Cannot install Itunes update getting error installation  was interrupted

today i tried to upgrade to itunes6.04 during the installation i got the following error message. The itunes wizard has completed. The installation was interrupted before I tunes could be completly insatlled. he system has not been modified. to install the program at a later time,run the installation again. Click finish to exit wizard.
I have tried add remove programs, itunes is gone so is quick time.
I hae emptied all my temp files, along with doing a system restore to a prior date.
I have also tried to install my initial software cd and ge the same error message.
Also I am using norton system works which was turned off all during this time.
what can i do to get up and running again so i can use my ipod.
BEFORE I TRIED TO UPDATE ITUNES EVERYTHING WAS RUNNING FINE WITH MY IPOD/ITUNES
dell 9100   Windows XP   3.02 gig, 512 ramm

today i tried to upgrade to itunes6.04 during the
installation i got the following error message. The
itunes wizard has completed. The installation was
interrupted before I tunes could be completly
insatlled. he system has not been modified. to
install the program at a later time,run the
installation again. Click finish to exit wizard.
I have tried add remove programs, itunes is gone so
is quick time.
I hae emptied all my temp files, along with doing a
system restore to a prior date.
I have also tried to install my initial software cd
and ge the same error message.
Also I am using norton system works which was turned
off all during this time.
what can i do to get up and running again so i can
use my ipod.
BEFORE I TRIED TO UPDATE ITUNES EVERYTHING WAS
RUNNING FINE WITH MY IPOD/ITUNES
dell 9100   Windows XP  
3.02 gig, 512 ramm
I have the same problem there seems to be no solution on the discussion board. So what next?

Similar Messages

  • Cannot install itunes Keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and sup

    Cannot install itunes Keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and sup

    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

  • I cannot install iTunes updates as of today.  Does anyone have any idea what changed with iTunes?

    The question apparently needs to be typed in twice...  good work.  Here it is again:
    I cannot install iTunes updates as of today.  Does anyone have any idea what changed with iTunes?

    Is this a distinct issue from the 42404?
    If so, are you getting an error message when you try to install iTunes? If so, what does it say? (Precise text, please.)

  • TS1406 having problems installing itunes on computer so I can sysc with iphone.  had to download only then installed itunes.  getting error trying to install AppleMobileDevice64.

    having problems installing itunes on computer so I can sysc with iphone.  had to download only then installed itunes.  getting error trying to install AppleMobileDevice64.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Mobile Device Support entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • When trying to re-install itunes i get error HRRESULT:0x8007054F what does this mean?

    I am useless with technology and desperately need help!  When trying to re-install itunes i get error HRRESULT:0x8007054F what does this mean? I have followed step by step guide to de-install then re-install itunes as instructed when i couldnt connect my new ipad to my computer to synchronise it with my exisiting itunes account initially set up with my ipod. I successfully re-nstalled itunes but it wouldnt open and told me to de-install and re-install again.  This has repeated several times and now i get this error message. I dont know what to do next? 

    HRRESULT: 0x8007054F
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 8007054F, or some other number? (If they're another number, what number are you getting?)

  • INSTALLED ITUNES AND THE ERROR-MAPI WAS UNABLE TO LOAD THE INFORMATION SERVICE APLZOD-OCCURS. WHAT DO I DO.

    INSTALLED ITUNES AND THE ERROR-MAPI WAS UNABLE TO LOAD THE INFORMATION SERVICE APLZOD-OCCURS. WHAT DO I DO.

    Is this on a Windows XP, Vista or 7 system?

  • HT1222 I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed.  Your systems has not been modified."  I NEED HELP, PLEASE!

    I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed.  Your systems has not been modified."  I NEED HELP, PLEASE!

    I got it figured out myself... yaaaaay for me!

  • Cannot install itunes  I get a message that apple mobile device failed to start..  verify that you have sufficient priveliges to start system services

    cannot install itunes  I get a message that apple mobile device failed to start..  verify that you have sufficient priveliges to start system services

    Hello, Edward. 
    Thank you for visiting Apple Support Communities.
    I think the best option would be to completely uninstall all components of iTunes in the order specified of the article below.  Once this is done attempt to install iTunes again.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    If the issue persists, try the steps in the article below.
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/ts1567
    Cheers,
    Jason H.

  • Every time I try to install iTunes i get error message 2329.

    Every time I try to install iTunes i get error message 2329. This is really ticking me off and I would appreciate any help.

    Here is an article from the apple support website that might help out.
    http://support.apple.com/kb/HT1926?viewlocale=en_US

  • HT1349 cannot install iTunes download gets to 99% and always stops

    cannot install iTunes download gets to 99% and always stops. Unistalled old version but it just won't install Version 10.5. Have tried at least ten times. Any ideas Please?

    did you uninstall all 6 components in itunes though? 
    Removing and reinstalling iTunes, QuickTime, and ... - Support - Apple

  • Cannot install iTunes because of Windows Installer Package

    Cannot install iTunes on Windows 7 because of Windows Installer package is missing.

    Okay. Even though you're getting a different error message, try the procedure from the following user tip:
    "The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

  • TS3212 I have a new computer, a HP with windows 8. I try to install itunes and get error. Says the installer has encountered an enexpected error installing thics package. This may indicate a problem with the package. The error code is 2503.

    I'm having problems installing Itines on my new computer with Windows 8. I always get problem with install. the error code is 2503. How do I correct this?

    Although you're getting a different error message, perhaps try the procedure from the following user tip:
    "The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

  • HT3204 new ipod touch. can access iTunes store. cannot create iTunes ID. get error "could not complete iTunes request. unknown error occured (-1202)".Ipod updated to latest issue,firewall exception allowed.SSL 3.0 & TSL 1.0 ok. Running windows Vista. Help

    New ipod touch 32gb. Can access iTune store.Can sample music selection. Completed latest update for ipod Can't make any purchases. Get error "could not complete your iTunes store request. An unknown error occured  (-1202)". security SSL 3.0 & TSL 1.0 OK. Firewall enabled for iTunes. ???

    laneymenion wrote:
    Using Proxy: Yes
    HTTP Proxy: 192.168.100.15:80
    Change the Using Proxy to No
    Have you allowed itunes and itunes helper in your security software firewall?

  • Cannot install iTunes, Windows 7; error 7

    I downloaded the last iTunes update and since then, have not been able to open iTunes.  I have followed the instructions from the community posts about uninstalling iTunes and all the ancillary programs several times and still cannot open iTunes.  Each time I reinstall, I get an error message about the Apple Mobile Device Support and the install stalls.  I cannot get past it.  If I hit ignore and let the install finish, I end up with error message iTunes not installed correctly, please reinstall Error 7.
    I run Windows 7 on a Toshiba Satellite laptop.  All of my Windows updates are current.
    Please help.  I can't back up my iPhone b/c my settings are for backup on computer.  I cannot backup on cloud b/c of this.  Because I cannot backup, I have updated my software on the phone yet.
    In backup/upgrade limbo.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Cannot install Itunes update, 'itunes64.msi' missing

    Basically I tried to update my iTunes to 11.2 but it will not let me, every time I try I get an error saying the download source cannot be found/verified, and that it cannot locate 'iTunes64.msi'
    I also tried uninstalling itunes and the same error comes up.
    Anyone know what the problem is?

    "The Windows Installer Service could not mbe access.  This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed.  Contact your support personnel for assistance"
    Even though you've got a 7 rather than a Vista, the following document might be worth a try:
    Vista Home Premium (x64) and installing Itunes - SOLUTION

Maybe you are looking for

  • Need advice on Lenovo ThinkServe​r TS200v - 098119U - I'm a newbie to Lenov

    I'm looking to buy this server: Lenovo ThinkServer TS200v Intel Core i5-650 3.20 GHz 2GB DDR3 500GB HDD Server But I would like to increase the ram from 2G to 4 G and add an additional 500GB HDD.  The OS is also missing and I plan on buying: Lenovo M

  • Allocation error

    After several startup errors, I finally repaired the startup disk with disk utility, and my iMac 24" has been running fine for 5 days.  But this morning I noticed it started to slow down again, and disk utility check said disk corrupted, need to be r

  • When a continuous item loses connection itunes rollsover to next item in list. Can I change that?

    I have a playlist that lists streaming radio stations. If the current station loses it's connections - sometimes it is re-buffering and it self-corrects. But when it just drops that connection iTunes app rolls over to the next item in the playlist an

  • Best practices for XMLType to RDMS migration

    We are storing XBRL files (basically XML) into oracle 11.2 as XMLType. Each XML files containing more than 500 tags. For reporting purpose we are extracting around 200 values from XML files to normal tables (NORMAL_TABLE).Reading from XML file direct

  • Dynamic select list with one static 'not_listed" option

    Hi guys, I want to create a dynamic select list with one static 'not_listed' option. One possible alternative is to add the 'not_listed' record into database, but I really dont want to go that way unless there is no other way around. Can anyone shed