Cannot install Leopard on Intel Macbook

I have an Intel Macbook (2GHz, 2GB RAM, 160GB HD) with OS 10.4.11 installed, and am trying to upgrade to 10.5 with a retail version of Leopard. However, when I attempt to boot from the install disc (which I can successfully do), I cannot install Leopard because of an error message that it "cannot be installed on this machine."
Any help/advice?

pixelinpink wrote:
I have an Intel Macbook (2GHz, 2GB RAM, 160GB HD) with OS 10.4.11 installed, and am trying to upgrade to 10.5 with a retail version of Leopard. However, when I attempt to boot from the install disc (which I can successfully do), I cannot install Leopard because of an error message that it "cannot be installed on this machine."
Any help/advice?
Check out this article:
http://support.apple.com/kb/TS1940?viewlocale=en_US
Is the Leopard DVD a complete retail version (not an update)?
Is your MBP a very recent one? If you you need a very recent version of the install DVD.
Is your HD formatted/partitioned properly for Leopard (GUID, HFS+)?
You may need to backup your Tiger install (SuperDuper or CCC clone is perfect) and then do an erase and install of Leopard on a blank HD. You can always boot into Tiger (as I do) from the backup, and you can migrate from the Tiger BU to Leopard.

Similar Messages

Cannot Install Leopard on my Macbook

Hi,
I recently bought a macbook off ebay due to my ibook dying and not being good enough to run leopard anyway (67MHz off!), eventually got it and I can't install leopard on it! This makes no sense to me as its a core 2 duo 2ghz 2gb ram, definately high enough spec! I put the Leopard Disc in (it's not the retail one but it says "For Mac Computers") and it boots to it, gets to the first screen asking to choose the language, so I pick English...then it has a think...then it says "Mac OS X cannot be installed on this computer". What's that about? I can install ubuntu on it easily, I can even put XP on it easily but it won't have leopard! Anyone got any ideas?

When you buy a Mac from an "official" reseller, it always comes with the system software on a DVD that will only work on that model of computer.
You appear to have a DVD designed to be used on a model of computer other than the MacBook you bought.
The retail version would work. I think you'll have to buy it.
However I do think that the person who sold you the MacBook should have included the system software disks with it.

Installing Leopard on old macbook using the disk of a Macbook Pro

I want to install leopard on my old macbook using the disc i got by my Macbook Pro
specs of macbook wich i can't install leopard on:
Modelnaam: MacBook
Modelaanduiding: MacBook1,1
Processornaam: Intel Core Duo
Processorsnelheid: 2 GHz
Aantal processors: 1
Totaal aantal cores: 2
L2-cache (per processor): 2 MB
Geheugen: 1 GB
Bussnelheid: 667 MHz
Opstart-ROM-versie: MB11.0061.B03
SMC-versie: 1.4f12
Serienummer: 4H627A89VMM
Btw the format of hardisk in macbook is Journaled HFS+ and Tiger 10.4.11 installed
specs of macbook pro wich leopard installdisc i'm using to install leopard
Modelnaam: MacBook Pro
Modelaanduiding: MacBookPro3,1
Processornaam: Intel Core 2 Duo
Processorsnelheid: 2.2 GHz
Aantal processors: 1
Totaal aantal cores: 2
L2-cache: 4 MB
Geheugen: 2 GB
Bussnelheid: 800 MHz
Opstart-ROM-versie: MBP31.0070.B05
SMC-versie: 1.16f10
Serienummer: W88037KYX91
(on macbook pro leopard succesfully installed)
I don't see the problem and can't find it anywhere, hopefully you know it.
Thanks,
Niels
Message was edited by: Klapschaats

Klapschaats,
Unfortunately, the installation media that comes with your Mac will only work with that particular machine. These installation discs are not the same as a retail copy of Leopard. The retail installation disc can be installed on any supported machine. The installation media that came with your Macbook Pro for example has data on it meant only for that machine. Think of it also as something like an "OEM" disc for Windows when you purchase a machine from Dell. That particular installation disc is licensed only for that machine and contains files specifically for that machine.

Cannot install PSE6 on my MacBook Pro

I downloaded PSE 6 but cannot install it in my MacBook Pro, running OS X 10.5.6, and it gives me this message:
This software cannot be installed because the file system of the OS volume is not supported.
so, can anybody help me please? Thanks.
Abdullah

response here:
http://www.adobeforums.com/webx/.59b70eb9/5

Cannot Install CS6 on my MacBook Pro.

I cannot install CS6 on my Macbook Pro.
It says to re-install but I can't un-install and some components may be missing.
Error Code: 1
Please help, in desperate need.

What Mac? What version of OSX? Exit code 1 basically means that your system is not compatible at all. As a start, run the Creative Suite Cleaner Tool and try again - assuming you are on a supported system.
Mylenium

I cannot install downloadassistant to my macbook pro

I can download AdobeDownLoadAssistant, but cannot install it to my MacBook Pro. I read the discussion forum, but that did not help. I get error 3010, which I don't see listed in any of the discussions. I am trying to download a trial version of Adobe Pro XI.

Can you please post a screenshot of the error message which you are receiving?

How do install Leopard from intel to ppc by Firewire?

Can anyone tell me how to install Leopard from my intel macbook to my older ppc? When I try to install from firewire it says that the drive is going to GUID and non-bootable. My DVD drive on the PPC isn't good enough for the Leopard DVD. Any suggestions are appreciated.

I'm not commenting on whether the type of Mac is compatible with the Leopard install.
I'll offer suggestion for the firewire install. The objective is to take the Leopard DVD and transfer in some way to a firewire drive to be able to boot a PPC Mac and complete a Leopard install to the PPC Mac.
How? Take a firewire external drive and partition it in two. One for your data and the other (7.2 gigs) max, for the ability to restore the Leopard DVD to that smaller partition. Once restored you'll be able to boot(using system startup control panel) and install Leopard to a PPC Mac.
The rule to follow is to use APM ie Apple Partition Map to boot PPC Macs. GUID mapping is for intel Macs. You use options within Disk Utility ti select which way to go. You cannot have both on one firewire hard drive. I use two firewire hard drives: one APM and the other GUID.
How to setup the small partition? Connect firewire drive to your PPC Mac. Open disk utility. Create your two partitions(remember when you do this the drive is formatted and all data is gone, so backup first). Remember to use option and select APM, although on a PPC Mac it should be by default and ditto if on an intel Mac for GUID. Once the partitioning is complete, select Restore and while using the left hand column(just read the instruction in the disk utility window) and assuming you now have the Leopard DVD on the desktop , drag the install OSX section from the left hand column to "source" and then drag the Leopard small partition from the left hand column to "destination." Wait 20 minutes and you are completed. Now you can boot from the firewire drive and install Leopard to a PPC Mac.

I cannot install updates on my macbook and itunes no longer works.

I have a macbook that is 3-4 years old. Recently it stopped booting up at all, however was able to restore using original discs. However, my itunes doesn't work and I cannot install any updates at all. I can download the updates from apple, however, once finished it won't install. The installer utility pops up onthe task bar for about 1 second then disappears. I get no error messages or anything. Same thing for when I try to open itunes...the icon bounces once on the taskbar, but nothing opens. Nothing happens. I think the hard drive may be going bad. Can anybody help me with this? Model info below...
Model Identifier: MacBook2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MB21.00A5.B07
SMC Version: 1.17f0
Serial Number: XXXXXXXXXXX
Sudden Motion Sensor:
State: Enabled
<Edited by Host>

If that was the only machine you've installed it on, just throw the disks in the new machine and install away. All of Adobe's CS and CC software licensing allows you to have it installed on two machines.
If it's older CS software, you would need to install it on the same kind of OS (Mac or PC), but CC software doesn't have that limitation. If you're a CC subscriber, just download the CC Desktop App and install from there no matter which OS you have.
If you get a "Maximum Activations Reached" error, you'll need to call Adobe to have them clear that issue up if the old computer is completely un-salvageable. If you can still fire it up, just open DW on the old machine and choose Help > Deactivate before installing on the new machine.

Install Leopard on a Macbook with Windows

I recently purchased a used 2007 Macbook and it came with only one partition and Windows XP installed. I am new to the Mac world and unfamiliar with BootCamp.
How would I go about partitioning and installing Leopard on this machine without killing the XP install?
Thanks.

Bummer. I was hoping BootCamp came with some sort of partition manager. So is the recommended course of action to fdisk into separate partitions then install Leopard and reinstall Windows?

Cannot install Yosemite on my Macbook pro 13"

13" Macbook Pro Aluminum model 2.4 processor speed 4 gigs ram 250 gig HD, on IOS 10.6.8. I have read the pre reqs for Yosemite but when im bout to choose which HD ( which is obviously one ) it says "You cannot install Yosemite here", and thats it. Ive checked about 5 other posts relating to this issue but seems every answer that is given is a run around.
can't install yosemite on my OS X 10.6.8 (i get a warning that it cannot be installed on this pc)
^^
This was the thread I read that was absolute no help at all. From what I've read, my Mac is able to install it, but for some reason it won'

What Mac? What version of OSX? Exit code 1 basically means that your system is not compatible at all. As a start, run the Creative Suite Cleaner Tool and try again - assuming you are on a supported system.
Mylenium

Installing Leopard on a MacBook Pro

Hey guy, Vinny again. Im also thinking about getting Leopard for my MacBook Pro. My book is pretty new and i just want to be sure everything will setup ok and i wont screw anything up. Here are my system stats:
Processor:Intel Core 2 Duo- 2.4 GHz
Memory: 2 GB
Hard Drive: about 120 Gigs left
If you need any other info let me know and ill pull it up. --Thanks again, Vinny

Hi Vinny.
As they always say, "Prevention is better than cure" and in this case, regardless of how new and how little stuffs (apps, your own work, photo, music, etc etc) or how much lots of stuffs are on your computer, back them up. Use an external FW drive to clone your entire system (using SuperDuper) so should anything happens after the Leopard upgrade, you have something to fall back on immediately.
(Note: When formatting your ext drive as bootable, made possible by SuperDuper's clone, be sure to format your ext drive in GUID partition - http://gizmodo.com/gadgets/apple/leopard-disk-utility-format-issue-screws-with-t ime-machine-but-theres-an-easy-fix-316573.php)
When you finish cloning/backing up your current drive, go ahead and make the Leopard leap; Then you can also copy files from this back up drive to your new system.
If you can, you can invest in another drive for use with Time Machine in 10.5 SuperDuper is currently not yet fully compatible with Leopard.
Cheers

Install disc won't re-install Leopard on my Macbook

So, I recently upgraded my Hard Drive in my Macbook. After I upgraded, I thought it would be cool to have Windows XP on my Mac also. So I partition 20 gb of my Hard Drive off for XP. I ran boot camp to install XP and I kept getting an error. This left me with an empty partition of 20 gb on my Hard Drive. I read many posts on here and I decided that the best thing to do was to re-install Leopard completely and start over, fresh and clean. Well, I put my Leopard install disc into my dvd drive, and when the install starts up, I get an error message that says, "Mac OS X can not be installed on this drive." Also, the install disc will not eject, even before the install starts. My hard drive is completely blank right now, and I have no idea why my install disc won't work. What should I do?

Open Disk Utility again (from the installer DVD), click on the drive's name as described in the previous post, & click the blue "i" button to get the disk's info. Copy that to a reply in this thread so we can see it. Or just note the "Partition Map Scheme" info, which should say "GUID Partition Table."
If not, you did not succeed in repartitioning it, perhaps because you did not click the "Apply" button or something.
If so, make sure you are using the installer disk that came with the MacBook & not some other model-specific installer disk.
BTW, you can never eject the DVD if you have started up the MacBook from it, so that much is normal behavior. To eject the DVD, you must restart from some other boot volume.

Installing Leopard on a Macbook with a Windows partition

I've heard that if your Macbook is partitioned with windows, you will have problems when you try and install the new Leopard operating system. Is this true? Can I just simply place a leopard install disc into my computer and get the new operating system without worrying about anything?

tamtam10 wrote:
I've heard that if your Macbook is partitioned with windows, you will have problems when you try and install the new Leopard operating system. Is this true? Can I just simply place a leopard install disc into my computer and get the new operating system without worrying about anything?
It's nonsense. I installed Leopard on my partitioned and Boot Camped drive with no issues or problems.
Bob

Installing Leopard on New Macbook

I recently purchased the new Macbooks that came with Snow Leopard, but because they are going in a school enviroment and our software compatibility issues, I need to install leopard on them. I can get the device to boot and show me the retail install cd, but when I click the cd for install it freezes.
I suspect that the device is booting possibly in 64-bit mode and know I can hold down 32 to get it to boot in to 32-bit mode, but when I do that it wont then let me hold down the option key to access Boot Manager.
Any ideas or insight would be greatly appreciated...
Background:
We recently purchased 25 of the new Macbook for distribution in a school enviroment. When the devices arrived I attempted to do a NetRestore from our Snow Leopard Server with the Leopard image that works on the older macbook models, but when it comes to this model (no firewire edition, suck) it gets a kernal panic error. So I was going to do a manual configuration on a single one of these devices and then use the image utility to create a new image, I could hopefully NetRestore with.

So,
Etresoft was correct.
After some troubleshooting and a call to AppleCare, some discoveries were made that were challenging. I was forced to install Snow Leopard and check the compatibility of our Education software to see if it would run without a problem and it did (thank God).
The next obsticle was creating the .nbi of the image off the "New Macbook" that no longer supported "Target Disk", with some discussion on the phone with the Apple Rep we both concluded this would only be possible if I were to install Snow Leopard on an external drive and then install the Snow Leopard Server Admin Tools and boot to that. Once that installation was complete, I was able to boot from the external and use the Image tility to get the new image off the device and moved over to our Snow Leopard Server.

I cannot install Leopard 10.5 onto my PowerMac G5 (dual processor)

I have a new retail full install DVD of Leopard 10.5 and cannot install it to my PowerMac G5 (dual processor). I bought a new disc, thinking it was the original. Nothing! I bought a new SATA 1tb hard drive... Nothing! I have reformatted until I can refomat no more. I have tried to "Safe Boot", holding down C, Option, Shift, etc... Can someone tell me what to do?

Hmmm, with the Leopard Install Disc in use Disk Utility to Verify the DVD, does that come out OK?
If so ...
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
   2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
      *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
   3. Click the Erase tab.
   4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
   5. Select your Mac OS X volume.
   6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion hopefully you'll be able to install.

Cannot install Leopard on Intel Macbook

Similar Messages

Maybe you are looking for