Cannot install Final Cut Studio on new Mac Pro

When I go to install Final Cut Studio on my new Mac Pro, it tells me that "Final Cut Studio Installer requires that your system have a Quartz Extreme capable video card."
I have the ATI 5870 and, just a wild guess here, I'm betting it does support Quartz Extreme.
A software update doesn't help me here because I cannot get the software installed the first place to be able to update it. What should I do?

FCS 1...Final Cut Pro 5.0? Won't work on an Intel. PowerPC only. You need at least 5.1...which wasn't a free upgrade, so updating won't work. You need FCP 5.1, FCP 6 or the most recent FCP 7. Those are the only versions that will work on the newer macs.
Shane

Similar Messages

Installation of Final Cut Studio on new Mac Pro

Hello all,
I have just purchased a new Mac Pro, and am preparing to install Final Cut Studio upgrade. The wrinkle for me is that I have Final Cut Pro 3.02 installed on an old G4 Power Mac. I have two video projects on the old computer, also backed up on external drives, that I want to be able to edit on the new computer.
I am planning to install my old FCP software on my new Mac Pro, then install the FCS upgrade software. Is there anything I should know or do before doing this to make sure that I will not have any trouble either 1) installing Final Cut Studio upgrade, or 2) accessing my old FCP files.
Many thanks in advance for your wisdom and assistance.

I've successfully installed Final Cut Studio. Thanks, David, for the installation tip.
Now I am holding my breath that I will not have any trouble copying scratch files for my most important projects to my second hard drive, or opening these projects on my new computer.

How can Install Final Cut Studio in my Mac Pro Early 2009 ??

I have Final Cut Studio 7 NOT installed yet and Mac Pro Early 2009 with OSX 10.9.5. I have Final Cut Pro X Version 10.1.4 installed. Can I installed Final Cut Studio here together with FCPX ?? Maybe not. What is the best way to install FCP Studio??
Do I need to make a partition? How? If so, what is the best OSX Version for FCP Studio ?? 10.6, 10.7, 10.8, 10.9 ??
Thanks for any help I can get
Alberto Marban

Here is the Best Practice Guidelines from Apple:
Final Cut Pro X, Motion 5, Compressor 4: Installation best practices - Apple Support
MtD

Error messages I when install final cut studio on my Macbook Pro

Why am I getting error messages, I when install final cut studio on my Macbook Pro? The Mac book Pro is a 2.5 ghz 17'. The software; FC Studio is about a year old.
Boe

What error message(s) are you getting?
Also, if you don't get an answer here, you might post in the FCS discussion.

Problem installing Final Cut Studio 2 on MacBook Pro

I'm trying to install Final Cut Studio 2 on a MacBook Pro / Snow Leopard but when it comes to choosing install options Final Cut Pro is greyed out and just says skip.
I've done some research and found people with the same problem but none of the fixes I've seen have worked. I also have Logic Pro installed - which I installed first - which seems to be causing the problem. I've tried removing Logic but am still seeing the same problem.
Besides a clean install does anyone have any suggestions?

Read this article on how to install final cut pro after logic studio.

Cannot install Final Cut Studio 7 on new Mac Pro

I've just purchased Final Cut Studio 7 (Academic edition) for my Mac Pro (brand new G4 running 10.6.2), and it refuses to install. When I start the download package I get an Alert:
"Final Cut Studio Installer requires that your system have a Quartz Extreme capable video card."
and just quits. I looked on the specs online (http://www.apple.com/finalcutstudio/specs/) and it states that I need
"ATI or NVIDIA graphics processor (integrated Intel graphics processors not supported)"
I have 2 NVIDIA graphics cards, both GeForce GT 120. Are these not Quartz Extreme capable video cards?

First of all you don't have a G4. A G4 is an obsolete computer that doesn't run Final Cut Studio.

Re-Installing Final Cut Studio 5 on Mac OSX 10.6.8

I used to use FCP 5 on my Mac using OS 10.5.8, after I upgraded to 10.6, I realize there's some problem opening FCP files,
I tried to unistall and re-install FCP 5 on my Mac now, which is using 10.6.8 now, error message shows
"Your computer does not have the hardware required to run this software. See the Read Me for details."
In addition to that, I had changed my display card from ADM Radeon 2600XT(which used to work) to NVIDIA GeForce 8800 GT; I'm not sure if that's also a cause, but I suppose not.
Here's my config.:
Mac:
Model Name:          Mac Pro
Model Identifier:          MacPro3,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.8 GHz
Number Of Processors:          2
Total Number Of Cores:          8
L2 Cache (per processor):          12 MB
Memory:          10 GB
Bus Speed:          1.6 GHz
Graphic/Display:
NVIDIA GeForce 8800 GT:
Chipset Model:          NVIDIA GeForce 8800 GT
Type:          GPU
Bus:          PCIe
Slot:          Slot-1
PCIe Lane Width:          x16
VRAM (Total):          512 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0611
Revision ID:          0x00a2
ROM Revision:          3233
Displays:
SyncMaster:
Resolution:          1280 x 1024 @ 60 Hz
Pixel Depth:          32-Bit Color (ARGB8888)
L222W:
Resolution:          1680 x 1050 @ 60 Hz
Pixel Depth:          32-Bit Color (ARGB8888)
Thanks a lot!

A follow-up question, I had it successfully installed and worked on the same computer with FCP 5 when the OS was 10.5.8.
and is there anything can do to upgrade the FCP 5 to 5.1 (instead of buying a new version FCP x)?
Thanks!

Final Cut Studio 7 and Mac Pro RAID recommendations

I have a Mac Pro (early 2008) with 4 x 750gb SATA drives and 1 Promise DS4600 eSATA, decked out with 4 x 1TB 7200 RPM drives.
I am considering the following setup for the disks. I am trying to make sure there is enough redundancy in the setup to survive a hard drive failure and enough performance to satisfy edit and uncompressed HD capture needs over a BlackMagic Intensity card (120mb/s required):
1 x 750gb RAID1 System Drive - Macintosh HD (internal drives 1 & 2), block size 32kb
1 x 750gb RAID1 for FCP Scratch - ScratchDisk (internal drives 3 & 4), block size 128kb
1 x 2tb RAID10 for FCP capture - FCP Capture (Promise DS4600), block size 128kb over eSATA
…purchase something for Time Machine backup or use CCC (external firewire800)
Anything I've missed or anything I should or should not do? Thanks for the input.

I know of audio folks that use mirror for live recording and editing, yes, but there they need multiple drives and to spread out their tracks and libraries and plug-ins, not HD video.
There are excellent RAID6 card setups that make sense. And stick with quality drives.
Audio high-end anyway use to mean SCSI and FibreChannel.
So yes, move project files to RAID6 would be a good move. And do 'torture' the drives to death - BEFORE they are used - for like a week at least, to work and break them in and iron out any bugs.
Use Enterprise RAID Enabled drives, stay off bleeding edge and use safe trusted and reliable equipment (drives, controller, software). One of the real "killers" is if you need new hardware, are forced into an OS that hasn't had a year of testing and your applications usually take 6-12 months (or more) to really be certified.
There aren't a lot of RAID6 controllers, but there are some, and some SAS/SATA.

Problem Installing Final Cut Studio

I am trying to load Final Cut Studio on my Mac Pro Tower and it told me that i need to have an Intel processor. How do I fix this problem?

Understand that running the final cut apps on a g5 is not supported. The PPC architecture of the G5 is quite different than that of an intel machine.
x

Re installing Final Cut Studio on my NEW Mac pro?

I originally purchased Final Cut Studio (on a G5 Power PC), Then installed the universal crossgrade,
then installed Final Cut Studio 2. Now I have a New Mac Pro (Intel Chips) How do I go about
reinstalling FCS? do I need the original serial key from the first version or do I just use my
FCS 2 serial Key?
J>H<L

J>H<L
You'll need both keys, but you only have to do one installation.
The FCS2 installer will ask for the FCS2 key. If that passes, another window will open asking for the FCS key. If that key passes, then it's just a normal installation.

What do I need to do to install Final Cut Studio version 2 on a new Mac Book Pro

What do I need to do to install Final Cut Studio version 2 on a new Mac Book Pro that does not support power PC anymore

You need to install Rosetta from a OSX 10.6 install disk.
FCS2 is intel native, it is only the installer that requires PPC support.
x

How can I install Final Cut Studio 2 on my new MacBook Pro with Lion?

I just purchased and received a new 15" MacBook Pro (non-retina) last week. I need to install Final Cut Studio 2 on this computer. I have researched this and found that I need to install Rosetta from the Snow Leopard DVD in order to do this. This is the first Mac I've bought ( although I've been working with them for years), so I don't have a Snow Leopard DVD. I am a high school teacher and we use FCS 2 for my classes so buying FCP X is not a viable option for me since I teach FCP 6. The iMacs we use in school run Leopard and were never upgraded to Snow Leopard (budget cuts and all), so I can't even borrow one from my district.
Does anyone know how I can obtain Rosetta? Or another way to install this without it?
Thank you ! :)

There is no way to add Rosetta support because it is not supported by OS X Lion at system level. This has been documented before the release of OS X Lion by itself.
If you really need Final Cut Studio 2, I would return your computer if possible, and purchase a Mac that is capable of running Snow Leopard (all 2010 models, early 2011 MBP and some other 2011 models)

Problems installing Final Cut Studio on my new Macbook Pro

I just got my new 17 inch Macbook Pro, and am trying to install Final Cut Studio 3. It installed just fine, and accepted the serial number. The problem is that every time I open the application, I have to reenter the serial number. Once I do that, it runs fine, but the next time, I have to reenter the info again. Anyone have an idea of how to fix this?
Rob Krampf

do some searching here. I remember other people having this problem. You might also try repairing permissions on your startup drive, deleting your fcp preferences
https://discussions.apple.com/docs/DOC-2491
And creating a new account in system preferences: accounts.

Imac won't let me install Final cut studio 2..it will let me install the upgrade, but it has no live type and i need it to work on my current projects. How do I get Live type back installed in iMac

I just purchased an iMac for home and went to install final cut studio 2 and it gave me an error saying something about "PowerPC" not used or something like that. Installed the studio upgrade just fine...but it has no "Live Type" which I need to work on projects I have been using in my Mac Pro at my work place. How do I get "Live Type" to install in this iMac? Downloaded Live Type upgrade but that won't update cause there's no "Live Type" in the applications.

It sounds like you have Lion installed on your new imac, although your profile says SL 10.6.8 (you may want to change this.)
If you have the Snow Leopard install disc I believe you can install "Rosetta" from the extras folder which will then, if you have the original FCS2 discs , allow you to select and install Live Type and LIve Type content only from the custom install options.
I hope this will work for you.
DM

7 Hours to Install Final Cut Studio 2??

I just installed Final Cut studio 2 on my Brand New Mac Pro and it took 7 hours... I installed it on my other Mac Pro back in May and it maybe took maybe an hour. I was just going to ask and see if this was normal or if I should be concerned. I have also put a black magic card in the machine and run into some issues with that as well.
Thanks for any thoughts you may have.

Here's the trick you NEED to know.
Once you know how to do this you will never again need to waste an entire evening inserting DVD's.
1) Make disk images of all your DVD's using Disk Utility. Be sure to save them as DVD/CD Master in the Image Format dialogue box, with no compression added. Save all the disk images to an external drive if possible. Final Cut Pro users all have big external drives, but in a pinch this would work off an internal drive if you have the space.
2) Mount all of the DVD copies on your desktop, all of them at one time. This assumes you have ample memory, which if you are running Final Cut Pro you'd better have.
3) Start the install. Select your options. Then watch the magic as your Mac loads the DVD copies on your desktop until the process is done. It's that easy.
It takes a while to make the disk images, but once you have them saved to your external drive you can use them again when you get a new machine or need to reinstall for any reason. This works with Logic Studio as well as the Adobe suites- I've used this process for years. In the old days we used this process for floppies; works just as well with CD's and DVD's. Once you try it you will be dedicating an external drive to software installer disk images.
Cool, or what?
Message was edited by: bigwheel

Cannot install Final Cut Studio on new Mac Pro

Similar Messages

Maybe you are looking for