Cannot install itunes 10.6, or quicktime 7, tried the system config utility, uninstalled itunes

I've uninstalled all security programs, followed the apple instructions using the system configuration utility, run windows update on my XP SP3 system, and I've uninstalled all apple programs including itunes and quicktime.  i cannot install the new itunes (10.6) or quicktime 7 - i keep getting an installer warning.  I find it exceedingly frustrating that the installer fails so consistently and that there's no clear set of instructions to resolve the problems.  i've found 5 different sets of instructions that include remove this, do that, and i've followed them, and probably cleaned up my PC lots, but still no apple software.  very irritating.  way to go apple for customer support - i got disconnected after a long wait once i finally got to talk to a human to try to find out why my serial number on my ipod doesn't register me to get to *you guessed it* SOFTWARE customer support.  as if that requires me to have the bleeding HARDWARE. 

Perfect, thanks.
iTunes error (!symbol) "There is a problem with this Windows Installer package.  A program run as part of the setup did not finish as expected.  Contact your support personnel or package vendor."
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Similar Messages

  • Ok so I cant open my Itunes due to Windows Error 2 and the message says to uninstall and re-install Itunes but I'm pretty sure that would wipe the library right? Is there any way to fix the problem and keep my library?

    Ok so I cant open my Itunes due to Windows Error 2 and the message says to uninstall and re-install Itunes but I'm pretty sure that would wipe the library right? Is there any way to fix the problem and keep my library?

    Hi neffn!
    I have an article for you that can help you go through that process of uninstalling and reinstalling iTunes. If you have Windows 7, you will want to see this article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/ht1923
    and if you are using Windows XP, you will want to reference this article:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/ht1925
    Note that, as it says in those articles:
    iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes. While it is highly unlikely that you will lose any contents of your iTunes Library when following these steps, it is always a good idea to ensure that your iTunes library is backed up. If you're unsure how to backup, see iTunes: Back up your iTunes library by copying to an external hard drive.
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • I uninstalled itunes for windows 7 and tried to install itunes 10.5 and it won't work.  I deleted all existing apple programs from my computer but when I try to install again it says so long error involved with microsoft?I uninstalled itunes for windows 7

    help ,me

    Did you try anything suggested in the last thread you posted?
    Views
    Replies
    Last Post
    I uninstalled itunes for windows 7 and tried to install itunes 10.5 and it won't work.  I deleted all existing apple programs from my computer but when I try to install again it says so long error involved with microsoft?I uninstalled itunes for windows 7

  • Received this error message when starting iTunes and reinstalling does not resolve it:  The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

    Received this error message when starting iTunes and reinstalling does not resolve it:  The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
    Can I uninstall existing iTunes without losing my media library?  and then install fresh to fix this problem?

    Hi there kweitkamp,
    You may find the troubleshooting steps in the article below helpful.
    iTunes for Windows: "Registry settings" warning when opening iTunes
    http://support.apple.com/kb/TS3299
    -Griff W. 

  • HT1923 after following the instructions to completing uninstall iTunes and related components, and I'd restarted and reinstalled iTunes, i received the error message that iTunes couldn't load because the deleted Apple Application Support wasn't present. W

    After following the instructions to completly uninstall iTunes and related components, I restarted computerand reinstalled iTunes, Then I received the error message that iTunes couldn't load because program file Apple Application Support (deleted as per instructions) wasn't present. What now?

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there.  I've uninstalled iTunes and reinstalled twice and it's not working.  Please help.

    I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there.  I've uninstalled iTunes and reinstalled twice and it's not working.  Please help.

    I have not had wifi since November when I upgraded to the newest IOS version.  I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again.  I kept doing what they told me and it worked for a couple more days and then I could never turn it on again.  My blue tooth doesn't work either.  I had to actually increase my data usage with AT&T becuase of this.  When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue.  My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!!  I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue.  Who knows how many people out there have had this issue and have not said anything about it.  Now there is a newer update that I can't do because it requires wifi in order to download.
    June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.

  • Pls.help my iphone stuck in recovery mode and itunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..

    pls. help my iPhone stuck in recovery mode and iTunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..before it was just stuck in an apple logo but when i tried recovery mode to itunes then it stuck..

    Hi awison,
    If your iPhone is not recognized by iTunes on your Windows computer you may want to use the steps in this article to troubleshoot -
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    This may also resolve your recovery mode issue. If it does not, use the steps in this article to resolve it -
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • The system encountered error before Itunes could be configured

    Hi, i can't seem to get Itunes 8 to run. Each time after the installer is launched, it has an error message that says "The system encountered error before Itunes could be configured. Your systems has not been modified. To try this application at a later time, please run the installer again."
    I am using windows vista home premium and a iTouch
    I am running out of ideas
    thanks for your help!

    me too. except now i can't delete all the programs from my computer to reinstall not happy

  • I tried to install a new os x mountain lion, but the system asked me to provide the apple id and password that was used to buy the os from the apple store online. which i don't have. how do i go ahead to install my new os x on the mC

    i tried to install a new os x mountain lion, but the system asked me to provide the apple id and password that was used to buy the os from the apple store online. which i don't have. how do i go ahead to install my new os x on the mC

    If you don't have the Apple ID and password, how did you get Mountain Liomn in the first place? Without the Apple ID and password, you'll need to buy it to download it.
    Mountain Lion

  • When i download itunes on my PC, after verifying all the system requirements, it then says program incompatible. How do i fix it?

    When i download itunes on my PC, after verifying all the system requirements, it then says program incompatible. How do i fix it?

    What's the precise text of that error message, please? (There's a few different ones I can think of that you might be getting.)

  • Hello I have a IMac OS X 10.9. 4 serial number is: YM*****ZE2 and I can not install the admin password I have tried the system and typed: appeared what I do?

    Hello I have a IMac OS X 10.9. 4 serial number is: YM*****ZE2 and I can not install the admin password I have tried the system and typed:
    root # mount -uw/
    launchctl load /System/Libary/LaunchDaemons/com.apple.Directoryservice.plist
    appeared: launchctl: Couldn´t stat(''/Sytem/Libary/Launchdaemons/com.apple.DirectoryServices.plist''): No such file or directory
    ls /User
    decl . -passwd/Users/usarname password
    appeared:operation failed with error: eServerError
    What I do?
    <Edited by Host>

    If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
    Otherwise*, start up in Recovery mode. When the OS X Utilities window appears, select
              Utilities ▹ Terminal
    from the menu bar at the top of the screen—not from any of the items in the OS X Utilities window.
    In the window that opens, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select
               ▹ Restart
    from the menu bar.
    You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
    *Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

  • HT1766 after I tried the system restore in itunes on the iphone 4 I get an error in activation.

    after I tried the system restore in itunes on the iphone 4 I get an error in activation.

    As your Posts to other threads have indicated... Your Device is indeed Jailbroken.
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    As a consequence there is No support from Apple or this Forum.
    Sorry... But...
    You will need to look elsewhere.
    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743

  • HT203175 When I try to back up my Iphone, I get a message that My Iphone can not be backed up on my computer.  My computer is authorized and I have been successful with this in the past. I uninstalled Itunes and reinstalled the lastest version and the sam

    When I try to back up my Iphone, I get a message that My Iphone can not be backed up on my computer.  My computer is authorized and I have been successful with this in the past. I uninstalled Itunes and reinstalled the lastest version and the same problem occurs.

    If you are running Tiger, you don't have time machine. 
    You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups.  The free versions do a lot and you can upgrade to the full-service versions for small change if you need more.  The one time I used SuperDuper! for cloning a volume it worked just fine. 
    (My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.)

  • The installed file can not be activated.  Since the system does not perform the registration.  What can I do?

    The installed file can not be activated.
    Since the system does not perform the registration.
    What can I do?

    I have the same issue. When trying to open the acrobat XI Pro for the first time, you are obligated to sign in with your account. But signing in is taking about an hakf hour now, while I have no problems signin in trough adobe.com with the same username and password.

  • What are the system requirements for downloading Itunes?

    What are the system requirements for downloading Itunes?
    When I go to http://www.apple.com/itunes/download/  it is not an option to download Itunes.  The box is grayed out and I can not click on it!

    Windows System Requirements
    PC with a 1GHz Intel or AMD processor and 512MB of RAM
    Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
    64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store
    Macintosh System Requirements
    Mac computer with an Intel Core processor
    OS X version 10.6.8 or later
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store
    Also, just let the page load a bit. It may become available once the page loads.

Maybe you are looking for

  • Web services 10.1.2 & 10.1.3 dev preview

    Hi, I'm trying to generate a simple web service using both the 10.1.2 and 10.1.3 versions of JDev. I create a simple class with one method to add two integers toegther and return the result. Everything generates with no errors reported but when I try

  • Generic BDC for VK11

    Hi Can any one tell me how to create <b>Generic BDC for  transaction VK11 (Creating condition records)</b> My actual requirement is like we need to create <b>condition record</b> for  every  material  with all the condition types exist for that mater

  • Exporting at smaller rate

    Imported my CD collection at a low data rate. Plan to redo the entire collection with the new Apple lossless encoder. HOWEVER... I then need to export to my older IPOD - second generation 20 gig... which doesn't support the new encoder at a lower rat

  • MRP-Exclude STO document type from MRP Run

    Hi, I want to exclude STO document type from MRP run, so that STO Open qty will not be considered as open qty while  doing MRP. I have checked below settings but didn't worked. 1. In OMI8 - I have unchecked "Stock in Transfer" 2. SPRO->Materials Mana

  • ITunes store takes ages to load on my iPhone... what to do?

    As the question says... and sometimes it doesn't load at all. Very inconvenient because I nearly always have to go on from my laptop if I wanna buy something. Is this a bug or something? I don't know but it's very problematic.