Cannot install LR 3.5 update - error 1152

Hi,
I've been trying to update my LR to ver. 3.5, but as soon as run the setup file, I this error.
I've tried to extract the setup file to my desktop first, but the same error appears.
I've updated LR several times in the past without any problems, but with the v3.5, I cannot.
I am using Windows 7 Ultimate 64-bit SP1.
Any suggestions?

Hal,
Thanks for the suggestions.
I have tried re-downlaoding to a different location. but the same error occurs.
Runnnig the MSI from extract directory did not help.
Tried to "run as administrator"....did not help.
20 GB free on C-drive.
Really strange, specially because all previous updates went OK.
The only thing I've noticed is that in "C:\Users\Carsten\AppData\Local\Temp" folder there is not sub-folder named "{FD.........". (as referred to in error message)
Further help will be much appreciated.
Carsten

Similar Messages

  • "You cannot install Mac OS X Update on this volume."

    "You cannot install Mac OS X Update on this volume. This volume does not meet the requirements for this update."
    This is the error I got when I tried to update my Macbook from OSX 10.5.6 to 10.5.7.
    I downloaded this file (http://support.apple.com/kb/DL826)
    A quick Google search suggested I get this one instead (http://support.apple.com/kb/DL827) The "Combo" update.
    Well, the 10.5.7 Combo Installer didn't help either.
    My friend suggested I try 10.5.8
    Same error message again.
    I really need to get at least 10.5.7 for software ASAP. I plan on getting Snow Leopard next month or so, but I really need at least 10.5.7 in the meantime. Any ideas?

    Some things I've tried:
    - I ran a Verify Disk in Disk Utility, and it said there are no problems.
    - Update Logs haven't shown any errors, nor has my computer ever tried to download the update and failed, according to the log.
    - I tried checking updates on a different account, no luck there.
    So far, that's all I've tried. Some of the other solutions seem more drastic, and so I'll leave those up to the skilled Tech Support guys on my campus, I've got an appointment tomorrow.

  • I Cannot install itunes because of an error (-42404) Can anyone offer a solution please?

    I cannot install itunes because of an error (-42404) Can anyone offer a solution please?

    A search of the forums would be a good place to start.
    Also, check out the "More Like This" section to the right.
    Amazing what a little effort put forth will reveal.

  • I am unable to install the creative cloud update - error 43 comes up at around 77%

    I am unable to install the creative cloud update - error 43 comes up at around 77%. I'm a relatively new user.

    WIthout proper system info and the detailed error report nobody can say much. Most likely you run out of disk space.
    Mylenium

  • 10.5.8 update_'You cannot install Mac OS X Update on this volume.'

    You cannot install Mac OS X Update on this volume. This volume does not meet the requirements for this update.
    This is the message I get when I click on the hard drive I wan to install it on, I have two hard drives, neither want to work with it. the one with the osx 10.5 has 63 gb left and the empty one has 102gb left. Why is it doing this/ what should I do?

    If you're not using the combo updater, use it instead.
    (55808)

  • Cannot Install 10.5.1 Update

    Hello,
    I have installed After Effects CS5.5 for Mac on OS X v10.7.5.  I downloaded the After Effects CS5.5 10.5.1 update, and I cannot install it.  The update installer vaporizes/quits/crashes before it can even appear in the Dock.  I went looking for a crash log in the Console but did not find any trace of what did (or did not) happen.
    Can the After Effects CS5.5 10.5.1 update be installed on Mac OS X v10.7.5?  If so, where should I be looking to resolve this vaporize/quit/crash when I launch the 10.5.1 updater?
    Thanks for reading!

    Make sure that you downloaded the correct updater. See this page for details:
    http://blogs.adobe.com/aftereffects/2011/06/after-effects-cs5-5-10-5-1-update-fix-for-text -entry-bug-and-serial-number-problem.html
    Note that there is only one bug fix in this updater, so unless you are working with large amounts of text in a single text layer, you may not even need to apply this update.

  • You cannot install mac os x update combined on this volume

    Hi all,
    I need your precious help. I have install in my imac leopard 10.5.7 and last night I tried to update for 10.5.8, however the software update didn't identify the new update.
    After that I download the update from Apple website but I couldn't do the update because of this message: "you cannot install mac os x update combined on this volume. This volume does not meet the requirements for update".
    Could you please help me?
    Thanks,
    lG

    lgcustodio wrote:
    I ran the disk utility and saws verify disk ok. I did the same process for repair disk permissions and seems to have problems.
    These warnings are accurate but according to Apple can safely be ignored. See Mac OS X 10.5: Disk Utility's Repair Disk Permissions messages that you can safely ignore. IOW, They are not normally problems.
    I check the volume scheme but I don't have any partition
    You do have partitions & a partition scheme. To check what the scheme is, click on +the drive itself+ in the list on the left in Disk Utility. It will probably be identified as "298,1 GB WDC WD3200AAJS-40VWA0 Media" or something very similar. If it contains the startup disk, it will be the first item in the list. It will have one or more named volumes indented under it, such as "Macintosh HD."
    When you have clicked on the WDC drive instead of a volume name indented under it, you should see seven items of information about it at the bottom of Disk Utility's window, to the right of an icon representing the drive. The info is in two columns. The last item in the rightmost column, below the S.M.A.R.T. Status (which should say "Verified"), should be "*Partition Map Scheme :* " & be followed by the scheme type. It should be "GUID Partition Table."
    If you don't see the seven info items after selecting the drive, it may indicate a problem that needs attention, but I suspect that you just haven't looked in the right place for the info....
    As for the 'cannot install' message, make sure that you have downloaded the right update, that it is not the server update version for example. You may need to download it again, discarding the first download as somehow defective.

  • Cannot install Touch ID after update 8.1.3 in iPhone 5s.

    Cannot install Touch ID after update 8.1.3 in iPhone 5s. In trying to install unlocking my phone is refused, as is allowing access to iTunes and App Store. Before updating I used Touch ID without any problem.

    Restore iPhone with iTunes on computer. If after the computer Restore there are still problems, iPhone 5S has Warranty, make Genius reservation or set up service and take or send iPhone to Apple for resolution.

  • Safari cannot install profile due to unknown error

    hello
    I was browsing a couple of sites today, and during browsing, i received a message saying "safari cannot install profile due to unknown error" , i am not to sure which of the sites gave this message, and browsing over them again does not give this message. I am using an iPad 2 16gb wifi. when going to General -> Settings , i dont have a profiles tab, so am not sure what profile it was trying to load. i also have nothing changed in my settings that i can see, should i be worried, that there is some spyware or malware loaded?. can an ipad get any kind of bad things through a profile install?. i have looked online but cannot see an answer.

    You can not download items from the internet with an ipad, you can download from the app store or from itunes or some cloud services (dropbox) but not from browsers, there is an Iphone app for we transfer in the app store that appears that it can be used on an ipad as well.
    You may want to take a look, its free

  • Internet Explorer 9 not showing as not installed when using Windows Update - Error: Code 9C48 Windows Update encountered an unknown error.

    I built a few new Windows Server 2008 R2 with SP1 VMs today and ran into a problem where Windows Update is not detecting the fact that Internet Explorer 9 is already installed. Internet Explorer 9 keeps showing up as an available update when
    using Windows Update. When I try to install it as a test I get the error message: Code 9C48 Windows Update encountered an unknown error.
    My normal build procedures include applying all the patches for the OS prior to any other work on the servers. The way I like to do the patching is to do every update other then IE9 in the begininng and once all the other updates have been
    completed, install IE9 and then patch it if there are updates available. I followed this procedure on every build for the last year and I have not run into any issues until today. The only difference today is the latest patches that were released yesterday
    April 10th, 2012. To test the theory that it may be one of the latest patches, I reinstalled Windows from scratch making sure to format the disks and then I installed IE9 right after the OS install without any other updates. Once the
    server was rebooted, I checked Windows Update and Internet Explorer 9 still showed up as update (Not the Cumulative Update which normally shows up after an IE9 install) and yes, I did make sure to click the 'Check for Updates' link before I looked just
    in case. My next test was to patch a couple of the servers I had built prior to April 10th, 2012. Those servers did not have any issues with the latest updates and they are not experiencing the same behavior as the newly built servers.
    I ended up comparing the IE9 Version on the cleanly install OS (No updates were installed except IE9) and the servers I built last week which were patched. The versions are exactly the same.
    My findings above lead me to believe that there is a problem with the latest IE9 install package (which includes the latest cumulative update) and the Windows Update detection component.
    I guess I am looking for someone to report this up the chain to get this fixed so no one else runs into this problem. I know in some cases we may not be able to see additional IE9 updates until this is resolved.

    I just started having the same problem.
    I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
    I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
    I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
    I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
    Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
    I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
    I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
    I proceed to kick off the 100+ downloads needed before i left and left the console up.
    When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
    an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
    I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created.

  • Cannot install neither Raw combatility update 3.9 nor 3.10

    Hi Folks,
    I´m running OSX 10.6.8 on an iMac and cannot open the data of my Sony Nex 5n. The raw combatibilty updates doesn´t help because they can only be installed if aperture 3 or iphoto 11 is installed.
    This support document
    http://support.apple.com/kb/HT3825?viewlocale=en_US
    claims that there is system-level-support for my camera after installing the Digital Camera RAW Compatibility Update 3.9.
    But this update I cannot install (see above)!
    Any hints what´s going wrong? – Thank you!
    Kind regards
    Karsten

    fane_j wrote:
    RRRobbie wrote:
    they can only be installed if aperture 3 or iphoto 11 is installed.
    Where is this information from? I don't see anything in RAW Camera Update 3.10 that would require iPhoto 11 or any other application.
    I tried to install it and get this information (sorry, it´s a german system)
    fane_j wrote:
    Be that as it may, iPhoto 11 (iPhoto v9) is bundled with Snow Leopard. (There's an iPhoto v9.2.2 update for it.) If, indeed, the RAW Camera Update requires it and you have removed it, you can install it from the SL Install DVD, and then install the RAW update.
    iPhoto wasn´t bundled with Snow Leopard, it was a separate purchase included in iLife 11. Today it is only to buy in the Mac App Store.
    fane_j wrote:
    Alternatively, download the update, then use Pacifist to install it yourself.
    That might damage my system, I have to work with. Thank you.

  • I cannot install the latest software update on my iPad - why?

    please advise why I am unable to install the latest software update on my ipad

    hi i think we want some information about your device
    but those might be problems
                1.you ipad is updated to latest version
                2.low space in disk drive
                3.your device isnt a original one
    send some pics of error massage or send the error massage i will be use full to solve your problems
                                                                            regards

  • I cannot install quick quicktime... error states that quiktime X is already installed, when I do a search it is nowhere to be found

    I cannot install quicktime... error states that quiktime X is already installed, when I do a search it is nowhere to be found.

    Click here and install the software.
    (58688)

  • Cannot Install SCVMM 2012 - Hardware Management Error (WinRM)

    Hello All,
    I am trying to install SCVMM 2012 on Server 2008 R2, However, when installing, I met the following error:
    I tried using the command "winrm qc" but "Access is Denied" error is shown.
    My account is a domain user which has been given local administrator privilege.
    Any help is appreciated

    Brian,
    Why we can't run the SCVMM installation using Local administrator account ?
    From the Tech net : http://technet.microsoft.com/en-us/library/gg610656.aspx
    To start the Virtual Machine Manager Setup Wizard, on your installation media, right-click
    setup.exe, and then click Run as administrator.
    For the WinRM errors , isn't this something to do with UAC , Can you use an elevated command prompt and run  "winrm qc" if you still get the access denied error , please check that administrator account has a non blank password
    WinRM needs to be fixed prior to go for VMM installation

  • Cannot Install Dreamweaver. Adobe Installer Error Code: 87

    I just purchased my Creative Cloud membership. When I go to install Dreamweaver, an Adobe Installer error box pops up saying,
    "We've encountered the following issues: Another installer is currently running, which must be closed before installing this product. Please close other installers. (Error code: 87)."
    However, I don't have any other installations running. Please let me know if anyone knows something that may resolve the issue.
    Thanks,

    Moving your post to the Creative Cloud Download and Install forum. The experts here are better placed to help you.

Maybe you are looking for