Cannot install drivers properly

Help
Just got a 6110 and cannot connect to laptop. It detects the phone, but the new hardware wizard will always say
There was a problem installing this hardware:
Nokia 6110 Navigator
An error occurred during the installation of this device
The data is invalid.
PC Connectivity Solution:
Version 8.15.0.0
[Nokia Connectivity Cable Driver:]
Version
Operating system:
Microsoft Windows XP 32-bit Edition, Service Pack 2
Language: English
Language for non-Unicode programs: English
Detected Internet browsers:
- Microsoft Internet Explorer 7.0 (Default browser)
- Mozilla Firefox 2.0
Detected Bluetooth stacks:
- Microsoft (Version: 5.1.2600, Build: 2180)
I've uninstalled and reinstalled the driver and pc suite from the nokia site and from the cd and an older version of pc suite i found online all with no change, rebooting after uninstalling, all to no avail.
Help, it's driving me mad.

I wonder if you have to install Blackberry Link in order to get the drivers.
http://us.blackberry.com/software/desktop/blackberry-link.html
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Similar Messages

  • Cannot install drivers. No Intel(R) Adapters are present in this computer

    Cannot install drivers. No Intel(R) Adapters are present in this computer
    Cannot install drivers. No Intel(R) Adapters are present in this computer
    Reads the error message I purchased an RaLink USB Wireless adapter IEEE 802.11 b installed in an XP Pro system, an Intel D925XEBC2 MB with A P4 CPU 3.80 GHZ
      I have 4 gigs of RAM installed but it reads only 2.87 RAM on system properties
    I installed the RaLink Drivers and the Ralink interface. I get a strong signal and see that the wifi is there but cannot connect. The 1394 Net adaptor #2 is showing as is the USA wireless card
    I was asked to install the PIN which I assumed meant the network security but my keyboard will only input numbers not the letters, otherwise the keyboard operates properly on notepad but not on the RaLink software
    Under other devices it shows  both the Ethernet controller and the Network controller with a question mark "?".
    I have tried uninstalling and starting the computer several times but they will not install correctly.
    The windows interface shows no wi fi system at all. After going back and forth now both windows and the RaLink interface shows no wifi system.
    When I went to https://downloadcenter.intel.com/detail_desc.aspx?agr=Y&DwnldID=18717  and downloaded the 32 bit file and tried to install it I got the error.

    Hi there,
    you're in the wrong forum, but I'll try to guide you.
    (a better forum for your question would likely be this:
    http://social.answers.microsoft.com/en-us/windows/forum/networking?tab=Threads )
    Your RALink wireless adaptor is not manufactured by Intel, that's why Intel driver download won't help you.
    You need to go here (RALink is now Mediatek) to get the drivers for your adaptor
    http://www.mediatek.com/en/downloads/
    Good luck! :)
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • HT1461 I have installed the Windows 8 on my MacBook using BootCamp, but I cannot install drivers for Windows now

    I have installed the Windows 8 on my MacBook using BootCamp already, but I cannot install drivers for Windows now: I've got only BootCamp 3 disk and it doesn't goo even if I start it using compatibility options. And my BootCamp on Mac didn't offer me to burn cd with drivers for windows as I saw in many instructions. How can I resolve the problem? Thanks a lot.

    Go back to Boot Camp: on the 2nd page you get this:
    Download the support software and as Windows is already installed uncheck the 2nd box.

  • Can anyone tell why I cannot install drivers for my IPOD Clasic

    I have iTunes installed and I cannot install drivers for my IPOD Classic while using windows vista 64 bit?

    Download the apps on your syncing computer and then sync to the iPod. Note that you can only sync apps for the one syncing computer you use with the iPod. You can manage music and videos among different computer.

  • Cannot install drivers - Access denied (exteral hdd)

    Hey there, i have a serious problem with my brand-new exteral hard drive (toshiba STOR.E canvio, it works with usb 3 ''AND'' usb 2). It works fine with my old windows XP laptop.
    When i connected it on my new pc, it worked. But i could not find it on My Computer.
    Finnaly i found it like an ''unknown external USB 3''. I tried to install the drivers, but i failed. A message appeared: ''Windows found drivers''. But drivers were not installed. The problem:
           !!!ACCES DENIED!!!
                   PLS HELP

    Hello! After 4 days of searching and searching, i found the solution. 
    1. Restart your PC.
    2. Before the windows logo appears, press F8.
    3. Select Safe Mode.
    4. Install drivers.
    5. Restart your pc, this time in normal mode.
    6. Plug your HDD
    7. ENJOY!!!

  • Windows 7 cannot install drivers for iphone 3gs

    i have an issue with my iphone 3gs it will not let me into the phone all i keep getting is emergency calls and switch off, so i tried to connect to my new laptop (windows 7) to restore my phone and it says unable to install drivers to window 7 could someone help please

    it says iphone is in recovery  mode does anyone know what this means and how to fix

  • My pc cannot install drivers for my iphone 5c

    okay, so my first iphone was an iphone 4, and when i connected it to the computer, it could sync to itunes and also start autoplay to transfer photos and videos to pc. i gave that phone to my mother and got an iphone 5c, remembering to back it up using itunes so i still had all my stuff there. i also moved all the photos/videos i had on my iphone 4 to the pc so that none of them are on the phone anymore. i didnt put them back on my iphone 5c, i just kept them on the pc.
    so now i have a bunch of new photos on my iphone 5c that i would like to transfer to my pc to free up space, but when i plugged it in my pc said: "device driver software was not successfully installed." i opened up task manager and it shows up in "other devices" as "iphone", and when i click properties it says "The drivers for this device are not installed. (Code 28)." clicking "search automatically for updated driver software" just says "windows could not find driver software for your device." clicking "browse my computer for driver software" and browsing in C:\Windows\System32 while having the "include subfolders" button checked just like this article told me to: iOS: Unable to import photos to computer - Apple Support leaves me with "Windows found driver software for your device but encounted an error trying to install it. MTP USB Device The system cannot find the file specifed." ive tried uninstalling the iphone and reinstalling it but it gives me the same error message every time.
    my mother's iphone 4 still connects the computer with no problem, and also still connects to itunes. my iphone 5c can connect to itunes. it just wont connect to the computer. my father also has an iphone 5c, and it can also connect to itunes but it gives me the same problem as mine. the computer i have is a Windows 7 Home Premium and it is 64-bit. i havent tried this on a different computer because i cant, i dont have a different one and i dont really have anyone else to help me, so i dont know if this is an issue that is exclusive to my own computer or not. im sorry that this is so long, i just wanted to add as much detail as i can.

    Uninstall and reinstall iTunes

  • Ipod Touch 4th gen wont turn on, or install drivers properly...

    I Have an Ipod I had recived from my cousin to try and fix. The Ipod does not turn on but the first time I plugged it in, the drivers installed correclty, but I could not restore it (error 1600) Then I tried DFU mode, that didnt work. So I then uninstalled the driver to try and re-install it, now it shows up as 'Apple Mobile Device (DFU Mode)' with a yellow exclamation mark and won't properly install the driver or show up in Itunes. Any ideas on getting the Ipod out of DFU and properly reinstalling the drivers? I've already tried re-installing Itunes for this. I have also tried every possible solution on this website for the 1600 error. Any help is appreciated. Thank you.

    How long did you hold the buttons? Keep holding them until the Apple logo comes on. May take up to 30-sec. As far as Apple changing you, if it's under a year old, them may do it for free. 
    Basic troubleshooting steps 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Cannot install drivers prope

    I recently bought a second hand SB 5. li've! Digital off someone, whenever i download and run the install i recieve the message that it cannot find my sound card. I however was able to install a driver which comes with windows XP which has worked, but if i play on battlefield 2 the sound works perfectly except for the messages that the bots say come out slow and jumpy. I tried installing an up to date driver which again cannot find my card so i extract the driver itself with winrar but once i have installed the driver i have no sound in the rear speakers.
    I have checked that the windows settings are on 5. and have tried installing the eax console but it cannot find my sound card.

    Hi there,
    you're in the wrong forum, but I'll try to guide you.
    (a better forum for your question would likely be this:
    http://social.answers.microsoft.com/en-us/windows/forum/networking?tab=Threads )
    Your RALink wireless adaptor is not manufactured by Intel, that's why Intel driver download won't help you.
    You need to go here (RALink is now Mediatek) to get the drivers for your adaptor
    http://www.mediatek.com/en/downloads/
    Good luck! :)
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Cannot install drivers- HELP!!

    The issue right now is that my laptop (gateway) is NOT recognizing my iPod and itz driving me mad!! I think I have found the root cause. When I plug my iPod in and go to device manager....it comes up as "unknown device". I right click and device status says that there are no drivers for this device. So I try and install the drivers (usbstor.sys and usbstor.inf)...i've done this several different ways....directing it to the CD that came with the iPod....pointing it to C:\program files\windows\inf...etc.
    The message that keeps popping up is "Cannot complete hardware update....no suitable drivers were located that better fits the software already installed..." or something along those lines. I'm at work right now so I can't remember the exact wording...I will post some screen shots when i get home.
    Here's all the things i have done so far:
    - exchanged iPod
    - uninstalled/reinstalled itunes, ipod setup
    - removed all itunes, ipod and quicktime
    - cleaned out my temp files
    - i have reset my system settings to a date prior to when i started having issues with my iPod
    i have no idea what the issue could be. When I check the USB port for drivers when my iPod is unplugged...it shows two drivers....usbhub...and something else.
    I read somewhere that I should check the INF file to make sure that my device is on there. I did this right before leaving for work and did not see "Apple" or "iPod" or anything of that sort on there. Could this be the issue? I did not have time to check my device name and see if it was listed but I will when I get home.
    Any suggestions?? anyone with the same issue and solution??...any help would be greatly appreciated. Right now i have a wonderful $300 machine that is useless right now. Also, i am running on windows XP home....and when I first got my iPod...everything was working ok until one night i left it connected to my comp overnight....and the next morning my comp was not recognizing it.....

    Go to the site where you get the drivers from and select correct version of drivers then download again it will get solved possibly
    do reply
    cheers TGT

  • Cannot install drivers for iPod 5th generation on Windows 7 Home Premium - shows a Bluetooth peripheral device

    Connects to windows 8 without a problem.

    Hey shabnamsarup,
    Welcome to Apple Support Communities! I found an article that should help you out. I would pay special attention to step 9) Verify that USB drivers are installed, but would also go through all of the steps to make sure that it isn't something else causing the issue:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Take care,
    David

  • Vista 64bit cannot install drivers for my new 80GB classic

    Hi there,
    Vista cant install the drivers for my ipod. It seems to see a device then when it searches for the drivers it asks for a disc that came with the device ??? Does this actually knowingly work with vista 64 and if so how do i install the drivers. I have the new ITUNES installed.

    I use 2 hard drives,Vista and XP.Vista has many problems, either ipod vista drivers are not available,or it is Vista.Works well on XP.I have the same trouble with Vista

  • Cannot Install Drivers for ZR2440w

    I have been trying to install the driver files for my new monitor and repeatedly get one message saying that the files installed successfully, to be followed by one saying that the files did not install. When I try to reinstall, I get a message saying "access is denied."
    I've attempted to update the driver directly without success. The computer indicates that it is a generic PNP monitor and the best driver (the windows driver) is installed. It will not install the driver files where they were extracted.
    My computer is running Window7 64bit. I have administrator rights, so the work-around for Vista does not apply here.
    Any advice is appreciated.

    Do you have an alternate monitor? If so, I would try unplugging the ZR2440w and uninstalling the drivers that are currently installed for it. After you do that, reboot the computer. Once the computer is back on, try installing the drivers once again and see if that works.
    Best of luck,
    Kyle  
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Cannot install drivers off of

    It crashes every time right after playing the video, right when I click "Next". The DemoShield Player then crashes, and if I send an error report to Microsoft it tells me the problem is related to Quicktime. Does the installer use Quicktime for something? I have the new Quicktime 7 installed, so I think that might be the problem, but would like to verify that before hunting down and downgrading to Quicktime 6.
    Also, do the drivers on the site include all of the applications that are on the CD? I would normally assume so as all of the other hardware I have ever owned provided complete drivers, with the exception of my Audigy. That, and the total of all downloadable files is around 00MB but the CD is filled completely...

    I was able to install the drivers off of the CD intitially but after I updated Quicktime I could no longer access the CD installation or for me the documentation for the same issues that you experienced. I tried a number of things including the suggestion to move the installation into a folder on my hard dri've but that did not resolve the problem. What is worse it seem that it is near impossible to get an older version of Quicktime so I finally had an idea. If quicktime is nessessary for X-FI installation then what would happen if someone did not have Quicktime installed? Would a version that would work with the CD be installed. Nothing to lose so I uninstalled quicktime. With Quicktime uninstalled I was able to access the driver/program installation screen and access the docs. Perhaps you would be able to install the drivers etc. by that method and then reinstall Quicktime. Clunky workaround but until Creative Labs and/or Apple find a solution it might just be the only method.

  • Cannot install drivers in win 7 32 bits using bootcamp 4 or 5

    I posted this question yesterday.
    anyway, I have a imac midi 2011, 21,5 inches using OS x mountain lion 10.8.2. Manuals say I have to install bootcamp 4, because I install windows 7 profesional 32 bits.
    Al follow all this instalation requirements, but when I try to install system say This software is not compatible.
    I Downloaded from appel suppor site to PC intel and after I copy the .zip file in a root of USB formatted in FAT 32.
    Finally is not possible download any driver. I I want to install an specific driver, is same problem.
    I did all this steps but downloading bootcamp 5, and got same results. I understood Bootcamp 5 is only to install win 8 o win 7 64 bit, am I right?
    Thanks for your help
    Gilberto

    To teh best of my knowledge, Boot Camp 5 only supports 64 Bit Windows installations (as it is designed for 64 bit hardware).  I dont recall positively, but I believe that Boot Camp 4 supports both 64 bit and 32 bit windows installations, but the installer may default to 64 bit mode.  You may have to extrace the drivers and install them manually in 32 bit mode.

Maybe you are looking for

  • Executing Operating system command

    I have a file(ftp)-xi-file(ftp) scenario. I want to run a operating system command on output/processed file which is on a different physical server through a script. But I have seen my script is not working. But when I did the same on the same physic

  • EJB/8i deployment and SSL

    Hello JDev Team, I want to use SSL encryption and authentication in my InfoSwing BC4J Oracle8i application. For Local Deployment it's quite transparent you just define appropriate LocalConnection class and SSL works fine. But for EJB/8i Deployment it

  • ECess and HSCess Purchase Tax Account Ledgers in Liability

    Hello All     By default when you select IN_COA Chart of Accounts why Cess and HSCess Purchase Account Ledgers are in liability Drawer, in Reality were the purchase tax what you paid is Asset. Please Clarify Thanks Santhosh.k

  • Authorisation Variable throwing Internal Server Error - Java NullPointer Ex

    Hi, I've created an Authorisation Object on Service Organisation (0CRMSE_OG_R) and restricted it to a few values, assigned this to a role. On the BEx query, I've created a variable on Service Organisation of type Authorisation. When the report is exe

  • Adding bitmap images to UDI custom page

    Hi All, I have a basic issue regarding bitmap images and UDI custom screens.  The issue is that I cannot get any images to display on my page; they appear as "Image not Found" in the preview window.  I am putting my images in the same folder that the