Cannot install Desktop v4.14!

I have uninstalled v6.2.2 and cleaned the registry. 
When I try to install v4.14, I get an error window that says that "The wizard was interrupted before palmOne could be completely installed...Click finish to exit the wizard."
When I do that, it just hangs.
Help!!!
Post relates to: Treo 700p (Sprint)

Yes, I restarted my PC and then used the original CD that came with my 700p.
The behavior is slightly different in that it hangs on the "Welcome to the InstallShield Wizardfor Palm". I waited for over an hour and it never got beyond that point.
When I hit "Cancel", nothing happened.
There are three instances of iDriver.exe running, along with one iDriverT.exe and three msiexec.exe
I can kill all except the oldest iDriver.exe
Post relates to: Treo 700p (Sprint)

Similar Messages

  • Cannot install Desktop Software

    Hello,
    I just bought a blackberry 9700. I cannot install desktop software on my computer!!!
    I receive a “DEP – (Data Execution Prevention) error.” And then, automatically close.
    I use Windows Xp.
    Anyone can help me??
    Thanks

    Hi,
        Try running the software CD first then take the CD out and reboot your computer
    after reinsert the CD and restart installing again
    It should work then.....

  • Cannot install desktop manager on windows 7 64bit

    hi,
    unfortunately i am not able to installa the Desktop Manager 6.1.0 B38 Multilanguage on a pc having windows 7 - 64 bits, i already installed it on another pc with windows 7 - 32 bit and it worked.
    please tell me how to solve this problem.
    regards
    Salvatore

    complete uninstall first, restrat your PC/LAPTOP, run setup again with "Run As Administrator"
    if not work download this JAVA "jre-6u31-windows-i586-s" u Can Download From HERE, hope this help

  • Cannot install Desktop Software since replacing hard drive / upgrading OS

    My hard drive on my laptop recently started to fail and so I decided to replace it.  Since I was still running Vista and had a licence available for Windows 7 Pro 64bit available, I decided to switch up to Windows 7 at the same time.
    Prior to this I was able to run the desktop software no problem and was able to sync my Torch with Outlook.
    Since installing the OS and MS Office, etc I have tried a few times to install the BB Desktop Software (have tried the most recent version as well as version 6.1).  The install appears to go successfully, but when the software launches it creates a window with just the title bar and frame visible; the inside is "transparent", showing what is behind it on the desktop.  No matter how many times I've tried to close and reload the program, reboot, completely uninstall and reinstall the desktop software (both 6.1 and 7.0), I get the same result.
    I'm not sure what to do at this point; I've spent enough time customizing Windows7 that I don't really want to go back to Vista and/or try to reinstall Windows 7.  Any ideas or comments?

    Hi pjreid,
    Welcome to the Support Community!
    Can you please verify that you are installing the BlackBerry® Desktop Software in a Windows® user account with administrative priviledges? Have you already tried disabling your anti-virus software during the installation of the BlackBerry® Desktop Software?
    Thanks.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • I cannot install itunes on my computer; I keep getting the following message every time:   Could not access network location %PUBLIC%\Desktop\.   I have a DELL Optiplex 750 Desktop Computer, Running Windows 7 Professional, SP1, 64 bit, 3.40 GHZ, 4.0 GBRAM

    I CANNOT INSTALL I-TUNES 64 BIT ON MY COMPUTER.  I HAVE A DELL 750 OPTIPLEX DESKTOP COMPUTER RUNNING WINDOWS 7 PROFESSIONAL SP1, INTEL Q965/Q963 EXPRESS CHIPSET FAMILY.   THE ERROR MESSAGE I KEEP ON GETTING EVERY SINGLE TIME IS:  
    Could not access network location %PUBLIC%\Desktop\.
    ANYONE HAVE AN IDEA ON HOW TO FIX THIS PROBLEM?   THANKS FOR YOUR HELP IN ADVANCE!

    Hello there, jag123059.
    The following Knowledge Base article offers up some great steps to follow for resolving issues with installing iTunes:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Cannot install Creative Cloud desktop app. It just freezes at a certain point.

    I have a brand new machine running Windows 8.1. I don't know much about specs, so if you need more information on my setup, please tell me where to find it.
    I cannot install the Creative Cloud desktop app. It just freezes at a certain point. I had this problem many months ago. I had a chat with someone from Adobe, and they had no clue what it was. I then called in and the phone was basically passed around from person to person trying to figure out what the issue was. They took over my screen, they tried all of the stuff that I read in the forums. Eventually I asked for the highest up person in the office and that person found a workaround that has been working for all these months.
    However, now that I tried to update the Creative Cloud desktop app, the update froze around 40-50% each time, so I uninstalled the Creative Cloud desktop app, then tried to reinstall it. Now I have the same problem that I had many months ago where when I double click on CreativeCloudSet-Up, and it says it's downloading, it freezes very early on and just sits there. No error message, just sits there forever until I kill the process. I can't even cancel it properly.
    I have very slow internet. I don't know if that has anything to do with it, but I've been downloading all the CC apps directly from the internet, but since I'm paying nearly $60 a month, I'd really like to have the CC desktop app. I'm sick of downloading each update manually off of websites.
    I have read every thread, empty or packed full of replies, and none of the suggestions seem to help me. Maybe I don't know what I'm doing, but I really don't think that paying $60 a month should require me to fiddle with a bunch of files and cleaners, etc. I can't believe this problem has not been solved yet.
    Could it have something to do with my computer? Or is my internet provider blocking something from Adobe? I have no idea and I'm honestly so frustrated. I come home from work everyday and spend the rest of the night trying to fix this issue, and I'm sick of it. I won't call in again, since it was a disaster last time. I was on the line for over 4 hours, and they still didn't properly solve the problem.
    I am 100% desperate and tired of this.

    Nothing? Is there no solution to my problem? Do I have no other option other than to cancel my subscription? Pirating Adobe's software would cause me a lot less hassle than this, and that's not the way it should be.

  • Cannot install BB Desktop Software v7.0 on Windows 7

    I downloaded the new Desktop Software  v7.0 B44, but cannot install it. When I double click on the file (700_b044_multilanguage.exe) it starts extracting itself, and it stops half way (while unzipping Data1.cab) and a message comes up saying "Zip damaged: file Data1.cab: Bad CRC".
    Anyone else has the same problems? Please advise. By the way, I'm using Windows 7, in case that makes any difference. Thanks.

    Hi Iveras,
    I cannot find a RIM KB but this article from Wikki Errors is worth reading:
    How to fix 0x800004005 Error?
    Also this article from Microsoft Answers Win 7
    Windows 7 SP 1 error: E_FAIL (0x800004005)
    This link contains Microsoft site search results I am pursuing:
    Microsoft Support Search Results
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Error 1723 - Long time loyal Blackberry TOUR user - cannot install recent desktop manager

    I cannot install the latest desktop manager on Windows 7.  I have used this phone for YEARS and also syncd fine.  Now I am dead in the water.  The latest install package needs TO BE FIXED.  Well into the installation I get the following message:
    "Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. ActionRepairRimUsbDriverNT.07D232B6_7904_4970_8B22_8F…"
    I have resisted the urge to "upgrade" to the popular newer smart phones from other companies, but I will have to leave Blackberry forever if this problem is not fixable (fixed) within the next few days.
    Please help.
    Mike B

    Hi and Welcome to the Community!
    Ramgopal wrote:
    Check this url..
    https://swdownloads.blackberry.com/Downloads/entry.do?code=15CF76466B97264765356FCC56D801D1
    Select your Blackberry Model - Your Service Provider.- Verify the Blackberry Desktop Software, which displays and download the latest related to your model.... Those are specifically suitable for your blackberry model... Hope this help..
    Actually, not quite...the issue for the OP was the Desktop Software, the link you provided is for Device Software. Indeed, the full portal for Device Software is thus:
    http://us.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html
    There is only one version of Desktop Software, while there are hundreds of versions of Device Software. The Desktop Software, installed to the PC first, followed by installation to the PC of the specific Device Software, is the best way to ensure proper functionality between the PC and the device. However, as with all technology, there is no 100% guarantee.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Cannot instal itunes %desktop%

    cannot instal itunes %desktop%

    Try the following user tip:
    "Could not access network location %PUBLIC%\Desktop\" install errors

  • Cannot install BI publisher Desktop under Win XP SP2 with Office 2003

    Hi Gurus,
    When I tried to install BI publisher Desktp 10.3.2.1 on my PC, winxp sp2 with MS office 2003, at the end of the exe file excuation, I got a error like that:
    Run-time Error '9': Subscript out of Range
    So I cannot install it, do you know how to solve this problem?
    I got .net framework 2.0 and jre,
    I also install Adobe Acrobat 7.0 professional.
    Many thanks!
    Peter

    Any idea? urgent!!
    I googled this error and got the following infor:
    9 Subscript out of range
    Program error,
    verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
    Peter
    Message was edited by:
    PeterCN

  • I cannot install Itunes 10.6 on my Win 7 - 64 bit...Pls help

    I cannot install Itunes 10.6 on my Windows 7 - 64 bit...I am so much frustrated that I will further buy no more Apple products. I have been taking everyones advise and done what was told to me through this forum but till time (since last 15 days) I am unable to install ITunes 10.6 on my said Windows 7 - 64 bit.
    Pls help   Pls help   Pls help   Pls help
    Regards,
    Vivek

    It will work with Windows 7 32 bit.  On a 64 bit you will have to install Windows XP Mode.  You can download it from the Microsoft Website.  The XP Mode will run Windows XP in 32 bit.  Microsoft has easy instructions on the download.  One download at a time.  Install the first download then the second download.  You will have to copy your icon from all program and paste to the desktop if you are going to use it often.

  • I cannot install iTunes on my computer, Winows 7. Error code -45075

    I cannot install iTunes on my computer. Error code -45075

    I used to have the same problem, and found a solution. It is very simple, ,just follow these steps below
    Open the 'computer' file, found on start or might be on your desktop.
    Click the C: drive, found on the left where theres a list of things such as favorites, desktop, etc
    Locate 'Users' and open it.
    Click your username
    Go to AppData. (if its not there: on top, where theres 'File | Home | Share | View', click view, and then on the Show/Hide column, place a check by Hidden Items)
    Click 'Local'
    Locate Temp, and click it.
    Highlight all the files and delete them. There might be some that you cant delete, but thats fine, just click 'skip'
    Restart your computer, and it will be fixed!
    Hope I helped

  • I cannot install ITunes 10.6, my computer keeps blocking on it.

    I cannot install ITunes 10.6, my computer keeps blocking on it. At first I had problems with the upgrade, then I couldn't start iTunes anymore, so I had to uninstall it in orde to reinstall it again. However that doesn't work.
    Everytime I run the installation process, it blocks my whole computer when I'm in about 3/4 of the install procedure; The only thing I can do is push the on/off button to turn my PC off...
    I have an iPhone and would like to be able to synchronize my data... Can someone please help me with this...
    I don't know what to do anymore...
    Thxs
    Mieke (Belgium)

    It will work with Windows 7 32 bit.  On a 64 bit you will have to install Windows XP Mode.  You can download it from the Microsoft Website.  The XP Mode will run Windows XP in 32 bit.  Microsoft has easy instructions on the download.  One download at a time.  Install the first download then the second download.  You will have to copy your icon from all program and paste to the desktop if you are going to use it often.

  • I cannot install updates on my macbook and itunes no longer works.

    I have a macbook that is 3-4 years old. Recently it stopped booting up at all, however was able to restore using original discs. However, my itunes doesn't work and I cannot install any updates at all. I can download the updates from apple, however, once finished it won't install. The installer utility pops up onthe task bar for about 1 second then disappears. I get no error messages or anything. Same thing for when I try to open itunes...the icon bounces once on the taskbar, but nothing opens. Nothing happens. I think the hard drive may be going bad. Can anybody help me with this? Model info below...
    Model Identifier: MacBook2,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.16 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache (per processor): 4 MB
    Memory: 2 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MB21.00A5.B07
    SMC Version: 1.17f0
    Serial Number: XXXXXXXXXXX
    Sudden Motion Sensor:
    State: Enabled
    <Edited by Host>

    If that was the only machine you've installed it on, just throw the disks in the new machine and install away. All of Adobe's CS and CC software licensing allows you to have it installed on two machines.
    If it's older CS software, you would need to install it on the same kind of OS (Mac or PC), but CC software doesn't have that limitation. If you're a CC subscriber, just download the CC Desktop App and install from there no matter which OS you have.
    If you get a "Maximum Activations Reached" error, you'll need to call Adobe to have them clear that issue up if the old computer is completely un-salvageable. If you can still fire it up, just open DW on the old machine and choose Help > Deactivate before installing on the new machine.

  • 'Windows cannot install required files' error while installing Vista SP1

    I'm installing Vista Client SP1 on my Macbook pro and getting the following error:
    Windows cannot install required files. Make sure all files required for installation are available, and restart the installation.
    Almost exactly as described in this KB article: http://support.microsoft.com/kb/930984/ except my error code is 0x80070017. I'm double-checked CRC on my dvd to ensure it's not corrupt. Also I've previously successfully installed Vista SP1 from the SAME DVD on a different Mac Leopard (desktop)
    Any ideas? This is a new Macbook pro, just got it yesterday. Could be DVD drive issue?
    Thanks!

    Did you get far enough to delete the FAT partition BootCamp created, so you could create a new NTFS one?
    http://support.microsoft.com/kb/933925
    or this:
    http://discussions.apple.com/thread.jspa?threadID=1464025&tstart=0

Maybe you are looking for

  • Load Sales Order from Xml file

    Hi, I want to load a sales order from xml file. How can I do so? Where I'll get the xml schema for Sales Order or other documents (delivery,invoice etc)? Plz reply with code and xml file.

  • How to prevent an error of [WIP work order ... is locked-]

    Hello experts Can someone tell me how to prevent an error which [The WIP work order associated with this transaction is currently locked and being updated by another user.  Please wait for a few seconds and try again.Transaction processor error]. How

  • I want to connect Airport Express to my Internet in my dorm?

    I just bought Airport Express and I am unable to get it to connect to the internet. I want to be able to just plug in an Ethernet cable into the Airport Express and have it work wirelessly with my computer. How do I do this?

  • Downloading Acrobat X Pro on a new computer

    I had a major crash of my old computer and although now repaired after reformating the C drive I bought a new computer. I also bought a copy of Adobe X Pro (upgrade Version) since I had Acrobat 9.5 Pro on my old computer.  What additional steps will

  • Keyframe Question.

    Hi folks, I am working with still images, using 'crop' to keyframe wipes in and out, multiple images at different speeds and in different directions at the same time. Also using the Basic Motion keyframes. I'm having a hard time figuring out how to r