Cannot install in Windows 7 RC, plz help

just downloaded windows 7 RC, ran itunessetup as administrator, hard disk worked for several seconds but no more response.
do i need to change something in the registry?
plz help!

8.1.1 runs fine on Windows 7RC1 for me as it did on the Beta version .
Is the Win 7 a clean install if not that will be the problem ( I suspect )
Did you set up as Vista compatibility as well as installing as Administrator

Similar Messages

My ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...

my ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

HT201077 photos not getting added up in my photostream. It's showing some kinda registry error in my windows. Plz help

photos not getting added up to my photostream. It's showing some kinda registry error in my windows. Plz help!!

Hi Melissa_C!
I have an article for you that may help shed light on this circumstance:
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/ht4486
How long are My Photo Stream photos stored in iCloud?
The photos you upload to My Photo Stream are stored in iCloud for 30 days to give your devices plenty of time to connect and download them.
How many photos are stored in My Photo Stream on my devices and computers?
iCloud pushes all your photos to the My Photo Stream album on your devices and computers, and manages them efficiently, so you don’t run out of storage space.
Your iOS devices keep a rolling collection of your last 1000 photos in the My Photo Stream album. From there, you can browse your recent photos or move the ones you like to your Camera Roll or another album to keep them on your device forever.
Because your Mac and PC have more storage than your iOS devices, you can choose to have all of your My Photo Stream photos automatically downloaded. In iPhoto or Aperture preferences on your Mac, select Photos (or Photo Stream) > My Photo Stream > Automatic Import. All of your photo stream photos will be imported into your Events, Projects, Photos, Faces, and Places folders in iPhoto or Aperture. On your PC with My Photo Stream enabled in the Control Panel, all of your photos will be imported into C:\\Users\<user name>\Pictures\iCloud Photos\My Photo Stream. For iCloud Control Panel 2.0 to 2.1.2 users, the path isC:\\Users\<user name>\Pictures\Photo Stream\My Photo Stream .
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Cannot Install iTunes Windows 8 after Uninstall

I have a Windows 8 machine with all the updates, and a couple months ago iTunes stopped updating. It was running, but it just would not update. I decided to re-install it, and now I get the error below. I have used Revo Uninstaller to remove every little bit of Apple iWare (including Quicktime and Bonjour), registry keys, and traces, but still cannot install it. Please help, I have searched for weeks through the internet and have tried everything I can trying fix this problem.
Error getting file security:
C:\ProgramData\34BE82C4-E596-4e99-A191-52C6199EBF69]GetLAstError: 5
Thank you!

August 2nd 2013 and still no response from Apple huh? They aren't going to get any further business from me then... this is ridiculous!!!!!!!

Unisphere Host Agent cannot install on Windows 2012 R2 Core

Cannot install EMC Unisphere Host Agent on Windows Server 2012 R2 Core server.
When trying to install into Hyper-V 2012 R2 I get an error informing of the requirement for Feb 2013 updates to Windows 8 and Windows server 2012.

Cannot install EMC Unisphere Host Agent on Windows Server 2012 R2 Core server.
When trying to install into Hyper-V 2012 R2 I get an error informing of the requirement for Feb 2013
updates to Windows 8 and Windows server 2012.

Cannot install crystal report server - please help

hello users,
i cannot install the server application. i put the dvd in the drive and choose german install and directly cames an error.
"Fehler bei der Übernahme der Transformationspakete. Stellen Sie sicher, dass die Transformationspfade gültig sind."
in english nearly:
"error by assumption of transformationpacket. make sure, that the transformationpath are validly"
sorry for my english but i am a long-established german

Hello Marcus,
I believe this is an 'error applying transforms' type of error.
Running the MSI installer from command line should typically resolves the problem.
From the cmd line, at the root of the CD drive, type:
msiexec.exe /i win32\businessobjects.msi TRANSFORMS=:1031
Please note that the 1031 indicates German. 1033 indicates English.
There is more information in the following SAP Note:
1202481 - Error Applying Transforms - Verify that the specified transform paths are valid.
Thanks.
Srinivas

Palm Treo 700p Cannot install. Windows Vista looking for Drivers

Installed Palm software and synced on my Dell with no issues.
Went to install on 2nd PC with Windows Vista Home. Issues. Got new download for Vista 32 and downloaded off site.
Same error puts me in a circle. System finds new hardware. Looks to install driver. Can't find Drive on CD or Hardrive and so keeps in loop. Cannot finish 1st "sync" without driver so install does not complete.
Please advise:
Can I use the Palm device on two seperate PC's (One on NT running fine..now adding Vista Home).
How do I get the drive installed?
How do I be sure NOT to overwrite the data on the Palm when I sync the 1st time on the 2nd pc.
Thanks
Post relates to: Treo 700p (Verizon)

Hello jpmill2 and welcome to the Palm forums.
1. Please make sure that your Windows Vista account is a member of the Administrators group. I would also be sure to check that antivirus software is disabled during the install process.
2. You can use the Treo 700p with more than one computer. I sync my Treo with my office PC running Windows XP SP2 and my Vista Business SP1 machine at home. (And a Mac, just for good measure.)
3. The USB driver for the Treo 700p is obtained by installing Palm Desktop 4.2 (bundled on the Treo 700p software disc) or by installing Palm Desktop 6.2 by ACCESS for Windows [Vista]. You should install the software first, and then connect the Treo after the install is complete. If prompted to HotSync during the install, I aways Skip it.
4. If you Skip the HotSync during the Palm Desktop isntall, you can create a new HotSync ID on the computer with the same name as the HotSync ID on your Treo. Then set the conduits to Handheld overwrites Desktop and then sync.
Hope that helps,
Alan G
Post relates to: Treo 755p (Sprint)

Cannot install iTunes, Windows 7; error 7

I downloaded the last iTunes update and since then, have not been able to open iTunes. I have followed the instructions from the community posts about uninstalling iTunes and all the ancillary programs several times and still cannot open iTunes. Each time I reinstall, I get an error message about the Apple Mobile Device Support and the install stalls. I cannot get past it. If I hit ignore and let the install finish, I end up with error message iTunes not installed correctly, please reinstall Error 7.
I run Windows 7 on a Toshiba Satellite laptop. All of my Windows updates are current.
Please help. I can't back up my iPhone b/c my settings are for backup on computer. I cannot backup on cloud b/c of this. Because I cannot backup, I have updated my software on the phone yet.
In backup/upgrade limbo.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Cannot install on Windows 7 setup.exe freezes.

Hi I am trying to install Adobe Creative Suite 4 Master Collection from a DVD by running the setup.exe however, it freezes at around 90% and I cannot continue any farther. I have tried copying the dvd to my hard drive and that gives me the same result. It also did the same thing when I had XP SP3 and I never found a solution. I really need to get this installed so I can finsh a clients site so any help is aprieciated.

Hi again (for the last time),
I must stress the most annoying thing about it is the fact that Adobe clearly lies in stating that ( in my case CS3) should work on Windows 7. In the article: http://kb2.adobe.com/cps/508/cpsid_50853.html on the website there is a claim CS3 has been tested on Windows 7 and should work.....
"In the article `Support policy for Acrobat 7 and 8 on Windows Vista...` no other conclusion is possible. In his answer Bob Levine admitted that Adobe 7 and 8 are supported in Vista.
And of course we can fight about the number of applications working well in Vista but not in Windows 7 and that (quoting Bob:) ´some` applications from C3 work fine in Windos 7.
Later on, there is a statement I recieved by mail that declares the opposite:
***Notes to Customer***
11/09/200908:36:02
Dear -------,
Thank you for contacting us through Adobe Web Email Support. This
response addresses your request about acrobat 8.0 on windows 7.
Unfortunately only Acrobat/Reader 9.2 will be fully supported on
Windows 7.
All previous versions will not be supported on this platform.
Thank you,
***Notes
But that doesn´t make sense in the light of the promises Adobe makes about CS3 in Windows 7 on its website.
So my complaint is still the same... don't lie on internet about things you must later take back for the sake of commerce. I personally made my decision to upgrade (from XP) to Windows 7 partly because I should still be able to use CS3 (including Acrobat 8).
Adobe is highly (probably even more than Microsoft) arrogant to users who bought their expensive products..
Tom

Hp D330.audio driver installed but no voice.plz help.

hi
i hav hp d330, X86 based PC with O.S wp pro.sp2.
i installed bios update , networkind [lan card] drivers and they worked fine.
I also download n installed Soundmax drivers one by one from
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=342068&p...
but even after installed correctly [also showing "soundMAX integrated digital audio" in device manager] no voice heard by headphones[i dont hav speakers].
head ph is correct n working fine on tv. i hav checked all basic stuff "mute " etc. but still no vice.
plz give some advice.
Thanks a lot.

First right-click on sound icon in systray(lower right in area where the clock is) then open mixer and check to see that the mute all box does not have a check mark in it, If it does select it to remove the check mark and adjust the volume. Try something that produces sound.
Second(if mute was not checked) Go to Conrol Panel --> Sound --> next to the audio icon there should (in parentheses) be the name of your onboard sound chipset device. in volume, mute should not be checked. Go to Audio tab (select at top) and in standard sound device your chipset audio device should be selected as the standard output devive and not greyed out. You should see the same in recording device. In Speech tab you should also see your chipset device selected for both.
Please post what you found and your results.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Error while installing BI Publisher Desktop - Plz Help

Hi all,
Getting following error while trying to install Oracle BI Publisher desktop
Template Builder Installer failed: Unexpected Error
-> I've downloaded "BI Publisher Desktop 10.1.3.4.2 for Windows" software from the following link
http://www.oracle.com/technetwork/middleware/bi-publisher/downloads/index.html
-> OS: Windows 7 Enterprise (64-bit)
-> Microsoft Office Professional Plus 2010
-> I googled for answers, but none of the suggestions i found were working.
Please help..
Regards,
Srini

>
-> OS: Windows 7 Enterprise (64-bit)
-> Microsoft Office Professional Plus 2010
>
why not BI Publisher Desktop > 11
say BI Publisher Desktop 11.1.1.5.0
for BI Publisher Desktop 10.1.3.4.2 see System Requirements for BI Publisher Desktop Tools http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12690/T434820T487781.htm
>
Client Operating System
Windows 2000
Windows 2003 SP1 (32-bit only)
Windows XP SP2 and later
Windows Vista
>
so win7 may be rise an error because it's "Unexpected Error" :)

HP LaserJet Pro 200 Color MFP M276nw: cannot install on Windows XP Professional 64-bit

Hi all,
I am trying to install (via USB) the printing driver for my HP LaserJet Pro 200 Color MFP M276nw printer, but my operating system is Windows XP Professional 64-bit, Service Pack 2. The installer stops with an error saying that the system is not supported. Are there any basic drivers available to fix this problem, or do I necessarily need to upgrade my OS?
Thank you,
Alessio

XP 64-bit is not supported. (see system requirements)
Now is a good time to consider a O/S upgrade because of the end of life come April/2014 for Windows XP.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Cannot install clean Windows 7 64-bit to GPT partition

ASUS Maximus VII Formula
HGST 4TB Deskstar NAS, SATA 3 (6 Gb/s), 7200 RPM, 64 MB
Microsoft Volume Licensing Service Center (VLSC)
Windows 7 Pro 64-bit SP1
SW_DVD5_Win_Pro_7w_SP1_64BIT_English_-2_MLF_X17-59279.ISO
Procedure
On a Windows 7 Pro 32-bit BIOS laptop, I used Disk Management snapin to initialize the virgin 4TB disc to GPT. In Properties, it said it was a GPT disc. I then created a 1.0 TB partition with Quick Format unchecked (equivalent to DISKPART > clean)
so it would check for bad sectors.
I placed the 4TB disc into the ASUS Maximus VII Formula computer.
I made sure the UEFI BIOS was set to only use UEFI mode.
I booted into the Window 7 Pro 64-bit SP1 dvd.
During boot, ASUS screen said it was in UEFI mode.
Windows installer loaded properly.
On the Windows screen for selecting which partition to install the OS to, I selected the 1.0 TB partition. The following error occurred:
"Windows cannot be installed to this disk. The selected disk is of the GPT partition style."
Since the ASUS boot screen said I was in UEFI mode, why does it not let me install Windows to my 1 TB GPT partition?
I then deleted the 1.0 TB partition.
The partition was deleted leaving unallocated space.
I used NEW link to create a partition.
NEW did not work, it just left the unallocated space and did not create a partition.
Since the ASUS boot screen said I was in UEFI mode, why does it not create a GPT partition?
From the ASUS driver downloads page, I also tried loading the
"Intel_RAID_Win7-8-8-1_V13101058" 64-bit drivers during the installation process with no success.
Thanks in advance.

Hi,
How about your problem now? Based on my knowledge, Windows 7 X64 system is support GPT disk, but Windows 7 X32 system not. According to your description, your disk should be already GPT, this problem probably caused by Windows installation disk problem or
motherboard UEFI boot settings mistake.
Therefore, please check these two points for test. If problem persists, in my opinion, it would be better to contact ASUS suppoort for further assistance with this problem.
Roger Lu
TechNet Community Support

Cannot delete itunes .msi not found and cannot install new one! please help

Please help me awhile ago i tried deleting then reinstalling th new version of itunes / quick time and after going through most of the installation process this comes up:
The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below.
Use source:
C:\Documents and Settings\Jordan\Local Settings\Application Data\Apple\Apple Software Update\
I made a picture of it here:http://i196.photobucket.com/albums/aa233/djjordie/cannotfindmsi.jpg
Then i tried uninstalling it (somehow it says its installed in add or remove programs) and the same message came up.
After ages of trying to figure it out and deleting heaps of things, when trying to install now it says:
1.run or cancel (thats not the problem) i click run picture here:http://i196.photobucket.com/albums/aa233/djjordie/cannotfindmsi.jpg
2.then it goes to this picture here:http://i196.photobucket.com/albums/aa233/djjordie/preparingtoinstall.jpg
3. then straight to this picture here:http://i196.photobucket.com/albums/aa233/djjordie/preparingtoinstall.jpg
without the the rest of the installation process...
SO i need to be able to delete it complety (the problem there is the .msi not being found).
Then install itunes / quick time without the .msi problem or the skipping of the installation process with it saying errors occurred ect...
Please help it would be much appreciated!
DJJORDIE

WHen you get trouble with msi files you usually need the Microsoft Installer cleanup utility.
Here is a method for removal of iTunes and related programs with clean up and reinstall.
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program. The installer doesn't give any message to confirm the installation.
http://support.microsoft.com/kb/290301/
(To run the program – All Programs>>Windows Install)
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes.

Cannot install on windows 7

How can I install pc suite on windows 7. When i try troubleshoot compability it says installer has stopped working.
http://djehx.webs.com

I still have not tried to install PC Suite on my Win7 (on a Virtual PC)... But since it's on my laptop and I'm not home now, I'll check tomorrow and write again...
Might have some problems with the driver installation... I hope we won't need to wait for 7.2
Ericsson T10i -> Nokia 7110 -> Siemens C45, C55, M55, M65 -> Nokia 6131, N73, N82 -> HTC Wildfire, Desire HD -> Nokia Lumia 800 -> HTC Desire X -> Lumia 820 -> Sony Xperia SP -> Lumia 925 + Sennheiser CX 500
If I've helped, use the Kudos button to thank

Cannot install in Windows 7 RC, plz help

Similar Messages

Maybe you are looking for