Cannot install JDK 1.4.2 on Windows 2008 Server

Hello,
I am trying to install JDK 1.4.2, but I get this error message:
"Internal Error 2902. ixoFileCopy"
I tried serveral versions (JDK 1.4.2_15, 1.4.2_19, 1.4.2_18, ...) but I get always the same error.
It is a fresh Windows Server 2008 installation (not 2008 R2), and I need JDK 1.4.2 for NW 7.01 installation.
Any help is welcome!
Best Regards,
Holger

Hello,
I found the solution, see [SAP Note 1230512 - Ende des Produktlebenszyklus von Sun J2SE 1.4.2|https://service.sap.com/sap/support/notes/0001230512]
I did not download the Java for Business Version. With this verions and Patch 27 it works....
Best Regards,
Holger Slomka

Similar Messages

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp 4000n.

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp laserjet 4000n.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

How to install a plugin on 64 bits windows 2008 server?

From the developer forum, I found a description which told me how to install a plugin on windows series system, but I only succeded intalling the plugin on 32 bits windows xp, couldn't install the plugin on 64 bits windows 2008 server. Any ideas or advices, men of genius? Thanks :-)

Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

Installing CF8.0.1 64 on Windows 2008 Serv

Does anyone have a set of instructions on installing CF8.0.1
64bit on Windows 2008 Server. I have tried on and off for the last
two weeks and have made no progress. The install goes great,
however the CF administrator component of the install fails with a
HTTP Error 500.0 - Internal Server Error. IIS7 worked fine prior to
coldfusion installation, however once CF 8.0.1 gets installed IIS7
appears to break. I've read the other thread in the forum and the
suggestions made there don't help or have already been done.
Module IsapiModule
Notification ExecuteRequestHandler
Handler AboMapperCustom-72626
Error Code 0x800700c1
Most likely causes:
- IIS received the request; however, an internal error
occurred during the processing of the request. The root cause of
this error depends on which module handles the request and what was
happening in the worker process when this error occurred.
- IIS was not able to access the web.config file for the Web
site or application. This can occur if the NTFS permissions are set
incorrectly.
-IIS was not able to process configuration for the Web site
or application.
-The authenticated user does not have permission to use this
DLL.
-The request is mapped to a managed handler but the .NET
Extensibility Feature is not installed.
Things to try (from the error summary page)
- Ensure that the NTFS permissions for the web.config file
are correct and allow access to the Web server's machine account.
- Check the event logs to see if any additional information
was logged.
- Verify the permissions for the DLL.
- Install the .NET Extensibility feature if the request is
mapped to a managed handler.
- Create a tracing rule to track failed requests for this
HTTP status code.
Adobe in going to expect a $6700 check from me in another
week or so and the damn thing doesn't install to the point where
the demo's will run. Windows 2008 and IIS7 isn't that new and I
can't imagine that the number of people having done this is limited
to the one or two in this forum and that there is no technote avail
to us that have to depend on internet support and published
technotes that can document the installation procedure of CF 8.0.1
64bit on windows 2008.
It's the fourth of July and this is a fine place to be.
Happy 4th everyone!

Please see this link:
http://www.jasonholden.com/blog/index.cfm/2008/5/6/Coldfusion-8-on-Windows-Server-2008

Install ODI 10g on 64 bit Windows 2008 server

Can we install ODI 10g on 64 bit Windows 2008 server ? if so Please provide the me the link for download
Edited by: user1137989 on Oct 27, 2010 10:51 PM

If you are looking for 10g then scroll down in the link (http://www.oracle.com/technetwork/middleware/data-integrator/downloads/index.html) Oracle Data Integrator 10g (10.1.3.5.0) and select for Microsoft Windows (x86) and extract and install .
11g comes in 32 and 64 bit version .
32 bit version is
Oracle Data Integrator 11g (11.1.1.3.0)
for Microsoft Windows (x86)
64 bit version is .
Oracle Data Integrator Companion 11g (11.1.1.3.0)
for All Platforms
Hope this helps .

How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

Hi Everyone,
I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
"Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
Awaiting your response.
Farid

Hi ,
LMS 3.2 is not supported on Windows 2008 Server Standard R2.
here is the supported platoform for LMS 3.2
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
Thanks,
Gaganjeet

Can install Oracle 10g release 2 on Windows 2008 R2 Server 64-bit machine

Hi All,
Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.
Regards,
Rizi

Hi;
Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.Yes you can but you must use 10.2.0.5.0 version. Pelase check below note:
How to Install Oracle 10.2.0.5 on MS Windows 7 / Windows 2008R2 [ID 1173433.1]
Regard
Helios

CF9 install on Windows 2008 Server R2

Hi everyone I've installed Cold Fusion 9 on my windows 2008 Server r2 box and everything appears to be configured correctly becuase I can get to the Cold Fusion 9 Administrator page just fine. I've looked within IIS 7.5 and it's recognizing the .cfm file I think becuase it's an option under default documents. However I try to view the file from the local host I get a error 500.0.
Module
IsapiModule
Notification
ExecuteRequestHandler
Handler
AboMapperCustom-77246
Error Code
0x800700c1
I have no idea what that mapper is or what it's supposed to do so if anyone could help me out I would be eternally grateful! Why oh why couldnt cold fusion 9 have native IIS support in it.
UPDATE
Apparently this error 500.0 gets applied to all my sites within IIS 7.5. Not just the one I intend to use .cfm files on. When I go into the web configuration tool and remove the configured webservers and restart everything goes back to normal but the .cfm files throw a 404.3 not found error for the following module.
Module StaticFileModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x80070032

Hi
Windows Server Core edition is not listed as supported platform:
http://www.adobe.com/products/coldfusion/systemreqs/
HTH, Carl.

I cannot install iTunes. I get a Windows Error 126 and missing msvcr80.dll. I've tried uninstalling and re-installing based on all the suggestions, but still have an issue

I cannot install iTunes. I get a Windows Error 126 and missing msvcr80.dll. I've tried uninstalling and re-installing based on all the suggestions, but still have an issue. I've removed all the services, tried moving the dll files as suggested, but I still have no success. Spent all day on this issue. I am running windows 7.

Sorry to hear this isn't going smoothly for you. Try Troubleshooting issues with iTunes for Windows updates. You may have seen some of the suggestions here before but is has taken some users more than one attempt.
tt2

Cannot install HP Photosmart 2610 Driver with windows xp

cannot install HP Photosmart 2610 Driver with windows xp. keep getting registry error messages part way through the instal.. any suggestions? Thanks

Hello,
Please check if you have an ADMIN rights to log into your PC.
Else, create an ADMIN user account and then run the installation ,
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Cannot install LR5 due to not having Windows 7.

I purchased an update of LR5 and cannot load it because I do not have Windows 7. Is there anything I can do other than buying a new computer?

From what I conclude, it is not an upgrade to 4.4, but a stand alone program that all of a sudden needs windows 7, which I do not have. After downloading windows 7 test program to see if I can have windows 7 and it's compatibility, it turns out my machine is not compatible or many issues with warning symbols. I am in the process of purchasing a new laptop with 12GB ram and 1TB hard drive, windows 8, with NVIDIA G Force video card just so I can play with LR5. All I am saying is, if it's an upgrade, fine, don't change the operating system requirements. Make it a stand alone program. Then, previous owners of LRxx have the option of buying LR5 at a reduced rate rather than paying full price. Then everyone is aware of the incompatibilities.
Thx for listening to my rant and I appreciate Adobe to offer to repurchase the software. I just hope I can re-load LR4.4 on this new laptop and accept LR5 without having to pay again for LR4.4.
Rémi Villars Jr.
[email protected]
Date: Fri, 14 Jun 2013 16:50:13 -0700
From: [email protected]
To: [email protected]
Subject: Cannot install LR5 due to not having Windows 7.
    Re: Cannot install LR5 due to not having Windows 7.
    created by Ned Murphy in Downloading, Installing, Setting Up - View the full discussion
You're welcome Rémi,
Unfortunately, purchasing software, much like anything else you buy online, is pretty much on the buyer to beware. The vendor cannot know the intended use, whether the software is being purchased for the machine at hand, or another machine, or as a gift for someone else. They provide a list of system requirements in the product pages but don't intrude into your machine to determine whether or not it is a suitable match.
It looks like Jeff might have provided a reasonable recourse for you. Hopefully you won't run into a problem there.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5410551#5410551
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5410551#5410551
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5410551#5410551. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Install windows 2008 server r2 as a vm on windows 8.1 pro

I am trying to install windows 2008 server r2 as a vm on an asus I7 4th gen. on windows 8 pro. It goes
thru the install untill completing install and gives error the computer restarted unexpectedly or encountered an unxpexted error windows installation cannot proceed click ok to restart. I do the shift f10 and change the registery to force finsh the install.
It boots up but when I try to do anything. It goes into netio.sys BSOD issue

I haven't run into that problem, but when setting up the OS, just
remove the NIC from the settings, do the install, make sure it's running, then install the integration
services, reboot, then add the NIC back in.
You could also use a legacy network adapter if that doesn't work.
In any case I'm trying an install of Win2008R2 right now so I can see if I get the same problem...
Bob Comer Microsoft MVP -- Hyper-V

Windows 2008 Server R2 - Service Pack 1 Failed to install

A few nights ago I deployed Service Pack 1 for Windows 2008 Server R2 x64. The update failed to install after 3 attempts using the Windows Update manager. After the third time I checked the system properties which states that SP1 is
installed, yet it never appeared to install successfully as my other server machine had a prompt stating the SP was installed successfully.
In update history it shows the 3 failed attempts with no successes. This morning I began running into memory errors which are impacting my 2 VM Ware sessions which in turn lock up my virtual machine so I am going to attempt to remove and reinstall
to see if this corrects my issue. By the way what triggered the install of SP1 is random reboots of my server. This is that unknown Kernal Power Error which I have yet to resolve. Some months my server randomly reboots one time and other
months 4-5x. That is neither here nor there, the point of this discussion is to resolve SP1.
I have tried to remove SP1 by means of Control Panel, Programs and Features, Installed Updates. So it shows the that the SP1 installed in multiple areas yet in the install history no signs of successful installation.
When trying to uninstall from Program and Features/Installed Updates section in control panel it cycles through like its going to uninstall, but after several minutes I receive the following error      Windows Update
An error has occurred. Not all of the updates were successfully uninstalled.
When trying to uninstall from the command prompt (as administrator) "wusa.exe /uninstall /kb:976932" I get the following popup            Windows Update Standalone Installer
Installer encountered an error: 0x80073712       The component store has been corrupted.
Now if I try and install through the network installer file name "windows6.1-KB976932-X64.exe" I get "Windows Server 2008 R2 Service Pack 1 is already installed"
I performed these steps in the order mentioned which I came across this "System Update Readiness Tool for Windows Server 2008 R2 x64 Edition (KB947821) [February 2011]" After applying this hotfix I went through the same steps as mentioned above with the
exact same results.
It is unfortuante I did not come across this hotfix before I attempted install SP1 as it appears as if this would have prepared the system for SP1 installation. Currently I am in limbo with a corrupt installation of SP1 and so far no means of uninstalling
short of a reinstallation or repair of the OS which I am not willing to do at this point in time.
If anyone has any suggestions please chime in and let me know what I can try. Thanks for all the support and hopefully this post will help others in the future.

Maybe a little bit late, but I was running almost same problem on a exchange server.
Scenario:
First attempt to Update the windows patches - excluded the patches from the last 2 months.
I was kind a new to this, and didnt noticed that Windows Service pack must have at least 8GB free disk space.(Recommended)
So the C:\ partition had less then 5 GB free disk space, and I started the updates.
All went well until Windows SP1 begun running to downloading and installing.
When the installer noticed there wasnt enough space, It stopped, it give the status Failed, en when scaling up the C:\partition with another 10GB more space, the C:\partition had 18GB free disk space.
Tried to Call up a new attemp to install the SP1... but with no succes to start the SP1 installation...
I tried to reinstall but the windows update didnt get offered again to install again or resume or anything to try again...
Maybe...it is handy for Mickysoft, to check before installing, so the install wont get corrupted, and can install when c:\ partition has enough disk space.
What was the trick:
1) Stop the windows Update Service
2) C:\Windows\SoftwareDistribution\DataStore - Delete content
3) C:\Windows\SoftwareDistribution\Download - Delete content
4) Windows update Service check if its runs again
5) Check again for windows updates - Check if Windows Server Service pack 1 is offered, and install reboot and youre good to go.
It works for me :) hopefully after 3 years you had found a solution, but since I was poping for a solution and found this article with no solution.
I tought it will be hopefull for others to respond to this article with a solution.
Kind regards,
Alexander Tjintjelaar
Micky soft noob

Windows 2008 Server - Cannot run Active Directory Users and Computers

Hi,
I am running Windows 2008 Server with latest windows updates installed. Directory Services Role also.
I attempt to open Active Directory Users and Computers tool and I get a;
Microsoft Visual C++ Runtime Library error;
"The Application has requested the runtime to terminate it in a unusual way. Please contact the application's support team for more information"
I click ok, then get the following debug info;
Problem signature:
Problem Event Name: APPCRASH
Application Name: mmc.exe
Application Version: 6.0.6001.18000
Application Timestamp: 47919524
Fault Module Name: msvcrt.dll
Fault Module Version: 7.0.6001.18000
Fault Module Timestamp: 4791ad6b
Exception Code: 40000015
Exception Offset: 0000000000029b06
OS Version: 6.0.6001.2.1.0.272.7
Locale ID: 3081
Additional Information 1: 43aa
Additional Information 2: cf3a46656318492c1997480001b6b0e0
Additional Information 3: 3837
Additional Information 4: 92f72e0d0589ff77cef51e0a413aeff6
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
If someone could please assist, it would be very much appreciated.
Regards
B

Hi,
To solidly troubleshoot this kind of issue, we need to debug dump file. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
However, I am also glad to share my research.
Some third party applications may lead to this error. Please check if you install other third party applications on Windows server 2008?
Also, please follow the article below to perform necessary steps to see how it's going?
FIX: You receive an "invalid page fault in module MSVCRT.DLL" error message after you install the run-time libraries from Visual C++ 6.0
http://support.microsoft.com/kb/190536/en-us
Hope this helps.
Best wishes
Morgan Che

How to install EBS 11.5.10.2 on windows 2008 Server

Hi All,
I need to install 11i (11.5.10.2) on a windows 2008 server sp2 machine. I'm using perl 5.8.9 but running perl adautostg.pl returns this error:
Perl lib version (v5.6.1) doesn't match executable version (v5.8.9) at c:\oracle\VIS\apps\tech_st\10.1.2\perl\5.6.1\lib\
MSWin32-x86/Config.pm line 21.
Compilation failed in require at adautostg.pl line 43.
BEGIN failed--compilation aborted at adautostg.pl line 43.
The documentation says:
You must have perl 5.0053 or higher installed...
What am I missing here?
Thanks,
Konrad
Edited by: Konrad on 15.12.2010 17:11

See note 986762.1 General Notes For E-Business Suite Release 11i
Installation.
* For 11i new installations: Using the Rapid Install, install all tiers (including the database tier) on a Supported Applications Platform. Then, migrate the database to the "Split Configuration Database Tier" platform.
9iR2 database to an Itanium or x86-64 database server, review "Using Oracle E-Business Suite with a Split Configuration Database Tier on Oracle 9i Release 2", Metalink Document 304489.1.
login to support.oracle.com
Oracle Application Install 11.5.10.2 (11i) Microsoft Windows (32-bit) 2008Oracle Server - Enterprise Edition / 11gR2 Certified
select cerification tab--> Oracle E-Business Suit --> Application Technology -->Lifecycle Managemement
All Products > Oracle E-Business Suite > Applications Technology > Lifecycle Management > Oracle Application Install
Then select
All Platform/Versions > Microsoft Windows (32-bit)
All Release/Versions > 11i (Application Install)
All Platform/Versions > Microsoft Windows (32-bit) > 2008
you can find all certifications.

Cannot install JDK 1.4.2 on Windows 2008 Server

Similar Messages

Maybe you are looking for