Cannot install iTune for Windows

Hi, I just bought an iPod nano and I tried to install iTune for windows 64 bit but I always get an error message concerning a Boujour service that it seems I don't have the rights to start.
Here are some of the installation events
Windows Installer a installé le produit. Nom du produit : iTunes. Version du produit : 9.2.1.5. Langue du produit : 1033. Fabricant : Apple Inc.. Réussite de l’installation ou état d’erreur : 1602.
Product: iTunes -- Installation failed.
Product: iTunes -- Service 'Bonjour Service' (Bonjour Service) failed to start. Verify that you have sufficient privileges to start system services.
La description de l’ID d’événement 100 dans la source Bonjour Service est introuvable. Le composant qui a déclenché cet événement n’est pas installé sur l’ordinateur local ou l’installation est endommagée. Vous pouvez installer ou réparer le composant sur l’ordinateur local.
Si l’événement provient d’un autre ordinateur, les informations d’affichage doivent être enregistrées avec l’événement.
Les informations suivantes étaient incluses avec l’événement :
WSARecvMsg failed (87)
La ressource de message est présente mais le message ne se trouve pas dans la
table des chaînes ou des messages
What a waste of time and money
I hope you have a solution cause this device is completely useless without that software.
Thank you

In my case, netlimiter was conflicting with the bonjour service. Probably identifying it as a threat. Uninstalling netlimiter solved my installation problem but now I need an alternative to netlimiter

Similar Messages

  • Cannot install itunes for windows 7 (64), repeatedly get "Roll back" and told to reinstall, but this does not work.  Tried the latest ITunes 11 for 64.  Same problem.   I have an ipad which works OK.  HELP

    Unable to use iTunes for about a month on my PC
    Have PC with windows 7 (64)
    Own an iPad2, which is working with no problems
    When I try to install iTunes it repeatedly fails via "Roll back"  Tells me to reinstall, which does not work.
    Tried latest update iTunes 11, same problem
    Prepared to uninstall iTunes and start all over again, but how do I do this?

    hi mate i think i may have just solved this for you. had the same problem as you, i uninstalled all apple products and quicktime and safari, did a disk clean up and deleted old restore points(might not need to but did it anyway) downloaded itunes from explorer and managed to install the new itunes 11 wooohooooo hope this helps buddy

  • Why i cannot install itune on windows 8.1?some dll required for this installation?

    Thanks for your help.

    Although you're getting a different error message, try the procedure from the following user tip:
    "The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

  • I cannot install iTunes on Windows 7 I receive the Error 7 (Windows Error 193).

    I cannot install iTunes on Windows 7 I receive the Error 7 (Windows Error 193). 
    I have uninstalled and reinstalled a few times but with no luck.  Does anyone have another option?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the above steps haven't helped try installing:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for a 32-bit core program, similar to previous 64-bit releases of iTunes.
    Or roll back to:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    as appropriate.
    tt2

  • Cannot install iTunes on windows 7 64bit

    Okay, I like so many cannot install iTunes on Windows 7 64bit.
    Now Orginally I got a message saying something to the effect of:
    There was a problem with the install you do not have permission for something...
    Through some investigating my iTunes was being installed and removing all my permissions to view and/or modify files within that folder. Even if I was logged in as admin and installed as admin all the permissions would simply block me out.
    This kind of had a familar feeling as in the last few versions of iTunes I had to run as admin just to open it (this is really annoying by the way)
    So I searched the net and many people were saying to uninstall everything "Apple" and try again.  So I did that.  Now I have this new message:
    there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.
    And again I scoured the internet for a way to fix this.  I apparently am supposed to goto Control Pannel/Programs and Features and select Apple Software Update and select repair.  The problem is that no longer exists in my programs list since I removed it in the earlier step. iTunes still refuses to install spitting out the same error forever. I tried the Microsoft "fix it" tool which is supposed to remove the Apple Software Update incomplete uninstall (which is apparently the whole problem) but it doesn't show up in the list for "fixing".
    I am at a loss.  Why doesn't Apple fix this.  I cannot update my iPhone to the latest software in fear I may need to restore it. With no iTunes that is impossible.  I cannot change any of my music or do anything until this is resolved.  If/when iPhone 5 comes out I cannot get it either unless this issue is taken care of somhow.
    I searched for an installer for just the Apple Software Update program But it seems to not exist as a standalone thing (it would be useful if it were though). If it were perhaps I could install it again and then successfully remove/repair it and iTunes might install finally.
    Now I have had previous versions of iTunes working perfectly fine.  I do not recall which version I was using before I tried to update and fell into this abyss however.

    Yes b noir. I've tried running just "iTunes64.msi" from the command-line and while it didn't produce the same error "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender." it produced a different error in bold-type "iTunes Installer Completed" then "The installer encountered errors before iTunes could be configured...Errors occurred during installation. Your system has not been modified...Please run the installer again, or click Finish to exit". However, I discovered a wealth of options from the Windows Installer to try after typing "iTunes64.msi passive"...So I'll experiment some more when I have time.
    P.S. I'm becoming more convinced that Apple is putting new software out there to get it debugged which was a trick that MicroSoft always seemed to do:-)
    =============================
    Windows ® Installer. V 5.0.7601.17514
    msiexec /Option <Required Parameter> [Optional Parameter]
    Install Options
        </package | /i> <Product.msi>
            Installs or configures a product
        /a <Product.msi>
            Administrative install - Installs a product on the network
        /j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
            Advertises a product - m to all users, u to current user
        </uninstall | /x> <Product.msi | ProductCode>
            Uninstalls the product
    Display Options
        /quiet
            Quiet mode, no user interaction
        /passive
            Unattended mode - progress bar only
        /q[n|b|r|f]
            Sets user interface level
            n - No UI
            b - Basic UI
            r - Reduced UI
            f - Full UI (default)
        /help
            Help information
    Restart Options
        /norestart
            Do not restart after the installation is complete
        /promptrestart
            Prompts the user for restart if necessary
        /forcerestart
            Always restart the computer after installation
    Logging Options
        /l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
            i - Status messages
            w - Nonfatal warnings
            e - All error messages
            a - Start up of actions
            r - Action-specific records
            u - User requests
            c - Initial UI parameters
            m - Out-of-memory or fatal exit information
            o - Out-of-disk-space messages
            p - Terminal properties
            v - Verbose output
            x - Extra debugging information
            + - Append to existing log file
            ! - Flush each line to the log
            * - Log all information, except for v and x options
        /log <LogFile>
            Equivalent of /l* <LogFile>
    Update Options
        /update <Update1.msp>[;Update2.msp]
            Applies update(s)
        /uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
            Remove update(s) for a product
    Repair Options
        /f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
            Repairs a product
            p - only if file is missing
            o - if file is missing or an older version is installed (default)
            e - if file is missing or an equal or older version is installed
            d - if file is missing or a different version is installed
            c - if file is missing or checksum does not match the calculated value
            a - forces all files to be reinstalled
            u - all required user-specific registry entries (default)
            m - all required computer-specific registry entries (default)
            s - all existing shortcuts (default)
            v - runs from source and recaches local package
    Setting Public Properties
        [PROPERTY=PropertyValue]
    Consult the Windows ® Installer SDK for additional documentation on the
    command line syntax.
    Copyright © Microsoft Corporation. All rights reserved.
    Portions of this software are based in part on the work of the Indepe
    =================================

  • Cannot install itunes on windows v8.1 64 bit

    Cannot install iTunes on Windows v8.1 64 bit.

    The old blue iTunes worked fine on my pc, then along came the new red iTunes, which initially refused to install from an auto-update notification, saying it didn't have permission to access one of its own folders (self access to all its other folders was ok).
    I then tried a manual download and install as suggested by the auto-update failure dialogue and that was exactly the same - failed at the last hurdle and had to reset itself.
    I then tried download and install from iTunes site and this installed without problem, but the application will not open, neither from the desktop icon with user or admin rights, nor from a direct open or run as admin from the iTunes folder .exe file.
    I have tried a repair install and an aggressive uninstall to ensure any TSR components are purged followed by a clean install - no difference.
    My other pc is no problem and iTunes installed and runs on there fine, so it must be a configuration problem on this pc only.
    I disabled my antivirus and malware detection during the install and made an exception for iTunes, to no effect.
    When selecting the app I get a blue circle for a few seconds then nothing, no dialogue or notification of problems.
    Any suggestions welcomed.

  • I am unable to install itunes for windows 7

    I am unable to install itunes for windows 7.I want to import audio material to my iphon4s from my lap top

    rashin wrote:
    I am unable to install itunes for windows 7
    Why not?  Should we guess at the issue or do you plan to provide details so that others can offer suggestions/solutions?

  • HT1461 I have installed the Windows 8 on my MacBook using BootCamp, but I cannot install drivers for Windows now

    I have installed the Windows 8 on my MacBook using BootCamp already, but I cannot install drivers for Windows now: I've got only BootCamp 3 disk and it doesn't goo even if I start it using compatibility options. And my BootCamp on Mac didn't offer me to burn cd with drivers for windows as I saw in many instructions. How can I resolve the problem? Thanks a lot.

    Go back to Boot Camp: on the 2nd page you get this:
    Download the support software and as Windows is already installed uncheck the 2nd box.

  • I can't install itunes for windows get error message 5

    i can't install itunes for windows get error message 5

    I've been having the same issues for the past year and a half. I've spent 6-8months trying to figure it out. Went to various Itunes stores with pictures on my Iphone per each step so I could relay all information that I'd come across and the personnel were less than helpful, after conversations that would sometimes last an hour between myself, employees and managers they always came back to "simply uninstall then reinstall" when I told them for the thousanth time that I've done that multiple times and my errors are happening while trying to reinstall it they act stumped and say "well then I'm not sure, I'll give you a call if I figure it out" and disappear. I've been very disatisfied at the lack of support from Apple and if Android to piece together a reletively reliable phone I'd switch to them in a heartbeat. I'll follow this question incase someone can answer this, but I don't have much faith.
    BTW, wifey has Windows 7 running on the laptop and my phone syncs just fine to that and no trouble with itunes, just mine (desktop).

  • Cannot load itunes for windows

    I cannot load itunes for windows
    Can you help me?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Is anybody else experiencing crashes when installing iTunes for Windows?

    Is anybody else experiencing crashes when installing iTunes for Windows?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box (similar to those given above) are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • My iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

    my iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

    It won't pass 10.3.
    What does this mean?
    I figured it out. Thanks!!!
    What did you figure out? How about posting how you resolved it?

  • How to install itune for windows 7

    I have a problem install itune for windows 7. Please help.....
    After installing itume 10.2.2 64-bit, It prompt me "Apple Application Support" is require to download itune.
    Info:
    Model: Sony vaio
    Windows 7 Home Premium
    Rating: 3.2
    Processor: Intel(R) Core(TM) i3 CPU [email protected]
    Memory: 2.00GB
    System: 64-bit Operating System

    It prompt me "Apple Application Support" is require to download itune.
    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • HT1926 Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes I get error messages, "unable to locate component, AVFoundationCF.dll not found," then "Error 7 (Windows error 126)

    Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.

    Repair Apple Application Support.
    START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

  • I cannot install itunes on windows 8.1

    I cannot install itunes on my Toshiba Laptop with windows 8.1. I kept getting error 7. So i removed all of the itunes files from my computer, and did everything the install troubleshooting page suggested, but it still will not install, but now instead of error 7, I am getting error 2.

    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Maybe you are looking for

  • Touchpad permanently not working after resuming from suspend

    I lost touchpad and trackpoint functionality after resuming from suspend on my ThinkPad E530 (3259CTO). Even after a complete power off (with the battery removed), the touchpad is detected but doesn't send any event, and the trackpoint is not detecte

  • Article Master--Sales view--Problem

    Hi I have 2 Purchasing orgs say 1000 and 2000 I am creating a vendor for purchase org 1000 say Vendor 1 I am creating an article with all views and with  purchase org 1000 and Vendor 1 in purchasing view with condition PB00 maintained In my sales vie

  • Trim optimization in paper mills.

    Dear all, i'm trying to understand the trim optimized model in SNO , Can any one provide me with the used nodes and details of the model. regards. Ahmad

  • Find the value using regular expresiion

    Hi All, I have a requiremnt in FInd statment using REGEX. i have values like this B1;;2009/11 Claim: 007324;SA;20081006;20091101;I004;;1032000MAR;;750;31;500481;Michael 30/07/2008;999999;EUR;247.79;007324;;;;;;K;;;FIE01240;FB01;S178740019800000011;J;

  • Trigger execution

    I have asked in an interview i have 4 triggers(statement,rowwith before and after trigger). Which triggers will execute in which Order?