Cannot install fully LabVIEW 2010 on WinXP SP3

Hello,
I have tried numerous time today to install the NI Developer Suite 2010 using install discs. I have catalogged all of the items that did not install. LV 2010 does work but I am not sure if everything works. Here are the items and the order in which I was not able to install them:
"Critical Issues when using National instruments Drivers with Microsoft Visual Studio.NET 2010 resolved by NI-PAL 2.6.5" - I successfully installed this but the message always comes up and gives me a "Are you sure you want to proceed" type message when I try to keep installing
"NI-USI 1.8.0" did not install.Error 1935
"NI-LabVIEW Runtime Engine Interop 2010" Error 1935
"NI AFW UI Assemblies" Error 1935
"NI Measurement Studio 8.6 Enterprise Runtime for VS2005" Error 1935
"NI AFW Channel Configuration Tool" Error 1935
"NI AFW Custom UI Assemblies" Error 1935
"NI LabWindows/CVI 2009 Service Pack 1 Runtime Engine" - No error number
Any idea if I need these applications to run LV 2010?
Thanks.
Solved!
Go to Solution.

It sounds like there may be something strange going on with your .NET framework that is causing this driver conflict. Try uninstalling your current .NET framework as well as LabVIEW (from add/remove programs) and re-installing from the Microsoft .NET Framework page followed by a fresh LabVIEW install.
A couple other things to note:
Make sure that you have all of your anti-virus software/ firewalls turned off while trying to install LabVIEW. We've seen this install error caused by that before.
Also, make sure that you're installing your drivers after your LabVIEW installation.
Regards,
Austin S.
National Instruments
Academic Field Engineer

Similar Messages

Cannot install windows xp home edition w/sp3 into my mac pro mac os 10.6.2

cannot install windows xp home edition w/sp3 into my mac pro mac os 10.6.2. I followed the instructions step by step but it does let me install if fully when asks me to fully install it says it cannot where to install.

Hi,
how much diskspace did you assign to the Windows partition ?
And did you do the reformating of the WIndows partition as described on pages 8-10 of the BootCamp Installation Guide ?
In your first post you mentioned 'fully install' twice. Any chance that the XP disc you use is an Upgrade disc and not a full retail/OEM one ?
Check with the label on the disc because such XP upgrade disc are not useable with BootCamp.
Regards
Stefan

Installing LabPython LabView 2010

Has anyone successfully installed LabPython on LabView 2010?
I attempted to install the .ogp package using VI Package Manager, and ran into a missing dependency
ogrsc_dynamicpalette >= 2.0.
I followed the example on,
http://forums.openg.org/index.php?showtopic=1121
editing the .ogp package to change the 2.0 to 0.1, as indicated.
However, upon installation, the VI Package Manager claims that the package is not compatible with the current LabView version.
Solved!
Go to Solution.

Shultz,
I read your posts in that other thread, but still don't understand how you solved the problem (I'm having the same one).
How exactly did you " install orgs_dynamicpalette using VIPM"? Is there a separate package you have to install just for that?
A quick google hasn't found one.
Some people have suggested unzipping the .ogp, editing spec to say >=0.1 on the orgs_dynamicpalette line, rather than
2.0 and then re-zipping the folder and saving as an .ogp. For them it seems to work, but for me VIPM complains that the
result isn't compatible with anything at all.
LabVIEW 2013, Windows 7
He who asks the question is a fool for five minutes; he who does not ask the question remains a fool forever.

Cannot install iTunes 11.4 on xp sp3, no error messages

I couldn't install the latest iTunes on xp sp3 laptop. Installation went fine and no error message, but iTunes is not installed while Bonjour and other components are installed. There is no iTunes folder in program files. This is baffling. Does anyone know how to solve this? Thanks.

Hello ffayyca,
Thanks for using Apple Support Communities.
I'd like you to please uninstall iTunes and all of its components, and then do a fresh install.
Removing and Reinstalling iTunes and other software components for Windows XP
http://support.apple.com/kb/ht1925
Download iTunes
http://www.apple.com/itunes/download/
Take care,
Alex H.

Cannot change Radix Labview 2010

Good Afternoon,
I'm trying to change the radix of an integer constant to Hex display in LabView 2010, as discussed in this post:
http://forums.ni.com/t5/LabVIEW/How-can-I-create-a-hexadecimal-constant-in-LabVIEW/td-p/1008715
However, in the right click context menu I do not see a "Hex" option.
I was able to copy/paste the integer from the forum posted VI and use it in my application, but I Need to know how to change the display to Hexadecimal
And I don't want to use a HEX string to integer conversion, I should be able to input a hex number directly into a numeric constant just like in C
Thank you,

In the menu you have to go to Display Format to change the radix. Then you have to go to Appearance to show the radix. This last step should be easier.
http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Make-it-easier-to-show-the-radix-when-you-change-it/id...

Cannot install Microsoft Office 2010

Hello everyone,
During the last week I was trying to re-install Microsoft Office 2010 Professional without result. I was previously unistall Microsoft office 2010 with success and when I tried to installed it again a probelm occured. I run the .exe file, it started
installing the application but when the processing bar became full a message appeared saying that "A problem occured and the Microsoft Office couldnt installed". It didnt specified what exactly was the problem. I did this mutiple of times without
result. Can anybody knows why this happened ? Is there any solution? In the past I didnt have such a problem with the installation of Office.
Thanks
Maria

I found these errors (I hope to be helpful)
Error: OptionDependency: Indirect dependencies are not supported. Option WISPHidden has a lead WISPFiles which also has 1 leads.
Error: Failed to install product: C:\MSOCache\All Users\{91140000-0011-0000-1000-0000000FF1CE}-C\ProPlusrWW.msi ErrorCode: 1603(0x643).
Rolling back package: ProPlusrWW
There appears to be no rollback work to do for package: ProPlusrWW path: C:\MSOCache\All Users\{91140000-0011-0000-1000-0000000FF1CE}-C\ProPlusrWW.msi
Rolling back package: Office32WW
Package Office32WW was installed in the chain... uninstalling as part of chain rollback...
Successfully rolled back install of package: Office32WW path:C:\MSOCache\All Users\{91140000-0011-0000-1000-0000000FF1CE}-C\Office32WW.msi
Rolling back package: WordMUI.en-us
Package WordMUI.en-us was installed in the chain... uninstalling as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Install Rollback (uninstall)...
Package: WordMUI.en-us
Stopping running ose
SystemRestore : Attempting to cancelling System-Restore-Point for Product [Microsoft Office Professional 2010] (with RestorePointType [0, Installed]).
SystemRestore : Successfully cancelled System-Restore-Point for Product [Microsoft Office Professional 2010] (with RestorePointType [0, Installed]).
Thanks
Maria

I cannot install newest Adobe Flash on WinXP... please HELP???

Here's the freagin' deal. Simply put...
I need the newest version of Adobe Flash (10.1 I think?) to be able to run Media Go (which I've been running for a long time w/ no problems) so that I can access my account on the PSN to then be able to transfer games (among many many other things) onto my PSP.
As I stated above, I've been running the Media Go program on my cpu for a long time now with no issues whatsoever. But now, Media Go recently asked/required me to download the newest Adobe FLash player in order to simply be able to start up Media Go at the very least.
Then, when I go to download the newest Flash, it comes up with an error message that I've also seen a lot of others run into... "the ActiveX control for Adobe Flash Player could not be registered" ... bla bla bla ...
And oddly enough, this only when I download and install using the Internet Explorer 8 browser. If I use my Google Chrome browser, it says that I don't need to install it because apparently it is already there and already up to date?!
So, after sitting and thinking for a bit, I then tried everything under the sun to help me, including going through pretty much every trouble-shooting step process provided by this very website.
I've tried downloading the newer beta
-checking to see if I have admin permission
-checking my Internet Explorer version, which says, "Cypher strength: 128 bit," despite it saying I have to have the 32 bit version???
-uninstalling the old version
- etc. etc. etc. etc. etc. etc.
I do have Windows XP Media Center Edition, and that might a/the the problem... but I'm not sure? I basically went through all of the trouble-shooting requirements, checking to make sure my cpu matches what the requirements say that I have to have in order for Adobe Flash Player 10.1 to run/download/install.
To be completely honest, my current knowledge of computers isn't that great at all (I'm horrible... it's pretty bad). I really don't know how to do a lot of things without having instructions in front of me... and even then I still screw up. In turn, I am all out of options! I really need help! And I really REALLY need to be able to run Media Go so that I can access all 100 or so of my PSN downloaded games. Because without being able to run Media Go, my games are essentially impossible for me to access... and that's a lot of my money that I'm not using and or taking advantage of (although I guess I can still try using my friend's CPU ??)! There are even quite a few new games I've recently downloaded that I haven't transfered to my PS yet... new games I can't get at and therefore cannot play!
Anyways, you get the gist. Sorry for my rambling... I'm just extremely frustrated due to the fact that this should be a very simple and easy process that usually takes what, all but a few minutes to update?!?!
Can anyone with the knowledge and know-how (way WAY far beyond what I know) lead me to success, or at the very least send me on the right path? Thanx to anyone in advance willing to try to help me. I can easily state that I will indeed greatly appreciate it!!

sofaking1180 wrote:
I really don't know how to do a lot of things without having instructions in front of me...
Here are the instructions to fix your registry permission problem: http://kb2.adobe.com/cps/494/cpsid_49419.html

Cannot install exchange server 2010 without small business server 2011

we purchased Windows Small Business server 2011 for one of our servers and installed the software and setup exchange server for the office. We had some 3rd party software that would not work with small business server so we had to install windows
2008 r2 server. we still need exchange server 2010. Is there anyway to install without small business server? When I entered the key in exchange server for the small business server it is saying that it is an invalid key. We have a
genuine version of windows small business server. is it all or nothing for the software. Thanks

SBS is indeed all or nothing. Breaking apart the individual components is not allowed. That includes exchange. If you want exchange without SBS, you'll need to buy exchange separately and exchange CALs. If you only have SBS CALs and aren't going to run
SBS, you'll need Windows CALs as well.

Satellite P100-429 - cannot install display drivers for Win XP SP3

Hi,
i have Toshiba p100 429 laptop, installed with win xp professional sp3. I'am unable to change screen resolution from 640 by 480.
Actually i tried to download display driver from toshiba site but after installing driver it give blue screen with error message NV4_mini.sys error.
After this i can not even start my laptop.
I am presently using external monitor ( sync master B2230). I have also tried to download drivers from Nvidia website but that does not work either.
Resolution on my screen is still low. thanks for your help

Have you tried to install THIS driver?

Cannot install BC 2.1 on WinXP (Portuguese/Brazil)

Hello,
I have an iMac 24' / Core2Extreme 2.8Ghz / 2Gb. RAM with Windows XP (Portuguese/Brazilian version).
After trying to put regional settings in English, BC 2.1 installer keeps unloading automatically.
Any solution for this case?
Thanks,
Ricardo

Hello,
I have an iMac 24' / Core2Extreme 2.8Ghz / 2Gb. RAM with Windows XP (Portuguese/Brazilian version).
After trying to put regional settings in English, BC 2.1 installer keeps unloading automatically.
Any solution for this case?
Thanks,
Ricardo

Labview 2010 run-time engine silent install

I am having trouble with installing the run-time engine for LabVIEW 2010 with the silent option.
I am using the minimum version of the run-time engine.
Before I used the LV7 run-time engine. Then I could install it silently using LVRunTimeEng.exe /qb!
In LabVIEW 2010 the run-time engine is no longer a single file but a directory that contains the installation files. There are two files that can be used to launch the installer Setup.exe and LV2010runtime.msi.
Setup.exe does not seem to accept any command-line arguments. LV2010runtime.msi however accepts the command-line arguments and can be installed silently.
Now my problem is that I am building a windows installer using a third party application and it is only possible to launch exe files after the installation completes. Before I could launch the LVRunTimeEng.exe /qb! to install the labview 7 run-time engine but now when I have upgraded to labview 2010 I cannot do the same for Setup.exe.
My question is if it is possible to use the Setup.exe file to install the Labview 2010 run-time engine (minumum) silently?

Setup.exe runs a number of other .exe files during its execution. This article looks like it will allow you to run setup.exe silently by supressing all messages and windows:
http://digital.ni.com/public.nsf/allkb/878FC4C374013ADF8625733D00688F67

Labview 2010 randomly restarts computer - windows event viewer points to nap agent

When running my current VI that I am working on, the computer will ranomly reboot. There is no freeze, or blue screen, just a reboot. When examining the windows event viewer after the reboot, the following warning is listed immediately preceding the reboot:
Event ID 39
The Network Access Protection Agent was unable to determine which HRAs to request a health certificate from.
A network change or if GP is configured, a configuration change will prompt further attempts to acquire a health certificate. Otherwise no further attempts will be made.
Contact the HRA administrator for more information.
Previous to getting this warning before a reboot, I was getting the following error:
Event ID 10016
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{24FF4FDC-1D9F-4195-8C79-0DA39248FF48}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18). This security permission can be modified using the Component Services administrative tool.
This is a DCOM service eror and the CLSID is referring to NAPAGENT. So I configured DCOM to allow the NAPAGENT to start and now I get the Event ID 39 warning and still get the reboot.
I am not sure why labview is even asking for DCOM or NAPAGENT to start at all. My VI is simply reading information from two serial instruments.
This reboot behavior does not occur when the computer is not running labview.
I am attaching a copy of the main VI, if it will be helpful I can post the sub VI's as well.
Thanks in advance for your help.
-Justin Lee
Attachments:
testscan10.8.vi ‏179 KB

Hi Joe,
Thanks for the reply.
I am running windows XP pro service pack 3.
I am running a standard instal of labview 2010 with the latest VISA drivers, no other modules or options installed.
I am only reading and writing to the serial ports (com) in my code. I don't believe that virus/spyware/malware is to blame for several reasons.
1. This only occurs when running this VI in labview.
2. I have replicated this problem on another computer.
3. I am behind a government (DOE) firewall and virus scans and checks are performed constantly.
4. If I take out the serial portion of my code via a T/F case structure, it will not crash.
The code will run fine for sevetral hours sometimes and then crash, other times it will crash after only a few minutes.
Please let me know what other information you require.
Thanks!
Justin Lee

LabView 2010 - CVI Driver Import Wizard

I have previously downloaded and used the driver import wizard to create LabView VIs from a CVI driver. Specifically with Labview 8.x and 2009.
However the latest version of the wizard (v1.3) will not install with LabView 2010 and there isn't a newer one to download w- So the question is, does anyone know if there is an intention to update this wizard so I can use it with LV 2010 ?
Thanks

Hi,
I am having the same problem. Please let me know if this has been resolved yet.
I tried copying the following directories to labview 2010:
from     C:\Program Files\National Instruments\LabVIEW 2009\resource\CVIFpConv
to          C:\Program Files\National Instruments\LabVIEW 2010\resource\CVIFpConv
and
from     C:\Program Files\National Instruments\LabVIEW 2009\project\_DriverCtoLV
to         C:\Program Files\National Instruments\LabVIEW 2010\project\_DriverCtoLV
and the wizard loads and runs until I specify a .fp file and then I get the error in the jpeg attached. When I try to open the block diagram (FC_RFL_Initialize.vi), it says you need a password to view it, so that stops my debugging.
Attachments:
Error using Instrument Driver Import Wizard in LabView 2010.JPG ‏88 KB

LabVIEW 2010 will not install on Win XP SP3

I have made several attempts to install LabVIEW 2010 on Win XP SP3. I already have LabVIEW 2009 installed and working.
For each attempt I accept the default install options and do not put in a serial number. The first attempt got stuck at 2% complete and did not change for 30 minutes. No error messages. I cancelled the install and tried the install again from setup.exe.
The next two attempts stall at 0% blinking forever. The 4th attempt made it to 18% before it stalled for more than 30 minutes. The next two attempts stalled at 0% repeating and would not cancel. I had to terminate them with Task Manager.
Why won't LabVIEW 2010 install without stalling before than 30 minutes? Why does it not spit out an error message instead of just stalling? How do I know why it won't install? How do I fix it?
Solved!
Go to Solution.

I had the same problem. The 2010 install was very slow on my XP SP3 PC. I do not why, but it took very very long time to get past 2% of the setup. But then the install process speeded up. So just let the computer take the time that is needed. It will eventually install. I used the trail version download from NI
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

LabVIEW 2010 thinks it is already installed thus preventing me from installing it

I had 2010 installed before, then a terrible problem with file corruption damaged the installation and now I need to reinstall it.
Problem is that no NI installs appear on 'Add/Remove programs' so I cannot 'repair' or 'remove'. Also when I install from the DVD it thinks 2010 is already installed and just shows 'Currently installing LabVIEW 2010 (English) for a second' and then reports 'No software installed or removed'.
I've even tried deleting the National Instruments folder from Program Files but this did not help.
Any ideas on how I can force a reinstall - maybe I need to modify something in the registry?

All NI Software is listed as a single entry called 'National Instruments' in the add/remove programs.
If that is not available, I would try to run msiblast (see here)
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Cannot install fully LabVIEW 2010 on WinXP SP3

Similar Messages

Maybe you are looking for