Cannot Install Mac OSX upgrade from 10.5.1 to 10.5.5

Initially tried Software Update but this failed to complete. Stalled on "Configuring Installation".
Used Disk Utility to repair permissions.
Tried to manually update to 10.5.5 with downloaded file but this also failed, message:
"You cannot install Mac OS X Update on this volume. This volume does not meet the requirements for this update."
Should I reinstall 10.5.1?
(Apple CN 108449442)

Derek Miles wrote:
Initially tried Software Update but this failed to complete. Stalled on "Configuring Installation".
Used Disk Utility to repair permissions.
Tried to manually update to 10.5.5 with downloaded file but this also failed, message:
"You cannot install Mac OS X Update on this volume. This volume does not meet the requirements for this update."
Should I reinstall 10.5.1?
(Apple CN 108449442)
Did you try to install the complete combo update (601 MB) or the smaller one (310 MB)?
You need the larger one. The smaller one is only for updating from 10.5.4

Similar Messages

  • Cannot Install Mac OSX on this Computer!! HELPPPP!

    Well here is the situation. I have a PowerMac G4 (Digital Audio). i had it upgraded a year ago to a 1.53Ghz G4 Processor, 1.5 GB Ram, I have a 160GB HD, and a 40GB HD. All the firmware is up to date. i went to Install leopard and the OS didn't recognise my system configuration. i called Apple and well all i got was " That I basically made a custom PC and Leopard will not recognise the Hardware and configuration. "Cannot Install Mac OSX on this Computer" was the message I got
    So I had to revert Back to Jaguar and I'm hating it. Any help on this one, or should I cut my loses and sell Leopard?

    am currious too as i have a g4 dual processor 800 and am wondering if it will install on it. the dp has plenty of hp to run it. if yours is showing as a 1.5 in profiler should install. but one glitch could be many sonnet upgrades do a trade off and a faster processor but they down clock the fsb speed to get it. check and see if fsb is at least 133. i do pc service for a living and love mac for my own use but apple is a bit arrogant on it's software as to install specs and not offering a uninstaller option. on that windows is a lot more friendly and flexable.

  • Cannot install Mac OSx to harddrive

    cannot install Mac OSx to harddrive

    Plus what model of MBP are you attempt to do this install?
    What are the hardware specs on it?
    Allan

  • Cannot install mac OSX lion v.10.7 on mac mini

    I try to install mac OSX lion v.10.7 but they say u need atleast 2GB of memory in HD Machintosh, but i have more enought memory already.

    Hello, perhaps you're confusing RAM Memory with Disk Space?
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: iMac
    Model Identifier: iMac7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 6 GB
    Bus Speed: 800 MHz
    Boot ROM Version: IM71.007A.B03
    SMC Version (system): 1.21f4

  • HELP PLEASE cannot install Mac Osx

    hey I really need help please!
    I tried to modified my dock using my resources folder in the dock components but I surely did something wrong cause when I tried to click on time machine, it said that I need the right osx version.
    So I restarted my computer but it just wont start, i see the spinning gear over and over again. So i decided to reinstall mac os x tiger and to reupgrade to leopard afterwards.
    I restart m computer, hold C, get to the install process and when I need to choose my volume, I choose my HD, the one in the iMac but its says cannot install on it because of a Volumecheck problem...
    I really need to reinstall it without loosing my data on it I have some important photos for my work, I NEED THEM!
    HELP!

    Hello and welcome to the Apple boards
    If you have been using Time Machine, you can restore your system from it using the Leopard DVD and following the instructions on this link:
    http://www.peachpit.com/articles/article.aspx?p=1091577&seqNum=6
    You might first try booting from the DVD and repairing your HD first. The tools are in the Utility folder on the DVD
    You boot into the DVD by starting the computer and holding down the "C" key.
    Hope this helps a bit.

  • HT203322 Cannot Install Mac OSX Snow Leopard on MacBook 10.5.8 because Mac Hard Drive has Time Machine on It?

    I have an old MacBook (2006?) with OS 10.5.8 that I would like to upgrade to Mac OS X Snow Leopard, which I have on DVD. When asked to select what disk I would like to install the upgrade to, my only option is the Mac Hard Drive icon with a big yellow triangle/exclamation point saying I cannot install there because I am running Time Machine on that disk.
    I have run searches using "Find" for any vestige of Time Machine left on my computer. I have deleted the icon from my dock. I have tried to run disk utility to delete just the Time Machine but can't target just that. I have rebooted after each of these steps. Nothing changes.
    It is Kafka-esque because I need to upgrade my OS so that I can upgrade my browser so I can read the question section of apple.com related to upgrading to Snow Leopard.
    Thanks for any help you can give.

    Thanks, seventy one. I do have everything backed up everything to an external hard drive, plus the most important stuff also on Dropbox. Given the age of this laptop, and given that I've been the sole owner and almost the sole user, I'm mystified as to why/how Time Machine is on my internal hard drive. I agree with you that it would defeat its purpose to back up files to the computer they're already on! It reminds me of the time a friend of mine put a bucket under his sink because there was a big leak in the pipe that was splashing into the cupboard. When the bucket was full, he took it out from under the sink and poured it down the sink to empty it. Ooops. Using Time Machine to back up files on the same computer it's installed on feels the same to me.
    It's interesting because I've found versions of my question posted by many other users, but I can't find an adequate response. Mostly, there are responses that don't directly address the problem, which in turn are rated by the petitioners as 50% or so helpful.
    I'm not sure what I'll do beyond searching a little more on the web and sleeping on it. In all seriousness, though, thank you for your help and suggestions. These Apple Help Boards are amazing, in large part owing to people like you who respond to strange plaints like my own.

  • Cannot install CS5.5 (upgrade from CS3) on my new laptop

    I need to install CS5.5 on my new laptop. I downloaded the installation files, but i cannot install.
    My CS5.5 Design Standard is an update from an CS3 Desing Premium which i purchased some years ago.
    I do have the serial of my old CS3, but unfortunaltely i lost the installation dvd
    Do i first need to install CS3? Or can i just put the serial somewhere?
    Thanks Martin

    Martin_Shoe wrote:
    I need to install CS5.5 on my new laptop. I downloaded the installation files, but i cannot install.
    Can you elaborate?
    First question: is your CS5.5 for Windows or Mac? Is your new laptop a Windows or a Mac? You cannot use a Windows serial number to license a CS5.5 on a Mac and vice versa.
    Assuming you're installing on the same platform, there's no need to re-install CS3 first.
    All you need to do is install CS5.5 (the code for an upgrade version is the same as for a full version), enter your CS5.5 upgrade serial number then enter your CS3 serial number when prompted.

  • Need Urgent Help Cannot install Mac OSX 10.6 on 20" intel imac

    I recently purchased an intel imac an intel mac pro from an auction. When i purchased the macs i was told that no operating systems will installed and i would need to purchase and install mac osx10.
    I purchased the mac osx10.4.6 family pack from the apple store online.
    i put the new disc in the mac and restarted holding down c.
    for some reason nothing happens and i get folder with a question mark.
    I have tried this several times but nothing seems to work.
    I am a complete novice with macs and migrsting from pc.
    thanks

    You cannot buy a retail version of Tiger that will install on any Intel Macs. You must have the original installer discs that came with the computer. You should not have purchased the computers without them nor should they have been sold to you without them.
    The only option you have is to call AppleCare or go to a local Apple store and see if you can purchase the discs needed for each computer (there are different versions for each model.)
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Cannot install Mac OSX Snow Leopard on Macbook Pro Unibody with a new SSD

    Hi, I just bought a SSD (OCZ Vertex LE 120GB) to replace the stock SATA HDD. The problem is that the Mac OSX installation fails. I tried a lot of times with no success. Both clean install from DVD or restoration from a Time Machine backup fails.
    The problem doesn't happen if I put the same SSD into a PC to install a Linux or Windows. I've read something saying the problem to be at EFI 1.7, SATA bus and even SATA cable in the Macbook Pro. Can anyone help in this issue?

    IgorOzz wrote:
    Hi OrangeMarlin, thanks for answering and trying to help me in this issue. Well, The SDD is well formated by Disk Utility and GUID partition as well. I tried to clone my HDD to the SDD by using the Disk Utility RESTORE option. By doing this I could boot up from SDD but somethings didn't work well (iPhone crashed at every start), Finder sometimes, and other apps...
    Maybe the disk utility restore option isn't the best way to do that. I'm gonna try the following steps:
    - Carbon Copy to clone my HDD to SDD;
    - Update SDD FW to the last one (but I need to install it on a Windows machine first);
    - Downgrade EFI FW back to 1.6 (not sure if I'll proceed to this step).
    I was thinking about SATA bus and cables because I've read some issues pinpointing to this as the culprit, since the Macbook's SATA wouldn't be able to handle 3Gbps SATA II speeds.
    Now, a little question: Why you say to be not recommended to install the new drive internally? What if, after using the SSD or HDD for a while and the system crashes I need to reinstall Mac OSX? I think it's supposed to be installed from the scratch by the DVD installer. Isn't it?
    Again, thanks... and waiting more replies...
    Do one step at a time, and I highly recommend not "downgrading" the EFI. The unintended consequences might make you throw your MBP out the window.
    Yes, use Carbon Copy Clone. Then try to boot from the cloned drive. Hold Option at startup, and it will give you a choice.
    If it works, then put it in your MBP. If it doesn't boot, then go to step two, repeat clone, and try again.
    My 2010 MBP runs at 3Gbps. I think prior to the 2010 models, Apple had not qualified any drives, other than the ones they put in the MBP's, that could work with 3Gbps drives. You may have one that doesn't.

  • Cannot install on g4 upgraded from 400Mhz to 1.2 Ghz processor

    I'm attempting to install Leopard without success. I've have a g4 (originally 400Mhz but upgraded to 1.2 Ghz) Upon attempting to install it just plainly states (cannot install 10.5) I am currently running 10.3.9 and have 1.7MB ram
    Any suggestions? PLEASE HELP! I'm dying to install it
    Thanks!!!

    After taking it to the shop and paying $81.00 to find out that there is nothing wrong with it, it stopped smelling hot after a month or so. Still working fine. Go figure.

  • I am trying to format my macbook pro hard drive and every time I get a window that says "Cannot instal Mac OSX on this Hard Drive." What do I do?

    The only options it gives me is to restart or restore from back up which isn't what I want to do... HELP?!

    Provide information relative to the issue like which MBP model, what OS is running on it, what OS are you trying to install on it and where did you get the OS installer disk from then perhaps someone could help.

  • Cannot install Mac OSX v10.5 Leopard.

    After booting up with Leopard DVD, I get an error message saying that the OS cannot be installed on this computer. I have enough memory. System REquirements state that I need 867MHz, but I was told that having Dual 533 would be okay. Does anyone know anything about this?
    Thank you!!
    carol

    LowEndMac has a page related to this.

  • Can not install Mac OSX Update Combo10.4.5 PPC

    I have a clean installation of Tiger on a Power Mac G4 (AGP graphics) with Sonnet 1 ghz processor upgrade, updated to 10.4.3 by running Software Update. No other updates available at this time.
    So I downloaded MacOSXUpdCombo10.4.5PPC.dmg and it stops at "Select a Destination."
    "You cannot install Mac OSX Update Combined (Power PC) on this volume. This volume does not meet the requirements for this update."
    I must have installed this update previously, to get to 10.4.6, to install Adobe CS3 which REQUIRES 10.4.6.
    Now I can't figure out how I got this update installed - sorry if this has been posted previously.
    This isn't my main machine, thankfully, but I use it as a spare in the studio to transfer images to.
    Can anyone help me get this OS updated to 10.4.6?
    I don't have the original processor, so re-installing it isn't an option.
    Thanks.

    No, I wouldn't ignore them, I think we really have more messed up than just this, and if any of these steps fix it, we'll likely need new downloads.
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
    May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
    http://docs.info.apple.com/article.html?artnum=107120
    I only use Software Update to see what is needed, then get them for real via...
    http://www.apple.com/support/downloads/
    That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
    If all the above fails, then it appears to be time for an Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
    http://docs.info.apple.com/article.html?artnum=107120
    Just be sure to select Preserve Users & Settings.

  • Can I use an OSX 10.6.3 install disk to upgrade from OSX 10.5.8

    Can I use an OSX 10.6.3 install disk to upgrade from OSX 10.5.8

    Yes. And, see below:
    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion — System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • How to make a image file from Pre installed Mac osx ? "PLEASE HELP :("?

    hey guys ..Thanks u for the time.
    So i have this eMac which has crashed and i have got may hands on another eMac.. and it works
    ... the only problem is.. I can take my eMac to the working eMac to do Target Mode or any thing...
    So Help me..
    My question is .. Is there a way to make a .DMG image file from pre installed mac osx OR
    Is there a way to may a recovery disc??

    You can use Carbon Copy Cloner to copy everything from the working eMac onto the non-working eMac while the working eMac is running. If your eMac will still do target mode into the working one, you can download the above software, select the booted drive as the source drive, and your eMac's drive as the target, however it is possible this will not work.
    When you say your eMac crashed, what exactly happened?  It is possible that the hard drive in your eMac failed or is failing, so in order to get it running again you would need to replace the hard drive.  On the eMac, this repair is somewhat involved, and you have to be very careful because it exposes the CRT, which has several areas which can be extremely dangerous to touch if not properly handled.  CRTs retain a great deal of voltage, even when unplugged, sometimes for weeks, and they can give you a nasty shock if you touch them in the wrong place.
    Also keep in mind that cloning from the working computer to the non-working computer will ERASE any data that you have stored on that eMac, so if you don't have it backed up anywhere, you may want to attempt that with target mode before proceeding.
    Good luck!

Maybe you are looking for