Cannot install developer suite

Hello,
I have Oracle 10g installed at my PC. This installation was done successfully. Yesterday I downloaded the developer suite 10g because I want to write some GUI with forms. When I start the universal installer and in the dialog box (specify paths - something like that) I push on the button next but nothing happens. Can someone help me with this problem so I can install developer suite on my PC.

Specify a new home and path before pushing the Next button.

Similar Messages

Installing developer suite on ubuntu 8.04

Hi,
I'm using Ubuntu since a couple of months now and i'am very happy of it.
I want to install developer suite 10gr2 on ubuntu. Of course I can do that with an xp virtualization.
But as the XE database is also available for ubuntu, with explanations for installation http://www.oracle.com/technology/tech/linux/install/xe-on-kubuntu.html I want to do the same with forms builder.
Is there a tutorial for that ? is it even possible?
Thanks for sharing your experience.
Regards
Jean-Yves

HI,
According to the certification matrix
https://metalink.oracle.com/metalink/plsql/f?p=140:1:9614243620221198550:::::
the Linux Ubuntu does not seem to be certified with DevSuite10g....
Sim

Problem Installing Developer Suite on WIndows Vista

Hi! i'm a student of computer science, and i need to install developer suite for a proyect i need to do for one of my classes.
I have a problem installing developer suit on Windows Vista. After i download and unzip both disk, i run the setup from the installer folder and i get an alert that says: "abnormal termination. There's been an internal error. Send the following files to the Oracle Suport Services: Unknown, Unknow, Unknow". I've also tryed with the setup from the main folder and i get the same alert. I don't know what to do, i've tryed setting the compatibility mode to windows XP, runnig as administrator, changing the performance configuration of my computer and nothing. Please help me to install the program!

Which developer suite are you using???

I cannot install Creative Suite 5.5 on my Windows 7 Professional. I keep getting error message: "Exit Code: 15 - Media DB sync failed". I have disabled UAC and Startup items and Services with no luck. Can you please help?

I cannot install Creative Suite 5.5 on my Windows 7 Professional. I keep getting error message: "Exit Code: 15 - Media DB sync failed". I have disabled UAC and Startup items and Services with no luck. Can you please help?

I am sorry Erickkasner but there is no longer direct support provided for Creative Suite 5.5 installation issues.
You are welcome to post any specific errors you are able to discover within your installation log to this discussion. Since you are using Windows then Exit Code 15 could mean one of the following:
Installer database is corrupted
Update pending to your operating system
Improper permissions set for the Media.db
The installation log file should provide additional insight into the exact error you are experiencing. Please make sure to use the find command to look for the words 'ERROR' and 'FATAL' to locate the relevant error messages.

Install developer suite 10g on windows 7

hi to all,
I would like to install developer suite 10g on my notebook windows7 32-bit. It 's possible?
thanks
Silvia

Silvia,
Yes, it is possible to run Oracle Forms 10g R2 on Windows 7, although, it is not officially supported by Oracle. Oracle has only certified Forms 11g (Oracle Fusion Middleware (OFM) 11g) for Windows 7. If your development requires a supported Oracle environment, then I suggest you upgrade to OFM.
The key to setting up Forms 10g on Windows 7 is the preparation. First, the Oracle Installer doesn't recognize Windows managed virtual memory so you will need to change your system virtual memory settings from "Windows Managed" to a specific size (typically 2048mb minimum). Second, you will need to change the compatibility to "Windows XP" for the Forms 10g installer and run the installer as "Administrator" for the installation to succeed.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

How to install developer Suite 10g on linux 9

i am trying to install developer suite 10g on linux 9 ... but i am unable to it.please suggest

Hi,
Intalling developer 6i in Linux is not difficult, but I bet that you won't be much impressed by the graphics. Download the software, extract it and then run ./runInstaller from user Oracle (after giving it permissions), and thats it.
regards

To install developer suite 10g wondows2003

hi to all,
I would like to install developer suite 10g on my notebook windows2003 32-bit. It 's possible?
thanks
Silvia

Silvia,
Yes, it is possible to run Oracle Forms 10g R2 on Windows 7, although, it is not officially supported by Oracle. Oracle has only certified Forms 11g (Oracle Fusion Middleware (OFM) 11g) for Windows 7. If your development requires a supported Oracle environment, then I suggest you upgrade to OFM.
The key to setting up Forms 10g on Windows 7 is the preparation. First, the Oracle Installer doesn't recognize Windows managed virtual memory so you will need to change your system virtual memory settings from "Windows Managed" to a specific size (typically 2048mb minimum). Second, you will need to change the compatibility to "Windows XP" for the Forms 10g installer and run the installer as "Administrator" for the installation to succeed.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Cannot connect to Database after install Developer Suite

Help..
I installed Oracle Database and everything seems work properly. I can connect to the database. (system/oracle@orcl)
well, but after I install the developer suite, I can't connect to the database anymore.
I did check the services and both OracleOraDb10g_home1TNSListener and OracleServiceORCL are started.
I try to search help from google but I cannot solve the problem by myself. I also include two ora file below,
tnsnames.ora
=====
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
====
listener.ora
===
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
====
everything seems should working properly but I still have problem cannot connect to the database. SQLPlus says "ORA-12154" and "ORA-12514"
please help me.. I need to finish my project within next 2 weeks or I have to study one more year. T_T

Hi ...
The Oracle Doc points out as actions in this type of error:
- If you are using local naming (TNSNAMES.ORA file):
- Make sure that "TNSNAMES" is listed as one of the values of the NAMES.DIRECTORY_PATH parameter in the Oracle Net profile (SQLNET.ORA)
- Verify that a TNSNAMES.ORA file exists and is in the proper directory and is accessible.
- Check that the net service name used as the connect identifier exists in the TNSNAMES.ORA file.
- Make sure there are no syntax errors anywhere in the TNSNAMES.ORA file. Look for unmatched parentheses or stray characters. Errors in a TNSNAMES.ORA file may make it unusable.
- If you are using directory naming:
- Verify that "LDAP" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
- Verify that the LDAP directory server is up and that it is accessible.
- Verify that the net service name or database name used as the connect identifier is configured in the directory.
- Verify that the default context being used is correct by specifying a fully qualified net service name or a full LDAP DN as the connect identifier
- If you are using easy connect naming:
- Verify that "EZCONNECT" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
- Make sure the host, port and service name specified are correct.
- Try enclosing the connect identifier in quote marks. See the Oracle Net Services Administrators Guide or the Oracle operating system specific guide for more information on naming.According to the above and my LISTENER settings in listener.ora file which is...
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1521))
)there is one ')' missing closing parenthesis....
So , modify your LISTENER settings ... according to the below....The difference is the ')' in bold....
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
Can you connect now.....????
Regards,
Simon

Error installing Developer suite 10g

Hello,i have downloaded the oracle developer suite 10g 10.1.2.0.2
i get this error whenever i try to start the setup program :
Error in writing to directory C:\Documents And settings\<MY_CURRENT_USER>\Local Settings\TEMP\OraInstall...
please ensure that this directory is writable and has at least 55 MB of disk space
Installation cannot continue
i can see there is a OraInstall<time> directory with a size of app. 50 MB created under my local Documents and Settings\<MY_CURRENT_USER>\LOCAL~1\TEMP
Im using Windows XP sp2, and i have 10g Database Release 1 installed.
i've tried with another account on another similar XP station ( same configuration on both machines ) and i got the same error.
Any help is appreciated.
Thank you

Hi,
Do you have Admin access to the PC? Have you tried using a different TEMP directory?
Rod West

How to install Developer Suite 6i on Cent OS

i need oracle developer suite 6i to run graphics on oracle application server but i cannot install devsuite6i.
i downloaded d2k6irelease2.tar from oracle site. help me to install it on CentOS
i tried:
1. extract .tar into folder
2. yum install FolderName
[root@ServerName DevSuite6i]# yum install DevSuite6i
Setting up Install Process
Setting up repositories
Reading repository metadata in from local files
Parsing package install arguments
No Match for argument: graphics60/
Nothing to do

Hi,
Intalling developer 6i in Linux is not difficult, but I bet that you won't be much impressed by the graphics. Download the software, extract it and then run ./runInstaller from user Oracle (after giving it permissions), and thats it.
regards

Installing Developer Suite 10g for Windows

As part of a prototype test for upgrading to 10g we have installed Oracle 9i database onto a Windows XP PC and are now trying to install the developer suite 10g.
The ORACLE_HOME directory for the DB is D:\Oracle\ora92.
The Oracle Uinversal Installer defaults to this directory for Oracle Home when we try to install the 10g software, but we then get the following error:
Dependencies
Oracle Developer SUite 10g cannot be installed into an existing Oracle 9i 9.2.0.1.0 or higher Oracle Home.
Could you advise please.

Yes, and got the message - install has encountered an error while attempting to verify your virtual memory settings....
We have changed the paging size for the D: drive where we were trying to load to - and it has loaded OK now thanks.

Cant Install Developer Suite

I recently installed Oracle 9i on XP Home. I am now trying to install the Developer Suite. However, I keep getting a "Dependencies" error, "Oracle 9iAS cannot be installed into an existing Oracle9i 9.2.0.1.0 or higher Oracle Home". Does anyone know what I'm doing wrong?

I found the answer to this in the Forms forum. I installed instead in oracle\ora90 instead of oracle\ora92.

Frm-92100 on windows vista after install Developer Suit 10.1.2.02

Hello everybody,
I installed success Developer Suit 10.1.2.02 on windows vista.
But when I tried to run a test form on web browser after .jar is load
A message appears.
FRM-92100: Your connection to the server was interrupted. This may be the result of a network error, or a failure on the server. You will need to re-establish your session.
Details...
Java Exception:
java.lang.StringIndexOutOfBoundsException: String Index out of range: -1
When I check the log file.
….forms90web: Stopped
….Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (127.0.0.1))
This is a critical problem to me.
Please, help me urgent.
Regards.
William.

Thanks Sqaimes
But, I don’t know that’s the solution, anyway can you tell me if you know what’s the patch?
Regards,
William
Message was edited by:
william

How to install developer suite on windows vista

trying to install the dveloper suite on windows vista, keep gettting error that the pagefile(swap file) size is 0 and need to fix this problem.
did any one have this problem
using developer suite x86-101202 (compatibility mode xp sp2)

Have you followed the steps under "III. After the install completed" in this thread?
Forms 10g installed and running on Windows Vista
And note the fourth paragraph from the top. There is a BIG bug in Forms Builder 10g running on Vista. When you try to compile a program unit (procedure) that calls another one that has compiler errors, the Forms Builder crashes. So it can be pretty frustrating if you actually try do any forms development work.

Problems installing Development Suite Patch 10.1.2.3.0 on Windows 7 (32-bit)

Hi all,
I'm trying to install Oracle Development Suite 10.1.2.3.0 on Windows 7 (Service Pack 1 with fairly current Windows Updates) according to Metalink Document 1292919.1.
Everything work just find until I try to install the 10.1.2.3.0 Patchset (Patch Number 5983622) as outlined in Step 5 of the aforementioned Document.
During the step labelled "Copying files for 'Oracle Universal Installer 10.1.0.6.0" I get the following error message twice:
"javaw.exe Entry Point Not Found"
"The procedure entry point GetProcessImageFileNameW could not be located in the dynamic link library PSAPI.DLL".
I acknowledged both of these messages and rest of the installation process runs fine.
I'm not not sure about what to make of these messages, will my installation work correctly or will I have to cope with further issues related to this?
My search on Metalink did not turn up any results related to the Development Suite. I already checked if there were multiple versions of psapi.dll were present on the system as mentionned in Documents regarding this problem while installing Oracle client 10.1.0.5.0 but there is only one.
Any help is apreciated!
Chris

Hi Chris,
Answer to the question is provided on threads:
Install errors - Entry point not located in PSAPI.dll; Package load failure
PSAPI.DLL installation error
Hope this answers your question
Thanks &
Best Regards,

Cannot install developer suite

Similar Messages

Maybe you are looking for