Cannot install Mac OSx to harddrive

cannot install Mac OSx to harddrive

Plus what model of MBP are you attempt to do this install?
What are the hardware specs on it?
Allan

Similar Messages

Cannot Install Mac OSX on this Computer!! HELPPPP!

Well here is the situation. I have a PowerMac G4 (Digital Audio). i had it upgraded a year ago to a 1.53Ghz G4 Processor, 1.5 GB Ram, I have a 160GB HD, and a 40GB HD. All the firmware is up to date. i went to Install leopard and the OS didn't recognise my system configuration. i called Apple and well all i got was " That I basically made a custom PC and Leopard will not recognise the Hardware and configuration. "Cannot Install Mac OSX on this Computer" was the message I got
So I had to revert Back to Jaguar and I'm hating it. Any help on this one, or should I cut my loses and sell Leopard?

am currious too as i have a g4 dual processor 800 and am wondering if it will install on it. the dp has plenty of hp to run it. if yours is showing as a 1.5 in profiler should install. but one glitch could be many sonnet upgrades do a trade off and a faster processor but they down clock the fsb speed to get it. check and see if fsb is at least 133. i do pc service for a living and love mac for my own use but apple is a bit arrogant on it's software as to install specs and not offering a uninstaller option. on that windows is a lot more friendly and flexable.

Cannot install mac OSX lion v.10.7 on mac mini

I try to install mac OSX lion v.10.7 but they say u need atleast 2GB of memory in HD Machintosh, but i have more enought memory already.

Hello, perhaps you're confusing RAM Memory with Disk Space?
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

Cannot Install Mac OSX upgrade from 10.5.1 to 10.5.5

Initially tried Software Update but this failed to complete. Stalled on "Configuring Installation".
Used Disk Utility to repair permissions.
Tried to manually update to 10.5.5 with downloaded file but this also failed, message:
"You cannot install Mac OS X Update on this volume. This volume does not meet the requirements for this update."
Should I reinstall 10.5.1?
(Apple CN 108449442)

Derek Miles wrote:
Initially tried Software Update but this failed to complete. Stalled on "Configuring Installation".
Used Disk Utility to repair permissions.
Tried to manually update to 10.5.5 with downloaded file but this also failed, message:
"You cannot install Mac OS X Update on this volume. This volume does not meet the requirements for this update."
Should I reinstall 10.5.1?
(Apple CN 108449442)
Did you try to install the complete combo update (601 MB) or the smaller one (310 MB)?
You need the larger one. The smaller one is only for updating from 10.5.4

HELP PLEASE cannot install Mac Osx

hey I really need help please!
I tried to modified my dock using my resources folder in the dock components but I surely did something wrong cause when I tried to click on time machine, it said that I need the right osx version.
So I restarted my computer but it just wont start, i see the spinning gear over and over again. So i decided to reinstall mac os x tiger and to reupgrade to leopard afterwards.
I restart m computer, hold C, get to the install process and when I need to choose my volume, I choose my HD, the one in the iMac but its says cannot install on it because of a Volumecheck problem...
I really need to reinstall it without loosing my data on it I have some important photos for my work, I NEED THEM!
HELP!

Hello and welcome to the Apple boards
If you have been using Time Machine, you can restore your system from it using the Leopard DVD and following the instructions on this link:
http://www.peachpit.com/articles/article.aspx?p=1091577&seqNum=6
You might first try booting from the DVD and repairing your HD first. The tools are in the Utility folder on the DVD
You boot into the DVD by starting the computer and holding down the "C" key.
Hope this helps a bit.

Need Urgent Help Cannot install Mac OSX 10.6 on 20" intel imac

I recently purchased an intel imac an intel mac pro from an auction. When i purchased the macs i was told that no operating systems will installed and i would need to purchase and install mac osx10.
I purchased the mac osx10.4.6 family pack from the apple store online.
i put the new disc in the mac and restarted holding down c.
for some reason nothing happens and i get folder with a question mark.
I have tried this several times but nothing seems to work.
I am a complete novice with macs and migrsting from pc.
thanks

You cannot buy a retail version of Tiger that will install on any Intel Macs. You must have the original installer discs that came with the computer. You should not have purchased the computers without them nor should they have been sold to you without them.
The only option you have is to call AppleCare or go to a local Apple store and see if you can purchase the discs needed for each computer (there are different versions for each model.)
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Cannot install Mac OSX Snow Leopard on Macbook Pro Unibody with a new SSD

Hi, I just bought a SSD (OCZ Vertex LE 120GB) to replace the stock SATA HDD. The problem is that the Mac OSX installation fails. I tried a lot of times with no success. Both clean install from DVD or restoration from a Time Machine backup fails.
The problem doesn't happen if I put the same SSD into a PC to install a Linux or Windows. I've read something saying the problem to be at EFI 1.7, SATA bus and even SATA cable in the Macbook Pro. Can anyone help in this issue?

IgorOzz wrote:
Hi OrangeMarlin, thanks for answering and trying to help me in this issue. Well, The SDD is well formated by Disk Utility and GUID partition as well. I tried to clone my HDD to the SDD by using the Disk Utility RESTORE option. By doing this I could boot up from SDD but somethings didn't work well (iPhone crashed at every start), Finder sometimes, and other apps...
Maybe the disk utility restore option isn't the best way to do that. I'm gonna try the following steps:
- Carbon Copy to clone my HDD to SDD;
- Update SDD FW to the last one (but I need to install it on a Windows machine first);
- Downgrade EFI FW back to 1.6 (not sure if I'll proceed to this step).
I was thinking about SATA bus and cables because I've read some issues pinpointing to this as the culprit, since the Macbook's SATA wouldn't be able to handle 3Gbps SATA II speeds.
Now, a little question: Why you say to be not recommended to install the new drive internally? What if, after using the SSD or HDD for a while and the system crashes I need to reinstall Mac OSX? I think it's supposed to be installed from the scratch by the DVD installer. Isn't it?
Again, thanks... and waiting more replies...
Do one step at a time, and I highly recommend not "downgrading" the EFI. The unintended consequences might make you throw your MBP out the window.
Yes, use Carbon Copy Clone. Then try to boot from the cloned drive. Hold Option at startup, and it will give you a choice.
If it works, then put it in your MBP. If it doesn't boot, then go to step two, repeat clone, and try again.
My 2010 MBP runs at 3Gbps. I think prior to the 2010 models, Apple had not qualified any drives, other than the ones they put in the MBP's, that could work with 3Gbps drives. You may have one that doesn't.

HT203322 Cannot Install Mac OSX Snow Leopard on MacBook 10.5.8 because Mac Hard Drive has Time Machine on It?

I have an old MacBook (2006?) with OS 10.5.8 that I would like to upgrade to Mac OS X Snow Leopard, which I have on DVD. When asked to select what disk I would like to install the upgrade to, my only option is the Mac Hard Drive icon with a big yellow triangle/exclamation point saying I cannot install there because I am running Time Machine on that disk.
I have run searches using "Find" for any vestige of Time Machine left on my computer. I have deleted the icon from my dock. I have tried to run disk utility to delete just the Time Machine but can't target just that. I have rebooted after each of these steps. Nothing changes.
It is Kafka-esque because I need to upgrade my OS so that I can upgrade my browser so I can read the question section of apple.com related to upgrading to Snow Leopard.
Thanks for any help you can give.

Thanks, seventy one. I do have everything backed up everything to an external hard drive, plus the most important stuff also on Dropbox. Given the age of this laptop, and given that I've been the sole owner and almost the sole user, I'm mystified as to why/how Time Machine is on my internal hard drive. I agree with you that it would defeat its purpose to back up files to the computer they're already on! It reminds me of the time a friend of mine put a bucket under his sink because there was a big leak in the pipe that was splashing into the cupboard. When the bucket was full, he took it out from under the sink and poured it down the sink to empty it. Ooops. Using Time Machine to back up files on the same computer it's installed on feels the same to me.
It's interesting because I've found versions of my question posted by many other users, but I can't find an adequate response. Mostly, there are responses that don't directly address the problem, which in turn are rated by the petitioners as 50% or so helpful.
I'm not sure what I'll do beyond searching a little more on the web and sleeping on it. In all seriousness, though, thank you for your help and suggestions. These Apple Help Boards are amazing, in large part owing to people like you who respond to strange plaints like my own.

Cannot install Mac OSX v10.5 Leopard.

After booting up with Leopard DVD, I get an error message saying that the OS cannot be installed on this computer. I have enough memory. System REquirements state that I need 867MHz, but I was told that having Dual 533 would be okay. Does anyone know anything about this?
Thank you!!
carol

LowEndMac has a page related to this.

I am trying to format my macbook pro hard drive and every time I get a window that says "Cannot instal Mac OSX on this Hard Drive." What do I do?

The only options it gives me is to restart or restore from back up which isn't what I want to do... HELP?!

Provide information relative to the issue like which MBP model, what OS is running on it, what OS are you trying to install on it and where did you get the OS installer disk from then perhaps someone could help.

Can not install Mac OSX Update Combo10.4.5 PPC

I have a clean installation of Tiger on a Power Mac G4 (AGP graphics) with Sonnet 1 ghz processor upgrade, updated to 10.4.3 by running Software Update. No other updates available at this time.
So I downloaded MacOSXUpdCombo10.4.5PPC.dmg and it stops at "Select a Destination."
"You cannot install Mac OSX Update Combined (Power PC) on this volume. This volume does not meet the requirements for this update."
I must have installed this update previously, to get to 10.4.6, to install Adobe CS3 which REQUIRES 10.4.6.
Now I can't figure out how I got this update installed - sorry if this has been posted previously.
This isn't my main machine, thankfully, but I use it as a spare in the studio to transfer images to.
Can anyone help me get this OS updated to 10.4.6?
I don't have the original processor, so re-installing it isn't an option.
Thanks.

No, I wouldn't ignore them, I think we really have more messed up than just this, and if any of these steps fix it, we'll likely need new downloads.
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
If all the above fails, then it appears to be time for an Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

Problem installing Mac OSX on my new MacBook hard drive...

Hi,
i am beside myself again...(i just visited my local Genius bar this afternoon). Any help would be most appreciated! :o)
i purchased a 2.5 inch SATA Fujitsu 120GB laptop hard drive for my new MacBook. Followed the awesome* instructions on "how to replace/upgrade hard drive", and took out the original Toshiba HD. What the instructions* failed to mention was that i would eventually need to use a Torx screwdriver (star-shaped) to remove the caddy/carriage from the Toshiba HD. Got that the next day and replaced the Toshiba 80GB with my new 120GB Fujitsu drive..., it slipped into place nicely but i did notice that the Toshiba had four short wires protruding out to the right of the contacts, which my new Fujitsu didn't have... hmmmm...?!
anyways, tried to install Mac OSX on the new drive, booted up with the install disc... went thru' chosing the language (English), agreed to the second step... but when it came time to install, there was NO icon at all in the box where i am asked where i want to install it!!!
so i go to disk utilities, and see that my Fujitsu HD is indeed recognized, but none of the buttons in first aid are active... so i can't check it.
i figured that had to do with the four little wires, so i replaced the original Toshiba and made a reservation with Genius Bar to ask for assistance.
this afternoon, i explained my problem and was told the four wires have NOTHING to do with it... Lawrence (the genius) told me to (actually, first he said Apple does not recommend my doing this... and that i should go to a 3rd party computer store such as Dino to get help!) go back to disk utilities and partition, then erase this drive and then i will see the icon for this drive in the install box.
Well i did everything i was told to do and... still, there is no icon for my Fujitsu HD! :o(
I was able to partition, after which there was a disc0 under the Fujitsu drive on the left side of the disk utilities. When i go to system profiler, and click on ATA... it too shows the Fujitsu drive... but i cannot install because there is NOTHING to click on at the installation step! the "continue" button is not active and only the "back" button is actively mocking me!!!
i know many of you have successfully upgraded your hard drive... what am i doing wrong? Would a different brand work better? I know Seagate is quite popular, and OWC sells a Western Digital version as well as a Hitachi... do those four little wires make a difference? Would the Seagate come with those wires???
i am going crazy... thanks, and sorry for the long post, just wanted to let you know what i've done!
blue skies,
ps. please feel free to email me at [email protected] if you think that would be better! :o)

Hi,
...after getting back from school, my MacBook was STILL in the process of verifying and "supposedly" repairing... since i was gone for over 10 hours, i finally assumed the drive was either defective or just incompatible, and quit disk utility.
...this morning i went out and bought a new Seagate 120GB SATA (they didn't have 160GB SATA drives, only 160GB ultra-ATA drives) 2.5 inch HD. This one DID have those four wires to the right of the contacts... (i don't know how important they are), and after changing and exchanging the Toshiba/Fujitsu HDs, it was a breeze putting in the new Seagate drive.
Erased > patritioned > and sure enough, the icon showed up and the biggest smile showed up on my face as i finished installing! :o)
I contacted the original seller of my fujitsu hd (it was a 2.5 inch, 120GB, serial ATA notebook drive) and he was kind enough to say "just pack it up and send it back for a refund!" (minus shipping and re-stocking fees of course! :o)
Just wanted to mention that, the fujitsu hd WAS recognized by disk-utility and at the bottom left of the window it said that the fujitsu was "GUID partitioned"..., so i am still scratching my head as to why it didn't work?!
I want to thank everyone that offered advice, it was helpful and i feel more comfortable with my MacBook after this trying and very frustrating episode! :o)
blue skies,

I'm trying to install Mac OSX on an external drive with my Mac Mini

A few days ago, I picked up my new Mac Mini. I'm using the install disk included with the Mini in an attempt to install Mac OSX 10.4.5 onto my external hard drive - a LaCie d2 200GB.
The installer knows the LaCie is there - but it won't let me install it there. I had no problem doing this with my last Mac (Power Mac G4). Does anyone have any suggestions?
Mac Mini Duo Core 1.66Mhz Mac OS X (10.4.7) LaCie d2 Firewire Hard Drive 200GB

If you are using an Intel mac mini you need to change the partition scheme. Without doing this the Intel Macs cannot boot from the drive.
To do this you need to open Disk Utility, select your drive (not the partition), then select the Partition tab. In there you'll see an Options… button. Click on it and change the partition scheme to GUID Partition Table. Click OK and then apply the reparitioning.
Please be aware that by making this change you will be able to boot your Intel Mac from the drive although a PowerPC drive will no longer be able to use the drive as a boot drive.

10.5.8 update_'You cannot install Mac OS X Update on this volume.'

You cannot install Mac OS X Update on this volume. This volume does not meet the requirements for this update.
This is the message I get when I click on the hard drive I wan to install it on, I have two hard drives, neither want to work with it. the one with the osx 10.5 has 63 gb left and the empty one has 102gb left. Why is it doing this/ what should I do?

If you're not using the combo updater, use it instead.
(55808)

"You cannot install Mac OS X Update on this volume."

"You cannot install Mac OS X Update on this volume. This volume does not meet the requirements for this update."
This is the error I got when I tried to update my Macbook from OSX 10.5.6 to 10.5.7.
I downloaded this file (http://support.apple.com/kb/DL826)
A quick Google search suggested I get this one instead (http://support.apple.com/kb/DL827) The "Combo" update.
Well, the 10.5.7 Combo Installer didn't help either.
My friend suggested I try 10.5.8
Same error message again.
I really need to get at least 10.5.7 for software ASAP. I plan on getting Snow Leopard next month or so, but I really need at least 10.5.7 in the meantime. Any ideas?

Some things I've tried:
- I ran a Verify Disk in Disk Utility, and it said there are no problems.
- Update Logs haven't shown any errors, nor has my computer ever tried to download the update and failed, according to the log.
- I tried checking updates on a different account, no luck there.
So far, that's all I've tried. Some of the other solutions seem more drastic, and so I'll leave those up to the skilled Tech Support guys on my campus, I've got an appointment tomorrow.

Cannot install Mac OSx to harddrive

Similar Messages

Maybe you are looking for