Cannot install driver vga 7470m for probook 4530s

Hello, I come from Vietnam, I have the following problem, my laptop does not install ProBook 4530s is vga amd 7470m, when I set the laptop screen was dark again, I have to turn off or remove vga go away, the new used to be normal, but only usable only vga HD300. I have tried several times to install win, vga latest update, install all drivers but still above. ask how to fix how, I would like to thank

Hello @pio4791 ,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Even though this is a Commercial product, here is a link to your drivers from your product page for Windows 7. I would uninstall the Video drivers from your device manager. All of the drivers and software. Restart the notebook and check the device manager. If the video drivers are installed not further action is needed.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers that need updating.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

Recovery manager for probook 4530s

where can i download recovery manager for probook 4530s with supports as windows 8

Hi Prabu_23,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I can't install Driver VGA on Intel Web for my T61 - Blue screen when play Red Alert 3

I found the newest Driver VGA from http://support.intel.com/ (for Intel965) but I can't install. The Error message is ("The driver being installed is not validated with this computer...")
And I search on Lenovo support, and setup the newest Driver for X3100.
But when I play RA3, sometime i found blue screen
Can Anyone help me?
My T61: T7100, X3100, Intel965 ...WinXP SP3...

JMoriaty,
Have you installed this driver (v6.14.10.4926)?
John B @ forum.notebookreview.com

Network Controller Driver not found, hp proBook 4530s, Windows 7

I am using a notebook (proBook 4530s), with Windows 7, 64-bit, and in the device manager I get a yellow exclamation mark in Network controller even after downloading and installing the respective driver Atheros / Realtek Wireless LAN Driver(s). The driver packacge extracts itself and there is no confirmation of finishing the setup. The problem started after a BIOS update by the hp support assistant on my pc

You're very welcome. Below is the link to the driver you need for the Ralink wireless card in your notebook. http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_111782_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

Updated AMD 7470M drivers, Probook 4530s, Win 7

Hi,
I need to update my graphics driver for use of Adobe Photoshop on my laptop.
Specifications
Laptop
Product Name: HP ProBook 4530s
OS: Windows 7 Professional 64-bit Service Pack 1
Processor: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz
Graphics
Adapter: AMD Radeon HD 7470M
Current resolution: 2560 x 1080
Refresh rate: 60
Version: 8.910.0.0 (13/10/2011)
Adapter: Intel(R) HD Graphics Family
Version : 8.910.0.0 (13/10/2011)
Graphics memory 4,876 MB
Aero status: Enabled
Downloaded a driver directly from AMD website amd-catalyst-14-9-win7-win8.1-64bit-dd-ccc-whql.exe but it did not work.
Does HP have an updated driver available ?
Thanks.

Hi:
Below are the links to the drivers you need:
USB\VID_03F0&PID_311D&REV_0001:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
PCI\VEN_197B&DEV_2392, 2393:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
PCI\VEN_168C&DEV_002B&SUBSYS_1461103C&REV_01:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
PCI\VEN_8086&DEV_1C3A&SUBSYS_167C103C&REV_04:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
ACPI\HPQ0004:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
USB\VID_138A&PID_003C&REV_0086:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...

Installing Driver Software (full) for HP 4500 G510n-z

I have tried to download the software for my HP4500 G510n-z on my Fujitsu laptop running Windows 7 Professional.
Each time it comes back with the message "Installation Failed" and then starts removing the partaily installed software pieces, and starts prerparing a log for sending to HP. I have tried this several times but each time I come to the same problem point.
When I attach the printer with USB the driver downloads from the printer onto my laptop. What shows up in the control pannl is a HP printer called HP411CE2 (HP 4500 G510n-z). However, with this I can only print over my WifI but cannot control or use the scan functions. For other HP printers I get a an HP application on my desktop thru whcih I can control the sanning function, or check ink levels, etc.
Somehow, this printer has given me several problems in the past of getting disconnected from the Wifi Access Points
As other encoucntered this andif you know how to get this work can you help me with these probelms?
Thank you in advance.

Hi @Netraj
I understand you are unable to successfully install the software for your Officejet 4500, I'd like to help. Please complete the following steps and let me know the outcome;
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Download the software and choose to save as, save to desktop >OJ4500vG510n-z_Full_13_en.exe
After the software downloads and extracts, open the temp folder again, use the instructions from step 1.
Look for, and open the folder starting with 7z (Example: 7zS2356)
Open folder Util
Open folder CCC
If you have an HP computer run the L3uninstall.exe. If you have anon-HP computer run the L4uninstall.exe
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /unregister, and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /regserver, and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
Restart the computer
Download and run the HP Printer Install Wizard for Windows
The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Cannot Install Driver

OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A8-3820 APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 4
RAM: 5844 Mb
Graphics Card: AMD Radeon HD 6550D, 256 Mb
Hard Drives: C: Total - 940455 MB, Free - 855102 MB; H: Total - 305234 MB, Free - 170309 MB; I: Total - 7 MB, Free - 0 MB;
Motherboard: Gateway, SX2370
Antivirus: Norton Internet Security, Updated and Enabled
Apparently as a result of a Windows update, my wife's computer, which is connected to our printer through an ethernet connection via our Linksys E3000 router, lost that connection. As the driver was out of date anyway, I downloaded just the updated driver and attempted to install it after making sure all traces of the old version were removed using the HP uninstaller.
I have tried now, inummerable times to install the driver. I either get the the point wher the install asks what type of connection I have and when it shows via ethernet I get an error message about the MpsSvc (Windows 7 firewall) being stopped or the install fails generating a message that says it's missing a setupfile. I have tried disabling the Norton Internet Security firewall and AV and still the install fails. I have tried activating the Windows Firewall, via the Task Manager (with the NIS Firewall off) to no avail.
One of the solutions I found on this forum from an HP Expert was to use the full software package to install the driver. Even though I do NOT want all the programs that come bundled with it (there used to be the option of choosing what you wanted but no longer) I tried that. I again got the whole firewall scenario message and then had to uninstall all the programs that I didn't want in the first place.
There are two ther computers in the house connected wirelessly to the printer and both work fine. I even tried the wireless route with this computer to no avail.
I know I am not the only one encounter this issue as I seen other postings but I've yet to see a solution that works. I'm trying not to get both frustrated and angry but this should be that difficult a problem to resolve. Prior to both the Windows update and the driver update from HP, this computer worked fine with this printer. There is a conflict between HP's software and Windows 7. Please give me a solution that actually works.
This question was solved.
View Solution.

This did not help at all. I've run a level 4 uninstall and tried both just the driver and whole package and the process halts stating that Windows Firewall must be running. I am also finding that the level 4 uninstall did not remove all traces of HP printer related programs (the C410A is the only HP device connected to this system BTW)
I have completely uninstalled Norton Internet Security and tried to activate the Windows Firewall without success. After reinstalling NIS, I consulted with a site that deals with malware issues. After several tests, they could not find any traces of rootkits, viruses or malware. So, that is not the issue.
When I tried to activate the Windows Firewall, I get the following error notice, "Windows Firewall can't change some of your settings. Error Code 0x800706d9". I continue to get this message at random intervals, "Windows has encountered a critical problem and will restart automatically in one minute. Please save your work". Sometimes I also get this error message as well, "Error 1722 RPC Server is unavailable."
In checking the event log I found the following errors listed, some corresponding to spontainious reboots.
Log Name:      System
Source:        Microsoft-Windows-HAL
Date:          2/2/2015 6:58:01 AM
Event ID:      12
Task Category: None
Level:         Error
Keywords:      (1)
User:          N/A
Computer:      Johnny5
Description:
The platform firmware has corrupted memory across the previous system power transition. Please check for updated firmware for your system.
Log Name:      System
Source:        Service Control Manager
Date:          2/2/2015 5:36:27 AM
Event ID:      7034
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Johnny5
Description:
The Windows Firewall service terminated unexpectedly. It has done this 3 time(s).
Log Name:      System
Source:        Service Control Manager
Date:          2/2/2015 5:36:27 AM
Event ID:      7034
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Johnny5
Description:
The Diagnostic Policy Service service terminated unexpectedly. It has done this 3 time(s).
Log Name:      System
Source:        Service Control Manager
Date:          2/2/2015 5:36:27 AM
Event ID:      7034
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Johnny5
Description:
The Base Filtering Engine service terminated unexpectedly. It has done this 3 time(s).
Log Name:      System
Source:        Service Control Manager
Date:          2/2/2015 5:36:22 AM
Event ID:      7032
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Johnny5
Description:
The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Base Filtering Engine service, but this action failed with the following error:
An instance of the service is already running.
Log Name:      Application
Source:        Application Error
Date:          2/2/2015 5:36:22 AM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Johnny5
Description:
Faulting application name: svchost.exe_MpsSvc, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
Exception code: 0xc0000005
Fault offset: 0x000000000002b20d
Faulting process id: 0x1098
Faulting application start time: 0x01d03eed074c1d96
Faulting application path: C:\Windows\system32\svchost.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: 794ae32f-aae0-11e4-bcc8-f80f4138c1b9
Log Name:      System
Source:        Service Control Manager
Date:          2/2/2015 5:31:17 AM
Event ID:      7023
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Johnny5
Description:
The HP Network Devices Support service terminated with the following error:
The specified module could not be found.
Log Name:      Microsoft-Windows-Dhcp-Client/Admin
Source:        Microsoft-Windows-Dhcp-Client
Date:          2/2/2015 5:30:47 AM
Event ID:      1001
Task Category: Address Configuration State Event
Level:         Error
Keywords:
User:          LOCAL SERVICE
Computer:      Johnny5
Description:
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x74DE2BE23268. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Log Name:      System
Source:        Microsoft-Windows-DNS-Client
Date:          2/2/2015 9:33:30 AM
Event ID:      1014
Task Category: None
Level:         Warning
Keywords:
User:          NETWORK SERVICE
Computer:      Johnny5
Description:
Name resolution for the name wpad.hsd1.ca.comcast.net timed out after none of the configured DNS servers responded.
This is all somehow related to the printer issue as I still cannot install the driver to get it to work properly.
Any suggestions and further help will be greatly apprciated.

Cannot install driver, plz h

i just got a new hard dri've installed and once i installed all the windows updates and everything else i installed my creative zen vision m and it cant install the driver for it. It recognizes it in device manager and has an ! next to it but under windows explorer it doesnt display it, or in wmp or any creative software. I try updating the driver in device manager with the creative disk in and it says cannot install this hardware. PLEASE HELP

Thank you for the information, Harry. If you are installing from the HP CD which came with you then let us check with downloading the All-in-One software from the hp website and then check for the result.
First of all you need to uninstall the software which was already installed on your Vista computer , then we need to download the software and install the All-in-One software.
Here are the uninstallation steps to uninstall the software from the computer:
To completely uninstall the software, run the uninstaller at level three using these steps:
1. Turn the All-in-One off and disconnect any USB/Ethernet cable from All-in-One to computer.
2. Insert the all-in-one CD-ROM into the computer. Cancel any installation windows that appear.
3. Click Start on the taskbar and then click Run.
4. In the command box type the following command and press Enter key:
X:\Util\CCC\Uninstall_L3.bat
(X: is the CD-ROM drive letter of that the all-in-one CD-ROM is in)
Follow the above steps to uninstall the All-in-One software and then restart the computer .
Then download the software from the below web link:
full feature software in vista
Click on the above link and open the web page,after you open the above link click on download only button and save the file onto your desktop.
Here are the instructions to install the All-in-One software:
1) Unplug the USB cable from the back of the computer
2) Install HP Software using downloaded file => Double click on downloaded file => Choose Run and follow the onscreen instructions
3) Before starting the installation disable the antivirus and firewall and then proceed with the installation.
4) Plug in the USB cable when it prompts to connect in the midway of installation
Note : It is important that you connect the USB cable only when the software prompts you while you are installing the software.
Once you install the All-in-One software check for the result and let us know.

HP Officejet 4630 cannot install driver. Windows XP Sp3

Good evening,
I did purchase this printer earlier today and have been on this issue for a couple hours already. The box is not too far, and the printer might go back in soon !
The printer is working fine, it has been connected to my router, the light is always on, it says connected to the wifi system. The wifi connection confirmation page has printed, everything is "Success".
My problem is that anytime i try to install the drivers, the setup searches for a printer that is connected but not yet installed. It notices my printer with the good ip address, then copy a couple driver files and then tells me it fails to install the printer.
The current setup is OJ4630_198, I've found an older version and tried it but pretty much the same results, except that before it stops the installation telling me it fails to do so, it ask me to locate the HP CD on my cd drive, searching for a fax setup installation .png but fails a second later.
I'm pretty clueless, I've tried installing it manually but of course the selection of the Communication Port is somewhat tricky with a wire less printer. I noticed there is a "Create a new port" selection available in which appears an option named "Hp Discovery Port Monitor (HP 4630 series)" which is oddly my new printer. Tried it but it doesn't work.
I've reset my router, pc and printer several times, tried assigning my printer to a different port number, all ended with the same results. It connects to my wifi, but i cannot manage to install the driver for the printer. So my printer list is empty atm..
Thanks for any help,
Much appreciated
Windows XP Sp3
Cisco router
ZoneAlarm firewall..
This question was solved.
View Solution.

Hi,
Please Download and run the Printer doctor tool to find and fix your problem
http://ftp.hp.com/pub/softlib/software12/COL50849/mp-135113-1/HPPSdr.exe
If about doesn't work, try to add printer manually
You can try few things which may help to resolve the issue
1. Make sure your system is up todate. Do a windows update which helps to get alll latest update.
2. Once step 1 done, restart PC and get the latest software from hp.com. You also can use HP installation wizard which help to get the latest software for you.
http://ftp.hp.com/pub/softlib/software12/COL50403/mp-122330-1/hppiw.exe
3. If you still face the problem, you can do "Add printer wizard" manually. Here is the steps:
1. Open Devices and Printers by clicking the Start button Picture of the Start button, and then, on the Start menu, clicking Devices and Printers.
2. Click Add a printer.
In the Add Printer wizard, click Add a network, wireless or Bluetooth printer.
3. In the list of available printers, select the one you want to use, and then click Next. (If your computer is connected to a network, only printers listed in Active Directory for your domain are displayed in the list.)
4.If prompted, install the printer driver on your computer by clicking Install driver. Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
5 Complete the additional steps in the wizard, and then click Finish.
Now you can start printing...
Happy Printing.
Click on the "Thumbs up"button on the left to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

External DVD caddy for probook 4530

I have a probook 4530. I am adding an SSD drive and replacing my DVD device with the internal HDD as a secondary drive. What I would like to do is get an external DVD caddy and place the removed DVD device in the caddy and connect via USB. Is this possible?

Hi,
Well, buy a new external DVD/CD writer now for under $50 is much better than recycle the old one. Anyway, if you wish, you can try something like this:
http://compare.ebay.com.au/like/360317300092?ltyp=AllFixedPriceItemTypes
For my testing, I bought an external burn-everything Pioneer for $119. It's very slim.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Cannot install driver, cannot update driver, cannot uninstall device

Dcannot install driver, cannot update driver, cannot uninstall device7 SB Audigy4 24 bit
Hi,
I have read the faq & tried numerous time all suggested steps, to no avail
In device mgr, I am unable to uninstall the device, services.exe goes to 50-80% cpu usage for hours & hours, without ever uninstalling my SB
If on the other hand, I try to install with one of the recommended driver, it invariably tells that it need to uninstall a previous driver, then it stays at the uninstall full sreen for hours. Oddly enough, device mgr gives me a code 8 (no driver installed)
I need to nuke whatever's left of the driver, something ctzapxx.exe has not been able to help me do so far
I have spent the better part of the last 3 days trying to get this fixed, you guys are my last hope before I reformat
Tks in advance

Thank you for the information, Harry. If you are installing from the HP CD which came with you then let us check with downloading the All-in-One software from the hp website and then check for the result.
First of all you need to uninstall the software which was already installed on your Vista computer , then we need to download the software and install the All-in-One software.
Here are the uninstallation steps to uninstall the software from the computer:
To completely uninstall the software, run the uninstaller at level three using these steps:
1. Turn the All-in-One off and disconnect any USB/Ethernet cable from All-in-One to computer.
2. Insert the all-in-one CD-ROM into the computer. Cancel any installation windows that appear.
3. Click Start on the taskbar and then click Run.
4. In the command box type the following command and press Enter key:
X:\Util\CCC\Uninstall_L3.bat
(X: is the CD-ROM drive letter of that the all-in-one CD-ROM is in)
Follow the above steps to uninstall the All-in-One software and then restart the computer .
Then download the software from the below web link:
full feature software in vista
Click on the above link and open the web page,after you open the above link click on download only button and save the file onto your desktop.
Here are the instructions to install the All-in-One software:
1) Unplug the USB cable from the back of the computer
2) Install HP Software using downloaded file => Double click on downloaded file => Choose Run and follow the onscreen instructions
3) Before starting the installation disable the antivirus and firewall and then proceed with the installation.
4) Plug in the USB cable when it prompts to connect in the midway of installation
Note : It is important that you connect the USB cable only when the software prompts you while you are installing the software.
Once you install the All-in-One software check for the result and let us know.

Cannot install newest Flash player for Mac 0sx 10.5.8

Out of nowhere I got a message telling me I need to udate to the latest Flash Player. I have Mac OS X 10.5.8
I have tried to download and install 100 times and it keeps going in circles telling me that it CANNOT INSTALL
I uninstalled my old player ALREADY..
This is driving mne nuts..
Please tell me what to do
RIGHT AWAY PLEASE
[email address removed]

I think I got it -
first, follow this guy's instructions on using your disk utility to verify and repair your hard drive. http:/http://forums.adobe.com/thread/857425
use the adobe uninstall again, just to be safe - http://http://kb2.adobe.com/cps/909/cpsid_90906.html
restart
follow the instructions of BD Aqua to a "T" on this link - http://https://discussions.apple.com/thread/2805854?start=0&tstart=0
should be an enthusiastic "voila" after that.
good luck my friend, this was a little frustrating to figure out

PhotoSmart C4580 ... Cannot install Driver on Windows 8.1 64bit

Basic driver is working, however, I cannot install the full service driver ... downloads OK ... when attempting to Install the little disk shows up on screen and then it simply stops?

Hi,
Please try following the following steps and let me know if that may help:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c04206080&lc=en&product=3418707&tmp...
Be sure to re-download the latest full feature software from the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=3418...
Please let me know if that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Full HD LED for Probook 4530s

hi there HP Support ,
i want to know that can we give a hardware upgrade to Probook 4530s LED to a Full HD LED screen ?
Best Regards .

Hi,
You can find part (if any/available) from the following manual:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c03054480/c03054480.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Cannot install safari 3.1 for windows

I downloaded safari 3.1, i installed it, windows (vista)/the programm says it is done but it is nowhere on my pc.
Anybody else had this too?
Like to see messages *from the apple support people themselfes*. I find this wrong behaviour of a programm.
Jerry

Safari looks nice, once the font fix is applied. But if the Programs and Features Control Panel doesn't list it, it ain't there.
Normally it would go into "Program Files (x86)" and could be within Apple or AppleComputer.
If you have other Apple software, under AppData Roaming would be Apple Computer => Safari along with an iTunes folder that holds personal bookmarks, but that only gets created when launched and it imports Favorites and settings from IE.
AppleData Local has another Apple Computer w/ Safari subfolders for Database, History, URLLists History.
I run a 'clean ship' and never interfered with startups. I use to worry about 64-bit versions being supported (Apple came out with x64 version finally).
I would run a chkdsk on your boot drive, then look for how to use and run SFC.
http://www.vistax64.com/tutorials/67612-check-disk-chkdsk.html
http://www.vistax64.com/tutorials/66978-system-files-sfc-command.html

Cannot install driver vga 7470m for probook 4530s

Similar Messages

Maybe you are looking for