Cannot install N-Gage application on 5320 XM

Hi
I am trying to install N-Gage [ver: 1.01(27)] on my Nokia 5320 phone (FW. ver: 4.13), but when it is just about to finish installation I receive Unknown Error -2315096729.
What is the problem?
What can I do to istall N-Gage successfully?
Thanks!

I'm not quite sure if this will work for you, but when I bought a NetGear PTV3000 Wireless Display Adapter, I could not get the Intel WiDi software to connect to the NetGear.
I found that the problem was with the Intel PROSet/Wireless WiFi software. When you install the PROSet driver, you *MUST* install the "Intel My WiFi Technology" or else the Intel WiDi drivers will not find the WiDi displays.
See the following post on the Intel forums: http://communities.intel.com/thread/31556
I hope this helps.

Similar Messages

Cannot install age-restricted applications

Everything was working fine but now (since the last update) I cannot install/update age-restricted applications. Sometimes it is working again, sometimes it is not.
I rebooted the iphone, restrictions are disabled.
Do you experience the same issue?
Iphone 4 iOS 4.2.1

Hello customer,
First I check the compatibility in Windows 7 Compatibility Center website. Except for the Age Of Empires III Gold Edition, most editions of this games should be working well in Windows 7.
According to your problem description, I'd suggest you installing the Age of empires 3 in Compatibility mode. Right-click on the setup executable/installer file -> Properties and select the Compatibility tab; click the checkbox before Run this program in Compatibility mode for option and select Windows Vista in the list-down box; then try installing the device driver via Run as administrator. In addition, you can use the Windows XP option for testing.
Good Luck!
Andy

E61: Cannot install nokia maps application

I used to have Nokia Maps application installed in my E61 SD card, together with the maps. Then I had to re-format the card, loosing all information.
Once I try again to install Nokia Maps application in my handset, there is an "update error", and the application is not install. My guess: there is somewhere a registry that lists nokia maps application as already installed, and will not allow to re-install again.
I will appreciate your help.
Thanks!

Nokia have recently released a new version of Nokia Maps as well as MapLoader.
I would recommend that you download these (you can find them at http://www.nokia.com/maps) and try again.
First download the MapLoader program and try to delete any kind of previously stored map information on your phone, then download the appropriate Map program for your phone, and finally re-load MapLoader to load the relevant maps for your country on the E61.
Regards,
Edward

Cannot install OpenGL|ES application in Sony Ericsson K510i

Hello,
I've just finished a simple ogles application with WTK and was just going to test in my mobile. Unfortunently it just says "Action failed" (or whatever it is in english).
I've tested that my mobile does support ogles, but that fact shouldn't affect it being installed or not.
I'm trying to install the app with .jar file.
I have enough space, memory and so on.
Thank you in advance.

Note : The MIME Type of the JAR files in the Server
Side is "java-archive"That's wrong. It should be:
jad: text/vnd.sun.j2me.app-descriptor
jar: application/java-archive

Cannot install Blackberry desktop application

I have a Windows 7 operating system. I have now tried three times to install the Blackberry desktop application from the Blackberry website with the latest version of the program on my PC (including a reboot) to no avail. I only get a message (from Soluto) that the Blackberry program has crashed and there are no solutions yet. Any ideas on how to correctly install this program?

Hi and Welcome to the Community!
I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
You may or may not need all that is there, but perhaps the Run As Administrator portion will help your situation.
If needed though, it starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I cannot install dmg file applications to my ibook

Gud day guys ! I'm having trouble installing dmg applications on my ibook ie. yahoo messenger, firefox browser even safari 3

To add to Advanced User and Roam's always sound advice ...
Whenever you download and install software, make sure your Mac meets the minimum requirements. For instance, I just checked Yahoo Messenger, here are the min requirements: System requirements: 10.4 (Tiger) or 10.5 (Leopard), Intel or PowerPC. So if you are running Panther, 10.3, then the Yahoo Messenger .dmg file won't allow you to install the software.
Firefox: System Requirements
Mac OS X 10.4 or later
256MB of RAM or higher recommended
200MB hard disk space
Safari 3.1.2 requires Tiger 10.4.11
Carolyn
Message was edited by: Carolyn Samit

Cannot install crystal report server - please help

hello users,
i cannot install the server application. i put the dvd in the drive and choose german install and directly cames an error.
"Fehler bei der Übernahme der Transformationspakete. Stellen Sie sicher, dass die Transformationspfade gültig sind."
in english nearly:
"error by assumption of transformationpacket. make sure, that the transformationpath are validly"
sorry for my english but i am a long-established german

Hello Marcus,
I believe this is an 'error applying transforms' type of error.
Running the MSI installer from command line should typically resolves the problem.
From the cmd line, at the root of the CD drive, type:
msiexec.exe /i win32\businessobjects.msi TRANSFORMS=:1031
Please note that the 1031 indicates German. 1033 indicates English.
There is more information in the following SAP Note:
1202481 - Error Applying Transforms - Verify that the specified transform paths are valid.
Thanks.
Srinivas

Cannot install ITunes--Mesage is "Apple Application Support was not found. Apple application Support is required to run ITunes Helper. Please uninstall ITunes, then install ITunes again. Error 2 (Windows Error 2)

Cannot install ITunes--Mesage is "Apple Application Support was not found. Apple application Support is required to run ITunes Helper. Please uninstall ITunes, then install ITunes again. Error 2 (Windows Error 2)

See Troubleshooting issues with iTunes for Windows updates.
tt2

Adobe Application Manager won't update on Win 8.1 - cannot install apps

Since updating this PC to Windows 8.1, the Adobe Application Manager which manages the Creative Cloud apps will not update itself, hence we cannot install or update CC apps (specifically, Acrobat).
On clicking the download button on the Acrobat page of CC, the Adobe Application Manager starts to update itself, then quits with the error:
We've encountered the following issues:
Adobe Application Manager failed to install.
[Quit]
Repeated attempts fail. We urgently need to admin several CC apps so to be forced to use the App Manager causes us substantial business interruption.
/src Illuminant NYC

Hi illuminantpartnersnyc ,
Please close all the Adobe application, browsers running at the back and try to install again. If still the same error please follow the mentioned steps:
1. Please navigate to C/Program Files(X86)/Common Files/Adobe/OOBE and rename to OOBE.old
Please go to C/User/User Name/App date/Local/Adobe/OOBE and rename it to OOBE.old
Log to to CC desktop: https://creative.adobe.com/products/creative-cloud and run as admin to install it.
If still the same error then please enable hidden admin: http://www.eightforums.com/tutorials/9650-built-administrator-account-enable-disable-windo ws-8-a.html and try to install again from hidden admin account.
Please review the log : http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html if still the error persists.
Regards,
Romit Sinha

I cannot install an application in the Applications folder without removing it first

For some time now, I have noticed that I cannot install an application into the application folder without first removing it from the folder. If I try to install it by dragging the icon to the application folder, I get a warning that the application can't be moved because the folder "Applications" can't be modified. I click on authenticate and enter the root username and password. I am warned that the application already exists in the location. I am asked if I want to replace the item. The options presented are "Keep both files", "Stop", and "Replace". I choose "Replace". I am then prompted for an administrator's name and password. I enter "root" and the root password. I then get this lengthy error message:
The operation can’t be completed because some items had to be skipped. For each item, choose File > Get Info, make sure “Locked” is deselected, and then check the Sharing & Permissions section. When you are sure the items are unlocked and not designated as Read Only or No Access, try again.
I checked the permissions and "locked" was already deselected. The permissions grant my regular user read and write permissions, "staff" read-only, and "everyone" read-only. If I add "admin" with read and write permissions, nothing changes, i.e. I get the same error. If I try to enter my user credentials, they are rejected. My user is not an admin user. Previously, when I enterered the root username and password, the operation would complete successfully.
Now if I first remove the application from the Applications folder, then drag the application to the folder, I am prompted for an administrator's name and password. When I enter it, the application is copied successfully.
I have tried fixing file and directory permissions from the disk utility, but that doesn't fix the problem.

When you say, "locked" was already deselected, I take it that you mean the small icon at the bottom right of the Get Info window displayed an open lock picture.
Have you tried locking it, then unlocking it again? I expect you will be able to lock it by simply clicking on the open lock icon, but to unlock it again you will need to supply an Admin password.
Odd that DU didn't fix it. That would be my first thought also. Suggest trying it again, if you haven't already done so.
Speaking of DU, have you verified your HDD?
My Applications folder permissions read -
System          Read and Write
admin           Read and Write
everyone      Read only
Message was edited by: El Deanio

Adobe Flash Player, version 10.1.102.64 installed, but I cannot access FP dependent applications

Adobe Flash Player, version 10.1.102.64 is installed, but I cannot access FP dependent applications (such as those on Facebook.)
I used the link you previously provided http://www.adobe.com/products/flashplayer/fp_distribution3.html
to download the FP .exe and it worked for 2 days, but is no longer working and I'm getting the same message for both Mozilla & IE. The only things I recall doing prior to FP not working again was 1) sign up for G Mail & 2) I used Save As to dwld a number of Images from Google. I also rolled back my PC a day, but that has not fixed the issue. I get the error both in IE & Mozilla.
I've reviewed HK Local Machine/Software/Adobe, but there is no file folder for Flash Player under HK HKEY_LOCAL_MACHINE/Software/Adobe {though there are folders for Shockwave, etc.) Does anyone know the KEYS for Flash Player, that I could add manually?
System Information:
Win XP Home, SP 2
IE 8.0.6001.18702
Mozilla 3.6.12
Flash Player 10.1.102.64
Thanks for any & all help!
Sidney

Can you see the Flash animation at http://www.adobe.com/software/flash/about/ ?
Does it show some version information under it?
Is Shockwave Flash object enabled in IE and FF?
What files do you have in C:\Windows\system32\Macromed\Flash?
Do you know that XP SP2 is no longer a supported OS?

Cannot install trial for Adobe Acrobat XI Pro on my computer - After I select download, I receive this message: This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance.

Cannot install trial for Adobe Acrobat XI Pro on my computer - After I select download, I receive this message: This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance. Have tried doing so from multiple browsers.
Please let me know how to download the trial version.
Thank you.

Try downloading Acrobat Pro XI using below link. Then try to installing it once again.
Download Acrobat products | Standard, Pro | XI, X

"You cannot install iWeb Update on this volume. A qualifying copy of iWeb was not found in /Applications" How do I fix this?

"You cannot install iWeb Update on this volume. A qualifying copy of iWeb was not found in /Applications." How do I fix this?

Version 2.0.4 is iWeb 08 and direct publishing via ftp is not available in iWeb 08 and never has been. You have the option of publishing to MobileMe, but you can publish via ftp, but you need to select the option publish to a local folder instead and then upload using Cyberduck, which is a free and dedicated ftp client.
If you want the inbuilt ftp function, then you will need to upgrade your iLife package to either iLife 09 which contains iWeb 09 or iLife 11, which also contains iWeb 09. For this, you need to purchase both of these packages. Either go to Amazon and try and get a copy of iLife 09 more cheaply or purchase iLife 11 directly from the Apple store.
This is what you will need to do and iWeb 08, which is the version you have, never has had built in ftp so that option will never be available to you unless you upgrade which you will have to pay for. Upgraded and updates are different things. Updates are just your normal run of the mill software updates and address bug fixes etc., whereas you will need to pay for full upgrades to other packages such as from iLife 08 to iLife 09 or 11.

Cannot install applications because the certificate for .... is not valid

Hello,
We have an in house enterprise app that can no longer update. We have taken the steps outlined here. These steps include installing a SSL certificate on the server from a trusted CA (GeoTrust) that shows as valid in Safari on OSX. Also the http to https redirect has been setup and verified in Safari and FireFox. Addtionally, the plist file's XML has been manually updated to point HTTPS. New installs work on iOS 7.1 without an issue.
However, the program has automatic updates that fail with the message "Cannot install applications because the certificate for .... is not valid".
The update process works like this:
A Plist file exists on the server that contains the version number of the build on the server. The app will download the file and parse it into a NSDictionary then the verison into an NSString. If the version doesn't match the current version then the user is prompted to install updates.
When the user says yes to the prompt a UIApplication is sent the Open URL message with a hard coded download URL that looks like this:
imts-services//?action=download-manifest&url=http://www.example.com/app/Release.plist
On iOS 7.1 the user will receive the message "Cannot install applications because the certificate for example is not valid". This error occurs even thought the certificate is valid. It almost looks like the URL isn't respecing the redirect from the server.
Has anyone else seen this? Is there a work around for it? Or do I have to redeploy the app (with an HTTPS in the hard coded URL)?

kkoishi, cskimble, OS 7.1 update forced all software installation services to use the HTTPS protocol instead of HTTP. Here is Apache config that adds certificate support and code for changing links in existing *.plist files automatically: http://cases.azoft.com/how-to-fix-certificate-is-not-valid-error-on-ios-7/
More ideas on Stack: http://stackoverflow.com/questions/20276907/enterprise-app-deployment-doesnt-wor k-on-ios-7-1/22527000#22527000

Cannot install applications because the certificate is not valid

cannot install applications because the certificate is not valid error from my iphone when trying to install an application, running the latest update 7.1

upload your app.plist to dropbox
get shared link of app.plist, like https://www.dropbox.com/s/qgknrfngaxazm38/app.plist
replace www.dropbox.com with dl.dropboxusercontent.com in the link, likehttps://dl.dropboxusercontent.com/s/qgknrfngaxazm38/app.plist
write your download.html like <a href="itms-services://?action=download-manifest&url=https://dl.dropboxusercontent.com/s/qgknrfngaxazm38/app.plist">INSTALL!!</a>
upload the download.html to dropbox
get shared link of download.html, like https://www.dropbox.com/s/gnoctp7n9g0l3hx/download.html
replace www.dropbox.com with dl.dropboxusercontent.com in the second link as well, likehttps://dl.dropboxusercontent.com/s/gnoctp7n9g0l3hx/download.html
Now, visit https://dl.dropboxusercontent.com/s/gnoctp7n9g0l3hx/download.html in your device, you can install the app like before.
WHAT A WONDERFUL WORLD！

Cannot install N-Gage application on 5320 XM

Similar Messages

Maybe you are looking for