Cannot install driver, cannot update driver, cannot uninstall device

Dcannot install driver, cannot update driver, cannot uninstall device7 SB Audigy4 24 bit
Hi,
I have read the faq & tried numerous time all suggested steps, to no avail
In device mgr, I am unable to uninstall the device, services.exe goes to 50-80% cpu usage for hours & hours, without ever uninstalling my SB
If on the other hand, I try to install with one of the recommended driver, it invariably tells that it need to uninstall a previous driver, then it stays at the uninstall full sreen for hours. Oddly enough, device mgr gives me a code 8 (no driver installed)
I need to nuke whatever's left of the driver, something ctzapxx.exe has not been able to help me do so far
I have spent the better part of the last 3 days trying to get this fixed, you guys are my last hope before I reformat
Tks in advance

Thank you for the information, Harry. If you are installing from the HP CD which came with you then let us check with downloading the All-in-One software from the hp website and then check for the result.
First of all you need to uninstall the software which was already installed on your Vista computer , then we need to download the software and install the All-in-One software.
Here are the uninstallation steps to uninstall the software from the computer:
To completely uninstall the software, run the uninstaller at level three using these steps:
1. Turn the All-in-One off and disconnect any USB/Ethernet cable from All-in-One to computer.
2. Insert the all-in-one CD-ROM into the computer. Cancel any installation windows that appear.
3. Click Start on the taskbar and then click Run.
4. In the command box type the following command and press Enter key:
X:\Util\CCC\Uninstall_L3.bat
(X: is the CD-ROM drive letter of that the all-in-one CD-ROM is in)
Follow the above steps to uninstall the All-in-One software and then restart the computer .
Then download the software from the below web link:
full feature software in vista
Click on the above link and open the web page,after you open the above link click on download only button and save the file onto your desktop.
Here are the instructions to install the All-in-One software:
1) Unplug the USB cable from the back of the computer
2) Install HP Software using downloaded file => Double click on downloaded file => Choose Run and follow the onscreen instructions
3) Before starting the installation disable the antivirus and firewall and then proceed with the installation.
4) Plug in the USB cable when it prompts to connect in the midway of installation
Note : It is important that you connect the USB cable only when the software prompts you while you are installing the software.
Once you install the All-in-One software check for the result and let us know.

Similar Messages

Cannot install HP Photosmart 2610 Driver with windows xp

cannot install HP Photosmart 2610 Driver with windows xp. keep getting registry error messages part way through the instal.. any suggestions? Thanks

Hello,
Please check if you have an ADMIN rights to log into your PC.
Else, create an ADMIN user account and then run the installation ,
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

I cannot install the new update iOS 8.2 on my husban'd Iphone 4S

I cannot install the new update iOS 8.2 on my husban'd Iphone 4S.
I hit "Install Now"
"Agree" to the terms
And then it does nothing, but freezes up. I swipe away the page to try again with the same results over and over.
Solutions I have tried:
I also have connected to iTunes, to download the new software, and no luck!
A system reboot by powering the phone off does not work. There is plenty of free space on his phone.
On the other hand, My Iphone 4S updated no problem doing exactly what it is suppose to do with updates.
So any help would be appreciated.

Try resetting the device: Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Slide to Unlock screen redisplays, hook the device up to iTunes, make sure that your husband's Apple/iTunes/iCloud ID is signed on to iTunes, then try the update again.
Cheers,
GB

Cannot install new version of itunes, cannot remove old version

cannot install new version of itunes, cannot remove old version

http://support.apple.com/kb/ht1925
See this for your query.

Cannot install Realtek HD Audio driver! HELP!

Hi Everyone,
I'm running into a big problem with my Realtek HD Audio setup. After windows installation, it's got the typical Legacy codecs etc and "Audio Device on High Definition Audio Bus" with a yellow exclamation mark. None of them has any drivers associated with it. Funny thing is, I cannot uninstall any one of them. All the Leagcy stuff has no uninstall option, the High Definition Audio Bus does have an uninstall option, but it does absolutely nothing. Install new driver, it won't allow that either. Clicking on them does nothing.
I got the latest setup driver from Realtek and tried to run it, it gives me the "Install Realtek HD Audio Driver Failure" everytime. And I have already installed the UAA. (KB888111)
Finally I found a way to uninstall all of the Legacy codecs etc except the Auido Device on HD thing. Restarted the computer hoping windows will try to reinstall, nope, cannot find anything. So now I'm left with only the Audio Device on HD Audio Bus.
When I disable the HD Audio from the BIOS, it leaves me with no Sound, Video, and Game Controllers. So it only shows up when I enable it in the BIOS, and yet I cannot install a new driver or uninstall it, though I can "disable" it . I can also get into Properties and there is no drivers. Please help!
MSI P35 Neo2-FR BIOS 1.6
C2Q Q6600
2x320 Maxtor in Raid 0
eVGA GeForce 8600GTS 512MB
Corsair XMS2 with DHS 2x1GB
Windows XP w/SP2
Hope I'm not missing any info. Thanks!
Frank

just thought i would add my experience to this thread on th eoff chance that it saves someone the headache i've just been through. Admittedly though it was my own lack of thinking (aka 'beer') that was the problem in the end.
So...
I decided to do fresh install of XP +SP3
All went smoothly except i could not get HD sound. Looking on google and this forum it seemed there was some problem with SP3 and the realtek HD drivers, so i spent ages playing around install and uninstalling the audio drivers in different orders to try and get the damn sound to come out through my HD TV. Normal sound through the stereo jack was working, just not the sound through the HDMI cable into my TV. (YOu might have already guessed now what silly mistake i was making). I also found an audio device in Device manager that i could not find any drivers for.
Anyway, the answer was that the device i needed was the nought to do with my MSI motherboard, but the audio output that goes through the HDMI cable on my gfx card. I can't believe i spent so long trying to get HD sound and all i needed to do was update the mysterious audio device with ATI drivers (which windows could do automatically once i'd installed the ATI gfx drivers). Serves me right for trying to do a fresh install after a belly full of beer. idiot.
All working fine now.

I cannot uninstall itunes version 10.7.0.21 from my laptop use of that I also cannot install the new update.

I cannot uninstall iTunes version 10.7.0.21 from my laptop (windows 7), therefore I cannot install the new iTunes version....!
Every time I try to do it, a "message" from the windows installer pops up saying "The feature you are trying to use is on a network resource that is unavailable", I try to find the installation package "iTunes.msi" but I can never find it either...!
The funny part is, I can still use this version, but I would like the have the update, which can make my computer much faster than now!
Can someone help me out??

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Cannot install latest Catalyst Graphics Driver for w500 under Windows 7 RTM 64 bit

Hi,
I cannot install the latest ATI Catalyst driver (9-9_beta_win7_64_dd_CC)) for the ATI Mibility Radeon 9650 graphics card.
Felet uppstod i programmet med namn: InstallManagerApp.exe, version 3.0.741.0, tidsstämpel 0x4a84bcd2
, felet uppstod i modulen med namn: ntdll.dll, version 6.1.7600.16385, tidsstämpel 0x4a5be02b
Undantagskod: 0xc0000005
Felförskjutning: 0x000000000006f31e
Process-ID: 0x468
Programmets starttid: 0x01ca369873fa09f5
Sökväg till program: C:\Drivers\Graphics\ATI\99\Driver\Bin64\InstallManagerApp.exe
Sökväg till modul: C:\Windows\SYSTEM32\ntdll.dll
Rapport-ID: be82a3f1-a28b-11de-bfc2-0022680b4311
If i run the following command from an administrative command prompt (bin64): atisetup -install -output screen
The installation will seem to succeed according to the repot but Windows sticks to Standard VGA adapter and the annoying "ATI Mobility Radeon HD 3650 (Microsoft Corporation WDDM 1.1) " Driver.
Have anyone been able to install the Catalyst driver and get an external monitor to work?
regards
Michael

Hi @dazed1 ,
I see by your post that you need the drivers for Windows 7 Pro 64 bit. I would like to help.
I checked the website and there is a Full Feature and Basic driver available for Windows 7 64 bit. HP LaserJet 1022n Printer Drivers. Did you try both of these drivers?
I would try and install the preinstalled Windows drivers, if you are having issues using the downloaded drivers on the site with your Windows 7 Pro 64 bit. Run the Add a printer wizard from Devices and Printers.
You could also plug and play the drivers. Connect the printer to the computer and see if Windows will detect the printer and install the drivers automatically.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Satellite L300-1AM PSLBGE - Cannot install the graphic card driver

Hello everyone.
I have a big problem with my notebook concerning the video driver.
Yesterday i've booted my windows and put Windows Vista on it.
I've taken all the drivers from toshiba site but i've encountered a problem regarding the graphic driver.
When enter setup it starts and them it gives me an error "This computer does not meet the minimum requirements for installing the software. Setup will exit". Need to say that before the boot i had Vista also and it worked.
So can you please help me because i don`t know what do to..
i`ve tried all possibilities
Thank you very much
Teodora

Hi
I can not understand this.
The unit supports the Intel GL40 graphic chipset.
The Intel driver from the Toshiba page should be ok
In readme.txt file you can find exact the same info which has been posted by Paolo30.
1. Click "Start" then right click on "Computer" button and then choose Manage.
2. Permit the User Account Control to run by selecting the "continue" button. When the Computer Management window opens select the "device manager" icon. (NOTE: IF UPDATING DRIVER GO TO STEP 3B)
3a. Double click "Video Controller (VGA Compatible)". (Go To STEP 4)
3b. Select "Display adapters" then Double click on the graphics controller
shown.
4. Click on "driver" tab and select "Update Driver".
5. Select the following option: "Browse my computer for driver software".
6. Select the following option: "Let me pick from a list of device drivers on my computer".
7. Click on the "Have Disk..." button and then the "Browse" button.
8. Enter the directory where you unzipped the file you downloaded, and then enter the "Graphics" subdirectory. Locate and highlight the "igdlh.INF" (if 32-bit) or "igdlh64.INF" (if 64-bit). Click on the "Open" button.
9. Click on the "OK" button. A window listing all of the available display types should open. Select the display adapter that your system contains and then click on the "Next" button.
10. Click on the "Next" button. The operating system will install the driver. Click on the "Finish" button when done.
11. Click on the "Close" button and then click on the "Yes" button to reboot. The driver should now be loaded.

Cannot Install Embarcadero Interbase odbc driver on windows 2012

Hello
I am trying to install Embarcadero Interbase odbc driver on a windows 2012 server. But the installer does not load the file into system 32 folder which should contain the DLL for the 64 bit driver. The 32 bit dll goes correctly into syswow folder and the
driver works. Even if i try to copy the dll from a windows 7 machine and register it succesfully using elevated permissions .The driver shows up under 64 bit but does not load the database. I feel something is off with the permissions on system 32 folder under
windows. Any help is appreciated. Thanks.

Contact the application vendor. This is not a Windows issue but an application issue. If they do not support running on 2012, there may be nothing you can do.
. : | : . : | : . tim

Cannot install programs or updates

when i try to install software or updates, when it gets to the stage where you are asked to select a destination volume, i have no choices. just a blank white box. and the continue button is disabled, until i select a destination. but no volume drive is showing up. thus i cannot continue with the installations.
any one know whats causing this problem?

Follow Carolyn's suggestions, particularly regarding repairing your hard disk from the install disk.
Only when this has been successful should you bear the following in mind when updating/installing:
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.

'07 macbook pro with Lion. I cannot install Adobe Flash Player. Tried uninstalling old version - didn't help. I'm a novice and stuck. Help.

Cannot figure out why I can't install Flash Player update. Even tried uninstalling old version - as Adobe site seemed to suggest, but now have no Flash Player.
I'm not really computer savy but am frustrated since everywhere I go on web uses Flash Player. Any ideas, suggestion? Please help.

Feel sooo dumb. Found my error with confidence of your instruction and link. At 'quit' or 'install' box didn't realize need to check box so obviously didn't install. This time accidentally hovered over darkened 'install' button so instructions lit up - voila! Thanks for your help. I'm back in business.

Cannot install 10.6 Updates after Clean Install of OSX 10.6

I've made a clean install of Snow Leopard, to get a "clean" system for Lion. But now i cannot install any updates of 10.6. After the download, there is always a problem with Image data or other problems occur. So now it is not possible for me to ever install Lion. Is there another way to install Lion other than 10.6.8 as minimum requirement? Or is there an 10.6.8 that i can install? I've loaded every version (combo/server/etc.) of the updates but always the same problems.
Thanks
Gijs

GtP-CH wrote:
I used the original DVD's that came with my macbook to reinstall the OSX, it cleanses the HD and turns the macbook in the original state back.
Unless you erased the HD before you used the system disc, the Snow Leopard installer will just replace the existing OS components with those on the system disc. To restore the system to the default factory state, follow the instructions on page 3, "Restoring your computer to factory settings," of http://manuals.info.apple.com/en_US/Snow_Leopard_Installation_Instructions.pdf
If you did this, on restart you would first see the Setup Assistant, requiring you to create a new user account, network settings, etc., or to migrate from a previous system. If you did not see this, you did not do a 'clean' install.

Cannot install iMovie HD update 6.0.1 on my iMac G5

Hi all -
I'm running on 10.4.5, and have iMovie HD 5.0.2 installed.
When I try to install iMovie HD 6.0.1, I get the alert "cannot install on this volume. An eligible iMovie HD application was not found in the location Applications/iMovie HD.app"
Did I miss the 6.0.1 boat by only having 5.0.2?
Do I need to purchase 6.0?
Thanks.
iMac G5 Mac OS X (10.4.5)

sirstewart,
Assuming you have an iMac with the built-in iSight, you're sort of right that you need iMovie HD 6.
Here are some workaround tips (admittedly not very satisfactory):
http://www.macosxhints.com/article.php?story=20051217210335199
iMovie HD 5 does work with the stand alone version of the iSight camera.
My advice: Buy iLife '06!
Matt

Cannot install "Recaller" after updating to PR1.3

Icannot install the Recaller as it says "Application pakage missig: gstreamer0.10-plugins-good-extra" What should i do. thaen I cannot install the video codec also. what to do?
N

I have installed the package 'rootsh' from the extras, and than open x-terminal and after giving the command as directed by you
sudo gainroot
apt-get install gstreamer0.10-plugins-good-extra
After giving the command i get this following in the x-terminal as follows:
BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)
Enter 'help' for a list of built-in commands.
~ $ sudo gainroot
Root shell enabled
BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/home/user # apt-get install gstreamer0.10-plugins-good-extra
E: Could not get lock /var/lib/dpkg/lock - open (11 Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
/home/user #
After this i tried to install the "recaller" but I cannot what to do?
N

Cannot install latest Firefox update. Seems to download OK but that's it!

Frequently receive prompts to download/install the latest update. Click to download and it appears to work. Never installs the update. I've restarted/rebooted/downloaded the upgrade several times. Nothing works! Any thoughts?

same problem. using new 10.7 macbook and trying to download the latest version.
Thanks!

Cannot install i tunes update

Can't install i tunes update for i pod touch

If it's a fifth generation iPod touch, you need to buy and install Mac OS X 10.6, which requires an Intel Mac. If not, click here.
(73164)

Cannot install driver, cannot update driver, cannot uninstall device

Similar Messages

Maybe you are looking for