Cannot Install Latest Driver or Full Menu Program for Laserjet 400 m401dw

Running Windows 7 Pro (64 bit). Downloaded these files from HP: (1) LJ-M401-drv-installer-13198; (2) LJ-M401-full-solution-13198; (3) LJ-M401dne-full-solution-13067.  Each time I ran any of the files, I got about 91% complete at the "preparing to install" stage and then got the error message that the installation encountered an error and I should reboot. I have now rebooted several times and still have not succeeded with installation of any of the files. I have disconnected the USB cable everytime and still none of the files will install.  
There must be some kind of workaround but I haven't found it.  Any help out there?

Hi jleesq,
I hate to hear you are having installation issues.  Please see the below steps that may resolve the issue.  If you are still unable to install, a generic driver can be added to enable print functionality only.  Here is a link that will provide steps for that, however be sure to select HP universal print driver PCL6 instead of 990c, if this process is used.  Link 
Installation steps:
1.  Completely remove any printer components that installed on the PC (check programs/features, device manager, etc.)
2.  Download and save the full feature software from Here
3.  Run disk clean up and disable unneccessary start up programs through MSConfig (see steps below if needed)
3.  Reboot PC
4.  Temporarily disable firewall
5.  Run installation from fresh download with new USB cable (do not connect USB to device or PC until prompted by software)
Selective startup in MSConfig:
HP and I are not responsible for any changes made in system configuration
1.  Click start button
2.  Type MSConfig in search, double click to enter
***If Normal Startup is currently selected, follow these steps:
Select Selective Startup, and then clear the Load Startup Items check box.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
Click Disable All.
***If Selective Startup is currently selected, follow these steps:
Click the Startup tab.
Make a list of the items that are selected. You will need this list to reset your computer startup items later.
Click the General tab.
Clear the Load StartupItems check box.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
Make a list of the items that are selected. You will need this list to rest your computer startup items later.
Click Disable All.
Click Apply.
Click OK. A new window displays. Click Restart to continue.
. Upon restarting your computer, the System Configuration Utility window displays.  
Note: to return to normal startup or predefined selective startup, these will have to be re-enabled through MSConfig after installation completed. HP and I are not responsible for any changes made in system configuration.
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

Similar Messages

  • I cannot install latest itunes to my Sony notebook which is running on traditional chinese windows 7 64-bit, the error message is something like unrecognized windows package, can any one help me or has similar experience? Thanks.

    I cannot install latest itunes to my Sony notebook which is running on traditional chinese windows 7 64-bit, the error message is something like unrecognized windows package, can any one help me or has similar experience? Thanks.

    iTunes 9.0.x is certainly compatible with Win7 64 bit since I use that exact setup on 3 different PCs. Two suggestions for your installation problems:
    1)Download a new copy of the 64 bit installer from Apple then, instead of just running the itunes installer right click on it and try 'run as adminstrator'. In my experience that clears up a world of problems with program installation in Win7 and Vista. This is necessary even if you're already logged in as an administrator.
    2) Try the previous version of iTunes (9.0.3). You can get a copy at http://www.oldapps.com/itunes.php?old_itunes=54 again right click on the file and "run as administrator"
    Good luck, hope this helps.
    Lil

  • Cannot install LAN driver for my "KT6 Delta Series" motherboard

    I've got this motherboard (KT6 Delta Series). Bought it second hand recently and I haven't got the original MSI driver CD. I downloaded all the drivers from the MSI website (http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=474&kind=1) but I'm not able to install the driver for my onboard LAN.
    I just get a yellow dot on the ethernet controller under unknown devices in my device manager. When I try to update driver from device manager by searching the folder where I unzipped the driver, I just get a message saying something like "no driver could be found for this device in the selected folder... will you connect to Windows Update to search for a driver...?". I've also tried to install it the hard way by selecting "from floppy disc" and browse for the "b44win.inf" file inside the "WinXP" folder in the unzipped driver folder... but I stilll get an error message... saying something like "can't find any information of the hardware in the selected folder"... it's a bit difficult for me to describe the messages correctley because not English Windows version.
    I've downloaded both LAN drivers for this card from MSI download site (http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=474&kind=1). Both "Broadcom 5788 LAN Drivers" and "Broadcom 4401 LAN Drivers" and non of them will install on my system. I've also tried downloading from the Broadcom website (http://www.broadcom.com/drivers/downloaddrivers.php). NON of them will install (
    I've just formated my harddrive with fresh Windows XP install... The only software already installed is drivers for my motherboard and AGP card. No other software that can make any conflicts. When I connect a network cable to the onboard LAN the yellow light goes on so it seems the card itself is working.... but where can I get a driver that will install???
    I've also tried connecting another network card (realtek 10/100) and connected my ADSL internett through it... and used the MSI Live Update utility... but still no luck... the only network driver it gets is the one for my reltek card :-(
    Any suggestions???
    I use Windows XP Professional SP2. How do I install the drivers for my onboard LAN???
    Best regard.
    Tor-Atle Kindsbekken

    Quote from: osnavi on 05-November-05, 20:02:09
    "...so my onboard Broadcom 4401/5788 controller thinks it is a 3COM controller instead of a broadcom controller..." Think it shouldn't be possible since basic data should be written in a kind of ROM.  Now, if that could happen, it should be possible to reverse it the same way you did to overwrite that data.
    I belive you are right... but I can't reverse it the same way I did when overwrite the data... because I'm not able to install the driver :( I cannot install the driver at all in Windows XP. In Windows ME it's possible to force the installation of the driver... but it does not work. It moves from unknown devices to network controllers... but it gets a yellow dot... and is not working. Every time I boot Windows ME I get a message reporting that something is wrong with the broadcom ethernet controller :(
    I belive the only way I can reverse it is to replace my harddrive with another... with Windows XP and drivers for my card is already installed on the harddrive... the same way as I did when overwriting the rom file(s) with data from my Asus board... but I can't make such a harddrive when the drivers won't install on my card :(
    I maybe think this also has happend to the onboard Audio controller... and maybe the chipsett also :( The audio controller works perfectley eith the MSI C-Media drivers... but when I run MSI live update... I get drivers for the C-Media device... but also drivers for "VIA AC97" audio controller can be downloaded from the MSI Live Update Utility... The "VIA AC97" is the audio controller on my Asus board... so I belive it has happened here also... and maybe also to the "VIA 4in1" chipset... but this is the same "VIA KT600" chipset as on my Asus board. When updating my Via 4in1 driver, I just get an option to update the inf file. But normaly on "Via 4in1" drivers on other boards I know, there shold be installed drivers for PCI, IDE and AGP. Is it the same way for you guys with this motherboard? Is it only the "Inf file" to update for you guys also?
    What I think is most frustrating here is that things like this cab happen. This can happen to everybody. Many times I've switched harddrive from one computer to another... and I've never experienced anything like this before. This time I was not planing to boot the harddrive at all... just format it... but forgot to set the right boot order... so the harddrive booten... and that's all it takes to "destroy" my board. Shouldn't these ROM files be a littlebit more difficult to overwrite, you think? Why doesn't MSI writeprotect their ROM files or anything... to make them a littlebit more difficult to destroy...?
    Well... I'm still interested in advices on how to "restore" my motherboard data to the original values... and remember... clear CMOS and update BIOS is not enough :(

  • Satellite A40-151: Cannot install display driver from Intel site

    Trying to update display driver on the A40-151. Have downloaded latest driver from Intel which very helpfully states 'You cannot install this driver, please contact your vendor' no more clues.
    Toshiba site only seems to have the 6.13.10.3514 version which is the same as that which came with machine. Am I therefore stuck with no possible upgrades?
    The current driver seems not to be 100% compatible with Directx 9.0c * Sigh *

    Hi
    What Intel graphic card was installed on your notebook?
    Is it a Intel 852GME 16MB-64MB shared memory graphic card???
    I have found nice information on the Intel page and it seems that the graphic card hardware does not support the DirectX9 but only the DirextX7 and DirecttX8
    The graphic driver from the Intel page will not help you.
    Firstly you will be not able to install it because its not designed for the Toshiba notebook usage and secondly the hardware does not support it.
    But I give you one tip if you search for a earlier driver version.
    Some notebooks use the same graphic cards. Try to search for the driver in different notebook series with the same graphic card .
    But the new installation will nothing change. The DirectX 9 API is not supported

  • No admin privilege. Cannot install latest version of iTunes

    I have no admin privileges for corporate laptop. Cannot install latest version of iTunes. No problem with previous versions. Any ideas? 

    Hey Roderick136,
    If you haven't encountered issues previously, then I would try following the steps in this link:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Let us know if that helped resolve the issue.
    Welcome to Apple Support Communities!
    All the best,
    Delgadoh

  • Cannot install latest updates for Bridge and Photoshop CC. Get the following message: Update Failed. The download appears corrupted.  U43M1D207.

    Cannot install latest updates for Bridge and Photoshop CC. I get the following message: "Update Failed. The download appears corrupted.  U43M1D207."
    I have tried to install at different times over three different days with the same result each time. My version of Bridge now no longer shows DNG files except as an icon. The update is supposed to install Camera Raw version 9.

    I had the 204 version of your error using the direct download links proved on this thread solved my problem.. hope you have same success... had to log off/in cloud manager before it showed all apps updated
    https://forums.adobe.com/thread/1825014

  • Cannot Install Graphics Driver for windows 7 64 bit...

    Hi... I cannot find a suitable amd driver setup file for my windows 7 64 bit machine of HP.. Can anyone help??!!

    Hi:
    Please see my reply to your other post at the link below...
    http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Cannot-Install-Graphics-Driver-for-windows-7...

  • Cannot install latest version of i-tunes on computer

    cannot install latest version of i-tunes on my computer

    I am getting issue while downloading iTunes 11.1.3 for my Iphone 4S
    I am successfully able to install the iTunes on the computer, but when I open the software I get following Error:
    "Apple Application Support was not found.
    Apple Application Support is required to run iTunes. Please uninstall iTunes and install iTunes again.
    Error 2 (Windows Error 2) "
    Any help ?

  • It says "can not install the driver: could not find media for this driver"

    I am havin problem with sound in my Compaq presario V6406TU. When i try to install, it says  "can not install the driver: could not find media for this driver", how ever i get a beep for every error message.  In my device manager there is no UAA and in services.msc windows audio is started.
    I have tried almost everything on net but not able to solve this, plz help.

    vendor wrote:
    = No SB0220 support available? SO, IS THERE exactly a model numbered as SB0220 AT ALL?
    I think there is not.
    Yes My Sound Card is exaclty SB0220. I have downloaded the patch and start it. After that I configured the installer and now I have creative drivers. But are they the best for my sound card? After all I`ve pathed the installer and some sort lied it. If the drivers are for my model, why should I path it's
    Yes, I've seen a true SB0220 too on a picture after writing that comment so there is true SB0220 model. But, are you sure your card is SB0220? Did you look the number from a sticker on card board w/ serial number lik MSB022xxxxxxxxxxx where the SB022x is the true model number for your card.
    Why you didn't got drivers installed for your card is, because the installer doesn't support the model SB0220 (supported cards are listed in ctcomp.dat -> this is the file ctcomp.exe patches).
    IIrc, those drivers are the latest ones for your card. If you like to, you can try soft-mod your card the way, you can use Audigy series drivers (which are a bit newer) -> http://www.tech-pc.co.uk/audigy-2.php (i.e. you just use ctcomp.exe utility to patch the installer for Audigy drivers (use these drivers st - http://www.station-drivers.com/telechargement/creative/%20audigy%205.2.0.042.exe) (newer installer maybe can't be patched w/ ctcomp).
    jutapa

  • Install sound driver of hp compaq nx6320 for win 7

    please informe me how to install sound driver of hp compaq nx6320 for win 7

    INSTALLING WIN 7 ON HP NX6320 INCLUDING SOUND
     The biggest hurdle has been installing from CD when the setup file conveniently forgets USB and CD drives.
     Use the HP recovery discs to get XP back up and running, then shut down. If you did not make Recovery Discs use Spotmau or Clonezilla to make a backup image of the recovery partition.
    If you don't have the recovery discs, then shove any XP on there. There's no need to worry about registration because it's only going to be there for about an hour.
    Reboot with Spotmau (my favorite) or Clonezilla and shrink the XP partition. You're aiming for 50GB or thereabouts.
    Reboot XP and using disc manager create and format a volume in the unused space. (D
    Load your Win 7 disc in the optical drive and open in file view, NOT autorun.
    Copy all files and folders to your newly created D:drive.
    Run SETUP from D:drive. Select options to completely overwrite. You don't care about backing up the XP installation.
    In my case, the nx6320 went straight online and downloaded a variety of drivers without my assistance. This included sound.
    For the benefit of other users, I've backed up many of the drivers, including those that could be overlooked: memory reader slot, PCMCIA, 1394 etc.
    I haven't yet made sufficient posts to be able to send PMs to anyone. If people want to PM me with an email address, I'll happily forward the drivers I've backed up.
    Advice on configuration:
    Once Win 7 is running, disc management allows you to resize, create and delete partitions "on the fly".
    Leave your C: partition alone.
    Delete all other partitions (if you backed up the XP recovery partition, now is not the time you need it)
    Create at least three new partitions, A:, D: and R: (My example is 250G drive: 50G for OS on Cystem, 75G for A:Applications, 75G Data 50G R:recovery)
    Now go and do all your personal setups; screen res, colors, power management, network connections etc. and go out for a night on the town while some 700+ updates are downloaded.
    Shut down and reboot Spotmau. Create an image of the Cystem partition to R:Recovery
    Reboot into Win 7 and whenever you install software that allows you to define the location, change it to A:. I had an entire machine crash because of a power glitch. With the Applications partition you can recover Windows, and on A:Applications, you have folder lists to remind you what needs to be reinstalled.
    Once you have a stable running machine, again make an image C:system to R:recovery. If the OS crashes like mine did, a single recovery will put it back in its place with all the right registry entries for the applications installed on A:

  • HT201303 I cannot install a previously purchased app without paying for it again.  I am using the same apple ID.

    I cannot install a previously purchased app without paying for it again.  I am using the same apple ID. I cannot figure out why the system is requesting me to pay for this app a second time. 

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Cannot install latest Catalyst Graphics Driver for w500 under Windows 7 RTM 64 bit

    Hi,
    I cannot install the latest ATI Catalyst driver (9-9_beta_win7_64_dd_CC)) for the ATI Mibility Radeon 9650 graphics card.
    Felet uppstod i programmet med namn: InstallManagerApp.exe, version 3.0.741.0, tidsstämpel 0x4a84bcd2
    , felet uppstod i modulen med namn: ntdll.dll, version 6.1.7600.16385, tidsstämpel 0x4a5be02b
    Undantagskod: 0xc0000005
    Felförskjutning: 0x000000000006f31e
    Process-ID: 0x468
    Programmets starttid: 0x01ca369873fa09f5
    Sökväg till program: C:\Drivers\Graphics\ATI\99\Driver\Bin64\InstallManagerApp.exe
    Sökväg till modul: C:\Windows\SYSTEM32\ntdll.dll
    Rapport-ID: be82a3f1-a28b-11de-bfc2-0022680b4311
    If i run the following command from an administrative command prompt (bin64): atisetup -install -output screen
    The installation will seem to succeed according to the repot but Windows sticks to Standard VGA adapter and the annoying "ATI Mobility Radeon HD 3650 (Microsoft Corporation WDDM 1.1) " Driver.
    Have anyone been able to install the Catalyst driver and get an external monitor to work?
    regards
    Michael

    Hi @dazed1 ,
    I see by your post that you need the drivers for Windows 7 Pro 64 bit. I would like to help.
    I checked the website and there is a Full Feature and Basic driver available for Windows 7 64 bit.  HP LaserJet 1022n Printer Drivers. Did you try both of these drivers?
    I would try and install the preinstalled Windows drivers, if you are having issues using the downloaded drivers on the site with your Windows 7 Pro 64 bit. Run the Add a printer wizard from Devices and Printers.
    You could also plug and play the drivers. Connect the printer to the computer and see if Windows will detect the printer and install the drivers automatically.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Cannot install latest display driver for Vista 32-bit Equium A200

    Hi all,
    I am trying to update my display driver to the latest revision posted for my model laptop on the Toshiba site but on running the setup exe Im returned with an error stating my system is not compatible with driver ver 7.14.10.1461.
    In info clearly states it compatible with an A200 (PSAE2).
    Anyone had a similar problem.

    Hi!
    On the Toshiba website I have founded only Intel display driver for your A200 PSAE2 so I think you have an Intel graphic card.
    Well, I had this problem too and the solution is pretty easy: Go to the device manager => right click on graphic card => Update driver.
    Now you can install the driver without problems.
    Bye

  • "page fault in nonpaged area" BSOD when installing latest driver for M476dw

    I just purchased a Color Laserjet MFP M476dw for use on my wireless network.
    I downloaded the latest version of the driver suite from HP:  LJPro-MFP-M476-Full-Solution-13302
    for my OS Windows 8.1 / 64-bit  listed as version:  10.0.13302.320  --   25 Sep 2014
    I was logged in with a local Administrator level account for the install
     I launched the install,  the printer was discovered and s/w install went along fine until it got to the point of printing the test page ... the test page printed but as the page was printing the computer locked with its (first ever) BOSD:
     "page fault in nonpaged area"
    I powered down, rebooted and after login got an error message that said:
    "HP Printer status and alerts has encountered and error and can not recover ... please restart ...
    windows versoin: Win32NT 6.2.9200.0
    HP Printer Status and Alerts version:  070.040.00169
    I rebooted again and got the same error....
    I launched the uninstaller program with the hopes of just uninstalling the printer status s/w and then reinstalling it,
    but the uninstaller appears to have uninstalled the entire suite of s/w.....
    Before I go at this again, I thought I'd ask for suggestions............  
    I've owned this laptop for 6 months, and it has been rocksolid ... this is the first BSOD I've experienced....
    Thanks for any help!
    This question was solved.
    View Solution.

    so .... having received no suggestions I figured I'd try re-installing withOUT installing the status monitor s/w option.
    After unsellectin that, the rest of the driver package installed, and test page printed then I got a DIFFERENT BSod:
    kernel_security_check_failure
    Event log says:
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x00000139 (0x0000000000000003, 0xffffd000beab77a0, 0xffffd000beab76f8, 0x0000000000000000). A dump was saved in: C:\windows\MEMORY.DMP. Report Id: 031715-9734-01.
    Then next:
    HPLaserJet Service:
    Service cannot be started. System.BadImageFormatException: Could not load file or assembly 'HPTools, Version=8.12.1454.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The module was expected to contain an assembly manifest.
    File name: 'HPTools, Version=8.12.1454.0, Culture=neutral, PublicKeyToken=null'
       at HPLaserJetService.HPLaserJetService.OnStart(String[] args)
       at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
    the printer icon shows up in printers & devices, but will not print a test page..........
    So ............ Uninstalled yet again, then rebooted and installed JUST the basic printer & scan drivers,
    (i.e. the two "required" elements of the package)....
    This works, so at least I can use my printer while I try to figure out the rest of this stuff..........
    I'm pretty disappointed here ............
    Any help would be much appreciated.............

  • Cannot install latest version of iTunes 10.6.

    Running 64 bit Windows Vista Home . Failed to install latest version of iTunes 10.6 with error message "The feature you are trying to use is on a network resource that is unavailable.......click OK , or enter an alternative path to a folder containing the installation package iTunes64msi"
    After using this source in the box below and clicking OK it comes up with another error reading: "the file C:\Users|My name\AppData\Local\Apple Software Update\iTunes64msi' is not a valid installation package for iTunes. Try to find installation package 'iTunes64.msi" in a folder from which you can install iTunes".
    As I could not find this file I then uninstalled iTunes, Bonjour, Apple Software Update, Apple mobile device support, and Quicktime and all related files as instructed from iTunes support page and tried to re-install all again. Unfortunately they all installed except iTunes which came up with the same error messages again.
    Is this an Apple or Windows problem?...........HELP!

    "The feature you are trying to use is on a network resource that is unavailable.......click OK , or enter an alternative path to a folder containing the installation package iTunes64msi"
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Maybe you are looking for