Cannot install my HP laser jet 1225n.

Cannot install my HP laser jet 1225n. The software installs but does not show in print and scan and cannot be added in print and scan. Message received as follows.Can't install the software for the Hewlett-Packard HP LaserJet CP1525N because it is not currently available from the Software Update server.
Pleae help

Hi,
Download and install teh Full Feature Software from HP below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-107388- 1&cc=emea_middle_east&dlc=en&lc=en&os=219&product=4052977&sw_lang=
After completing the installation be sure to reboot your Mac, then click the Apple icon and select Software Update, be sure to select any listed HP Update to ensure you use the latest drivers.
Please let me know of any problem,
Shlomi

Similar Messages

How do i install a hp laser jet 4l printer on windows7

how do i install a hp laser jet 4l printer on windows7 Where do I get the drivers

The driver is delivered through Windows Update as described here.
You could also use the Windows 7 driver finder tool at http://www.hp.com/go/tools.
If you do not have a parallel port on your Windows 7 machine you may need a USB-parallel converter cable. The models mentioned in the posts tagged here have been verified by users to work in Windows 7.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I-cannot-print-with-HP-Laser-Jet-Professional-P-1102w/m-p/489258

How can I initialize my Laser Jet Professiional P 1102w printer?

Frielinghaus
Welcome to the HP Community Forum.
Frielinghaus wrote:
How can I initialize my Laser Jet Professiional P 1102w printer?
Perhaps I do not understand your inquiry?
Is the printer exhibiting a Hardware issue?
If yes, the following might be useful:
The Printer Will Not Turn On or Respond When the Power Button or Power Switch is Pressed
============================================================================
If the printer is OK and you just need to install printer software and "get things going":
You can find the Full Feature Software for your printer here for several flavors of Windows, Mac OS. There are apparently even drivers for Linux: HP LaserJet Pro P1102w Printer
On your printer Support Pages, you can also find links to your User Guides, How-to Pages, Troubleshooting, and other interesting bits.
Click the Kudos Thumbs-Up to show you appreciate the help.
Click Accept as Solution when the Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

I cannot print with HP Laser Jet Professional P 1102w

I was using Windows XP on the first hard disk of my computer. I could use your Laser Jet with this Operation System. But the difficulties with Windows XP are growing and I want to Install a newer Windows Operating System ???- On the second hard disk of my computer I am using Linux Ubuntu. I tried in vain to use your printer with the Linux Ubuntu system. Therefore I want to use your printer by sending the data to be printed as attachment of an E-Mail with ePrint .
But by now I get:
SERVER ERROR
Oops! Something just went wrong with our server.
Try refreshing the page. ???

Hello there @Frielinghaus !
Thank you for posting on the HP Forums!
I can see you experiencing some server issues when trying to setup the ePrint feature on your LaserJet P1102w printer. I should be able to provide some help with that!
The first thing to check when troubleshooting any LaserJet printer is to confirm it is plugged into the wall directly and not a power surge protector. The next thing to check is to ensure the printer has the most up to date firmware version. I can provide a link to the download for the Laserjet P1102w firmware update for Windows XP. When running a firmware update on the printer it must be plugged in temporarily with the USB cable.
For the firmware update click here: Firmware update for HP Laserjet P1102w.
If you are still experiencing the server connection issue when trying to enable ePrint then you may be able to change the DNS server the printer is using!
To change the DNS:
1. Access the printers Embedded Web Server (EWS) by typing its IP address in the address bar of the web browser.
2. Once connected to the EWS click the Network Tab at the top of the window.
3. Click "IPV4 configuration" on the left side.
4. Click Manual IP.
5. Under DNS address configuration enter the New DNS server.
6. For preferred DNS address enter "8.8.8.8".
7. For Alternate DNS address enter "8.8.4.4".
8. Press apply and try connecting to ePrint again!
Please post back and let me know if this worked for you!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

How to install a HP Laser Jet 4 Plus

I have successfully installed my HP PhotoSmart 7520 but I have a workhorse printer that I would like hooked up to my new HP Notebook also......it is a Newlett Packard Laser Jet 4 Plus. It is not listed as a choice and I would really like to use it. Any help would be appreciated. Thank you.

Any of the laserjet models that have a front panel (touchscreen) and the option to print a Supplies Status page can provide this information. The Supplies Status page shows how many pages each of the current toner bins have printed since installation.
Make sure to check that the printer has a Supplies Status page in the Reports submenu of the Setup menu. Hope this helps.
example: the Laserjet Pro 200 M276nw has this feature.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

I cannot install my HP office jet 6500 software, even though i have followed the online instructions from hp. How can I install the CD?

I have recently tried to install the CD software for the above printer and although I can print wirelessly. The CD presents an error message saying that MAC os 10.7 is not supported. I have followed the instructions to install a software update from apple but no printer update appears in my updates window. What should I do? Can anyone forward me a link to the update?
Any help would be much appreciated.
Alex

Have you tried contacting HP tech support?
http://support.apple.com/kb/dl907

I can not install my wireless P2015 dn Laser Jet Printer with the MS 7 software.

For three years the P2015 worked "wireless"on my Lenovo T60p with microsoft XP. It ran through my wireless router and printed fine.
I just updates the software to MS 7 (32 bits, 2007) and the printer will not run off the router. I hooked the printer up directly by cord, downloaded the printer drivers off the MS 7 software and it worked fine while attached. The router works fine with MS 7 for the internet and the email on my computer and the two other computers (still MS XP) on the router.
I tried installing the 2015nd Laser Jet using the CD driver it came with originally and I come to a screen "searching for available printers" and there is nothing in the box below to choose from (blank screen). It goes though a "searching for available printers" routine and finally the message come up "No printers were found". This same thing occurs when I try downloading from the HP Web site drivers. I get the same screens and the same results.
What do I need to do? (I am a beginning level of computer knowledge)
This question was solved.
View Solution.

Hi Edronenburg,
Even though the software installer can not find your printer automatically, you can still install the printer if you know the IP address.
If you press and hold the "Go" button on the control panel for several seconds (until the lights begin flashing) the config page will print. On this page you can find the IP address of the printer that has been assigned by the router. During the software install, instead of having the installer automatically search for the printer, choose to manually enter the IP address. This should allow the software install to complete successfully.
(Although I am an HP employee, I am speaking for myself and not for HP.)

HP Laser Jet 1536dnf MFP

Why does my computer recognize my HP Laser Jet 1536dnf MFP as Universal Printing PLC6? And how can I install the HP Laser Jet 1536dnf MFP if it s not on any list, I don't have disc and is recognized as the wrong MF printer?

Hi ballard,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand the printer name is showing the Universal Printing PLC6 driver and not the Laserjet M1536.
I will be happy to help you.
During the install it pulled the Universal driver instead of the Laserjet driver.
Did you download and install the drivers?
Here is the URL for the drivers if you haven't already installed them.
HP LaserJet Pro M1536dnf Multifunction Printer Drivers. Select the operating system and click next.
Click on Driver - Product Installation Software and download the drivers.
Delete the PCL driver and install the download.
We can see if we can update the driver through the device manager if the full software was already installed from the download to get the right driver installed.
How do I get into Windows Device Manager?
Click on View and select show hidden devices.
Look for the printer entry and right click and select update the driver.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected?
Please let me know the results if you are still having issues.
Thank you for posting on the HP Forums.
Have a great weekend!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Printer Laser Jet 4L driver installation

I still can not install the Printer Laser Jet 4L with serial ports on windows XP. Is any one have this drivers?

@EdmondH
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Cannot install sofware for HP Office jet 8625 Pro on my Dell Inspiron 15 with windows vista?

Cannot
install
software for HP Office jet 8625 Pro software on my Dell Inspiron Core 2 processor with Windows Vista?

Hi @akcarl
What happens when you try to install? Does it freeze, do you get an error message, or perhaps you simply can not find the appropriate software to download?
Please post back with some additional detail so I can better assist you. Thanks.
In the meantime, if the issue is nothing but finding the software, you may use the following link; OJ8620_198.exe
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Install HP Laser Jet printer 1022 in w7 - 32 bit system

hi
Anyone can help to install HP Laser Jet 1022 printer to windows 7, 32 bit system.. because i can't install it correctly.
is thier any compatibility issue between the printer and the O.S ??
Thanks,
Regards,

Hi polyester,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More
I understand that you are having a problem with installing a Windows XP 32-bit printer driver. I will try my best to help you resolve this issue. If you have an older version of this print driver or other older LaserJet print drivers installed, then this could be causing an issue.
Use the HP Officejet Pro Software and Driver Removal Utility and do a level 3 uninstall to remove all the printer software and drivers.
Here is a document for Installing the Printer Software in Windows XP for a USB Cable Connection that explains the steps to installing the software and drivers.
Here is the link for the HP LaserJet 1020 and 1022 Printer series Hostbased Plug and Play Basic Driver download page.
I hope this information helps, please let me know how it goes.
Thank you,
I worked on behalf of HP.

Hp 1000 j110 deskjet installed worked fine tried to install hp laser jet 1000 none work xp pro

hp 1000 j110 deskjet installed worked fine tried to install hp laser jet 1000 now none work win xp pro
any ideas printer port probs???
Thanks
John

Hello jpihl1
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413Hello jpihl1
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Help, Upgraded to Yosemite and now my HP Laser jet 1320 printer will not work!

Two days ago I upgraded to Yosemite on my Imac. Now my HP 1320 Laser jet will not print at all!!! I need a printer for my eBay business ASAP and this is not good. The printer is a driver version 19.8 Is it compatible with the new program? I am so frustrated.

Hello k1watt,
Thanks for using Apple Support Communities.
From your post I see that you're unable to print to your HP LaserJet 1320 series after upgrading to Yosemite on your Mac. I defintely understand how frustrating this is, especially since printing is vital to your business. The printer driver version 19.8 is the most current version available. To troubleshoot the issue however where you're unable to print, please follow the steps in the article below.
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel.Note:If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
UseSoftware Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Deletethe affected printer, thenaddthe printer again.
If the issue persists, try these additional steps:
Resetthe printing system, then add the printer again.
If the issue still persists,resetthe printing system again. Download and installyour printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Troubleshooting printer issues in OS X - Apple Support
OS X: Printer and scanner software available for download - Apple Support
Take care,
Alex H.

Lost printing to HP Laser Jet following installation of upgrade 10.8.2

I noticed from the BB that this issue is already out there, but I am not sure what course of action to take.   I have a IMac with 10.8.2 installed as part of an upgrade from 10.7.x. My HP Color Laser Jet CM1312nfi MFP worked fine.   Once the upgrade nothing.   From the HP support web site, I read the following:
HP LaserJet and Color LaserJet Printers, MFPs, and All-in-Ones - Products not supported or with limited support in OS X 10.8 (Mountain Lion)
which leads me to believe that this printer is "done" and cannot be made to work with this OS.   I am looking for a work around for a perfectly good printer. HP, while not asked has not offered a solution and my take from Apple is that the new OS is supposed to take care of all the issues, both old and new.   I am willing to uninstall any an all software if it will solve the problem.   I am not interested in returning to another older OS.   I did install the new patch provided by Apple, it did not work and I may need to redo if not done correctrly.   It did not solve the problem.   Has anyone found a workable solution to this problem?   I would be appreciative to any suggestions that will help.   Thanks

Thanks for this response. I was able to get the printer working following a bunch of "re-tuning" of setting and the like.   To be clear, I did install this patch from Apple.   While Apple or HP is not clear, I found that it was better to clean house of all old printer (HP listings), remove sharing from the network settings, installing the patch at least twice and then selecting the printer a second time around.   Lo and behold, I selected " Print a Test Page" and after what I thought was a long wait, got the completed test page. As indicated on the HP web page, I did lose the ability to scan via the HP Director software. Not sure that will be a problem as I can still scan to the external memory card and save the image(s).   Progess and change has its cost and I will have to accept this change as part of that evolution.   The new Mac OS has removed many of the folders etc that I was familiar with from earlier times.   The good news is that I can print and that is what really matters.   Thanks again for your suggestion.

Printing barcode in HP laser jet through smartform

Hi folks,
can i print barcode in HP laser jet P3005 PCL6 by using smartform???
plz advice.
regards
smita

Yes, you can.. I guess, HP laser jet P3005 series PCL6 can print bar codes.
I am attaching the list of BARCODE supported printers
List of device types in SAP Releases 4.6x/6.xx/NW04/NW04s
OSS NOTE : 8928
Installation of new device types ********************
Many device types are appended as a zip-attachment to this note.
README.TXT contains information about these device types and codepages.
README_UPLOAD.TXT contains information on how to import the device
types.
PRINTER DRIVERS AND DEVICE TYPES:
In R/3, a distinction is made between "printer driver" and "device type". The device type consists of all the attributes defined for an output device. For correct access, these must be made known in the R/3 system. They cover aspects such as control commands for font selection, page size, character set selection, character set used and so on. One of these attributes is the printer driver to be used by SAPscript (R/3 forms processor) for this particular printer.
If your printer is not specified in the list below, ask the manufacturer if the printer is compatible with one of the defined printers or if it can be used with another emulation (for example, Postscript).
If the printer is not compatible or cannot be operated using an emulation, you must create a new device type (if the printer is not compatible). To print from SAPscript, you must choose one of the existing printer drivers.
At present, there are five SAPscript printer drivers. They include:
for HP-PCL5 (for example, HP Laserjet 3,4,5,6 series)
for PostScript printers (PS level 2)
for PRESCRIBE (for example, Kyocera FS-1500)
for device types SWIN/SAPWIN/xxSWIN/xxSAPWIN
for all other models.
The last driver is known as the "standard driver". It cannot provide absolutely precise positioning on the paper and does not support proportional fonts. Printer drivers are relevant for forms output with SAPscript. For the output of ABAP lists special printer drivers are only used as of Release 4.5A. They are anchored in the C kernel and are developed and maintained exclusively by SAP.
In the spool environment, device types refer not only to printers but also other output devices, for example, fax machines. Device types support specific printers or printer models. Device type definitions are stored completely in tables and can be individually adapted, modified or enhanced. If SAP performs such an adjustment for a customer, it constitutes a consulting service, and is generally charged seperately. On the other hand, the list of device types, above all in conjunction with SAP's hardware partners, is continually expanded.
COMPATIBLE PRINTERS:
Some printer models have been so successful on the market that many OEM products, clones and compatibles are also listed. You can often use compatible printers with R/3 by entering the printer definition of the original. Since complete compatibility is extremely rare, SAP can offer no assurances regarding the usability of compatible printers. This also applies to follow-up models made by the original producer.
LIST OF PRINTERS:
This is the list of device types supplied by SAP in different Releases. Most of these device types use "Western European" or "North American" character sets. Some device types in newer Releases however, also support other character sets and language areas such as Russian or Czech.
The device types named in this list are supported in the standard R/3 System as of the release mentioned.
If an OCR-A font (prerequisite for check printing) or an OCR-B font is supported in the R/3 device types, this is indicated. However, this generally requires additional font cassettes or firmware for the printer involved, since few printers have an OCR-A font "built in." For additional information about this, contact the printer manufacturer.
Check related notes attached for addition information on printer supportin R/3.
Related notes:
Note 135894 contains information on printing labels on special label printers.
Note 05196 contains information on printing bar codes with SAPscript
Note 94233 contains information on printing MICR font with SAPscript
Note 62178 contains information on device types for the Japanese version of the R/3 System.
Note 77891 contains information on device types for IBM-SCS printers on the IBM AS/400 hardware platform.
Note 98477 informs you on device types for printers by the manufacturer PSi.
Note 107938 contains information on device types for printers by the producer Tally.
Note 141719 contains information on device types for printers from the producer Printronix.
Note 141914 contains information on device types for printers from the producer Lexmark.
Note 153879 contains information on compatible printer models of producer EPSON.
Note 154494 contains information on compatible printer models of producer Genicom.
Note 199166 contains information on device types for printers from the producer Hewlett Packard.
Note 214187 contains information on device types for printers from the producer Océ.
Note 398236 contains information on device types for printers from the producer Sharp.
Note 408189 contains information on device types for printers from the producer Konica Minolta.
Note 436609 contains information on device types for printers from the producer Xerox.
Note 458047 contains information on device types for printers from the producer Ricoh.
Note 485240 contains information on device types for printers from the producer SAVIN.
Note 485244 contains information on device types for printers from the producer NRG.
Note 516687 contains information on device types for printers from the producer Lanier.
Note 516669 contains information on device types for printers from the producer Gestetner.
Note 878109 contains information on device types for printers from the producer Danka.
ASCIIPRI
Generic device type for line printers that can be used in urgent cases where no customized printer definition exists for a line printer. It contains no printer-specific control commands, but merely CARRIAGE RETURN, NEWLINE and FORMFEED commands. It uses the standard 7 bit ASCII character set (USASCII).
COMPU960
Device type for BULL line printers COMPUPRINT 4/66, as well as COMPUPRINT 960. Character set used: IBM 2 German.
DECLA75P
Device type for the DEC line printer DEC LA75 Plus.
DECLN07
Device type for the DEC laser printers LN07 and DECLaser 1100.
HP256X
Device type for all Hewlett-Packard line printers in the HP256... series. Based on the HP manual describing the HP256X series, OCR-A is included in this printer definition, but the printer needs an additional firmware/font cassette.
HP2930
Device type for Hewlett-Packard's HP2930 line printer.
HPDJ500
Device type for Hewlett-Packard's DeskJet 500 ink jet printer.
HPLJIIID
Device type for Hewlett-Packard's LaserJet IIIP, III, IIID and IIIsi printers, as well as the HP LaserJet 4 series. OCR-A and OCR-B are included in the printer definition, but the printer needs an additional firmware/font cassette. The "HP LaserJet barcodes & More Font Cartridge" is needed for this. Barcode printing from R/3 is not supported.
HPLJSTND
Generic device type for printers that have an HP LaserJet emulation but cannot be operated via the definitions HPLJ4, HPLJIIID or HPLJ_II.
HPLJ_II
Device type for the Hewlett-Packard LaserJet II laser printer series. OCR-A and OCR-B are included in the printer definition, but the printer needs an additional firmware/font cassette. The "HP LaserJet barcodes & More Font Cartridge" is needed for this. Barcode printing from R/3 is not supported.
KYOF1000
Device type for the Kyocera F-1000 laser printer. OCR fonts are not supported. Bar code printing is supported.
KYOF1200
Device type for the Kyocera laser printers F-1200 and F-1200S. OCR fonts are not supported. Barcode printing is supported.
MT600
Device type for the Mannesmann-Tally line printer MT600. Character set used: US-ASCII (that is no German umlauts).
MT600GER
Device type for the Mannesmann-Tally line printer MT600. Character set used: German. OCR-A and OCR-B (German standard) are included in the printer definition; the printer must be upgraded with these fonts.
MT600NDA
Device type for the Mannesmann-Tally line printer MT600. Character set used: Norwegian / Danish. OCR-A and OCR-B (German standard) are included in the printer definition; the printer must be upgraded with these fonts.
OKI341
Device type for the OKI Microline 3410 line printer.
POSTSCPT
Device type which is used for pure PostScript printers. Barcode printing from R/3 is not supported.
S4440XTG
Device type for the SEL Alcatel line printer 4440XT. Character set used: German.
SAPWIN
Generic device type for printers linked (or also fax devices) to PCs running under MS Windows 3.1, Windows 95 or Windows NT by means of the R/3 program SAPLPD. Windows printer drivers are used and the character set is ISO 8859-1. Barcode printing from R/3 is possible with the additional installation of a third-party DLL (see Note 25344), but is not supported in the standard system. OCR-A and OCR-B fonts are possible with an appropriate TrueType font (see also Note 48803).
Important Note:
As of Release 3.0E, you can use SAPWIN to:
Print proportional fonts and lines/boxes in SAPscript
Print black and white as well as color TIFF graphics (with the 32-bit SAPlpd on Windows 95 and Windows NT only).
See Note 39031.
SWIN
Generic device type for printing/faxing using MS Windows with SAPlpd. It is available as of Release 3.1H. Device type SWIN differs from SAPWIN in the layout of X_... formats for ABAP/4 list printing. The font size and line spacing were adjusted, particularly for color list printing.
In addition, SAPWIN contains an expanded list of SAPscript printer fonts for current releases, for example, Greek and Russian.
SNI4009
Device type for the Siemens-Nixdorf SNI 4009 line printer.
SNI4010
Device type for the Siemens-Nixdorf SNI 4010 line printer. OCR-A is included in the printer definition, but the printer needs an additional firmware/font cassette.
SNI9014
Device type for the Siemens-Nixdorf SNI 9014/12 line printer. OCR-A and OCR-B are included in the printer definition. The 9014/12 has OCR-A and OCR-B font installed as a default.
SNIZD13
Device type for the Siemens-Nixdorf SNI ZD13 line printer. OCR-A is included in the printer definition. The ZD13 has OCR-A font installed as a default.
CIP1000
Device type for C.ITOH line printers CI-1000 and CI-500. The IBM Proprinter II/XL emulation and IBM character set 2 (multilingual) are used.
EPESCP
Device type for all 24 or 48 element EPSON printers that use the control language ESC/P. Character set IBM 437 is used. OCR-A/OCR-B are included in the printer definition. However, some printers also require an additional firmware/font cassette.
EPESCP2
Device type for EPSON printers that use the control language ESC/P2. The character set IBM 850 (multilingual) is used. OCR-A/OCR-B are included in the printer definition. However, some printers also require an additional firmware/font cassette.
EPESCP9
Device type for all 9-pin dot matrix EPSON printers that use the control language ESC/P. The standard ASCII character set is used with some additional international characters.
EPLQ550
Device type for the EPSON LQ-55 dot matrix printer. OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware/font cassette.
HP2300
Device type for the Hewlett-Packard 2300 line printer series. OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware/font cassette.
HPLJ4
Device type for all printers in Hewlett-Packard's LaserJet 4 series (this includes LaserJet 4/4m, 4Plus/4mPlus, 4V/4mV, 4si). OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware/font cassette. The "HP LASERJET barcodes & MORE FONT CARTRIDGE" or a SIMM module is required. Barcode printing from R/3 with HP LaserJet 4 Series printers requires SIMM module "JetCAPS Intelligent Barcode SIMM" and is supported.
IBM239X
Device type for the IBM 238X/239X Plus line printer series from Lexmark. This includes the types IBM 2380 Plus, IBM 2381 Plus, IBM 2390 Plus, IBM 2391 Plus. The IBM emulation and character set IBM 850 are used.
IBM4226
Device type for the IBM 4226 line printers from Lexmark. The IBM emulation and the character set IBM 850 are used.
IBM4232
Device type for the IBM 4232-302 line printer from IBM. The 4202 emulation and the character set IBM 2 are used. OCR-A/OCR-B are included and supported. Barcode printing is not supported.
IBM6408
Device type for the IBM 6408-A00 line printer from IBM. The PropPrinter III XL emulation and the character set IBM 850/IBM 2 are used. OCR-A/OCR-B are included and supported. Barcode printing is not supported.
IBMAFP
Device type for IBM's external SAP2AFP converter. The R/3 spool output is converted to AFPDS format and passed to IBM AFP software. IBMAFP can only be used in conjunction with spool-exit (access method Z when defining the device type). Selection of printers directly connected to R/3 is not possible. IBMAFP must be used for 240 pel AFP printers.
Character set is ISO 8859-1 (Latin 1). OCR-A and OCR-B are supported, as well as barcodes.
IBMAFP is for use on R/3 UNIX and Windows NT platforms.
IBMEFP is the proper device type for AS/400 R/3 Platforms and uses the EBCDIC character set.
IBMAFP3
Device type for IBM's external SAP2AFP converter that converts the R/3 spool output to an AFPDS format and sends it to IBM AFP software.IBMAFP3 can be used only in conjunction with spool-exit (access method Z when defining the device type). Selection of printers connected via R/3 is not possible. IBMAFP3 must be used for 300 pel AFP printers.
Character set is ISO 8859-1 (Latin 1). OCR-A and OCR-B are supported, as well as barcodes.
IBMAFP3 is for use on UNIX and Windows NT platforms.
IBMEFP3 is the proper device type for AS/400 R/3 Platforms and uses the EBCDIC character set.
IBMSCS
Device Type IBMSCS supports the "basic IBMSNA Character String" data stream for printers that are connected under IBM OS/400. IBMSCS is only supported for the use under SAP R/3 on hardware platforms IBM AS/400.
LX4039
Device type for the Lexmark laser printer series 4039. OCR-A/OCR-B are included in the printer definition. However, the printer requires an additional firmware/typeface cassette. "HP LASERJET barcodes & MORE FONT CARTRIDGE" is required. Barcode printing from R/3 is not supported.
KYOFS150
Device type for the Kyocera laser printer FS-1500, FS-3500, FS-1550+. OCR fonts are not supported. Barcode printing is supported.
NECP30
Device type for the NEC matrix printers P20/P30. The character set used is IBM codepage 850 (multilingual).
NECP72
Device type for the NEC matrix printers P62/P72. The NEC Pinwriter level 2 emulation and the character set IBM codepage 850 (multilingual) are used. OCR-A/OCR-B are included in the printer definition. However, the printer requires an additional firmware/font cassette.
NECPW
Device type for the NEC 48-pin Pinwriter P5XL, P9XL, P6/P7, P6plus/P7plus, P2200, P2plus, P60/P70, P90, P20/P30, P22Q/P32Q, P42/P52, P62/P72. The character set IBM codepage 850 (multilingual) is used.
SNI4011
Device type for the 24-pin version of the SNI 4011 dot matrix printer. The EPSON LQ-850+ emulation and character set IBM codepage 850 (multilingual) are used. OCR-A/OCR-B are included in the printer definition. The printer has these fonts built in.
SNI20XX8
Device type for the Siemens-Nixdorf 2050-8, 2075-8 and 2090-8 laser printers (HP-LaserJet emulation). For operation with R/3, you need to obtain a special font diskette for the printer from SNI. This contains the fonts required, including OCR-A and OCR-B. Barcode printing from R/3 is not supported.
MT2033
Device type for the Mannesmann-Tally T2033 matrix printer. Uses MTPL+IBM Proprinter emulation and IBM codepage II for the character set. OCR-A/OCR-B are included in the printer definition. These fonts are built into the printer at the factory.
MT2045
Device type for the Mannesmann-Tally T2045 matrix printer. Uses MTPL+IBM Proprinter emulation and IBM codepage II for the character set. OCR-A/OCR-B are included in the printer definition. These fonts are built into the printer at the factory.
DEVICE TYPES NEW TO RELEASE 3.1G:
HPDJ660
Device type for the color inkjet printer Hewlett-Packard DeskJet 660C. Lists are printed in color. OCR-A, OCR-B and barcode printing from R/3 are not supported.
HPDJ850
Device type for the color inkjet printer Hewlett-Packard DeskJet 850C. Lists are printed in color. OCR-A, OCR-B and barcode printing from R/3 are not supported.
HPLJ5SI
Device type for Hewlett-Packard's LaserJet 5Si. OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware. The "HP LASERJET barcodes & MORE FONT CARTRIDGE" or a SIMM module is required. Barcode printing from R/3 with HP LaserJet 5Si requires and supports SIMM module "JetCAPS Intelligent Barcode SIMM".
MT6045
Device type for the Mannesmam-Tally T6045 dot matrix printer. Uses MT660 emulation and character set Latin-1. OCR-A/OCR-B are included in the printer definition. These fonts are built into the printer at the factory.
Important note: For use with R/3 the printer's standard character set must be set to Latin-1.
NEW DEVICE TYPES IN RELEASE 3.1H:
MT691
Device type for the Mannesmann-Tally T691 dot matrix printer. Uses MT660 emulation and character set Latin-1. OCR-A/OCR-B are included in the printer definitions. These fonts are built into the printer at the factory.
NEW DEVICE TYPES IN RELEASE 3.1I:
SAPWIN5
Device type for printing cyrillic characters (character set ISO 8859-5, for example Russian) with SAPlpd/Microsoft Windows. This device type works exclusively with the Russian Windows 95 or NT 4.0 (not with Windows 3.1). To use it, a 32 bit version of the SAPlpd with a number 4.00 or higher is required.
DEVICE TYPES IN RELEASE 4.0A:
HPLJ5
Device type for all printers of the Hewlett-Packard LaserJet 5 printer series (LaserJet 5/5m, 5P/5MP, 5C) except for HP LaserJet 5 SI. OCR-A/OCR-B are included in the printer definitions. However, the printer needs an additional firmware/font cassettes. The "HP LASERJET BarCodes & MORE FONT CARTRIDGE" or a SIMM module is required. Barcode printing from R/3 with printers of the HP LaserJet 5 series requires and supports SIMM module "JetCAPS Intelligent Barcode SIMM".
Important note: HPLJ5 uses new 4.0A features (scalable fonts under PCL-5) and can only be used in Release 4.0A and higher releases!
I2HP4
Device type for Eastern Europe for all printer of the Hewlett Packard LaserJet 4 printer series (for example, LaserJet 4/4m, 4Plus/4mPlus, 4V/4mV, 4Si). Uses character set "ISO 8859/2" (Latin 2). OCR-A/OCR-B are included in the printer definitions, however, the printer requires additional firmware/font diskette. The "HP LASERJET BarCodes & MORE FONT CARTRIDGE" or a respective SIMM module is required. For the barcode print from R/3 with printer of the HP LaserJet 4 series the SIMM module "JetCAPS Intelligent Barcode SIMM" is required and supported.
I2SWIN
Device type for Eastern Europe for printing under Microsoft Windows via a 32 bit SAPlpd. I2SWIN uses the character set ISO 8859/2 (Latin 2). To use I2SWIN, the following preconditions are required:
SAPlpd 32 bit version, from 4.00
Microsoft Windows NT 4.0 or eastern European Win95 (Latin 2 version)
R/3 Release 3.0E or higher
Important note: Microsoft Windows 3.1 (SAPlpd 16 bit) is NOT supported!
I7SWIN
Device type for Greece for printing under Microsoft Windows via SAPlpd 32 bit. I7SWIN uses character set "ISO 8859/7" (Greek). Requirements for operation of I7SWIN are:
SAPlpd 32 bit as of Version 4.00
MS Windows NT 4.0 or Greek Windows 95
R/3 Release 3.0E or newer
Important note: MS Windows 3.1 (SAPlpd 16 bit) is not supported!
NEW DEVICE TYPES IN RELEASE 4.5A:
HPLJ4000
Device type for the Hewlett Packard LaserJet 4000 printer and
related models such as LaserJet 5000, 8000, 8100 and 8150.
HPLJ4000 uses character set "ISO 8859/1" (Latin 1). For the barcode print from R/3 with HP LaserJet 4000, the DIMM module "JetCAPS Intelligent Barcode DIMM" is required and supported. In addition to the barcodes this DIMM module contains the OCR-A and OCR-B fonts that are supported by HPLJ4000.
Device type HPLJ4000 offers improved output of ABAP print lists by using a special PCL-5-printer drivers and can therefore only be used in Releases as of 4.5A.
I9HP4
Device type for Turkey for all printers of the Hewlett-Packard LaserJet 4 printer series (among others LaserJet 4/4m, 4Plus/4mPlus, 4V/4mV, 4Si). I9HP4 uses character set "ISO 8859/9" (Latin 5). OCR-A/ OCR-B are contained in the device type, however, the printer needs extra firmware or an extra font cartridge. The "HP LASERJET BarCodes & MORE FONT CARTRIDGE" or a corresponding SIMM module is needed for this. The SIMM module "JetCAPS Intelligent Barcode SIMM" is a requirement for printing barcodes from R/3 with printers of the HP LaserJet 4 series and is supported.
KYOFS170
Device type for the Kyocera laser printer FS-1700. OCR fonts are not supported. Barcode printing is supported.
Device type KYOFS170 offers improved output of ABAP print lists by using a special PRESCRIBE-II-printer driver and can therefore only be used in Releases as of 4.5A.
POST2
New device type for PostScript-level-2-printer which can be used alternatively to POSTSCPT. Barcode printing and OCR printing from R/3 is not supported.
Device type POST2 offers an improved output of ABAP print lists by using a special PostScript-L2-printer driver and can therefore only be used in Releases as of 4.5A.
NEW DEVICE TYPES IN RELEASE 4.6A:
IXLINK
Device type for the external XLink/SAP translator of Xerox, which translates R/3 SAPGOF data to Xerox format and transfers data to the Xerox production printer. IXLINK can only be used if the XLink/SAP translator is being used. You cannot access printers, which are connected via R/3!
OCR-A and OCR-B fonts as well as bar codes are supported.
NEW DEVICE TYPES IN RELEASE 4.6C:
HPLJ8000
Device type for Hewlett Packard LaserJet 8000, 8000N, 8000DN printers. HPLJ8000 uses character set "ISO 8859/1" (Latin 1). For the barcode print from R/3 with HP LaserJet 4000, the DIMM module "JetCAPS Intelligent Barcode DIMM" is required and supported. In addition to the barcodes this DIMM module contains the OCR-A and OCR-B fonts that are supported by HPLJ4000.
Device type HPLJ8000 offers improved output of ABAP print lists by using a special PCL-5-printer driver and can therefore only be used in Releases as of 4.5A.
HPLJ1100
Device type for Hewlett Packard LaserJet 1100 printer. HPLJ1100 uses character set "ISO 8859/1" (Latin 1). OCR-A/B as well as barcode print from R/3 are not supported.
Device type HPLJ1100 can only be used in Releases as of 4.6C.
I9SWIN
Device type for Turkey und printing with MS Windows via SAPlpd 32 bit. I9SWIN uses character set "ISO 8859/9" (Latin 5). Preconditions for using I9SWIN:
SAPlpd 32 bit as of version 4.00
MS Windows NT 4.0 or Turkish Windows 95 (Latin 5 Version)
R/3 Release 3.0E or newer
Important note: MS Windows 3.1 (SAPlpd 16 bit) is not supported!
IBMNP
Device type for laser printer IBM InfoPrint 20 as well as the IBM Network Printer 12, 17, 24, IBM InfoPrint 32, InfoPrint 40. OCR- and MICR fonts are supported by the device type. The printer needs an additional module for these fonts. "Barcode-, MICR and OCR A+B SIMM for IBM Network Printers" is required. Read Note 133660 also. Bar code printing from R/3 is not supported.
Important note: IBMNP uses new 4.0A features (scaleable font under PCL-5) and can only be used in maintenance level 4.0A and higher.
NEW DEVICE TYPES IN RELEASE 6.10:
IBMIP12
Device type for laser printer IBM InfoPrint 12. IBMIP12 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP21
Device type for laser printer IBM InfoPrint 21. IBMIP21 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP32
Device type for laser printers IBM InfoPrint 32 and InfoPrint 40. IBMIP32 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP2K
Device type for production laser printer IBM InfoPrint 2000 with PCL-5 emulation. IBMIP2K uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP60
Device type for laser printer IBM InfoPrint 60. IBMIP60 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP70
Device type for laser printer IBM InfoPrint 70. IBMIP70 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBM4247
Device type for line printer IBM 4247. The printer's 4247 emulation and character set IBM2 is used. OCR-fonts are supported. Bar code printing from SAP is not supported.
Attention: Please follow note 396462 when installing the printer.
NEW DEVICE TYPES IN RELEASE 6.20:
IBM6400
Device type for line printer IBM 6400. The printer's "P-Series" emulation and character set PC850 is used. OCR-fonts are supported. Bar code printing from SAP is not supported.
Attention: Please follow note 396462 when installing the printer.
HP1200
Device type for HP LaserJet 1200/1220. HP1200 uses character set "ISO 8859/1" (Latin 1).
HP1200 is compatible with all releases from 4.0A.
HP2200
Device type for HP LaserJet 2200. HP2200 uses character set "ISO 8859/1" (Latin 1).
HP2200 is compatible with all releases from 4.0A.
HP2250
Device type for HP Business Inkjet 2250. HP2250 uses character set "ISO 8859/1" (Latin 1).
HP2250 is compatible with all releases from 4.5B.
Attention: Business Inkjet 2200 is not compatible with HP2250.
HP2500
Device type for HP DeskJet 2500C with PCL-5 option. HP2500 uses character set "ISO 8859/1" (Latin 1).
HP2500 is compatible with all releases from 4.0A.
HP3200
Device type for HP LaserJet 3200m. HP3200 uses character set "ISO 8859/1" (Latin 1).
HP3200 is compatible with all releases from 4.0A.
HP4100
Device type for HP LaserJet 4100. HP4100 uses character set "ISO 8859/1" (Latin 1).
HP4100 is compatible with all releases from 4.0A.
HP4550
Device type for HP LaserJet 4550 (color laser). HP4550 uses character set "ISO 8859/1" (Latin 1).
HP4550 is compatible with all releases from 4.5A.
HP8150
Device type for HP LaserJet 8150. HP8150 uses character set "ISO 8859/1" (Latin 1).
HP8150 is compatible with all releases from 4.0A.
HP8550
Device type for HP LaserJet 8550 (color laser). HP8550 uses character set "ISO 8859/1" (Latin 1).
HP4550 is compatible with all releases from 4.5A.
HP9000
Device type for HP LaserJet 9000. HP9000 uses character set "ISO 8859/1" (Latin 1).
HP9000 is compatible with all releases from 4.0A.
NEW DEVICE TYPES IN RELEASE NW04:
BRHL
Device type for Brother laser printer HL-2460. This device type is compatible to other Brother laser printers, see below.
OCR-A and OCR-B fonts as well as bar codes are supported.
BRHL is compatible with all releases from 4.5A.
IP2085
Device type for the IBM Infoprint 2085 Laser printer with printer language PCL-5. OCR font and bar code printing from SAP are not supported.
IP2085 is compatible with all releases 4.5A and higher.
IP2085P
Device type for the IBM Infoprint 2085 Laser printer with printer language PostScript. OCR font and bar code printing from SAP are not supported.
IP2085P is compatible with all releases 4.5A and higher.
IP2105
Device type for the IBM Infoprint 2105 Laser printer with printer language PCL-5. OCR font and bar code printing from SAP are not supported.
IP2105 is compatible with all releases 4.5A and higher.
IP2105P
Device type for the IBM Infoprint 2105 Laser printer with printer language PostScript. OCR font and bar code printing from SAP are not supported.
IP2105P is compatible with all releases 4.5A and higher.
LEXT622
Device type for the Lexmark T622 laser printer. OCR-fonts and bar code printing from SAP are supported if the printer is equipped with a corresponding option (note 119471).
LEXT622 is compatible with all releases 4.5A and higher.
LEXW820
Device type for the Lexmark W820 laser printer. OCR-fonts and bar code printing from SAP are supported if the printer is equipped with a corresponding option (note 119471).
LEXW820 is compatible with all releases 4.5A and higher.
LEX4227P
Device type for the Lexmark 4227plus line printer. The device type supports the Latin-1 character set. For using the device type, the IBM emulation must be set in the printer.
OCR fonts and barcode printing from SAP are not supported.
LEX4227P is compatible with all releases.
I5LEX
Device type for Cyrillic printing (e.g. Russian) with Lexmark T522 laser printer. Lexmark T522 natively supports Cyrillic fonts and character set ISO 8859-5.
OCR-fonts are not supported. Bar code printing is supported (with a bar code DIMM, see note 119471).
I5LEX is compatible with all releases 4.0A and higher.
CNLX522
Device type for Lexmark T522 laser printer with add-on "Simplified Chinese DBCS font DIMM kit" (Lexmark product number 09H0690). The device type supports Simplified Chinese. OCR-fonts and bar code printing from SAP are not supported.
CNLX522 is compatible with all releases 4.0A and higher.
JPLX522
Device type for Lexmark T522 laser printer with add-on "Japanese DBCS font DIMM kit" (Lexmark product number 13K0227). The device type supports Japanese character set. OCR-fonts and bar code printing from SAP are not supported.
JPLX522 is compatible with all releases 4.0A and higher.
KPLX522
Device type for Lexmark T522 laser printer with add-on "Korean DBCS font DIMM kit" (Lexmark product number 10G1705). The device type supports Korean character set. OCR-fonts and printing of bar codes from SAP are not supported.
KPLX522 is compatible with all releases 4.0A and higher.
TWLX522
Device type for Lexmark T522 laser printer with add-on "Traditional Chinese DBCS font DIMM kit" (Lexmark product number 09H0691). The device type supports traditional Chinese character set. OCR-fonts and bar code printing from SAP are not supported.
TWLX522 is compatible with all releases 4.0A and higher.
HP5000
Device type for HP LaserJet 5000. HP5000 uses character set "ISO 8859/1" (Latin 1).
HP5000 is compatible with all releases from 4.0A.
HP23
Device type for HP LaserJet 2300. HP23 uses character set "ISO 8859/1" (Latin 1).
HP23 is compatible with all releases from 4.5A.
HP3000
Device type for HP business inkjet 3000. HP3000 uses character set "ISO 8859/1" (Latin 1).
HP3000 is compatible with all releases from 4.5A.
HP4300
Device type for HP LaserJet 4200 and HP LaserJet 4300. HP4300 uses character set "ISO 8859/1" (Latin 1).
HP4300 is compatible with all releases from 4.5A.
HP4600
Device type for HP color LaserJet 4600. HP4600 uses character set "ISO 8859/1" (Latin 1).
HP4600 is compatible with all releases from 4.5A.
HP5100
Device type for HP LaserJet 5100. HP5100 uses character set "ISO 8859/1" (Latin 1).
HP5100 is compatible with all releases from 4.5A.
HP5500
Device type for HP color LaserJet 5500. HP5500 uses character set "ISO 8859/1" (Latin 1).
HP5500 is compatible with all releases from 4.5A.
HP9500
Device type for HP color LaserJet 9500. HP9500 uses character set "ISO 8859/1" (Latin 1).
HP9500 is compatible with all releases from 4.5A.
I2HPPS
Device type for certain HP LaserJet models with PostScript emulation (see Note 575916). I2HPPS supports character set "ISO 8859/2" (Latin 2).
I2HPPS is compatible with all releases as of 4.0A.
Barcode printing and OCR fonts are not supported.
CAN105
Device type for Canon laser printer imageRUNNER 105. CAN105 supports character set ISO 8859-1 (Latin 1).
CAN105 is compatible with all releases as of 4.5A.
OCR-fonts are supported, barcode printing is not supported.
CAN22
Device type for Canon laser printers imageRUNNER 2200/2800/3300/3300i. CAN22 supports character set ISO 8859-1 (Latin 1).
CAN22 is compatible with all releases as of 4.5A.
OCR-fonts are supported, barcode printing is not supported.
CAN5
Device type for Canon laser printers imageRUNNER 5000/5000i/6000. CAN5 supports character set ISO 8859-1 (Latin 1).
CAN5 is compatible with all releases as of 4.5A.
OCR-fonts are supported, barcode printing is not supported.
CAN85
Device type for Canon laser printers imageRUNNER 8500/7200/85. CAN85 supports character set ISO 8859-1 (Latin 1).
CAN85 is compatible with all releases as of 4.5A.
OCR-fonts are supported, barcode printing is not supported.
CN105PS
PostScript device type for Canon laser printer imageRUNNER 105. CN105PS supports character set ISO 8859-1 (Latin 1).
CN105PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CN22PS
PostScript device type for Canon laser printers imageRUNNER 2200/2800/3300/3300i. CN22PS supports character set ISO 8859-1 (Latin 1).
CN22PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CN5PS
PostScript device type for Canon laser printer imageRUNNER 5000/5000i/6000. CN5PS supports character set ISO 8859-1 (Latin 1).
CN5PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CN85PS
PostScript device type for Canon laser printer imageRUNNER 8500/7200/85. CN85PS supports character set ISO 8859-1 (Latin 1).
CN85PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CAN400
PCL5 device type for Canon laser printer imageRUNNER 330/400. CAN400 supports character set ISO 8859-1 (Latin 1).
CAN400 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CN400PS
PostScript device type for Canon laser printer imageRUNNER 330/400. CN400PS supports character set ISO 8859-1 (Latin 1).
CN400PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CANC32
PCL5 device type for Canon color laser printer Color imageRUNNER C3200. CANC32 supports character set ISO 8859-1 (Latin 1).
CANC32 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
NEW DEVICE TYPES IN RELEASE SAP NetWeaver 04s:
ARM205
PCL-5 device type for Sharp laser printer AR-M205. ARM205 uses character set ISO 8859-1 (Latin-1).
ARM205 is compatible with all releases as of 4.5A.
OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
ARM276
PCL-5 device type for Sharp laser printer AR-M276. ARM276 uses character set ISO 8859-1 (Latin-1).
ARM276 is compatible with all releases as of 4.5A.
OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
ARM450
PCL-5 device type for Sharp laser printer AR-M450. ARM450 uses character set ISO 8859-1 (Latin-1).
ARM450 is compatible with all releases as of 4.5A.
OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
ARM550
PCL-5 device type for Sharp laser printer AR-M550U. ARM550 uses character set ISO 8859-1 (Latin-1).
ARM550 is compatible with all releases as of 4.5A.
OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
ARC262P
PostScript device type for Sharp color laser printer ARC-262M. ARC262P is compatible with all releases as of 4.5A.
OCR fonts are not supported.
CAN2220
PCL5 device type for Canon laser printer imageRUNNER 2220n/2220i/3320n/3320i. CAN2220 supports character set ISO 8859-1 (Latin 1).
CAN2220 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CN2220P
PostScript device type for Canon laser printer imageRUNNER 2220n/2220i/3320n/3320i. CN2220P supports character set ISO 8859-1 (Latin 1).
CN2220P is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CAN5020
PCL5 device type for Canon laser printer imageRUNNER 5020n/5020i/6020n/6020i. CAN5020 supports character set ISO 8859-1 (Latin 1).
CAN5020 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CN5020P
PostScript device type for Canon laser printer imageRUNNER 5020n/5020i/6020n/6020i. CN5020P supports character set ISO 8859-1 (Latin 1).
CN5020P is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC3100
PCL5 device type for Canon color laser printer imageRUNNER C3100. CNC3100 supports character set ISO 8859-1 (Latin 1).
CNC3100 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CNC31PS
PostScript device type for Canon color laser printer imageRUNNER C3100. CNC31PS supports character set ISO 8859-1 (Latin 1).
CNC31PS is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC3220
PCL5 device type for Canon color laser printers imageRUNNER C3220/C2620. CNC3220 supports character set ISO 8859-1 (Latin 1).
CNC3220 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CNC322P
PostScript device type for Canon color laser printers imageRUNNER C3220/C2620. CNC322P supports character set ISO 8859-1 (Latin 1).
CNC322P is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC6800
PCL5 device type for Canon color laser printers imageRUNNER C5800/C6800. CNC6800 supports character set ISO 8859-1 (Latin 1).
CNC6800 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CNC68PS
PostScript device type for Canon color laser printers imageRUNNER C5800/C6800. CNC68PS supports character set ISO 8859-1 (Latin 1).
CNC68PS is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC31E
PCL5 device type for Canon color laser printer imageRUNNER C3100 with imagePASS-E1 controller. CNC31E supports character set ISO 8859-1 (Latin 1).
CNC31E is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC31EP
PostScript device type for Canon color laser printer imageRUNNER C3100 with imagePASS-E1 controller. CNC31EP supports character set ISO 8859-1 (Latin 1).
CNC31EP is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC322E
PCL5 device type for Canon color laser printer imageRUNNER C3220/C2620 with imagePASS-C1 V.2 controller. CNC322E supports character set ISO 8859-1 (Latin 1).
CNC322E is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC322EP
PostScript device type for Canon color laser printer imageRUNNER C3220/C2620 with imagePASS-C1 V.2 controller. CNC322EP supports character set ISO 8859-1 (Latin 1).
CNC322EP is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC68E
PCL5 device type for Canon color laser printers imageRUNNER C5800/C6800 with imagePASS-D1 controller. CNC68E supports character set ISO 8859-1 (Latin 1).
CNC68E is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC68EP
PostScript device type for Canon color laser printers imageRUNNER C5800/C6800 with imagePASS-D1 controller. CNC68EP supports character set ISO 8859-1 (Latin 1).
CNC68EP is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CN2270
PCL5 device type for Canon laser printers imageRUNNER 2270/2870/3570/4570. CN2270 supports character set ISO 8859-1 (Latin 1).
CN2270 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is supported with usage of the optional barcode printing kit.
CN2270P
PostScript device type for Canon laser printer imageRUNNER 2270/2870/3570/4570. CN2270P supports character set ISO 8859-1 (Latin 1).
CN2270P is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
DL3100
PCL5 device type for DELL color laser printer 3100cn. DL3100 supports character set ISO 8859-1 (Latin 1).
DL3100 is compatible with all releases as of 4.5A.
OCR-fonts and Barcodes are not supported.
DL3100P
PostScript device type for DELL color laser printer 3100cn. DL3100P supports character set ISO 8859-1 (Latin 1).
DL3100P is compatible with all releases as of 4.5A.
OCR-fonts and Barcodes are not supported.
DL5100
PCL5 device type for DELL color laser printer 5100cn. DL5100 supports character set ISO 8859-1 (Latin 1).
DL5100 is compatible with all releases as of 4.5A.
OCR-fonts and Barcodes are not supported.
DL5100P
PostScript device type for DELL color laser printer 5100cn. DL5100P supports character set ISO 8859-1 (Latin 1).
DL5100P is compatible with all releases as of 4.5A.
OCR-fonts and Barcodes are not supported.
HP3700
Device type for HP color LaserJet 3700. HP3700 supports character set ISO 8859-1 (Latin 1).
HP3700 is compatible with all releases as of 4.5A.
HPBI23
Device type for HP business inkjet 2300. HPBI23 supports character set ISO 8859-1 (Latin 1).
HPBI23 is compatible with all releases as of 4.0A.
HP9055
Device type for HP LaserJet 9055mfp. HP9055 supports character set ISO 8859-1 (Latin 1).
HP9055 is compatible with all releases as of 4.5A.
HP9065
Device type for HP LaserJet 9065mfp. HP9065 supports character set ISO 8859-1 (Latin 1).
HP9065 is compatible with all releases as of 4.5A.
I7HP4
Device type for HP LaserJet printers with "Greek Font DIMM" (add-on module with Greek fonts). Information can be found under www.hp.com/go/sap/drivers. I7HP4 supports character setISO 8859/7 (Greek).
I7HP4 is compatible with all releases as of 4.6B.
HP4250
Device type for HP LaserJet 4250 printer. HP4250 supports character set ISO 8859-1 (Latin 1).
HP4250 is compatible with all releases as of 4.5A.
HP1160
Device type for HP LaserJet 1160 printer. HP1160 supports character set ISO 8859-1 (Latin 1).
HP1160 is compatible with all releases as of 4.5A.
HP1320
Device type for HP LaserJet 1320 printer. HP1320 supports character set ISO 8859-1 (Latin 1).
HP1320 is compatible with all releases as of 4.5A.
HP2430
Device type for HP LaserJet 2430 printer. HP2430 supports character set ISO 8859-1 (Latin 1).
HP2430 is compatible with all releases as of 4.5A.
HP3030
Device type for HP LaserJet 3030 printer. HP3030 supports character set ISO 8859-1 (Latin 1).
HP3030 is compatible with all releases as of 4.5A.
HP4650
Device type for HP Color LaserJet 4650 printer. HP4650 supports character set ISO 8859-1 (Latin 1).
HP4650 is compatible with all releases as of 4.5A.
HP5550
Device type for HP Color LaserJet 5550 printer. HP5550 supports character set ISO 8859-1 (Latin 1).
HP5550 is compatible with all releases as of 4.5A.
HP9850
Device type for HP 9850mfp. HP9850 supports character set ISO 8859-1 (Latin 1).
HP9850 is compatible with all releases as of 4.5A.
HPLJ9050
Device type for HP LaserJet 9050 printer. HP9050 supports character set ISO 8859-1 (Latin 1).
HP9050 is compatible with all releases as of 4.5A.
HPOJ9130
Device type for HP officejet 9130. HPOJ9130 supports character set ISO 8859-1 (Latin 1).
HPOJ9130 is compatible with all releases as of 4.0B.
HP4345
Device type for HP LaserJet 4345mfp. HP4345 supports character set ISO 8859-1 (Latin 1).
HP4345 is compatible with all releases as of 4.5B.
HP9040
Device type for HP LaserJet 9040mfp. HP9040 supports character set ISO 8859-1 (Latin 1).
HP9040 is compatible with all releases as of 4.5B.
HP9050
Device type for HP LaserJet 9050mfp. HP9050 supports character set ISO 8859-1 (Latin 1).
HP9050 is compatible with all releases as of 4.5B.
HP9500M
Device type for HP LaserJet 9500mfp. HP9500M supports character set ISO 8859-1 (Latin 1).
HP9500M is compatible with all releases as of 4.5B.
IP2060
Device type for the IBM Infoprint 2060ES Laser printer with printer language PCL-5. IP2060 supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2060 is compatible with all releases 4.5A and higher.
IP2060P
Device type for the IBM Infoprint 2060ES Laser printer with printer language PostScript. IP2060P supports character set ISO 8859-1 (Latin 1).OCR font and bar code printing from SAP are not supported.
IP2060P is compatible with all releases 4.5A and higher.
IP2075
Device type for the IBM Infoprint 2075ES Laser printer with printer language PCL-5. IP2075 supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2075 is compatible with all releases 4.5A and higher.
IP2075P
Device type for the IBM Infoprint 2075ES Laser printer with printer language PostScript. IP2075P supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2075P is compatible with all releases 4.5A and higher.
IP2090
Device type for the IBM Infoprint 2090ES Laser printer with printer language PCL-5. IP2090 supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2090 is compatible with all releases 4.5A and higher.
IP2090P
Device type for the IBM Infoprint 2090ES Laser printer with printer language PostScript. IP2090P supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2090P is compatible with all releases 4.5A and higher.
IP2105E
Device type for the IBM Infoprint 2105ES Laser printer with printer language PCL-5. IP2105E supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2105E is compatible with all releases 4.5A and higher.
IP2105EP
Device type for the IBM Infoprint 2105ES Laser printer with printer language PostScript. IP2105EP supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2105EP is compatible with all releases 4.5A and higher.
OKI6100
Device type for OKI laser printer B6100. OKI6100 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI6100 is compatible with all releases as of 4.5A.
OKI8300
Device type for OKI laser printer B8300. OKI8300 supports character set ISO 8859-1 (Latin 1). OCR-fonts are not supported. Barcode printing is supported with an OKI add-on product.
OKI8300 is compatible with all releases as of 4.5A.
OKI9500
Device type for OKI color laser printer C9500. OKI9500 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI9500 is compatible with all releases as of 4.5A.
OKI4350
Device type for OKI laser printer B4350. OKI4350 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI4350 is compatible with all releases as of 4.5A.
OKI5400
Device type for OKI color laser printer C5400. OKI5400 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI5400 is compatible with all releases as of 4.5A.
OKI6300
Device type for OKI laser printer B6300. OKI6300 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI6300 is compatible with all releases as of 4.5A.
SML1451, SML1451

Cannot install my HP laser jet 1225n.

Similar Messages

Maybe you are looking for