Cannot install jwsdp-1.2 on Windows 2003 Enterprise Server

Hello,
We are trying to install jwsdp-1_2-windows-i586.exe on a Windows 2003 Enterprise Server system, but unfortunately we are not able to do this.
Even worse the installation program simply stops without any message at all. So we have no clue how to proceed. Any help would be appreciated.
Greetings,
Erwin.

Yes,
I have attached the output, but the installation just stops..
Greetings,
Erwin.
D:\install>jwsdp-1_2-windows-i586.exe -console
Initializing InstallShield Wizard...
Searching for Java(tm) Virtual Machine...
Searching for Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Searching for Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Searching for Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Searching for Java 1.4X by Sun Microsystems
Verifying Java 1.4X by Sun Microsystems
D:\install>

Similar Messages

Error while Installing R12.1.1 on Windows 2003 Enterprise Edition

Dear All,
I am installing R12.1.1 on Windows 2003 Enterprise Edition Server. I am using the media source that i have downloaded from Oracle Edelivery. I have done a MD5Sum check on the dowloaded files based the MD5SUM Check details given in site. (Not after staging).
I have the stage files in the same partition as the partition in which the OS & Oracle is being installed (Free space is 300GB after staging)
When the Installation reaches 53%, the installation fails with the following Error: "RW-50004: Error code received when running external process. Check log file for details. Running APPL_TOP Install Driver for VIS Instance"
Log File:
=====================
e:\oracle\VIS\inst\apps\VIS_r12\logs\03021433.log
================================
Processing Step 3 of 5
Executing: e:\oracle\VIS\inst\apps\VIS_r12\temp\adrunias.cmd
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Perform the registration for tech stack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Statusstring Registering Applications Technology Stack
Statusstring Registering Applications Technology Stack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | D:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx512M -classpath .;D:\StageR12\startCD\Disk1\rapidwiz\jlib\java;D:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyAppsTechStack -e e:\oracle\VIS\inst\apps\VIS_r12\appl\admin\VIS_r12.xml -stage D:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase reg -nopromptmsg
Log file located at e:\oracle\VIS\inst\apps\VIS_r12\admin\log\ApplyAppsTechStack_03021625.log
**** truncated *************
- 3% completed
\ 3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
RC-50013: Fatal: Failed to instantiate driver e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
Cannot execute registration of Applications Techstack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for VIS instance
ApplyAppsTechStack_03021625.log
=========================
Started ApplyAppsTechStack at Wed Mar 02 16:25:21 IST 2011
Version:
ApplyAppsTechStack.java : 120.23
Executing home registration for s_weboh_oh...
Registering using Registration Driver
e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\ouicli.pl
setting permissions: 700
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\txkstubcfg1013.pl
setting permissions: 700
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
dest : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to e:\oracle\VIS\inst\apps\VIS_r12\out\apachectl
setting permissions: 700
Executing script in InstantiateFile:
e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
script returned:
Timed out( 3750000 ): Interrupted Exception
Beginning OUI CLI cloning for s_weboh_ohWed Mar 2 16:25:24 2011
e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin\java.exe -classpath D:\StageR12\startCD\Disk1\rapidwiz\jlib\java;e:\oracle\VIS\apps\tech_st\10.1.3\oui\jlib\OraInstaller.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e e:\oracle\VIS\inst\apps\VIS_r12\appl\admin\VIS_r12.xml -nolink -oaVar s_weboh_oh -homestub weboh -log e:\oracle\VIS\inst\apps\VIS_r12\admin\log\ohclone.log
running OUI CLI home cloning:
e:\oracle\VIS\apps\tech_st\10.1.3\oui\bin\setup.exe -nowait -clone -silent -force -nolink -waitForCompletion session:ORACLE_HOME=e:\oracle\VIS\apps\tech_st\10.1.3 oracle.as.j2ee.top:s_asInstanceName=VIS_r12_WEBOH oracle.as.j2ee.top:s_adminName=oc4jadmin oracle.as.j2ee.top:s_adminPassword=welcome ORACLE_HOME_NAME=VIS_r12_WEBOH -J-Doracle.installer.noLink=true
Executing script in InstantiateFile:
e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
script returned:
.end std out.
.end err out.
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\ouicli0.pl
setting permissions: 700
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\txkstubcfg10130.pl
setting permissions: 700
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
dest : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to e:\oracle\VIS\inst\apps\VIS_r12\out\apachectl0
setting permissions: 700
e:\oracle\VIS\inst\apps\VIS_r12\admin\log\adcvmlog.xml does not exist. Ignore it
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone
ouicli.pl INSTE8_APPLY -1
AutoConfig is exiting with status 1
RC-50013: Fatal: Instantiate driver did not complete successfully.
e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
I have gone through the meta link document [989752.1]. But I feel that document does not apply to me as i am not running the installation from a network storage area.
Pl. help me.
Thanks and regards,
Adm.

AN Update:
The Oracle Universal Installer shows the following in the screen before the error appears:
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks w
ill be executed.
Preparing to launch Oracle Universal Installer from D:\DOCUME~1\ADMINI~1\LOCALS
~1\Temp\OraInstall2011-03-02_04-25-26PM. Please wait ... Oracle Universal Instal
ler, Version 10.1.0.6.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
...............................................................Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
path: D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\jre\bin
;.;D:\WINDOWS\system32;D:\WINDOWS;D:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;D:
\MVS\VC\bin;D:\cygwin\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbe
m
toload is D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\Win
dowsGPortQueries.dll
100% Done.
Copying files in progress (Wed Mar 02 16:25:59 IST 2011)
.................................................Val: 0
. 79% Done.
Copy successful
Setup in progress (Wed Mar 02 16:26:05 IST 2011)
.....Oracle JAAS [Wed Mar 02 16:26:28 IST 2011]: exception: 9
opmnctl: opmn started
Please help me.
Thanks and regards,
Adm

CA and Certificate Issue in ACS 4.0 For Windows 2003 Enterprise Server

Hi,
I have configured Microsoft CA server on the same ACS 4.0 for Windows 2003 enterprise server which was configured earlier using the self generated certificates for EAP and PEAP authentications.
After I change the certificate from self generated to the new CA certificate that can be viewed under install ACS certificate option on ACS server but having the following problems
1. SSL is not functioning while internet browser access to the ACS server and going through http instead of https.
2. Wireless clients are authenticated successfully even after the certificate is uninstalled.
Any help on these problems will be appreciated.
Thanks
Best Regards,
Ahmed

Hi Rohit,
Thanks for reminding the HTTPS option under Administration Control on ACS.
I have some doubts pertaining to installation of certificates on Wireless clients though it is optional for Self Generated Certificates but what in case of Mirosoft CA as I tested wireless client authentications even after removing the certificate from microsoft supplicant WindowsXP SP2 having installed the patch KB885453 for PEAP. How the certificate on wireless client works.
Is it mandatory or optional to keep certificate on Wireless Clients as they could able to get authenticated through ACS after removing the certificate.
Thanks
Best Regards,
Ahmed

IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit

Dear all,
we are just trying to install IDES 4.7:
IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
But the installation break with error Message:
Error 5 (Access is denied.) in excution of a "NetServerGetInfo" function, line (233), with parameter (saptranshost, 101).
MOS-01224 Failed to add privileges "NetcbPrivilege SeAssignPrimaryTokenPrivile SeIncreaseQuotaPrivilege to account ....." ....
FJs-00012 Error when excuting script....
Any experience or help from your side?
Thanks in advance
HanseAtik

Hi. First login in your server with user "sid"adm after go to START --> RUN --> CMD
adn execute "R3trans -d" Tell what result .
About documentation read -->
service.sap.com/~form/sapnet?_SHORTKEY=00200797470000065912&
in left corner chek your release like :
"SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)"
After read the document for your release, for example if you use the Oracle on WIn and R/3 Enterprise 4.7 x 2.00 SR1 -->
Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle
Regards.
Edited by: Sergo Beradze on Mar 21, 2008 10:55 AM

ColdFusion 5 - will it run under Windows 2003 Enterprise Server R2?

I currently have ColdFusion 5 running on Windows 2000 and
need to upgrade the os
to 2003 Enterprise R2. I don't know, but I'm guessing, it
will easier to continue using 5
than to upgrade to 7 or 8.

It could be a couple things;
CTC only runs (and / or only runs well) on the specified version of JRE. It doesn't like anything older, it doesn't like anything newer ... the suggested version (1.3.something last time I looked - I don't remember off the top of my head).
CTC takes forever to initialize (in some cases on our Lab stuff, I'm talking minutes ... up to 5-7 MINUTES before anything comes up).
Start it and go have lunch, if it's not up when you get back, downrev your JRE and try again (then go home for the night, and see if it's up in the morning).
If it's still not up, then try it on Windows 2000 server (or a VMware / VirtualPC session on S2003).
If you're running it through something like a Citrix server, take a vacation for a few days ....
This is not one of Cisco's finest software endeavours.
Good Luck
Scott

I dream of running Dreamweaver on a Windows 2003 Terminal Server

I have a "volume" license and attempted to install Dreamweaver CS4 on a Windows 2003 Terminal Server. I get an error message right away indicating that the system does not meet the minimum install requirements, ie XP/Vista.
Adobe volume licensing team verified that it is the correct license for installing on a terminal server, but after one hour of what would a bad nightmare with adobe "no" support (Outsourcing issue, failure to grasp and process the basic error message) I got no where and am having to resort to the forums. I have googled on this and got no where and nothing on the search efforts on this site.
If anyone has an idea of what is going on, bug, wrong install media, please clue me in.
Thanks!

pziecina
Thanks for the information. We do have AppV here and tried that approach. While this gets us past the install minimum requirements, it does not resolve the issue of running of more than one instance at a time, per terminal server, even though our volume license allows for it.

SGA_TARGET SIZE 3GB in 10g Release 2 server on windows 2003 E Server?

Is it possible to increase the SGA_TARGET greater than 3 GB on Windows 2003 Enterprise server(32-bit)?
OS version : Microsoft Windows 2003 R2 Enterprise Edition
Service Pack 2
Bit Version : 32 bit
Computer(SERVER) : Intel(R) Xeon(TM) CPU 3.60GHz
3.59GHz, 15.5 GB RAM
Physical Address Extension
DataBase Version : Oracle 10g Release 2 (10.2.0.1.0)

hi,
As suggested earlier , please go through following notes as it will help you understand the concepts clearly
Note:342080.1. This note talks in detail on how to use more than 4GB RAM on Windows.
Note:225349.1 Implementing Address Windowing Extensions (AWE) or VLM on Windows Platforms
You can not set SGA_TARGET greater then 2.7 G on windows 32 bit machine. Yes , you can have SGA greater then 3 Gb but by using AWE which requires to unset SGA_TARGET and use db_block_buffers instead of db_cache_size.
-Amit
http://askoracledba.blogspot.com/

Install oracle database 9i on windows 2003 server

I have installed a oracle 11g on windows 2003 server, but yo want install oracle 9i same machine, I can?
exist any problem? i think that not possible

859811 wrote:
I have installed a oracle 11g on windows 2003 server, but yo want install oracle 9i same machine, I can?
exist any problem? i think that not possibleOracle V9 was obsoleted & de-supported before Windows 2003 was ever released.
It may work or it may not work.
In any case you are solely responsible for the results.

Admin Console errors in fresh install on Windows 2003 Enterprise.

I have attempted to install 6.1 SP4 on two different Windows 2003 Enterprise boxes. Neither has W2K3 SP1 on them. The installs proceed using a typical install with no errors reported. All defaults were accepted during the install. I can start the server for the Admin and web server instances. I can hit the default page on the web server instance. When I attempt to launch the admin console, I am prompted to logon, as expected. I enter my credentials and promptly get an HTTP 500 error. I check the logs in C:\Sun\WebServer6.1\https-admserv\logs\errors and find the following line:
[26/Apr/2005:12:43:26] failure ( 2596): for host 192.168.175.128 trying to GET /https-admserv/bin/index, cgi_scan_headers reports: HTTP4044: the CGI program C:\Sun\WebServer6.1\bin\https\admin\bin\index.exe did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal termination)
I searched for others reporting similar problems and the closest I could come to an answer was to make sure cookies were enabled on the brower (they are). I get the same error in IE and Firefox, both locally and remotely. After becoming frustrated with one W2K3 server, I decided to try on another. Exactly the same errors.
Increased loglevels in the server.xml provide no additional logging for this problem. Any pointers to a resolution would be most appreciated as I'm about ready to scrap Sun and move to Apache.
Thanks,
Sean

Yes, there appear to be problems where certain old versions of Netscape and iPlanet products can leave old DLLs lingering in the Windows system32 directory.
I'd check for the following files in the Windows system32 directory (typically C:\WINNT\system32 or C\WINDOWS\system32):
libnspr4.dll
libplc4.dll
libplds4.dll
nss3.dll
nssckbi.dll
smime3.dll
ssl3.dll
nsldap32v50.dll
nsldappr32v50.dll
nsldapssl32v50.dll
If you find any of these files, you can try replacing them with a copy from your Web Server install. Don't forget to backup first.
Please report back what you find!

FMIS on Windows 2003 Enterprise SP2 (will it install?)

Hi all,
Might be a dumb question but a client has Windows 2003 Enterprise SP2 R2 and I was wondering if Flash Media Interactive Server will install and run fine on it?
The requirements on the site say Microsoft® Windows Server® 2003 with Service Pack 2 but no about "Standard" or "Enterprise".
Thanks for your help!
Ryan

JayCharles you mentioned installed FMIS on Windows 2003.
I installed FMIS 3.0 on Windows 2003.
CPU is Sempron 3500, 2gig Mem, 1gig ethernet card.
The streaming videos on VOD play fine internally within local lan.
Duration is over 1hour encoded in .flv format
I published swf's to wwwroot on Windows Server on C:\
the VOD's are in on E:\ in .flv format
DSL speed is up at about
Download Speed: 1741 kbps (217.6 KB/sec transfer rate)
Upload Speed: 434 kbps (54.3 KB/sec transfer rate)
Latency: 57 ms
The question is why the sound/video to outside world is not smooth.
Sample is here http://auffant.selfip.org/flvs/poly1.swf
Any suggestions to improve the quality, Where I am missing the boat?
Thanks

After installing Crystal Reports XI on Windows 2003 server with one error..

After installing Crystal Reports XI on Windows 2003 server with one error... REGSVR sapldap.dll error. I had to regsvr it manually. Crystal still didn't run. Found out that Crystal Reports XI will not run until you change DEP to protect only windows program and services. Thanks.

Thank you for sharing your finding. Very much appreciated.
The DEP is a known issue and it is documented in [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Crystal Reports XI was not compiled with the nx flag as it released before Windows XP Service Pack 2 or Windows 2003 Service Pack 1.
As for the sapldap.dll. I'm not sure where this is coming from. I do not see this dll on my install, however it does come with the SAP portal integration kit. So I'm not sure if that is flying around somewhere on that server(?)
Ludek

Why swap size error when I install ides ecc6.0 in windows 2003 x86

Hi,
   I feel very confusion why the installation prompts me that "Swap size are not meeting condition" when I install IDES 6.0 in windows 2003 server x86.
   The ides type: ECC 6.0, MS SQL server 2005, Windows 2003 server x86.
   It's windows, not linux, where is the swap space?
   Could somebody give me a kindly help?
   Thank and thank
Jason

Hi,
In Windows, Paging File Space (Virtual Memory Space) concept is called as similar to Swap space thing in Linux/Unix OS. Both terms are used for virtual memory concept as per OS.
Minimum 20 GB of Paging File spaces is required for the SAP Installation on Windows. So ,allocate them from different drives or from single drive partition of your available Hard disk space.
Follow this path [to change your existing Virtual Memory or Page File size in Windows|http://technet.microsoft.com/en-us/library/cc737315%28WS.10%29.aspx].
Control Panel -> system -> Advanced Tab -> Performance section-Settings -> Advanced Tab -> Virtual Memory ->Change
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Feb 6, 2010 2:36 PM

Unable to install ACS on Microsoft windows 2003 Virtual Server

Hi,
I am trying to install Cisco Secure ACS on Windows 2003 Server Standard Edition which is hosted on a Microsoft Virtual Server, but the installation doesnt go beyond the enclosed screenshot.
Please let me know whether ACS can be installed on a Virtual Server or not.
thank you
Regards
Salim

We have ACS 4.0 installed in our lab systems on VM. Which VM are you running? ACS has been tested on and is only supported on VMware ESX 3.0 and later. Also, you need to have adequate resources allocated to the ACS/Windows VM instance.

Cannot install Oracle 10g rel. 2 on Win Server 2003 SB

Hello,
I cannot install Oracle 10g rel. 2 on Win Server 2003 SB, because when the the configuration assistant installer try to copy the db files, it stop with the following errors:
ORA-24324 Service Handle not Initialized
ORA-24323 Value not authorized
ORA-28547 Connection to Server failed probable Oracle NET ADMIN errorRegards
Siyavuş

You should be connected as a local administrator to perform the install process.
Try to perfom a software only install, then once you make sure the installation was successful, launch the dbca. It is important for you to use a local account to perform the installation and db setup process, otherwise, if you have authentication problems, even if you comment the authentication line at the sqlnet.ora file you will be facing issues that will make fail the assistant, since it is designed to work assuming the user is OS authenticated.
~ Madrid
http://hrivera99.blogspot.com/

Satellite A100-906 PSAA9E: I cannot find drivers for Windows 2003 R2 Server

I found and installed some drivers from http://ru.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=RU
Look at the screenshots of my computer please.
"Device Manager" window:
http://www.disa.ho.com.ua/toshiba/1.GIF
http://www.disa.ho.com.ua/toshiba/2.GIF
http://www.disa.ho.com.ua/toshiba/3-1.GIF
http://www.disa.ho.com.ua/toshiba/3-2.GIF
http://www.disa.ho.com.ua/toshiba/4-1.GIF
http://www.disa.ho.com.ua/toshiba/4-2.GIF
http://www.disa.ho.com.ua/toshiba/5-1.GIF
http://www.disa.ho.com.ua/toshiba/5-2.GIF
How can I solve this problem?
ps: sound not working

Hi
As mentioned above you will not find Toshiba drivers designed especially for the Windows 2003 R2 Server.
But dont worry and dont give up.
The simply Windows XP drivers should be compatible and you should be able to install the Xp drivers on the Win2003 Server OS.
good luck

Cannot install jwsdp-1.2 on Windows 2003 Enterprise Server

Similar Messages

Maybe you are looking for