01-24 01:32:20.527: [ OCRRAW][1]propriowv: Vote information on disk 1 [/data_gpfs/CRS/ocr_disk2] is adjusted from [0/0] to [1/2]
2014-01-24 01:32:20.960: [ OCRRAW][1]propriniconfig:No 92 configuration
2014-01-24 01:32:20.960: [ OCRAPI][1]a_init:6a: Backend init successful
2014-01-24 01:32:21.191: [ OCRCONF][1]Initialized DATABASE keys in OCR
2014-01-24 01:32:21.349: [ OCRCONF][1]Successfully set skgfr block 0
2014-01-24 01:32:21.351: [ OCRCONF][1]Exiting [status=success]...
I dont know what cause this error,i am really trouble,who can help me !!!

HI ，I install oracle 10R2 RAC using GPFS，os is AIX 6.1,but when I installed CRS，at executing the second root.sh ,I am in trouble ，the error information as follow :
Failure at final check of Oracle CRS stack.
10
I look up the log file the information :
The OCR location /data_gpfs/CRS/ocr_disk2 is inaccessible. Details in /orac
leapp/product/10.2.0/crs/log/p615a/client/ocrconfig_6881286.log.
the ocrconfig_6881286.log.information:
2014-01-24 01:32:20.361: [ OCRCONF][1]ocrconfig starts...
2014-01-24 01:32:20.389: [ OCRCONF][1]Upgrading OCR data
2014-01-24 01:32:20.391: [ OCROSD][1]utread:3: problem reading buffer 100f21d0 buflen 512 retval 0 phy_offset 102400 retry 0
2014-01-24 01:32:20.391: [ OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2014-01-24 01:32:20.391: [ OCROSD][1]utread:3: problem reading buffer 100f21d0 buflen 512 retval 0 phy_offset 102400 retry 0
2014-01-24 01:32:20.391: [ OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2014-01-24 01:32:20.391: [ OCROSD][1]utread:3: problem reading buffer ffffb1d0 buflen 4096 retval 0 phy_offset 102400 retry 0
2014-01-24 01:32:20.392: [ OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2014-01-24 01:32:20.392: [ OCRRAW][1]propriogid:1: INVALID FORMAT
2014-01-24 01:32:20.392: [ OCROSD][1]utread:3: problem reading buffer ffffb1d0 buflen 4096 retval 0 phy_offset 102400 retry 0
2014-01-24 01:32:20.392: [ OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2014-01-24 01:32:20.392: [ OCRRAW][1]propriogid:1: INVALID FORMAT
2014-01-24 01:32:20.392: [ OCRRAW][1]proprioini: both disks are not OCR formatted
2014-01-24 01:32:20.392: [ OCRRAW][1]proprinit: Could not open raw device
2014-01-24 01:32:20.392: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2014-01-24 01:32:20.393: [ OCRCONF][1]Exporting OCR data to [OCRUPGRADEFILE]
2014-01-24 01:32:20.393: [ OCRAPI][1]a_init:7!: Backend init unsuccessful : [33]
propriogid:1: INVALID FORMAT
2014-01-24 01:32:20.516: [ OCRRAW][1]propriowv: Vote information on disk 0 [/data_gpfs/CRS/ocr_disk1] is adjusted from [0/0] to [1/2]
2014-01-24 01:32:20.527: [ OCRRAW][1]propriowv: Vote information on disk 1 [/data_gpfs/CRS/ocr_disk2] is adjusted from [0/0] to [1/2]
2014-01-24 01:32:20.960: [ OCRRAW][1]propriniconfig:No 92 configuration
2014-01-24 01:32:20.960: [ OCRAPI][1]a_init:6a: Backend init successful
2014-01-24 01:32:21.191: [ OCRCONF][1]Initialized DATABASE keys in OCR
2014-01-24 01:32:21.349: [ OCRCONF][1]Successfully set skgfr block 0
2014-01-24 01:32:21.351: [ OCRCONF][1]Exiting [status=success]...
I dont know what cause this error,i am really trouble,who can help me !!!

Cannot install Snow Leopard on Late 2006 iMac with 10.5.8

I tried already two times to update my iMac (currently on OS X Leopard 10.5.8) to Snow Leopard. The update process runs for about 20 minutes. The iMac restarts, and then there's a message that Snow Leopard cannot be installed. One shall contact the software's manufacturer. I checked in the Installer log file and it says something like it could not u(n)mount a volume.
There are 2 external hard drives connected to the iMac via FireWire (one for TimeMachine). Do I have to disconnect them before installing? There's also a TV tuner (DVB-S) from Terratec connected via USB and EyeTV (a version compatible to Snow Leopard) is installed. I already thought that it is maybe the EyeTV software (that came with the Terratec tuner) that prevents the installer from proceeding ...
As stated, I gave it two tries:
The first time I booted the iMac from an external hard drive with 10.5.8 installed on it, ran disk utility to check, repair permissions and verify the iMac's internal disk (--> everything was fine) and then inserted the Snow Leopard DVD and launched the installer.
The second time I booted the iMac from its internal hard disk (with 10.5.8) (=the disk on which I wanted to install Snow Leopard), inserted the DVD and launched the installer.
No success in both cases.
Any suggestions, help ??
Thanks a lot in advance!
Rainer

I think it will work if you restart from the Snow Leopard installation disc. Insert disc. Restart with the C key held down to force startup from the optical drive. You have already done a +Repair Disk+, which is a smart move before doing any system installation. So when Installer comes up, just proceed with the installation targeting your internal drive.

I cannot install Java 6 on my i mac with mountain lionoperating system.

I recently updated from snow leopard to mountain lion os.
I cannot open the internet.Every time i open my internet i am prompted to install Je 6 runtime software which i think is not ain the ox mountainliopn?
How do i go about installing it Please help!

Go to the Utilities folder in your Applications folder and open Java Preferences. If it opens just fine, check the box labeled "Enable applet plug-in and Web Start Applications." (For security reasons, Java will be disabled after 30 days of not being used. If you enable Java here, I highly recommend you disable it in your web browser, as it has proven to be a serious security issue.) If not, you will be prompted to install Java. Click the Install button.

Cannot install Xcode4 on very new MacBook Pro with Lion 10.7.2

Hello,
I am trying to install Oracle DB 10g on my brand new Mac OS X 10.7.2 Lion Mac Book Pro.
One of the Oracle requirements is to have either the:
A) Dec 2003 gccLongBranchTools update installed; or
B) install XCode Tools 1.2 or higher, which includes the correct version of gcc
Well, when I try to install XCode 4 with Mac OS X and iOS SDK's I got 2 errors:
1. an error regarding permissions on sudoers which appears to have been fixed by running Disk Utility - Repair Permissions - at least it's not appearing in the install.log file at this time
2. and the other which is more of a mystery to me, it reads
PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "An error occurred while extracting files from the package “iPhoneSDK5_0.pkg”." UserInfo=0x7fdf8a4d2190 {NSLocalizedDescription=An error occurred while extracting files from the package “iPhoneSDK5_0.pkg”., NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, NSURL=file://localhost/Applications/Install%20Xcode.app/Contents/Resources/Pack ages/iPhoneSDK5_0.pkg, PKInstallPackageIdentifier=com.apple.pkg.iPhoneSDK5_0, NSUnderlyingError=0x7fdf882e8d40 "The file couldn’t be opened because it isn’t in the correct format."} {
I have no idea how to deal with this error or why it would be so. Needless to say, it stops the entire install. I downloaded the latest version of XCode just this morning.
I also thought of trying to install GCC by itself but the info on their site seems to be dated back to Darwin and not sure if the version they have there is applicable to Lion, plus I haven't done "MAKE" or any of the build type process since college. Would like to avoid this approach if possible.
Can anyone offer any solutions. I need to get going on Oracle review!
Regards,
Gerald

KT,
Should have said - 4.2.1 is the version. I did another download while I was waiting for replies on this thread and am going to give it another shot.
Not running anti-virus yet - brand newmachine so haven't installed everything. 400gb free, hard drive passes any checks I've run on it. I haven't looked outside to see the moon yet so not sure of that last one.
Why would I want to create a new user to run the freshly downloaded installer??
mallethead

Cannot Install HP C4680 Printer to New iMac with OSX v10.6.2

I've followed the HP install directions to a tee (for Macs, connect USB before inserting install CD). I've also tried workarounds online ((a) connect USB after install but before set up and (b) turn off computer and printer and reboot and (c) attempt to install from System Preferences). I've also uninstalled and then downloaded installer and new drivers from the HP website and attempted to do (a), (b) and (c) with the downloaded installer and new drivers.
Nothing works. The install goes fine, but when I reach set up, my printer is not listed. When I check the box that says "my printer is not listed" (or something very similar to that), I get a message saying that if my printer is not listed, then I have the wrong installer and need to get the correct installer. However, no matter how many times I uninstall and reinstall the "correct" download from the HP website, I am stuck in "Groundhog Day."
I've been trying to install this printer for three days now. Any solutions would be very appreciated.

Welcome to Apple Discussions.
Have you run Software Update? If not, you should and install the updates suggested. Note whether there is an HP printer driver update amongst the suggested updates. If there is, go ahead and let SU do the update for you. You should have your printer connected and switched on throughout this process.
After this go to System preferences/Print & Fax and see whether your printer is listed. If it is there might be 2 mentions - one for FAX the other for print.
Let's know what all this shows.
Neville

Cannot install using Winebottler, error 'prefix creation exited with error'

Need help! Frustrated! I am new with mac and I am trying to install Cubase 5 using Winebottler. This program runs well on my PC, but since I moved to mac, I want to install it. I was trying to do that using Winebottler, but it keeps saying "Prefix reation exited with error" and "you find a logfile to help with debugging on your desktop". Please help! Any info is appreciated! Thank you!
It shows me following:
###BOTTLING### default.sh
###BOTTLING### Gathering debug Info...
Versions
OS...........................: darwin10.0
Wine.........................: 1.1.44
WineBottler..................: 1.1.44
Environment
PWD..........................: '/Applications/Wine.app/Contents/Resources/bin'
PATH.........................: /usr/gnu/bin:/usr/local/bin:/bin:/usr/bin:.
WINEPATH.....................: /Applications/Wine.app/Contents/Resources/bin
LDLIBRARYPATH..............: /Applications/Wine.app/Contents/Resources/lib:/usr/X11R6/lib
DYLDFALLBACK_LIBRARYPATH...: /usr/lib:/Applications/Wine.app/Contents/Resources/lib:/usr/X11R6/lib
FONTCONFIG_FILE..............: /Applications/Wine.app/Contents/Resources/etc/fonts/fonts.conf
DIPSPLAY.....................: /tmp/launch-ULGMoL/org.x:0
SILENT.......................:
http_proxy...................:
https_proxy..................:
ftp_proxy....................:
socks5_proxy.................:
Hardware:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro6,2
Processor Name: Intel Core i5
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 3 MB
Memory: 4 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MBP61.0057.B0C
SMC Version (system): 1.58f16
Serial Number (system): 730504FQAGU
Hardware UUID: EB740EBC-2265-514B-966C-C24FF7DF4129
Sudden Motion Sensor:
State: Enabled
###BOTTLING### Create .app...
mkdir: /Volumes/Cubase 5.1/My Wine App.app: Read-only file system
ditto: /Volumes/Cubase 5.1/My Wine App.app/Contents/Frameworks/: Read-only file system
ditto: /Volumes/Cubase 5.1/My Wine App.app/Contents/MacOS: Read-only file system
ditto: /Volumes/Cubase 5.1/My Wine App.app/Contents: Read-only file system
ditto: /Volumes/Cubase 5.1/My Wine App.app/Contents/Resources/: Read-only file system
/Applications/WineBottler.app/Contents/Resources/bottler.sh: line 152: /Volumes/Cubase 5.1/My Wine App.app/Contents/Info.plist: No such file or directory
###BOTTLING### Turn on Coreaudio...
wine: chdir to /Volumes/Cubase 5.1/My Wine App.app/Contents/Resources
: No such file or directory
### LOG ### Command '/Applications/Wine.app/Contents/Resources/bin/wine regedit /tmp/coreaudio.reg' returned status 1.
###ERROR### Command '/Applications/Wine.app/Contents/Resources/bin/wine regedit /tmp/coreaudio.reg' returned status 1.
Task returned with status 15.

Welcome to Apple Discussions!
Check http://www.codeweavers.com/
This is just an Apple Software forum.
You might have better luck actually installing Windows on your Mac, with the free http://www.virtualbox.org/
There is also a Cubase version for the Mac:
http://www.steinbergusers.com/forums/ubbthreads.php?ubb=showflat&Number=13124
Apparently there is a version for Snow Leopard. Not sure if it will work with your newer version of Snow Leopard, but you can contact them and ask.

Cannot install xorg Get error about a conflict with e2fsprogs?

IIRC, I got this error message:
:: util-linux-ng conflicts with e2fsprogs. Remove e2fsprogs? [Y/n] y
error: failed to prepare transaction (could not satisfy dependencies)
And this message, too:
cryptsetup: requires e2fsprogs
I'm stuck.
Looks like I'm gonna reformat again!
Last edited by RJARRRPCGP (2010-02-09 00:05:24)

wonder wrote:
RJARRRPCGP wrote:
IIRC, I got this error message:
:: util-linux-ng conflicts with e2fsprogs. Remove e2fsprogs? [Y/n] y
error: failed to prepare transaction (could not satisfy dependencies)
Looks like I'm gonna reformat again!
not really, just do pacman -Syu
Fixed it, for some reason, pacman didn't do a full update. Was wondering why I didn't see much being updated.
Syu did the trick.

Cannot Install Windows 7 with AHCI mode

Hello,
Having just submitted a support ticket to MSI, I was curious to see if anyone else has experienced a similar issue or may be able to suggest a possible resolution.
I recently purchased a MSI Z87-G41 PC Mate for an htpc build.
I've ran into an issue of not being able to install Windows 7 Ultimate 64 bit onto my ANY SATA 3 hard drive with SATA mode - AHCI enabled in bios.
Main parts for the build are:
Motherboard: MSI Z87-G41 PC Mate
CPU: Intel Core i3-4130 3.4 3 FCLGA 1150
RAM: G.SKILL Ares Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600
PSU: Corsair Builder Series CX 600
OS HD: Crucial M500 SSD
During Windows install and selecting the SSD in which to install windows onto..
Windows will prompt with: “Windows cannot be installed to Disk x Partition x. (Show details)
Afterwards, I’ll select ‘Load driver’ and select the “Intel Rapid Storage Technology Driver for 8x series,” provided by MSI drivers download page. Confirmed as a valid driver for the SATA AHCI controller.
"Select the driver to be installed" lists: “Intel(r) 8 Series/C220 Chipset Family SATA AHCI Controller” Looks good, then progress...
Followed by clicking on next- “Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information.”
I've tried installing Windows 7 Ultimate 64 bit via USB drive and OEM disc to no avail.
Performed a test using the same install procedure with my primary desktop computer which uses a MSI z68A-GD65 (G3) motherboard (AHCI enabled.) I was able to install windows to my Crucial M500 SSD without issue.
Confirmed the issue occurs while testing with different hard drives. I have yet to be able to install windows with AHCI enabled on this motherboard.
HDDs tested include:
WD Black WD5002AALX 500GB
Seagate ST3100524AS 1TB
Once I change SATA mode from AHCI to IDE, I was able to install windows without the need of pre-loading the Intel 8 Series SATA/AHCI driver.
Afterwards having installed windows, I decided to test by switching SATA mode back to AHCI. Doing so will cause the machine to bsod upon booting to windows. Later, I performed the registry edit to change IDE to AHCI mode within windows. Followed by again enabling AHCI in bios.
I was able to boot while in AHCI mode temporarily a couple of times until this method stopped working. Any attempt past the bios post, windows will not boot.
I've also tested the manual and XMP profile RAM settings as suggested by the sticky'd thread here https://forum-en.msi.com/index.php?topic=178019.0
I would like to possibly resolve the issue in regards to utilizing AHCI mode for optimal performance for my hard drives and hot swap capability.
When I have more time, I suppose I can run a RAM test; but so far I simply believe it may just be a SATA controller or driver conflict with the motherboard.
tl;dr Cannot install Windows 7 onto any hard drive with AHCI enabled. Works fine with IDE mode.

** Update as of 6/3/2014 ** Issue resolved.
Received my replacement motherboard from RMA. Replacement is working without any issues with SATA mode set to AHCI.
Tested by running Windows 7 and Windows 8 install - both detected my SATA SSD and other HDDs as applicable drives to install Windows onto. Pre-loading the SATA controller drivers was not necessary. Windows boots up immediately without any delay now. Benchmarks are showing valid stats for SATA3 devices.
Also to note, the replacement motherboard came with bios version 1.5, compared the one I sent back which came with 1.6. In case if that had anything to do with it. Not going to risk updating the bios at this point.
Video of issue:
Benchmarks from the old motherboard on the Crucial M500 SSD taken with Crystal DiskMark
Benchmark from MSI Z87-G41 PC Mate (MS-750)
on SATA 3 port set to AHCI
CrystalDiskMark 3.0.3 x64 (C) 2007-2013 hiyohiyo
Crystal Dew World
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]
Sequential Read : 264.792 MB/s
Sequential Write : 143.991 MB/s
Random Read 512KB : 250.614 MB/s
Random Write 512KB : 142.545 MB/s
Random Read 4KB (QD=1) : 24.176 MB/s [ 5902.3 IOPS]
Random Write 4KB (QD=1) : 82.152 MB/s [ 20056.5 IOPS]
Random Read 4KB (QD=32) : 210.018 MB/s [ 51274.0 IOPS]
Random Write 4KB (QD=32) : 134.663 MB/s [ 32876.6 IOPS]
Test : 100 MB [C: 35.4% (39.6/111.8 GB)] (x5)
Date : 2014/05/24 3:25:19
OS : Windows 7 Ultimate SP1 [6.1 Build 7601] (x64)
Benchmark from MSI Z87-G41 PC Mate (MS-750)
on SATA 3 port set to IDE
CrystalDiskMark 3.0.3 x64 (C) 2007-2013 hiyohiyo
Crystal Dew World
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]
Sequential Read : 181.472 MB/s
Sequential Write : 141.275 MB/s
Random Read 512KB : 177.430 MB/s
Random Write 512KB : 141.393 MB/s
Random Read 4KB (QD=1) : 21.646 MB/s [ 5284.6 IOPS]
Random Write 4KB (QD=1) : 68.922 MB/s [ 16826.7 IOPS]
Random Read 4KB (QD=32) : 25.411 MB/s [ 6203.9 IOPS]
Random Write 4KB (QD=32) : 108.275 MB/s [ 26434.3 IOPS]
Test : 100 MB [C: 35.4% (39.6/111.8 GB)] (x5)
Date : 2014/05/24 3:41:42
OS : Windows 7 Ultimate SP1 [6.1 Build 7601] (x64)
Benchmark from MSI Z87-G41 PC Mate (MS-750) **Replacement from RMA**
on SATA 3 port set to AHCI
CrystalDiskMark 3.0.3 x64 (C) 2007-2013 hiyohiyo
Crystal Dew World
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]
Sequential Read : 469.045 MB/s
Sequential Write : 138.655 MB/s
Random Read 512KB : 419.083 MB/s
Random Write 512KB : 135.032 MB/s
Random Read 4KB (QD=1) : 26.454 MB/s [ 6458.5 IOPS]
Random Write 4KB (QD=1) : 89.189 MB/s [ 21774.7 IOPS]
Random Read 4KB (QD=32) : 252.818 MB/s [ 61723.0 IOPS]
Random Write 4KB (QD=32) : 129.909 MB/s [ 31716.1 IOPS]
Test : 100 MB [C: 37.1% (41.5/111.8 GB)] (x5)
Date : 2013/03/10 10:02:50
OS : Windows 7 Ultimate SP1 [6.1 Build 7601] (x64)

Xcelsius 2008 cannot install

Hi all,
A customer cannot install Xcelsius 2008 on XP Home 2002 with SP2, with Office 2003 installed. There error message are "Office XP application : Excel, Word, Outlook or Powerpoint must be pre-installed. Higher versions work fine". Anyone encounter this before?
Regards,
Derek

Per the supported platforms documentation (platforms.txt located in the installation files or media) the following is supported:
Supported Operating Systems
============================
Windows XP SP1   Professional
Windows XP SP2   Professional
Windows Server 2003   Enterprise Edition
Windows Server 2003   Standard Edition
Windows Server 2003 SP1 Enterprise Edition
Windows Server 2003 SP1 Standard Edition
Windows Vista
Windows Vista SP1
Windows Vista 64-bit
Other Tools
=============
Office      (Excel, PowerPoint, Outlook, Word)
Windows Office 2003
Windows Office 2003 SP1
Windows Office 2003 SP2
Windows Office XP SP3
Windows Office 2007
Unfortunately, your customer's XP Home version is not a supported operating system.

Cannot install anything!

I recently upgraded to Mavericks.
I now cannot install anything. I am an admin with security and privacy set to "anywhere".
When I go to install a program the install box appears but is blank no button or anything.
I tried installing a font and the validation never starts and the formatting is wierd and it never installs.
This is driving me NUTS and has rendered my computer useless.
Please HELP!
THanks in advance

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Cannot install firefox. error message: Application failed to initialize properly (0xc0000007b)

Cannot install firefox. Using Dell Satitude D830 with Windows XP Professional SP3.
Was having problems with firefox and acrobat so I uninstalled firefox, repaired Acrobat and am now trying to reinstall firefox. No other programs open.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; (R1 1.6); .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Read the other threads on the same topic, or just install the 12.0.1 update.

I cannot install opanda iexif viewer extension plugin to firefox4.01. Help!!!

When I install Opanda IExif for Firefox Extension, popup tool-tip shows Opanda IExif for Firefox Extension cannot installed. Because it isn't compatible with Firefox 4.01.

Got the solution. The problem was I had Microsoft .Net Framework 4. After I went back to 3.5 the driver installation went through perfectly. Thank you guys for the efforts.HP tech support has to deal with some serious issues and bad attitude. Tech support in my country just told me to forget about this printer working under XP(how comfortable and easy). I have to say I'm mad and exhausted after 3 days of efforts, desperation and frustration cause I bought and trusted HP but the guys that are paid to help just didn't want to help at all.

Cannot install OEM agent on AIX 5.3 version 10.2.0.5.0

Hi all, I need hepl. I can,t install agent on AIX 5.3 version 10.2.0.5.0
log show me:
Command = oracle.sysman.emcp.agent.AgentPlugIn has failed
Exception : java.lang.Exception:
The Management Agent Configuration Assistant has failed. The following failures were recorded:
after execute "agentca -f"
I ve got messange
You can see the log file: /opt/oracle/agent10g/cfgtoollogs/oui/configActions2011-09-22_01-22-35-PM.log
bash-3.2$ cat /opt/oracle/agent10g/cfgtoollogs/oui/configActions2011-09-22_01-22-35-PM.log
Unable to complete request: Fatal error while loading instance XML: oracle.sysman.emCfg.common.CfwException: Unable to unmarshal instance xml=/opt/oracle/agent10g/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.10_2_0_5_0.CFM.3.inst.xml: javax.xml.bind.JAXBException: unexpected error in Unmarshalling.
oracle.sysman.emCfg.common.CfwException: Fatal error while loading instance XML: oracle.sysman.emCfg.common.CfwException: Unable to unmarshal instance xml=/opt/oracle/agent10g/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.10_2_0_5_0.CFM.3.inst.xml: javax.xml.bind.JAXBException: unexpected error in Unmarshalling.
at oracle.sysman.emCfg.core.Cfm.loadAssociatedInstanceAndCreateHolder(Cfm.java:1073)
at oracle.sysman.emCfg.core.Cfm.loadAssociatedInstancesAndCreateHolders(Cfm.java:1086)
at oracle.sysman.emCfg.core.CfmFactory.connect(CfmFactory.java:75)
at oracle.sysman.emCfg.client.CfwClient.<init>(CfwClient.java:141)
at oracle.sysman.emCfg.client.CfwClient.connect(CfwClient.java:87)
at oracle.sysman.emCfg.common.EmCfgActionPerform.initialize(EmCfgActionPerform.java:295)
at oracle.sysman.emCfg.common.EmCfgActionPerform.perform(EmCfgActionPerform.java:307)
at oracle.sysman.emCfg.common.EmCfgActionPerform.serviceRequest(EmCfgActionPerform.java:734)
at oracle.sysman.emCfg.common.EmCfgActionPerform.start(EmCfgActionPerform.java:713)
at oracle.sysman.oii.oiic.OiicRunConfig.main(OiicRunConfig.java:998)
Caused by: oracle.sysman.emCfg.common.CfwException: Unable to unmarshal instance xml=/opt/oracle/agent10g/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.10_2_0_5_0.CFM.3.inst.xml: javax.xml.bind.JAXBException: unexpected error in Unmarshalling.
at oracle.sysman.emCfg.core.Cfm.loadInstance(Cfm.java:1139)
at oracle.sysman.emCfg.core.Cfm.loadAssociatedInstanceAndCreateHolder(Cfm.java:1066)
... 9 more
Caused by: javax.xml.bind.JAXBException: unexpected error in Unmarshalling.
at oracle.xml.jaxb.JaxbUnmarshaller.unmarshal(JaxbUnmarshaller.java:225)
at oracle.sysman.emCfg.core.Cfm.loadInstance(Cfm.java:1129)
... 10 more

i have removed required files and rest this
bash-3.2$ ls -la
total 168
drwxr----- 2 oracle oinstall 4096 Sep 23 10:51 .
drwxr-x--- 3 oracle oinstall 256 Sep 23 10:42 ..
-rw------- 1 oracle oinstall 4525 Sep 23 10:42 OuiConfigVariables.1_0_0_0_0.CFM.0.inst.xml
-rw-r----- 1 oracle oinstall 5288 Sep 23 10:42 OuiConfigVariables.1_0_0_0_0.xml
-rw-r----- 1 oracle oinstall 2342 Sep 23 10:42 oracle.iappserver.repository.api.10_1_2_0_2.xml
-rw------- 1 oracle oinstall 4805 Sep 23 10:42 oracle.sysman.ccr.10_3_1_0_0.CFM.0.inst.xml
-rw------- 1 oracle oinstall 4809 Sep 23 10:48 oracle.sysman.ccr.10_3_1_0_0.CFM.1.inst.xml
-rw-r----- 1 oracle oinstall 5887 Sep 23 10:42 oracle.sysman.ccr.10_3_1_0_0.xml
-rw------- 1 oracle oinstall 12763 Sep 23 10:42 oracle.sysman.top.agent.10_2_0_5_0.CFM.0.inst.xml
-rw-r----- 1 oracle oinstall 16950 Apr 30 2009 oracle.sysman.top.agent.10_2_0_5_0.xml
bash-3.2$ cd agent10g/bin/
bash-3.2$ ./agentca -f
Stopping the agent using /opt/oracle/agent10g/bin/emctl stop agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent is Not Running
Running agentca using /opt/oracle/agent10g/oui/bin/runConfig.sh ORACLE_HOME=/opt/oracle/agent10g ACTION=Configure MODE=Perform RESPONSE_FILE=/opt/oracle/agent10g/response_file RERUN=TRUE INV_PTR_LOC=/opt/oracle/agent10g/oraInst.loc COMPONENT_XML={oracle.sysman.top.agent.10_2_0_1_0.xml}
Perform - mode is starting for action: Configure
Perform - mode finished for action: Configure
You can see the log file: /opt/oracle/agent10g/cfgtoollogs/oui/configActions2011-09-23_09-51-56-AM.log
The plug-in Oneoff Patch Application has successfully been performed
The plug-in Agent Configuration Assistant is running
Performing free port detection on host=rmo-db-bsw.ru
Securing the agent
Performing targets discovery and agent configuration
Starting the agent
The plug-in Agent Configuration Assistant has failed its perform method
The action configuration has failed its perform method
the same record in log
Command = oracle.sysman.emcp.agent.AgentPlugIn has failed
Exception : java.lang.Exception:
The Management Agent Configuration Assistant has failed. The following failures were recorded:

Cannot install CRS on AIX 5.3 ML09 with HACMP 5.4.1

Similar Messages

Maybe you are looking for