Cannot install JRE version 1.3.1_08

I am running Windows XP Home.
When I install j2re-1_3_1_08-windows-i586-i.exe by double clicking on it, everything seems to go OK, the installer says that installation was successfull.
But when I check objects via Tools ... Temporary Internet files ... Objects, the column STATUS contains the word Skadad (swedish) = Damaged.
When I installed version 1.4.2_04, then the installation was OK. But I HAVE TO use version 1.3.1_08 because the application cannot use version 1.4.2
Please HELP!

Thanks for your message. I tried 1.3.1_13 but result is the same.

Similar Messages

No admin privilege. Cannot install latest version of iTunes

I have no admin privileges for corporate laptop. Cannot install latest version of iTunes. No problem with previous versions. Any ideas?

Hey Roderick136,
If you haven't encountered issues previously, then I would try following the steps in this link:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Let us know if that helped resolve the issue.
Welcome to Apple Support Communities!
All the best,
Delgadoh

Cannot install flash version 10.1.0 onto a mac 10.4.11

Hello,
I cannot install flash version 10.1.0 onto a mac 10.4.11 and therefore cannot use YouTube or the BBCIplayer. Is there a compatability problem?

I am in the same boat. I cannot watch flash videos on the BBC website or on BBC iPlayer, although all other flash videos (YouTube for example) are fine.
For reasons that passeth all understanding, they work with the PPC version of Firefox, called TenFourFoxG5.app, once you have anabled plug-ins, as it does not natively support Flash.
You can download TenFourFoxG5 from here:
http://www.floodgap.com/software/tenfourfox/
Now for the intersting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
But there is a workaround!
Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
Look/search (scroll down) for: tenfourfox.plugins.enabled
Set it to true. (Double click it to toggle it)
Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
I am using Flash 10.1.102.64 in TenFourFox and it works just fine.

Cannot install latest version of i-tunes on computer

cannot install latest version of i-tunes on my computer

I am getting issue while downloading iTunes 11.1.3 for my Iphone 4S
I am successfully able to install the iTunes on the computer, but when I open the software I get following Error:
"Apple Application Support was not found.
Apple Application Support is required to run iTunes. Please uninstall iTunes and install iTunes again.
Error 2 (Windows Error 2) "
Any help ?

Cannot install new version of itunes, cannot remove old version

cannot install new version of itunes, cannot remove old version

http://support.apple.com/kb/ht1925
See this for your query.

Cannot install new version of iTunes

I cannot install the newest version of iTunes due to cpu not finding "iTunes.msi"

I cant download either
https://discussions.apple.com/message/15280628#15280628
wish theyd fix it

Cannot install newest version of iTunes

I cannot install the newest version of iTunes as I get an error message: "Cannot write value to key \Sopftware\Classes\Tunes.aa\shell\open\command. Check if you have sufficient access rights for this key, or contact the support personnel". What to do?

Hey BertBes,
Thanks for the question. I understand you are experiencing issues installing iTunes for Windows. The following resource may provide the solution:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M.

Cannot Install Latest Version of Skype - Presumabl...

I presently have version 6.18. When I try to install latest version I get a message "cannot open HKEY\LOCAL\MACHINE32\Software\Microsoft\Internet Explorer\Main\Feature Control\FEATURE_MAXCONNECTIONSPERSERVER".
When I check the registry I do not even have a MAX_CONNECTIONSPERSERVER key under Feature Control. I've tried adding it but do not apparently have the permission level.
Any help would be appreciated.

Try this Lessmsi method:
http://community.skype.com/t5/Windows-desktop-client/Impossible-to-install-v6-13-0-104-Error-1603/m...
Be aware that if you want to install the currently latest 6.22.81.104 version, then you should use SkypeSetup_6.22.81.104.msi file in order to extract Skype.exe and Login.cab files.
SkypeSetup_6.22.81.104.msi file can be downloaded using this link:
http://download.skype.com/msi/SkypeSetup_6.22.81.104.msi

Cannot install any version of IE

Hi there,
I am having some issues with one of our Terminal Servers, which is running Windows Server 2008 R2 64bit. It did have IE9 installed and when tried to upgrade this to IE10 or IE11 it was failing with the error "Internet Explorer did not finish installing".
There is no much helpful info in the event logs either.
So, following some other advice on here, I was pointed to the fact it could be that IE9 was corrupt and could be upgraded. I was advised to remove IE9 and try installing it again and then go through the upgrade process. However, there is an issue here. Once
IE9 was removed (through Uninstall an update in Control Panel), IE8 wasn't there. I still cannot install IE 9, 10 or 11 on this server now. What's also a concern is that now I cannot open Event Viewer or any other MMC as it shows an error about MMC will not
run with a version of Internet Explorer earlier than IE 5.5.
Any tips or ideas on how to resolve this?

You can ask them in IE forum: https://social.technet.microsoft.com/Forums/ie/en-US/home?forum=ieitprocurrentver
They are more familiar with this.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Installer built with Application Builder gives error "Cannot install, higher version already installed"

I am having an issue with an installer which I created with the Application Builder. I have a project that I have successfully deployed. Subsequently I created another project (and vi) which is based on a copy of the originals, both with new file names. In the renamed project file, I changed all file names, paths, and all resources, to reflect the new names. I also changed the installer’s destination and install folders, of course. I reset the executable’s version number (in the Build Specification properties) to 1.0 (the original was 1.3). I then successfully built an executable and the application installer. However, when I run the installer (setup.exe), it gives a dialog (after the license screen) that it “Cannot install” because a “higher version already installed”.
I’ve done exactly the same thing with other vi’s and projects of mine, and never had this issue. The installer correctly installs the newly created (and renamed) version where it is told to in the project file. Also, I’ve never had a problem deploying (installing) on my development PC either.
I have carefully checked and rechecked to make sure there is no reference to the original executable or paths. What could be causing this behavior? I want to keep the two projects completely separate, so simply changing the version to higher than 1.3 is not an acceptable solution.
Thanks to anyone in advance for any help and suggestions.
Ed

Yes, LV 8.5 does NOT give me control over the GUID. In the project file there are three such strings:
"App_applicationGUID"
"App_INI_aliasGUID"
"App_INI_GUID"
They all have different numbers and none of them match the GUID or PackageGUID in setup.ini. I don't know if they are related or not, but usually it's not a good idea to mess with (manually edit) files like these (project, ini, etc.) unless you know what you are doing. (For example, I do edit the setup.ini file to change some of the [Dialogs] parameters, but that is based on direction from NI support.)
Anyway, like I said, I've made copies of projects before and never ran into this problem. At least I have a solution, however laborious, in creating a new project file from scratch.
Let me know if anyone has more thoughts on this.
Ed

Cannot install JRE 1.6u7

Hello,
I recently formatted my hard drive and after reinstalling Windows XP SP2, I am having problems installing JRE on my system.
These are two different types:
1. When I double-click the offline installation file [version 6 update 7, newly downloaded], nothing happens. The process shows up in the task manager for a few seconds, and then disappears completely. No further procedure takes place.
2. I observed that doing the above mentioned step leaves the installation MSI file at the location "C:\Documents and Settings\<user>\Application Data\Sun\Java\jre1.6.0_07\jre1.6.0_07.msi". If I double-click on this particular file, the installation starts without problem, but gives an error at the end.
The error is: "bin\java-rmi.exe: Old File not found. However, a file of the same name was found. No update done since file contents do not match."
After that, the installation gets canceled and it then it gives another error message - this one about the MSI package - Error 1722 to be precise.
"Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."
Then it does the revert back procedure, which actually doesn't revert anything. All files created remain on the hard drive.
The log file at "C:\Documents and Settings\<user>\Local Settings\Temp\MSI30af4.LOG" mentions the following:
"Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action patchjre, location: C:\Program Files\Common Files\Java\Update\Base Images\jre1.6.0.b105\patch-jre1.6.0_07.b06\patchjre.exe, command: -s "C:\Program Files\Java\jre1.6.0_07\"
=== Logging stopped: 7/15/2008 23:07:43 ==="
I went to java.com and tried the various solutions mentioned there, but none of them seem to work. I even tried to install an older version of JRE, but with the same result.
I sincerely hope you can help me troubleshoot the problem.
Thanks in advance,
Levi Smith.

The first time I tried to install, it was on a freshly formatted hard drive and a freshly installed OS. So there was no such directory present. After that, however, I tried the installation after removing all the previously created files, cleaning the registry, etc. So again that directory was not present by my reckoning.
Oh, and I also tried to install in a different folder - C:\Java or D:\Java, etc. but with same result.
Do you need any more details to solve this mystery?

WinNT4.0: Cannot install JRE 5.0 Update 7

I have a clean install of WinNT4.0 with SP6, IE6+SP1 and all Windows Updates. Nevertheless I�m not able to install JRE. During the install process I get a "there is a Windows Installer problem. A specific DLL cannot be executed" (roughly translated from german). Why is that happening on a clean installation? Right now I cannot even unstall. I�m stuck :(

Many people (including me) posted this "INSTALLATION PROBLEM" (Windows Installer going crash when attemting to install JRE 5.0 Win for AMD64).
It seems DEP (Data Execution Prevent or Protection...) service causing "forced" quitting of Windows Installer, but whatever you either exclude Windows Installer application from DEP list or even turn-of DEP service it won't help in any case.....Windows Installer 'll encounter problems anyway..and crash when attemting install.
Sun says (in a "post note") that support for AMD64 'll be available since the release 2 of JRE 5.0 but for what Operative System??
On Windows XP PRO 64bit Ed. (or was only for Windows 2003 Server 64bit Ed.?) the support for AMD64 CPU has been introduced only in this latest release 4, and IT DOESN'T INSTALL AT ALL (at least for some users..)!
Most strange thing is that although there are several complaints concerning this matter since many time, NOBODY seems to have been able to fix to this common complaint. Is it possible nobody at Sun applied on this problem? Are they still working on it? Did they fix it? If anybody knows anything about this matter, please take me informed! Thanx.

Hey i dont have a mobile phone i have toshiba "laptop" to say this way and i cannot install firefox becuase this laptop runs android and cannot install linux version...can u help me?Also i cant install adobe flash player...Any advices??

Hey I have a toshiba laptop and I cannot install firefox because the laptop runs android and there's only version for linux...and if u can tell me how to install adobe flash player too...Any advices??

This is a known problem, but we don't have a solution for it. If your device has the Toshiba Market app, you might be able to download a (possibly outdated) version of Firefox from there.
For more info, see:
* https://support.mozilla.com/en-US/questions/790362
* https://bugzilla.mozilla.org/show_bug.cgi?id=623929

Cannot install latest version of iTunes 10.6.

Running 64 bit Windows Vista Home . Failed to install latest version of iTunes 10.6 with error message "The feature you are trying to use is on a network resource that is unavailable.......click OK , or enter an alternative path to a folder containing the installation package iTunes64msi"
After using this source in the box below and clicking OK it comes up with another error reading: "the file C:\Users|My name\AppData\Local\Apple Software Update\iTunes64msi' is not a valid installation package for iTunes. Try to find installation package 'iTunes64.msi" in a folder from which you can install iTunes".
As I could not find this file I then uninstalled iTunes, Bonjour, Apple Software Update, Apple mobile device support, and Quicktime and all related files as instructed from iTunes support page and tried to re-install all again. Unfortunately they all installed except iTunes which came up with the same error messages again.
Is this an Apple or Windows problem?...........HELP!

"The feature you are trying to use is on a network resource that is unavailable.......click OK , or enter an alternative path to a folder containing the installation package iTunes64msi"
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Cannot install JRE version 1.3.1_08

Similar Messages

Maybe you are looking for